1. This patch adds handling of hw ras errors using new set of
   common commands.
2. Updated the error message tables to match the register's name and
   error status returned by the commands.
Signed-off-by: NShiju Jose <shiju.jose@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. This patch adds minor loop optimization in the
   hclge_hw_error_set_state function.
2. Adds logging module's name if it fails to configure the
   error interrupts.
Signed-off-by: NShiju Jose <shiju.jose@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch renames process_hw_error function to
handle_hw_ras_error function to match the purpose
of the function. This is because hw errors reported through
ras and msix interrupts will be handled separately.
Signed-off-by: NShiju Jose <shiju.jose@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch deletes unnecessary setting of the descriptor data
to 0 for disabling error interrupts because
it is already done by the hclge_cmd_setup_basic_desc function.
Signed-off-by: NShiju Jose <shiju.jose@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds calling hclge_hw_error_set_state function
to re-enable the error interrupts those will be disabled on
the hw reset.
Signed-off-by: NShiju Jose <shiju.jose@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch
- renames the enable error interrupt functions.
  The reason is that these functions
  are used for both enable and disable error interrupts.

- removes redundant logs from the enable error interrupt functions.
Signed-off-by: NShiju Jose <shiju.jose@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1.The command interface for queryng and clearing hw errors is
  changed, which requires the new process error functions to be added.
  This patch removes all the current process error functions and
  associated definitions. The new functions to handle ras errors
  would be added in this patch set.

2. Fixed order issue of the hw_blk table.
Signed-off-by: NShiju Jose <shiju.jose@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Un/offload FDB on NVE detach/attach

Petr says:

When a VXLAN device is attached to a bridge of a driver capable of
offloading such, or upped, the FDB entries already present at the device
need to be offloaded. Similarly when an offloaded VXLAN device ceases
being interesting (it is downed, or detached, or a front-panel port
netdevice is detached from the bridge that the VXLAN device is attached
to), any offloaded FDB entries need to be unoffloaded and unmarked. This
attach / detach processing is implemented in this patchset.

In patch #1, a code pattern is extracted into a named function for
easier reuse.

In patch #2, vxlan_fdb_replay() is added to send
SWITCHDEV_VXLAN_FDB_ADD_TO_DEVICE for each FDB entry with a given VNI.
The intention is that the offloading driver will interpret these events
like any other and thus offload the FDB entries that existed prior to
VXLAN attach.

In patches #3 and #4, the functions vxlan_fdb_clear_offload() resp.
br_fdb_clear_offload() are added. These clear the offloaded flag at
matching FDB entries.

In patches #5-#9, we introduce FID-type-specific and NVE-type-specific
ops necessary to properly abstract invocations of the replay/clear
functions.

Finally patch #10 implements the FDB management.

In patch #11, the mlxsw-specific test case is extended to check that the
management of offload marks under the newly-supported situations is
correct. Patch #12, from Ido, exercises the new code paths in actual
functional test.

v2:
- Patch #1:
    - Modify vxlan_fdb_switchdev_notifier_info() to initialize the
      structure through a passed-in pointer argument, instead of returning
      it as a value.
- Patch #2:
    - Adapt to API change in vxlan_fdb_switchdev_notifier_info()
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using VLAN-aware bridges with VXLAN, the VLAN that is mapped to the
VNI of the VXLAN device is that which is configured as "pvid untagged"
on the corresponding bridge port.

When these flags are toggled or when the VLAN is deleted entirely,
remote hosts should not be able to receive packets from the VTEP.

Add a test case for above mentioned scenarios.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a VXLAN device is attached to an offloaded bridge, or when a
front-panel port is attached to a bridge that already has a VXLAN
device, mlxsw should offload the existing offloadable FDB entries.
Similarly when VXLAN device is downed, the FDB entries are unoffloaded,
and the marks thus need to be cleared. Similarly when a front-panel port
device is attached to a bridge with a VXLAN device, or when VLAN flags
are tweaked on a VXLAN port attached to a VLAN-aware bridge.

Test that the replaying / clearing logic works by observing transitions
in presence of offload marks under different scenarios.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Any existing NVE FDB entries need to be offloaded when NVE is enabled
for a given FID. Recent patches have added fdb_replay op for this, so
just invoke it from mlxsw_sp_nve_fid_enable().

