When userspace is passing around swapbuffers using DRI, we frequently
have to open and close the same object in the foreign address space.
This shows itself as the same object being rebound at roughly 30fps
(with a second object also being rebound at 30fps), which involves us
having to rewrite the page tables and maintain the drm_mm range manager
every time.

However, since the object still exists and it is only the local handle
that disappears, if we are lazy and do not unbind the VMA immediately
when the local user closes the object but defer it until the GPU is
idle, then we can reuse the same VMA binding. We still have to be
careful to mark the handle and lookup tables as closed to maintain the
uABI, just allowing the underlying VMA to be resurrected if the user is
able to access the same object from the same context again.

If the object itself is destroyed (neither userspace keeping a handle to
it), the VMA will be reaped immediately as usual.

In the future, this will be even more useful as instantiating a new VMA
for use on the GPU will become heavier. A nuisance indeed, so nip it in
the bud.

v2: s/__i915_vma_final_close/i915_vma_destroy/ etc.
v3: Leave a hint as to why we deferred the unbind on close.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195115.22309-1-chris@chris-wilson.co.uk

Trivial fix to spelling mistake in pr_err error message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503154510.708-1-colin.king@canonical.com

In Icelake, there are more engines on which Memory Object Control
States need to be configured. Besides adding Icelake under Skylake
config, the patch makes sure MOCS register addresses for the new
engines are properly defined.

Additional patch might be need later, in case the specification will
propose different MOCS config values for Icelake than in previous
gens.

v2: Restricted comments to gen11, updated description, renamed
defines.

v3: Used proper engine indexes for gen11.

v4: Ensure patch is Icelake only.

v5: Style fixes (proposed by mwajdeczko)

v6 (from Paulo): fix checkpatch's COMMIT_LOG_LONG_LINE (Checkpatch).

BSpec: 19405
BSpec: 21140
Cc: Oscar Mateo Lozano <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NTomasz Lis <tomasz.lis@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502223142.3891-1-paulo.r.zanoni@intel.com

During state readout we first read out the pipe src size, store
that information in the user mode h/vdisplay, but later on we overwrite
that with the actual crtc timings. That makes our read out crtc state
inconsistent with itself when the BIOS has enabled the panel fitter to
scale the pipe contents. Let's preserve the pipe src size based
information in the user mode to make things consistent again.

This fixes a problem introduced by commit a2936e3d ("drm/i915:
Use drm_mode_get_hv_timing() to populate plane clip rectangle")
where the inconsistent state is now leading the plane clipping code
to report a failure on account the plane dst coordinates not matching
the user mode size. Previously we did the plane clipping based on
the pipe src size instead and thus never noticed the inconsistency.

The failure manifests as a WARN:
[    0.762117] [drm:intel_dump_pipe_config [i915]] requested mode:
[    0.762142] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72143 1366 1414 1446 1526 768 771 777 784 0x40 0xa
...
[    0.762327] [drm:intel_dump_pipe_config [i915]] port clock: 72143, pipe src size: 1024x768, pixel rate 72143
...
[    0.764666] [drm:drm_atomic_helper_check_plane_state [drm_kms_helper]] Plane must cover entire CRTC
[    0.764690] [drm:drm_rect_debug_print [drm]] dst: 1024x768+0+0
[    0.764711] [drm:drm_rect_debug_print [drm]] clip: 1366x768+0+0
[    0.764713] ------------[ cut here ]------------
[    0.764714] Could not determine valid watermarks for inherited state
[    0.764792] WARNING: CPU: 4 PID: 159 at drivers/gpu/drm/i915/intel_display.c:14584 intel_modeset_init+0x3ce/0x19d0 [i915]
...

Cc: FadeMind <fademind@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: NFadeMind <fademind@gmail.com>
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Tested-by: NDave Jones <davej@codemonkey.org.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2018-April/163186.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105992
Fixes: a2936e3d ("drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426163015.14232-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NLarry Finger <Larry.Finger@lwfinger.net>
Tested-by: NFadeMind <fademind@gmail.com>

No functional changes, just a minor knit. Stumbled across the kernel doc for
schedule_timeout() which quotes "In all cases the return value is guaranteed
to be non-negative". Also, the return code of schedule_timeout() already checks
for negative values "return timeout < 0 ? 0 : timeout;" and returns 0
in such cases. Furthermore, the msec_to_jiffies returns an ungined long
value. So, let's do away with the redundant check for an atomic
pipe update.

v2: Commit message changes (Manasi).
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NTarun Vyas <tarun.vyas@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502233300.81220-1-tarun.vyas@intel.com

On intel_dp_compute_config() we were calculating the needed vco
for eDP on gen9 and we stashing it in
intel_atomic_state.cdclk.logical.vco

However few moments later on intel_modeset_checks() we fully
replace entire intel_atomic_state.cdclk.logical with
dev_priv->cdclk.logical fully overwriting the logical desired
vco for eDP on gen9.

