- 23 11月, 2016 7 次提交
-
-
由 Andrew Donnellan 提交于
Fix the following coccinelle warnings: drivers/misc/cxl/debugfs.c:46:0-23: WARNING: fops_io_x64 should be defined with DEFINE_DEBUGFS_ATTRIBUTE drivers/misc/cxl/guest.c:890:5-26: WARNING: Comparison to bool drivers/misc/cxl/irq.c:107:3-23: WARNING: Assignment of bool to 0/1 drivers/misc/cxl/native.c:57:2-3: Unneeded semicolon drivers/misc/cxl/native.c:170:2-3: Unneeded semicolon Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Christophe Leroy 提交于
Partially copied from commit df0698be ("ARM: stack protector: change the canary value per task") A new random value for the canary is stored in the task struct whenever a new task is forked. This is meant to allow for different canary values per task. On powerpc, GCC expects the canary value to be found in a global variable called __stack_chk_guard. So this variable has to be updated with the value stored in the task struct whenever a task switch occurs. Because the variable GCC expects is global, this cannot work on SMP unfortunately. So, on SMP, the same initial canary value is kept throughout, making this feature a bit less effective although it is still useful. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Christophe Leroy 提交于
Partialy copied from commit c743f380 ("ARM: initial stack protector (-fstack-protector) support") This is the very basic stuff without the changing canary upon task switch yet. Just the Kconfig option and a constant canary value initialized at boot time. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Pan Xinhui 提交于
Implement xchg{u8,u16}{local,relaxed}, and cmpxchg{u8,u16}{,local,acquire,relaxed}. It works on all ppc. remove volatile of first parameter in __cmpxchg_local and __cmpxchg Suggested-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NPan Xinhui <xinhui.pan@linux.vnet.ibm.com> Acked-by: NBoqun Feng <boqun.feng@gmail.com> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Lars-Peter Clausen 提交于
There are no ibmebus driver that make use of legacy suspend/resume. This patch removes the support for it from ibmebus framework, new ibmebus driver (as unlikely as they are) wanting to use suspend/resume should use dev_pm_ops. Since there aren't any special bus specific things to do during suspend/resume and since the PM core will automatically fallback directly to using the device's PM ops if no bus PM ops are specified there is no need to have any special ibmebus PM ops at all. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Naveen N. Rao 提交于
Invoke the kprobe handlers directly rather than through notify_die(), to reduce path taken for handling kprobes. Similar to commit 6f6343f5 ("kprobes/x86: Call exception handlers directly from do_int3/do_debug"). While at it, rename post_kprobe_handler() to kprobe_post_handler() for more uniform naming. Reported-by: NMasami Hiramatsu <mhiramat@kernel.org> Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Naveen N. Rao 提交于
Commit 03465f89 ("powerpc: Use kprobe blacklist for exception handlers") removed __kprobes annotation from some of the prototypes, but left the kprobes header include directive unchanged. Remove it as it is no longer needed. Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 22 11月, 2016 4 次提交
-
-
由 Aneesh Kumar K.V 提交于
VSID 0 is bad address. Don't create slb entries on coproc fault for bad address Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: NBalbir Singh <bsingharora@gmail.com> Reviewed-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Russell Currey 提交于
eeh_pe_reset and eeh_reset_pe are two different functions in the same file which do mostly the same thing. Not only is this confusing, but potentially causes disrepancies in functionality, notably eeh_reset_pe as it does not check return values for failure. Refactor this into the following: - eeh_pe_reset(): stays as is, performs a single operation, exported - eeh_pe_reset_full(): new, full reset process that calls eeh_pe_reset() - eeh_reset_pe(): removed and replaced by eeh_pe_reset_full() - eeh_reset_pe_once(): removed Signed-off-by: NRussell Currey <ruscur@russell.cc> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Russell Currey 提交于
PHB, PE (and by association MVE) numbers are printed as a mix of decimal and hexadecimal throughout the kernel. This can be misleading, so make them all hexadecimal. Standardising on hex instead of dec because: - PHB numbers are presented in hex in sysfs/debugfs (and lspci, etc) - PE numbers are presented as hex in sysfs and parsed in hex in debugfs The only place I think this could cause confusing are the messages during boot, i.e. pci 000a:01 : [PE# 000] Secondary bus 1 associated with PE#0 which can be a quick way to check PE numbers. pe_level_printk() will only print two characters instead of three, so the above would be pci 000a:01 : [PE# 00] Secondary bus 1 associated with PE#0 which gives a hint it's in hex. Signed-off-by: NRussell Currey <ruscur@russell.cc> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Russell Currey 提交于
Whenever a PE is initialised in powernv, opal_pci_eeh_freeze_clear() is called. This is to remove any existing freeze, and has no negative side effects if the PE is already in an unfrozen state. On PHB backends that don't support this operation and return OPAL_UNSUPPORTED, this creates a scary and misleading warning message. Skip the warning message on init if OPAL_UNSUPPORTED is returned. As far as I'm aware, this currently only affects NPUs. Fixes: 313483dd ("powerpc/powernv: Unfreeze PE on allocation") Signed-off-by: NRussell Currey <ruscur@russell.cc> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 18 11月, 2016 18 次提交