When NVE is disabled on a FID, any existing FDB offloaded marks need to
be cleared on NVE device as well as on its bridge master. An op to
handle this, fdb_clear_offload, has been added to FID ops and NVE ops in
previous patches. Add code to resolve the NVE device, NVE type, and
dispatch to both fdb_clear_offload ops.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If there are any offloaded FDB entries at bridge master of an NVE device
at the time that it's un-offloaded, their offloaded marks need to be
cleared. How that is done depends on whether the bridge in question is
vlan aware. Therefore add a per-FID-type operation.

Implement the operation for the 802.1q and 802.1d bridges.

Add and publish a function mlxsw_sp_fid_fdb_clear_offload() to dispatch
to the new operation according to FID type.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If there are any offloaded FDB entries at an NVE device at the time that
it's un-offloaded, their offloaded marks need to be cleared. How that is
done depends on NVE device type, and therefore add a per-NVE-type
operation.

Implement the operation for the sole NVE device type currently supported
by mlxsw, VXLAN.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A replay of FDB needs to be performed so that the FDB entries existing
at the NVE device are offloaded. How the replay is done depends on NVE
device type, and therefore add a per-NVE-type operation.

Implement the operation for the sole NVE device type currently supported
by mlxsw, VXLAN.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The notifier block will need to be passed to vxlan_fdb_replay() in a
follow-up patch.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A follow-up patch will add support for replay and for clearing of
offload marks. These are NVE type-sensitive operations, and to be able
to dispatch them properly, a FID needs to know what NVE type is attached
to it.

Therefore, track the NVE type at struct mlxsw_sp_fid. Extend
mlxsw_sp_fid_vni_set() to take it as an argument, and add
mlxsw_sp_fid_nve_type().
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a driver unoffloads all FDB entries en bloc, it's inefficient to
send the switchdev notification one by one. Add a helper that unsets the
offload flag on FDB entries on a given bridge port and VLAN.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a driver unoffloads all FDB entries en bloc, it's inefficient to
send the switchdev notification one by one. Add a helper that walks the
FDB table, unsetting the offload flag on RDST with a given VNI.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a VXLAN device becomes relevant to a driver (such as when it is
attached to an offloaded bridge), the driver will generally need to walk
the existing FDB entries and offload them.

Add a function vxlan_fdb_replay() to call a given notifier block for
each FDB entry with a given VNI.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are currently two places that need to initialize the notifier info
structure, and one more is coming next when vxlan_fdb_replay() is
introduced. These three instances have / will have very similar code
that is easy to abstract away into a named function.

Add such function, vxlan_fdb_switchdev_notifier_info(), and call it from
vxlan_fdb_switchdev_call_notifiers() and vxlan_fdb_find_uc().
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Igor Russkikh says:

====================
net: aquantia: add RSS configuration

In this patchset few bugs related to RSS are fixed and RSS table and
hash key configuration is added.

We also do increase max number of HW rings upto 8.

v2: removed extra arg check
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support of configuration of RSS hash key and RSS indirection table.
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now RSS indirection table is initialized before setting up the number of
hw queues, consequently the table may be filled by non existing queues.
This patch moves the initialization when the number of hw queues is
known.
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Increase the upper limit of the hw queues up to 8.
This makes RSS better on multiheaded cpus.

This is a maximum AQC hardware supports in one traffic class.

The actual value is still limited by a number of available cpu cores.
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set RSS indirection table and RSS hash key sizes to their real size.
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Petr Machata says:

====================
Pass extack to NETDEV_PRE_UP

Drivers may need to validate configuration of a device that's about to
be upped. An example is mlxsw, which needs to check the configuration of
a VXLAN device attached to an offloaded bridge. Should the validation
fail, there's currently no way to communicate details of the failure to
the user, beyond an error number.

Therefore this patch set extends the NETDEV_PRE_UP event to include
extack, if available.

There are three vectors through which NETDEV_PRE_UP invocation can be
reached. The two major ones are dev_open() and dev_change_flags(), the
last is then __dev_change_flags().

In patch #1, the first access vector, dev_open() is addressed. An extack
parameter is added and all users converted to use it.