So, with wrong VCO value we end up with wrong desired cdclk, but
also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTL to verify if we configured properly the desired
frequency the CD Frequency Select bits [27:26] == 10b can mean
337.5 or 308.57 MHz depending on the VCO. So if we have wrong
VCO value stashed we will believe the frequency selection didn't
stick and start to raise WARNs of cdclk mismatch.

[   42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[   42.897269] cdclk state doesn't match!
[   42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[   42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915]
[   43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[   43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[   43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

v2: Move the entire eDP's vco logical adjustment to inside
    the skl_modeset_calc_cdclk as suggested by Ville.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Fixes: bb0f4aab ("drm/i915: Track full cdclk state for the logical and actual cdclk frequencies")
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20180502175255.5344-1-rodrigo.vivi@intel.com

As we unpark the engines and are about to begin a new cycle of activity,
mark the current status of the hangceck as idle so that we avoid
carrying over a stale timestamp/action into the next cycle.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502220313.6459-2-chris@chris-wilson.co.uk

In the unusual circumstance where we reuse a seqno (for example, in
igt), make sure that we reset the hangcheck timestamp before it sees the
same seqno again.

References: https://bugs.freedesktop.org/show_bug.cgi?id=106215Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502220313.6459-1-chris@chris-wilson.co.uk

If we try to suspend a wedged device following a GPU reset failure, we
will also fail to turn off the rc6 powerwells (on vlv), leading to a
*ERROR*. This is quite expected in this case, so the best we can do is
shake our heads and reduce the *ERROR* to a debug so CI stops
complaining.

Testcase: igt/gem_eio/in-flight-suspend #vlv
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105583Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409094905.4516-1-chris@chris-wilson.co.uk

Move the tracepoint into the common execlists_context_schedule_out() and
call it from preemption completion as well. A small bit of refactoring
code should help with when tracing, or else we end up with requests
mysteriously disappearing and some being emitted to HW multiple times.
Reported-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502230202.6848-1-chris@chris-wilson.co.uk

We need to move to a more flexible timeline that doesn't assume one
fence context per engine, and so allow for a single timeline to be used
across a combination of engines. This means that preallocating a fence
context per engine is now a hindrance, and so we want to introduce the
singular timeline. From the code perspective, this has the notable
advantage of clearing up a lot of mirky semantics and some clumsy
pointer chasing.

By splitting the timeline up into a single entity rather than an array
of per-engine timelines, we can realise the goal of the previous patch
of tracking the timeline alongside the ring.

v2: Tweak wait_for_idle to stop the compiling thinking that ret may be
uninitialised.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502163839.3248-2-chris@chris-wilson.co.uk

In the future, we want to move a request between engines. To achieve
this, we first realise that we have two timelines in effect here. The
first runs through the GTT is required for ordering vma access, which is
tracked currently by engine. The second is implied by sequential
execution of commands inside the ringbuffer. This timeline is one that
maps to userspace's expectations when submitting requests (i.e. given the
same context, batch A is executed before batch B). As the rings's
timelines map to userspace and the GTT timeline an implementation
detail, move the timeline from the GTT into the ring itself (per-context
in logical-ring-contexts/execlists, or a global per-engine timeline for
the shared ringbuffers in legacy submission.

The two timelines are still assumed to be equivalent at the moment (no
migrating requests between engines yet) and so we can simply move from
one to the other without adding extra ordering.

v2: Reinforce that one isn't allowed to mix the engine execution
timeline with the client timeline from userspace (on the ring).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502163839.3248-1-chris@chris-wilson.co.uk

Replace 01.org URL with upstream linux-firmware repo URL.
We no longer release firmware to 01.org.
linux-firmware.git is the ultimate place to find
the i915 firmwares.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525129168-529-1-git-send-email-anusha.srivatsa@intel.com

