We met a kernel panic when enabling earlycon, which is due to the fixmap
address of earlycon is not statically setup.

Currently the static fixmap setup in head_64.S only covers 2M virtual
address space, while it actually could be in 4M space with different
kernel configurations, e.g. when VSYSCALL emulation is disabled.

So increase the static space to 4M for now by defining FIXMAP_PMD_NUM to 2,
and add a build time check to ensure that the fixmap is covered by the
initial static page tables.

Fixes: 1ad83c85 ("x86_64,vsyscall: Make vsyscall emulation configurable")
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: Nkernel test robot <rong.a.chen@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com> (Xen parts)
Cc: H Peter Anvin <hpa@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180920025828.23699-1-feng.tang@intel.com

Variable save_pud is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
variable 'save_pud' set but not used [-Wunused-but-set-variable]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

In some cases 32-bit PAE PV guests still write PTEs directly instead of
using hypercalls. This is especially bad when clearing a PTE as this is
done via 32-bit writes which will produce intermediate L1TF attackable
PTEs.

Change the code to use hypercalls instead.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

If we don't use paravirt; don't play unnecessary and complicated games
to free page-tables.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NRik van Riel <riel@surriel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 7b25b9cb ("x86/xen/time: Initialize pv xen time in
init_hypervisor_platform()") moved the mapping of the shared info area
before pagetable_init(). This breaks booting as 32-bit PV guest as the
use of set_fixmap isn't possible at this time on 32-bit.

This can be worked around by populating the needed PMD on 32-bit
kernel earlier.

In order not to reimplement populate_extra_pte() using extend_brk()
for allocating new page tables extend alloc_low_pages() to do that in
case the early page table pool is not yet available.

Fixes: 7b25b9cb ("x86/xen/time: Initialize pv xen time in init_hypervisor_platform()")
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

In every hypervisor except for xen pv time ops are initialized in
init_hypervisor_platform().

Xen PV domains initialize time ops in x86_init.paging.pagetable_init(),
by calling xen_setup_shared_info() which is a poor design, as time is
needed prior to memory allocator.

xen_setup_shared_info() is called from two places: during boot, and
after suspend. Split the content of xen_setup_shared_info() into
three places:

1. add the clock relavent data into new xen pv init_platform vector, and
   set clock ops in there.

2. move xen_setup_vcpu_info_placement() to new xen_pv_guest_late_init()
   call.

3. Re-initializing parts of shared info copy to xen_pv_post_suspend() to
   be symmetric to xen_pv_pre_suspend
Signed-off-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: steven.sistare@oracle.com
Cc: daniel.m.jordan@oracle.com
Cc: linux@armlinux.org.uk
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
Cc: john.stultz@linaro.org
Cc: sboyd@codeaurora.org
Cc: hpa@zytor.com
Cc: douly.fnst@cn.fujitsu.com
Cc: peterz@infradead.org
Cc: prarit@redhat.com
Cc: feng.tang@intel.com
Cc: pmladek@suse.com
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: linux-s390@vger.kernel.org
Cc: boris.ostrovsky@oracle.com
Cc: jgross@suse.com
Cc: pbonzini@redhat.com
Link: https://lkml.kernel.org/r/20180719205545.16512-13-pasha.tatashin@oracle.com

Doing an audit of trace events, I discovered two trace events in the xen
subsystem that use a hack to create zero data size trace events. This is not
what trace events are for. Trace events add memory footprint overhead, and
if all you need to do is see if a function is hit or not, simply make that
function noinline and use function tracer filtering.

Worse yet, the hack used was:

 __array(char, x, 0)

Which creates a static string of zero in length. There's assumptions about
such constructs in ftrace that this is a dynamic string that is nul
terminated. This is not the case with these tracepoints and can cause
problems in various parts of ftrace.

Nuke the trace events!