Before addressing the second vector, two preparatory patches propagate
extack argument to the proximity of the dev_change_flags() call in VRF
and IPVLAN drivers. That happens in patches #2 and #3. Then in patch #4,
dev_change_flags() is treated similarly to dev_open().

Likewise in patch #5, __dev_change_flags() is extended.

Then in patches #6 and #7, the extack is finally propagated all the way
to the point where the notification is emitted.

This change allows particularly mlxsw (which already has code to
leverage extack if available) to communicate to the user error messages
regarding VXLAN configuration. In patch #8, add a test case that
exercises this code and checks that an error message is propagated.

For example:

	local 192.0.2.17 remote 192.0.2.18 \
	dstport 4789 nolearning noudpcsum tos inherit ttl 100
	local 192.0.2.17 remote 192.0.2.18 \
	dstport 4789 nolearning noudpcsum tos inherit ttl 100
Error: mlxsw_spectrum: Conflicting NVE tunnels configuration.

v2:
- Add David Ahern's tags.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a testsuite dedicated to testing extack propagation and related
functionality.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Drivers may need to validate configuration of a device that's about to
be upped. Should the validation fail, there's currently no way to
communicate details of the failure to the user, beyond an error number.

To mend that, change __dev_open() to take an extack argument and pass it
from __dev_change_flags() and dev_open(), where it was propagated in the
previous patches.

Change __dev_open() to call call_netdevice_notifiers_extack() so that
the passed-in extack is attached to the NETDEV_PRE_UP notifier.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to propagate extack through NETDEV_PRE_UP, add a new function
call_netdevice_notifiers_extack() that primes the extack field of the
notifier info. Convert call_netdevice_notifiers() to a simple wrapper
around the new function that passes NULL for extack.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. The last missing API is __dev_change_flags().

Therefore extend __dev_change_flags() with and extra extack argument and
update the two existing users.

Since the function declaration line is changed anyway, name the struct
net_device argument to placate checkpatch.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_change_flags().

Therefore extend dev_change_flags() with and extra extack argument and
update all users. Most of the calls end up just encoding NULL, but
several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available.

Since the function declaration line is changed anyway, name the other
function arguments to placate checkpatch.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A follow-up patch will extend dev_change_flags() with an extack
argument. Extend ipvlan_set_port_mode() to have that argument available
for the conversion.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A follow-up patch will extend dev_change_flags() with an extack
argument. Extend cycle_netdev() to have that argument available for the
conversion.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_open().

Therefore extend dev_open() with and extra extack argument and update
all users. Most of the calls end up just encoding NULL, but bond and
team drivers have the extack readily available.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

2 goto labels are indented with a tab. remove the tabs and
keep the code style consistent.
Signed-off-by: NPedro Tammela <pctammela@gmail.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
Adjust MTU of DSA master interface

DSA makes use of additional headers to direct a frame in/out of a
specific port of the switch. When the slave interfaces uses an MTU of
1500, the master interface can be asked to handle frames with an MTU
of 1504, or 1508 bytes. Some Ethernet interfaces won't
transmit/receive frames which are bigger than their MTU.

Automate the increasing of the MTU on the master interface, by adding
to each tagging driver how much overhead they need, and then calling
dev_set_mtu() of the master interface to increase its MTU as needed.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DSA tagging of frames sent over the master interface to the switch
increases the size of the frame. Such frames can then be bigger than
the normal MTU of the master interface, and it may drop them. Use the
overhead information from the tagger to set the MTU of the master
device to include this overhead.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each DSA tag protocol needs to add additional headers to the Ethernet
frame in order to direct it towards a specific switch egress port. It
must also remove the head from a frame received from a
switch. Indicate the maximum size of these headers in the tag protocol
ops structure, so the core can take these overheads into account.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

caller has guaranted that rxhash is not zero
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tun flow entry 'updated' fields are written when receive
every packet. Thus if a flow is receiving packets from a
particular flow entry, it'll cause false-sharing with
all the other who has looked it up, so move it in its own
cache line

and update 'queue_index' and 'update' field only when
they are changed to reduce the cache false-sharing.
Signed-off-by: NZhang Yu <zhangyu31@baidu.com>
Signed-off-by: NWang Li <wangli39@baidu.com>
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>