As our early doorbell is split between early allocation and a late setup
after we have a channel to the GuC, it may happen due to a lapse of
programmer judgement that we try to setup an invalid doorbell. Make use
of our has_doorbell() function to check the doorbell does exist for the
client before we try and tell the guc about it. In doing so, we prevent
the compiler from warning about the otherwise unused function in some
configurations.
Reported-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180501075203.12458-1-chris@chris-wilson.co.uk

Commit 39bf4de8 ("drm/i915: Add -Wall -Wextra to our build, set
warnings to full") enabled extra warnings for i915 to spot possible
bugs in new code, and then disabled a subset of these warnings to keep
the current code building without warnings (with gcc). Enabling the
extra warnings also enabled some additional clang-only warnings, as a
result building i915 with clang currently is extremely noisy. For now
also disable the clang warnings sign-compare, sometimes-uninitialized,
unneeded-internal-declaration and initializer-overrides. If desired
they can be re-enabled after the code has been fixed.
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180501182440.70121-1-mka@chromium.org

Since the advent of execlists, the HW no longer executes from a single
statically assigned ring, but instead switches to a different ring for
each context (logical ringbuffer contexts as it is called). So a good way
to tally the executing context against what we have queued is by
comparing the RING_START register against our requests. Make it so.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502104150.29874-1-chris@chris-wilson.co.uk

The old wait_on_atomic_t used a custom callback to perform the
schedule(), which used my return semantics of reporting an error code on
timeout. wait_var_event_timeout() uses the schedule() return semantics
of reporting the remaining jiffies (1 if it timed out with 0 jiffies
remaining!) and 0 on failure. This semantic mismatch lead to us falsely
claiming a time out occurred.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106085
Fixes: d224985a ("sched/wait, drivers/drm: Convert wait_on_atomic_t() usage to the new wait_var_event() API")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417170638.20550-1-chris@chris-wilson.co.uk

Use i915.dmc_firmware_path to override default firmware for the platform
and bypassing version checks.

v2: add missing param struct member declaration (David)
Tested-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424122016.2416-1-jani.nikula@intel.com

Using plain jiffies in error state output makes the output
time differences relative to the current system time. This
is wrong as it makes output time differences dependent
of when the error state is printed rather than when it is
captured.

Store capture jiffies into error state and use it
when outputting the state to fix time differences output.

v2: use engine timestamp as epoch, output formatting (Chris)
v3: pass epoch to print_engine/request (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430075259.4476-1-mika.kuoppala@linux.intel.com

Due to the latency of the tasklet running from ksoftirqd, by the time we
process the execlist dequeue may be a long time behind the GPU. If the
request was completed when we ran reschedule, we will not have tweaked
its priority, but if it is still listed as being in-flight for dequeue
we will use it as a reference for the rest of the queue, including
requests from its own context which will now be at higher priority. This
can cause us to issue a preempt-to-idle request, even though the request
we want to preempt is already complete.
Reported-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180501122131.19435-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

On clock recovery this function is called to find out
the max voltage swing level that we could go.

However gen 9 functions use the old buffer translation tables
to figure that out. ICL uses different set of tables for eDP
and DP for both Combo and MG PHY ports. This patch adds the hook
for ICL for getting this information from appropriate buf trans tables.

v5 (from Paulo):
* New rebase after changes to earlier patches.
v4:
* Rebase.
v3:
* Follow the coding conventions here
(https://cgit.freedesktop.org/drm-intel/tree/Documentation/process/codin
g-style.rst#n191) (Paulo)
v2:
* Rebase after patch that adds voltage check inside buf trans
function (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-9-paulo.r.zanoni@intel.com

This is an important part of the DDI initalization as well as
for changing the voltage during DisplayPort link training.

The Voltage swing seqeuence is similar to Cannonlake.
However it has different register definitions and hence
it makes sense to create a separate vswing sequence and
program functions for ICL to leave room for more changes
in case the Bspec changes later and deviates from CNL sequence.

v2:
Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula)

v3:
* Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo)

v4:
* Call it combo_vswing, use switch statement (Paulo)

v5 (from Paulo):
* Fix a typo.
* s/rate < 600000/rate <= 600000/.
* Don't remove blank lines that should be there.

v6:
* Rebased by Rodrigo on top of Cannonlake changes
  where non vswing sequences are not aligned with iboost
  anymore.

v7: Another rebase after an upstream rework.

v8 (from Paulo):
* Adjust the code to the upstream output type changes.
* Squash the patch that moved some functions up.
* Merge both get_combo_buf_trans functions in order to simplify the
  code.
* Change the changelog format.

v9 (from Paulo):
* Use RTERM_SELECT instead of SCALING_MODE_SEL.
* Adjust the output type handling according to how the other platforms
  do it now.

v10 (from Paulo):
* Fix comment left out from v9 changes (Rodrigo).