Link: http://lkml.kernel.org/r/20180509144605.5a220327@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 95a7d768 ("xen/mmu: Use Xen specific TLB flush instead of the generic one.")
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Juergen Gross noticed that commit f7f99100 ("mm: stop zeroing memory
during allocation in vmemmap") broke XEN PV domains when deferred struct
page initialization is enabled.

This is because the xen's PagePinned() flag is getting erased from
struct pages when they are initialized later in boot.

Juergen fixed this problem by disabling deferred pages on xen pv
domains.  It is desirable, however, to have this feature available as it
reduces boot time.  This fix re-enables the feature for pv-dmains, and
fixes the problem the following way:

The fix is to delay setting PagePinned flag until struct pages for all
allocated memory are initialized, i.e.  until after free_all_bootmem().

A new x86_init.hyper op init_after_bootmem() is called to let xen know
that boot allocator is done, and hence struct pages for all the
allocated memory are now initialized.  If deferred page initialization
is enabled, the rest of struct pages are going to be initialized later
in boot once page_alloc_init_late() is called.

xen_after_bootmem() walks page table's pages and marks them pinned.

Link: http://lkml.kernel.org/r/20180226160112.24724-2-pasha.tatashin@oracle.comSigned-off-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Tested-by: NJuergen Gross <jgross@suse.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Jinbum Park <jinb.park7@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jia Zhang <zhang.jia@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With boot-time switching between paging modes, XEN_PV and XEN_PVH can be
boot into 4-level paging mode.
Tested-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180216114948.68868-2-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

flush_tlb_single() and flush_tlb_one() sound almost identical, but
they really mean "flush one user translation" and "flush one kernel
translation".  Rename them to flush_tlb_one_user() and
flush_tlb_one_kernel() to make the semantics more obvious.

[ I was looking at some PTI-related code, and the flush-one-address code
  is unnecessarily hard to understand because the names of the helpers are
  uninformative.  This came up during PTI review, but no one got around to
  doing it. ]
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Variable Length Arrays In Structs (VLAIS) is not supported by Clang, and
frowned upon by others.

https://lkml.org/lkml/2013/9/23/500

Here, the VLAIS was used because the size of the bitmap returned from
xen_mc_entry() depended on possibly (based on kernel configuration)
runtime sized data. Rather than declaring args as a VLAIS then calling
sizeof on *args, we calculate the appropriate sizeof args manually.
Further, we can get rid of the #ifdef's and rely on num_possible_cpus()
(thanks to a helpful checkpatch warning from an earlier version of this
patch).
Suggested-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NNick Desaulniers <nick.desaulniers@gmail.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

Put the cpu_entry_area into a separate P4D entry. The fixmap gets too big
and 0-day already hit a case where the fixmap PTEs were cleared by
cleanup_highmap().

Aside of that the fixmap API is a pain as it's all backwards.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

A few thousand such pages are usually left around due to the re-use of
L1 tables having been provided by the hypervisor (Dom0) or tool stack
(DomU). Set NX in the direct map variant, which needs to be done in L2
due to the dual use of the re-used L1s.

For x86_configure_nx() to actually do what it is supposed to do, call
get_cpu_cap() first. This was broken by commit 4763ed4d ("x86, mm:
Clean up and simplify NX enablement") when switching away from the
direct EFER read.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

Currently, the GDT is an ad-hoc array of pages, one per CPU, in the
fixmap.  Generalize it to be an array of a new 'struct cpu_entry_area'
so that we can cleanly add new things to it.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Link: https://lkml.kernel.org/r/20171204150605.563271721@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Physical addresses on processors supporting 5 level paging can be up to
52 bits wide. For a Xen pv guest running on such a machine those
physical addresses have to be supported in order to be able to use any
memory on the machine even if the guest itself does not support 5 level
paging.

So when reading/writing a MFN from/to a pte don't use the kernel's
PTE_PFN_MASK but a new XEN_PTE_MFN_MASK allowing full 40 bit wide MFNs.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

It was decided 5-level paging is not going to be supported in XEN_PV.