-
-
由 Michael Ellerman 提交于
The ibm_pa_features array consists of structures that describe which bit and byte in the ibm,pa-features property toggles one or more flags in either the CPU, MMU, or user visible feature flags. Each one consists of 7 values, which are all unsigned long, int or char, meaning the compiler gives us no warning if we assign the wrong values to the wrong elements. In fact we have had a bug here in the past, where we were setting incorrect bits, see commit 6997e57d ("powerpc: scan_features() updates incorrect bits for REAL_LE"). So switch to using named initialisers for the structure elements, to reduce the likelihood of future bugs, and hopefully improve readability also. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NBalbir Singh <bsingharora@gmail.com>
-
由 Michael Ellerman 提交于
These are the PPC optimised versions of various crypto algorithms, so we should turn them on by default to get test coverage. Suggested-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
The IBMEBUS code supports the GX bus found on Power7 and earlier CPUs. On Power8 it has been replaced, and so we have no need for it. We don't actually have a config symbol for Power8 vs Power7 etc., but we only support booting little endian on Power8 or later, so use that as a reasonable approximation. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
ibmebus.c is pseries only code, so move it in there. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
vio.c is pseries only code, so move it in there. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Frederic Barrat 提交于
If a process dumps core while owning a cxl file descriptor obtained from an AFU driver (e.g. cxlflash) through the cxl_get_fd() API, the following error occurs: [ 868.027591] Unable to handle kernel paging request for data at address ... [ 868.027778] Faulting instruction address: 0xc00000000035edb0 cpu 0x8c: Vector: 300 (Data Access) at [c000003c688275e0] pc: c00000000035edb0: elf_core_dump+0xd60/0x1300 lr: c00000000035ed80: elf_core_dump+0xd30/0x1300 sp: c000003c68827860 msr: 9000000100009033 dar: c dsisr: 40000000 current = 0xc000003c68780000 paca = 0xc000000001b73200 softe: 0 irq_happened: 0x01 pid = 46725, comm = hxesurelock enter ? for help [c000003c68827a60] c00000000036948c do_coredump+0xcec/0x11e0 [c000003c68827c20] c0000000000ce9e0 get_signal+0x540/0x7b0 [c000003c68827d10] c000000000017354 do_signal+0x54/0x2b0 [c000003c68827e00] c00000000001777c do_notify_resume+0xbc/0xd0 [c000003c68827e30] c000000000009838 ret_from_except_lite+0x64/0x68 --- Exception: 300 (Data Access) at 00003fff98ad2918 The root cause is that the address_space structure for the file doesn't define a 'host' member. When cxl allocates a file descriptor, it's using the anonymous inode to back the file, but allocates a private address_space for each context. The private address_space allows to track memory allocation for each context. cxl doesn't define the 'host' member of the address space, i.e. the inode. We don't want to define it as the anonymous inode, since there's no longer a 1-to-1 relation between address_space and inode. To fix it, instead of using the anonymous inode, we introduce a simple pseudo filesystem so that cxl can allocate its own inodes. So we now have one inode for each file and address_space. The pseudo filesystem is only mounted on the first allocation of a file descriptor by cxl_get_fd(). Tested with cxlflash. Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Vaibhav Jain 提交于
If an afu interrupt is in flight when an eeh error is triggered the control still reaches the function native_irq_multiplexed and the PE-Handle read from the CXL_PSL_PEHandle_An register is 0xffff. The function then erroneously assumes that the interrupt belonged to a detached context and generates a warning with full stack dump in the kernel log complaining: "Unable to demultiplex CXL PSL IRQ for PE 65535 DSISR ffffffff DAR ffffffff. (Possible AFU HW issue - was a term/remove acked with outstanding transactions" To fix this the patch adds new code to the function native_irq_multiplexed function to compares the read value of register CXL_PSL_PEHandle_An to ~0ULL. If true then logs a warning message saying that the interrupt is being ignored and returns IRQ_HANDLED from the irq handler. Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NVaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Christophe Jaillet 提交于
'cxl_dev_context_init()' returns an error pointer in case of error, not NULL. So test it with IS_ERR. Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Christophe Jaillet 提交于
'cxl_dev_context_init()' returns an error pointer in case of error, not NULL. So test it with IS_ERR. Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Christophe Jaillet 提交于
'cxl_context_alloc()' does not return an error pointer. It is just a shortcut for a call to 'kzalloc' with 'sizeof(struct cxl_context)' as the size parameter. So its return value should be compared with NULL. While fixing it, simplify a bit the code. Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Nicholas Piggin 提交于
When ending an oops, don't clear die_owner unless the nest count went to zero. This prevents a second nested oops from hanging forever on the die_lock. Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Nicholas Piggin 提交于
When exiting xmon with 'x' (exit and recover), oops_begin bails out immediately, but die then calls __die() and oops_end(), which cause a lot of bad things to happen. If the debugger was attached then went to graceful recovery, exit from die() immediately. Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Nicholas Piggin 提交于