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com

We don't need to track every ring for its lifetime as they are managed
by the contexts/engines. What we do want to track are the live rings so
that we can sporadically clean up requests if userspace falls behind. We
can simply restrict the gt->rings list to being only gt->live_rings.

v2: s/live/active/ for consistency with gt.active_requests
Suggested-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-4-chris@chris-wilson.co.uk

In the next patch, rings are the central timeline as requests may jump
between engines. Therefore in the future as we retire in order along the
engine timeline, we may retire out-of-order within a ring (as the ring now
occurs along multiple engines), leading to much hilarity in miscomputing
the position of ring->head.

As an added bonus, retiring along the ring reduces the penalty of having
one execlists client do cleanup for another (old legacy submission
shares a ring between all clients). The downside is that slow and
irregular (off the critical path) process of cleaning up stale requests
after userspace becomes a modicum less efficient.

In the long run, it will become apparent that the ordered
ring->request_list matches the ring->timeline, a fun challenge for the
future will be unifying the two lists to avoid duplication!

v2: We need both engine-order and ring-order processing to maintain our
knowledge of where individual rings have completed upto as well as
knowing what was last executing on any engine. And finally by decoupling
retiring the contexts on the engine and the timelines along the rings,
we do have to keep a reference to the context on each request
(previously it was guaranteed by the context being pinned).

v3: Not just a reference to the context, but we need to keep it pinned
as we manipulate the rings; i.e. we need a pin for both the manipulation
of the engine state during its retirements, and a separate pin for the
manipulation of the ring state.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-3-chris@chris-wilson.co.uk

Make life easier in upcoming patches by moving the context_pin and
context_unpin vfuncs into inline helpers.

v2: Fixup mock_engine to mark the context as pinned on use.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-2-chris@chris-wilson.co.uk

In commit 9b6586ae ("drm/i915: Keep a global seqno per-engine"), we
moved from a global inflight counter to per-engine counters in the
hope that will be easy to run concurrently in future. However, with the
advent of the desire to move requests between engines, we do need a
global counter to preserve the semantics that no engine wraps in the
middle of a submit. (Although this semantic is now only required for gen7
semaphore support, which only supports greater-then comparisons!)

v2: Keep a global counter of all requests ever submitted and force the
reset when it wraps.

References: 9b6586ae ("drm/i915: Keep a global seqno per-engine")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-1-chris@chris-wilson.co.uk

Previously, we just reset the ring register in the context image such
that we could skip over the broken batch and emit the closing
breadcrumb. However, on resume the context image and GPU state would be
reloaded, which may have been left in an inconsistent state by the
reset. The presumption was that at worst it would just cause another
reset and skip again until it recovered, however it seems just as likely
to cause an unrecoverable hang. Instead of risking loading an incomplete
context image, restore it back to the default state.

v2: Fix up off-by-one from including the ppHSWP in with the register
state.
v3: Use a ring local to compact a few lines.
v4: Beware setting the ring local before checking for a NULL request.

References: https://bugs.freedesktop.org/show_bug.cgi?id=105304Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180428111532.15819-1-chris@chris-wilson.co.uk

There's a lot of code for the PLL enabling, so let's first only
introduce the register definitions in order to make patch reviewing a
little easier.

v2: Coding style (Jani).
v3: Preparation for upstreaming.
v4: Fix MG_CLKTOP2_CORECLKCTL1 address and random typos (James).

Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-3-paulo.r.zanoni@intel.com

Gen11/ICL onward ddb entry start/end mask is increased from 10 bits to
11 bits. This patch make changes to use proper mask for ICL+ during
hardware ddb value readout.

Changes since V1:
 - Use _MASK & _SHIFT macro (James)
Changes since V2:
 - use kernel type u8 instead of uint8_t
Changes since V3:
 - Rebase
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426142517.16643-4-mahesh1.kumar@intel.com

ICL has two slices of DBuf, each slice of size 1024 blocks.
We should not always enable slice-2. It should be enabled only if
display total required BW is > 12GBps OR more than 1 pipes are enabled.