Let's drop the dead code from the XEN_PV code.
Tested-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@suse.de>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170929140821.37654-6-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When bootup a PVM guest with large memory(Ex.240GB), XEN provided initial
mapping overlaps with kernel module virtual space. When mapping in this space
is cleared by xen_cleanhighmap(), in certain case there could be an 2MB mapping
left. This is due to XEN initialize 4MB aligned mapping but xen_cleanhighmap()
finish at 2MB boundary.

When module loading is just on top of the 2MB space, got below warning:

WARNING: at mm/vmalloc.c:106 vmap_pte_range+0x14e/0x190()
Call Trace:
 [<ffffffff81117083>] warn_alloc_failed+0xf3/0x160
 [<ffffffff81146022>] __vmalloc_area_node+0x182/0x1c0
 [<ffffffff810ac91e>] ? module_alloc_update_bounds+0x1e/0x80
 [<ffffffff81145df7>] __vmalloc_node_range+0xa7/0x110
 [<ffffffff810ac91e>] ? module_alloc_update_bounds+0x1e/0x80
 [<ffffffff8103ca54>] module_alloc+0x64/0x70
 [<ffffffff810ac91e>] ? module_alloc_update_bounds+0x1e/0x80
 [<ffffffff810ac91e>] module_alloc_update_bounds+0x1e/0x80
 [<ffffffff810ac9a7>] move_module+0x27/0x150
 [<ffffffff810aefa0>] layout_and_allocate+0x120/0x1b0
 [<ffffffff810af0a8>] load_module+0x78/0x640
 [<ffffffff811ff90b>] ? security_file_permission+0x8b/0x90
 [<ffffffff810af6d2>] sys_init_module+0x62/0x1e0
 [<ffffffff815154c2>] system_call_fastpath+0x16/0x1b

Then the mapping of 2MB is cleared, finally oops when the page in that space is
accessed.

BUG: unable to handle kernel paging request at ffff880022600000
IP: [<ffffffff81260877>] clear_page_c_e+0x7/0x10
PGD 1788067 PUD 178c067 PMD 22434067 PTE 0
Oops: 0002 [#1] SMP
Call Trace:
 [<ffffffff81116ef7>] ? prep_new_page+0x127/0x1c0
 [<ffffffff81117d42>] get_page_from_freelist+0x1e2/0x550
 [<ffffffff81133010>] ? ii_iovec_copy_to_user+0x90/0x140
 [<ffffffff81119c9d>] __alloc_pages_nodemask+0x12d/0x230
 [<ffffffff81155516>] alloc_pages_vma+0xc6/0x1a0
 [<ffffffff81006ffd>] ? pte_mfn_to_pfn+0x7d/0x100
 [<ffffffff81134cfb>] do_anonymous_page+0x16b/0x350
 [<ffffffff81139c34>] handle_pte_fault+0x1e4/0x200
 [<ffffffff8100712e>] ? xen_pmd_val+0xe/0x10
 [<ffffffff810052c9>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
 [<ffffffff81139dab>] handle_mm_fault+0x15b/0x270
 [<ffffffff81510c10>] do_page_fault+0x140/0x470
 [<ffffffff8150d7d5>] page_fault+0x25/0x30

Call xen_cleanhighmap() with 4MB aligned for page tables mapping to fix it.
The unnecessory call of xen_cleanhighmap() in DEBUG mode is also removed.

-v2: add comment about XEN alignment from Juergen.

References: https://lists.xen.org/archives/html/xen-devel/2012-07/msg01562.htmlSigned-off-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>

[boris: added 'xen/mmu' tag to commit subject]
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

gcc-4.6 causes a harmless link-time warning:

WARNING: vmlinux.o(.text.unlikely+0x48e): Section mismatch in reference from the function xen_find_pt_base() to the function .init.text:m2p()
The function xen_find_pt_base() references
the function __init m2p().
This is often because xen_find_pt_base lacks a __init
annotation or the annotation of m2p is wrong.