Add an option to use thin archives to build the kernel. Thin archives are explained in commit a5967db9 ("kbuild: allow architectures to use thin archives instead of ld -r"). This is a gradual way to introduce the option to testers. Some change to the way we invoke ar is required so it can be used by scripts/link-vmlinux.sh. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NNicholas Piggin <npiggin@gmail.com> [mpe: Make it an explicit option not dependant on COMPILE_TEST] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
Under some configs we need to explicitly include cpu_has_feature.h, otherwise we fail with: arch/powerpc/lib/sstep.c:1992:7: error: implicit declaration of function 'cpu_has_feature' Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Nathan Fontenot 提交于
The pasrsing of data written to the dlpar file in sysfs does not correctly account for the possibility of reading past the end of the buffer. The code assumes that all pieces of the command witten to the sysfs file are present in the form "<resource> <action> <id_type> <id>". Correct this by updating the buffer parsing code to make a local copy and use the strsep() and sysfs_streq() routines to parse the buffer. This patch also separates the parsing code into subroutines for each piece of the command. Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Tobias Klauser 提交于
Remove the unused but set variable srr1 in save_mce_event() to fix the following GCC warning when building with 'W=1': arch/powerpc/kernel/mce.c:75:11: warning: variable 'srr1' set but not used It has never been used. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Tobias Klauser 提交于
Fix two [-Wold-style-declaration] GCC warnings by moving the inline keyword before the return type. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Christophe Leroy 提交于
MIN_HUGEPTE_SHIFT hasn't been used since commit d1837cba ("powerpc/mm: Cleanup initialization of hugepages on powerpc") Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 17 11月, 2016 11 次提交
-
-
由 Suraj Jitindar Singh 提交于
Version 3.00 of the ISA states that the PATS (partition table size) field of the PTCR (partition table control register) and the PRTS (process table size) field of the partition table entry must both be less than or equal to 24. However the actual size of the partition and process tables is equal to 2 to the power of 12 plus the PATS and PRTS fields, respectively. This means that the max allowable size of each of these tables is 2^36 or 64GB for both. Thus when checking the size shift for each we should be checking for values of greater than 36 instead of the current check for shifts larger than 24 and 23. Fixes: 2bfd65e4Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: NBalbir Singh <bsingharora@gmail.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds ptrace interface test for TM SPR registers. This also adds ptrace interface based helper functions related to TM SPR registers access. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NSimon Guo <wei.guo.simon@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds ptrace interface test for VSX, VMX registers inside suspended TM context. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NSimon Guo <wei.guo.simon@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds ptrace interface test for VSX, VMX registers inside TM context. This also adds ptrace interface based helper functions related to chckpointed VSX, VMX registers access. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NSimon Guo <wei.guo.simon@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds ptrace interface test for VSX, VMX registers. This also adds ptrace interface based helper functions related to VSX, VMX registers access. This also adds some assembly helper functions related to VSX and VMX registers. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NSimon Guo <wei.guo.simon@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds ptrace interface test for TAR, PPR, DSCR registers inside suspended TM context. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NSimon Guo <wei.guo.simon@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds ptrace interface test for TAR, PPR, DSCR registers inside TM context. This also adds ptrace interface based helper functions related to checkpointed TAR, PPR, DSCR register access. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NSimon Guo <wei.guo.simon@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds ptrace interface test for TAR, PPR, DSCR registers. This also adds ptrace interface based helper functions related to TAR, PPR, DSCR register access. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NSimon Guo <wei.guo.simon@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds ptrace interface test for GPR/FPR registers inside suspended TM context. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NSimon Guo <wei.guo.simon@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds ptrace interface test for GPR/FPR registers inside TM context. This adds ptrace interface based helper functions related to checkpointed GPR/FPR access. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NSimon Guo <wei.guo.simon@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds ptrace interface test for GPR/FPR registers. This adds ptrace interface based helper functions related to GPR/FPR access and some assembly helper functions related to GPR/FPR registers. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NSimon Guo <wei.guo.simon@gmail.com> [mpe: Add #defines for the new note types when headers don't define them] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-