Changes since V1:
 - typecast total_data_rate to u64 before multiplication to solve any
   possible overflow (Rodrigo)
 - fix where skl_wm_get_hw_state was memsetting ddb, resulting
   enabled_slices to become zero
 - Fix the logic of calculating ddb_size
Changes since V2:
 - If no-crtc is part of commit required_slices will have value "0",
   don't try to disable DBuf slice.
Changes since V3:
 - Create a generic helper to enable/disable slice
 - don't return early if total_data_rate is 0, it may be cursor only
   commit, or atomic modeset without any plane.
Changes since V4:
 - Solve checkpatch warnings
 - use kernel types u8/u64 instead of uint8_t/uint64_t
Changes since V5:
 - Rebase
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426142517.16643-3-mahesh1.kumar@intel.com

This patch adds support to start tracking status of DBUF slices.
This is foundation to introduce support for enabling/disabling second
DBUF slice dynamically for ICL.

Changes Since V1:
 - use kernel type u8 over uint8_t
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426142517.16643-2-mahesh1.kumar@intel.com

These fields have been deprecated and moved in ICL+. Stop setting the
bits.

They have moved to GAMMA_MODE and CSC_MODE, respectively. This patch
is just to stop incorrectly setting bits in PLANE_COLOR_CTL while
we're waiting for the new replacement functionality to be done.

v2: Drop useless comment, and change !(GEN >= 11) to (GEN < 11). (Ville)

v3: No changes

v4 (from Paulo): Rebase.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-2-paulo.r.zanoni@intel.com

As the Geminilake firmware is now merged to linux-firmware.git
use MODUE_FIRMWARE to load the firmware.

This removes the error message in the dmesg log:

    i915 0000:00:02.0: Direct firmware load for
        i915/glk_dmc_ver1_04.bin failed with error -2
    i915 0000:00:02.0: Failed to load DMC firmware
        i915/glk_dmc_ver1_04.bin. Disabling runtime power management.
    i915 0000:00:02.0: DMC firmware homepage:
        https://01.org/linuxgraphics/downloads/firmware

and now shows that the firmware has correctly loaded:

    [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
Signed-off-by: NIan W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411044213.383-1-ianwmorrison@gmail.com

This was my bad, spec says that the name of this bit is
'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4
So not setting it.

BSpec: 7713

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425212334.21109-4-jose.souza@intel.com

IGT tests could be improved with sink status, knowing for sure that
hardware have activate or exit PSR.

v3:
Reading i915_edp_psr_status was causing PSR to exit but now with
'drm/i915/psr: Prevent PSR exit when a non-pipe related register is
written' it is fixed.
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425212334.21109-3-jose.souza@intel.com

This will be helpful to debug what hardware is actually tracking
and causing PSR to exit.

BSpec: 7721

v4:
- Using _MMIO_TRANS2() in PSR_EVENT
- Cleaning events before printing
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425212334.21109-2-jose.souza@intel.com

Any write in any display register was causing HW to exit PSR,
masking it to allow more power savings. Writes to pipe related
registers will still cause HW to exit PSR.
This is already masked for PSR2.

It also do not break the Display WA #0884, writes to CURSURFLIVE
are still causing hardware to exit PSR. This was tested in CNL machine
by triggering a write to CURSURFLIVE when a debugfs was read by user.

Bspec: 7721 and 8042

v4: Checked that it do not breaks WA #0884 and added this information
to the commit message.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425212334.21109-1-jose.souza@intel.com

Even though we weren't injecting guilty requests to be reset, we could
still fall over the issue of resetting the same request too fast -- where
the GPU refuses to start again. (Although it is interesting to note that
reloading the driver is sufficient, suggesting that we could recover if
we delayed the setup after reset?) Continue to paper over the problem by
adding a small delay by waiting for the engine to idle between tests,
and ensure that the engines are idle before starting the idle tests.

v2: Replace single instance of 50 with a magic macro.

References: 02866679 ("drm/i915/selftests: Avoid repeatedly harming the same innocent context")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411120346.27618-1-chris@chris-wilson.co.uk

Abstract compliance test adjustments to a single function. Also make the
bpc adjustments affect the limits, actually forcing the bpc. Seems like
directly changing the pipe_bpp in the past could not have been
effective.
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ef61e76003ab7719c82810b742f3fb5765c0e14c.1524730974.git.jani.nikula@intel.com

For now, there's just the one link config selection, optimizing for slow
and wide link. No functional changes.

Keep the debug logging in the caller, to avoid duplication later on if
alternative link confing selection gets added.

v2: Improved commit message
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64848b76bf90d6ceecd7ec6b5add28531e0b1a41.1524730974.git.jani.nikula@intel.com