Newer compilers inline this function, so it never shows up, but marking
it __init is the right way to avoid the warning.

Fixes: 70e61199 ("xen: move p2m list if conflicting with e820 map")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

With removal of lguest some of the paravirt functions are no longer
needed:

	->read_cr4()
	->store_idt()
	->set_pmd_at()
	->set_pud_at()
	->pte_update()

Remove them.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akataria@vmware.com
Cc: boris.ostrovsky@oracle.com
Cc: chrisw@sous-sol.org
Cc: jeremy@goop.org
Cc: rusty@rustcorp.com.au
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20170904102527.25409-1-jgross@suse.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The function xen_set_domain_pte() is used nowhere in the kernel.
Remove it.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Acked-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

As Eric said,
 "what we need to do is move the variable vmcoreinfo_note out of the
  kernel's .bss section. And modify the code to regenerate and keep this
  information in something like the control page.

  Definitely something like this needs a page all to itself, and ideally
  far away from any other kernel data structures. I clearly was not
  watching closely the data someone decided to keep this silly thing in
  the kernel's .bss section."

This patch allocates extra pages for these vmcoreinfo_XXX variables, one
advantage is that it enhances some safety of vmcoreinfo, because
vmcoreinfo now is kept far away from other kernel data structures.

Link: http://lkml.kernel.org/r/1493281021-20737-1-git-send-email-xlpang@redhat.comSigned-off-by: NXunlei Pang <xlpang@redhat.com>
Tested-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Suggested-by: NEric Biederman <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

x86's lazy TLB mode used to be fairly weak -- it would switch to
init_mm the first time it tried to flush a lazy TLB.  This meant an
unnecessary CR3 write and, if the flush was remote, an unnecessary
IPI.

Rewrite it entirely.  When we enter lazy mode, we simply remove the
CPU from mm_cpumask.  This means that we need a way to figure out
whether we've missed a flush when we switch back out of lazy mode.
I use the tlb_gen machinery to track whether a context is up to
date.

Note to reviewers: this patch, my itself, looks a bit odd.  I'm
using an array of length 1 containing (ctx_id, tlb_gen) rather than
just storing tlb_gen, and making it at array isn't necessary yet.
I'm doing this because the next few patches add PCID support, and,
with PCID, we need ctx_id, and the array will end up with a length
greater than 1.  Making it an array now means that there will be
less churn and therefore less stress on your eyeballs.

NB: This is dubious but, AFAICT, still correct on Xen and UV.
xen_exit_mmap() uses mm_cpumask() for nefarious purposes and this
patch changes the way that mm_cpumask() works.  This should be okay,
since Xen *also* iterates all online CPUs to find all the CPUs it
needs to twiddle.

The UV tlbflush code is rather dated and should be changed.

Here are some benchmark results, done on a Skylake laptop at 2.3 GHz
(turbo off, intel_pstate requesting max performance) under KVM with
the guest using idle=poll (to avoid artifacts when bouncing between
CPUs).  I haven't done any real statistics here -- I just ran them
in a loop and picked the fastest results that didn't look like
outliers.  Unpatched means commit a4eb8b99, so all the
bookkeeping overhead is gone.

MADV_DONTNEED; touch the page; switch CPUs using sched_setaffinity.  In
an unpatched kernel, MADV_DONTNEED will send an IPI to the previous CPU.
This is intended to be a nearly worst-case test.

  patched:         13.4µs
  unpatched:       21.6µs

Vitaly's pthread_mmap microbenchmark with 8 threads (on four cores),
nrounds = 100, 256M data

  patched:         1.1 seconds or so
  unpatched:       1.9 seconds or so

The sleepup on Vitaly's test appearss to be because it spends a lot
of time blocked on mmap_sem, and this patch avoids sending IPIs to
blocked CPUs.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Reviewed-by: NNadav Amit <nadav.amit@gmail.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Travis <travis@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/ddf2c92962339f4ba39d8fc41b853936ec0b44f1.1498751203.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

With CONFIG_X86_5LEVEL=y, level 4 is no longer top level of page tables.

Let's give these variable more generic names: init_top_pgt and
early_top_pgt.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170606113133.22974-9-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The kernel has several code paths that read CR3.  Most of them assume that
CR3 contains the PGD's physical address, whereas some of them awkwardly
use PHYSICAL_PAGE_MASK to mask off low bits.

Add explicit mask macros for CR3 and convert all of the CR3 readers.
This will keep them from breaking when PCID is enabled.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: xen-devel <xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/883f8fb121f4616c1c1427ad87350bb2f5ffeca1.1497288170.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Lazy TLB state is currently managed in a rather baroque manner.
AFAICT, there are three possible states:

 - Non-lazy.  This means that we're running a user thread or a
   kernel thread that has called use_mm().  current->mm ==
   current->active_mm == cpu_tlbstate.active_mm and
   cpu_tlbstate.state == TLBSTATE_OK.

 - Lazy with user mm.  We're running a kernel thread without an mm
   and we're borrowing an mm_struct.  We have current->mm == NULL,
   current->active_mm == cpu_tlbstate.active_mm, cpu_tlbstate.state
   != TLBSTATE_OK (i.e. TLBSTATE_LAZY or 0).  The current cpu is set
   in mm_cpumask(current->active_mm).  CR3 points to
   current->active_mm->pgd.  The TLB is up to date.

 - Lazy with init_mm.  This happens when we call leave_mm().  We
   have current->mm == NULL, current->active_mm ==
   cpu_tlbstate.active_mm, but that mm is only relelvant insofar as
   the scheduler is tracking it for refcounting.  cpu_tlbstate.state
   != TLBSTATE_OK.  The current cpu is clear in
   mm_cpumask(current->active_mm).  CR3 points to swapper_pg_dir,
   i.e. init_mm->pgd.

This patch simplifies the situation.  Other than perf, x86 stops
caring about current->active_mm at all.  We have
cpu_tlbstate.loaded_mm pointing to the mm that CR3 references.  The
TLB is always up to date for that mm.  leave_mm() just switches us
to init_mm.  There are no longer any special cases for mm_cpumask,
and switch_mm() switches mms without worrying about laziness.

After this patch, cpu_tlbstate.state serves only to tell the TLB
flush code whether it may switch to init_mm instead of doing a
normal flush.

This makes fairly extensive changes to xen_exit_mmap(), which used
to look a bit like black magic.

Perf is unchanged.  With or without this change, perf may behave a bit
erratically if it tries to read user memory in kernel thread context.
We should build on this patch to teach perf to never look at user
memory when cpu_tlbstate.loaded_mm != current->mm.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Rather than passing all the contents of flush_tlb_info to
flush_tlb_others(), pass a pointer to the structure directly. For
consistency, this also removes the unnecessary cpu parameter from
uv_flush_tlb_others() to make its signature match the other
*flush_tlb_others() functions.

This serves two purposes:

 - It will dramatically simplify future patches that change struct
   flush_tlb_info, which I'm planning to do.

 - struct flush_tlb_info is an adequate description of what to do
   for a local flush, too, so by reusing it we can remove duplicated
   code between local and remove flushes in a future patch.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
[ Fix build warning. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

There are some leftovers testing for pvh guest mode in pv-only source
files. Remove them.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

When booted as pv-guest the p2m list presented by the Xen is already
mapped to virtual addresses. In dom0 case the hypervisor might make use
of 2M- or 1G-pages for this mapping. Unfortunately while being properly
aligned in virtual and machine address space, those pages might not be
aligned properly in guest physical address space.

So when trying to obtain the guest physical address of such a page
pud_pfn() and pmd_pfn() must be avoided as those will mask away guest
physical address bits not being zero in this special case.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

For kdump to work correctly it needs the physical address of
vmcoreinfo_note. When running as dom0 this means the virtual address
has to be translated to the related machine address.

paddr_vmcoreinfo_note() is meant to do the translation via
__pa_symbol() only, but being attributed "weak" it can be replaced
easily in Xen case.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Tested-by: NPetr Tesarik <ptesarik@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: NDaniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

Basically, mmu.c is renamed to mmu_pv.c and some code moved out to common
mmu.c.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

Move PVHVM related code to mmu_hvm.c.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

This patch converts x86 to use proper folding of a new (fifth) page table level
with <asm-generic/pgtable-nop4d.h>.

That's a bit of a kitchen sink patch, but I don't see how to split it further
without hurting bisectability.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170317185515.8636-7-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Split these helpers into a couple of per-level functions and add support for
an additional page table level.
Signed-off-by: NXiong Zhang <xiong.y.zhang@intel.com>
[ Split off into separate patch ]
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170317185515.8636-6-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Each processor holds a GDT in its per-cpu structure. The sgdt
instruction gives the base address of the current GDT. This address can
be used to bypass KASLR memory randomization. With another bug, an
attacker could target other per-cpu structures or deduce the base of
the main memory section (PAGE_OFFSET).

This patch relocates the GDT table for each processor inside the
fixmap section. The space is reserved based on number of supported
processors.

For consistency, the remapping is done by default on 32 and 64-bit.

Each processor switches to its remapped GDT at the end of
initialization. For hibernation, the main processor returns with the
original GDT and switches back to the remapping at completion.

This patch was tested on both architectures. Hibernation and KVM were
both tested specially for their usage of the GDT.

Thanks to Boris Ostrovsky <boris.ostrovsky@oracle.com> for testing and
recommending changes for Xen support.
Signed-off-by: NThomas Garnier <thgarnie@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Luis R . Rodriguez <mcgrof@kernel.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: kernel-hardening@lists.openwall.com
Cc: kvm@vger.kernel.org
Cc: lguest@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-pm@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Cc: zijun_hu <zijun_hu@htc.com>
Link: http://lkml.kernel.org/r/20170314170508.100882-2-thgarnie@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Update code that relied on sched.h including various MM types for them.

This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We are replacing existing PVH guests with new implementation.

We are keeping xen_pvh_domain() macro (for now set to zero) because
when we introduce new PVH implementation later in this series we will
reuse current PVH-specific code (xen_pvh_gnttab_setup()), and that
code is conditioned by 'if (xen_pvh_domain())'. (We will also need
a noop xen_pvh_domain() for !CONFIG_XEN_PVH).
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In line with asm/e820/types.h, move the e820 API declarations to
asm/e820/api.h and update all usage sites.

This is just a mechanical, obviously correct move & replace patch,
there will be subsequent changes to clean up the code and to make
better use of the new header organization.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20160714001901.31603-7-paul.gortmaker@windriver.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When page tables entries are set using xen_set_pte_init() during early
boot there is no page fault handler that could handle a fault when
performing an M2P lookup.

In 64 bit guests (usually dom0) early_ioremap() would fault in
xen_set_pte_init() because an M2P lookup faults because the MFN is in
MMIO space and not mapped in the M2P.  This lookup is done to see if
the PFN in in the range used for the initial page table pages, so that
the PTE may be set as read-only.

The M2P lookup can be avoided by moving the check (and clear of RW)
earlier when the PFN is still available.
Reported-by: NKevin Moraga <kmoragas@riseup.net>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>

xen_cleanhighmap() is operating on level2_kernel_pgt only. The upper
bound of the loop setting non-kernel-image entries to zero should not
exceed the size of level2_kernel_pgt.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>