We found the following warning when using W=1 to build kernel:

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3634:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
int ret, coe = priv->hw->rx_csum;

When digging stmmac_get_rx_header_len(), dwmac4_get_rx_header_len() and
dwxgmac2_get_rx_header_len() return 0 only, without any error code to
report. Therefore, it's better to define get_rx_header_len() as void.
Signed-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Awogbemila says:

====================
Add GVE Features.

Note: Patch 4 in v3 was dropped.

Patch 4 (patch 5 in v3): Start/stop timer only when report stats is
				enabled/disabled.
Patch 7 (patch 8 in v3): Use netdev_info, not dev_info, to log
				device link status.
====================
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change allows the driver to report the device link speed
when the ethtool command:
	ethtool <nic name>
is run.
Getting the link speed is done via a new admin queue command:
ReportLinkSpeed.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This makes the driver better aware of the connectivity status of the
device. Based on the device's status register, the driver can call
netif_carrier_{on,off}.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NPatricio Noyola <patricion@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds support for batching AQ commands and uses it for creating and
destroying queues.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NSagi Shahar <sagis@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds per queue NIC stats to ethtool stats and to report-stats.
These stats are always exposed to guest whether or not the
report-stats flag is turned on.
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds functionality to report driver stats to Hypervisor.
(Users may want to turn this feature off as a matter of privacy
so a "report-stats" flag is added as an ethtool priv option.
It is also disabled by default.)
The hypervisor would trigger a stats report in case "too many"
packets dropped; the stats would be useful in debugging stuck
queues.
A "stats_report_trigger_cnt" stat is added to count the number of times
the hypervisor attempts to trigger stats report.

A timer is also added so that when report-stats is enabled, stat are
updated once every 20 seconds.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NKuo Zhao <kuozhao@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the driver to use dev_info/err instead of netif_info/err.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NCatherine Sullivan <csully@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sample output of "ethtool -S <interface-name>" with 1 RX queue and 1 TX
queue:
NIC statistics:
     rx_packets: 1039
     tx_packets: 37
     rx_bytes: 822071
     tx_bytes: 4100
     rx_dropped: 0
     tx_dropped: 0
     tx_timeouts: 0
     rx_skb_alloc_fail: 0
     rx_buf_alloc_fail: 0
     rx_desc_err_dropped_pkt: 0
     interface_up_cnt: 1
     interface_down_cnt: 0
     reset_cnt: 0
     page_alloc_fail: 0
     dma_mapping_error: 0
     rx_posted_desc[0]: 1365
     rx_completed_desc[0]: 341
     rx_bytes[0]: 215094
     rx_dropped_pkt[0]: 0
     rx_copybreak_pkt[0]: 3
     rx_copied_pkt[0]: 3
     tx_posted_desc[0]: 6
     tx_completed_desc[0]: 6
     tx_bytes[0]: 420
     tx_wake[0]: 0
     tx_stop[0]: 0
     tx_event_counter[0]: 6
     adminq_prod_cnt: 34
     adminq_cmd_fail: 0
     adminq_timeouts: 0
     adminq_describe_device_cnt: 1
     adminq_cfg_device_resources_cnt: 1
     adminq_register_page_list_cnt: 16
     adminq_unregister_page_list_cnt: 0
     adminq_create_tx_queue_cnt: 8
     adminq_create_rx_queue_cnt: 8
     adminq_destroy_tx_queue_cnt: 0
     adminq_destroy_rx_queue_cnt: 0
     adminq_dcfg_device_resources_cnt: 0
     adminq_set_driver_parameter_cnt: 0
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NKuo Zhao <kuozhao@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds support for getting and setting the RX copybreak
value via ethtool.
Reviewed-by: NYangchun Fu <yangchun@google.com>
Signed-off-by: NKuo Zhao <kuozhao@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-2020-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.10

First set of patches for v5.10. Most noteworthy here is ath11k getting
initial support for QCA6390 and IPQ6018 devices. But most of the
patches are cleanup: W=1 warning fixes, fallthrough keywords, DMA API
changes and tasklet API changes.

Major changes:

ath10k

* support SDIO firmware codedumps

* support station specific TID configurations

ath11k

* add support for IPQ6018

* add support for QCA6390 PCI devices

ath9k

* add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to improve PTK0
  rekeying

wcn36xx

* add support for TX ack
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ath.git patches for v5.10. Major changes:

ath10k

* support SDIO firmware codedumps

* support station specific TID configurations

ath11k

* add support for IPQ6018

There is no caller in tree, so can remove it.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200909135834.38448-1-yuehaibing@huawei.com

There is no caller in tree, so can remove it.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200909134533.19604-1-yuehaibing@huawei.com

If CONFIG_REMOTEPROC was disabled the linking failed with:

ERROR: modpost: "rproc_get_by_phandle" [drivers/net/wireless/ath/ath11k/ath11k.ko] undefined!

Compile tested only.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Fixes: 1ff8ed78 ("ath11k: use remoteproc only with AHB devices")
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/0101017476e38f40-c4168ac4-c00a-4220-a032-fe17e4a157cb-000000@us-west-2.amazonses.com

During probe ath11k_init_hw_params() is called from ath11k_core_pre_init()
and is not needed agian in ath11k_core_init().

Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1

Fixes: 1ff8ed78 (ath11k: use remoteproc only with AHB devices)
Signed-off-by: NAnilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746d2a40d3-25cd7dbe-c0dd-4fdf-8735-366d7fb40207-000000@us-west-2.amazonses.com

Adding raw mode tx/rx support. Also, adding support
for software crypto which depends on raw mode.

To enable raw mode tx/rx:
insmod ath11k.ko frame_mode=0

To enable software crypto:
insmod ath11k.ko crypto_mode=1

These modes could be helpful in debugging crypto related issues.

Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: NManikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: NVenkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746c6a52d9-18302a2c-0d6d-4057-aa4b-95960c809646-000000@us-west-2.amazonses.com

IPQ6018 has one 5G and one 2G radio with 2x2,
shares ipq8074 configurations.

Tested on: IPQ6018 hw1.0 AHB WLAN.HK.2.2-02134-QCAHKSWPL_SILICONZ-1
Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Signed-off-by: NAnilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746cb68b63-c2bc31ec-a31e-442e-a572-26f4c045c06b-000000@us-west-2.amazonses.com

Move target CE config and target CE service config to hw_params.
No functional changes.

Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Signed-off-by: NAnilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746cb685d9-6bedeccb-29a1-4d32-8664-fcfe7d105f4a-000000@us-west-2.amazonses.com

Add IPQ6018 wireless driver support,
its based on ath11k driver.
Signed-off-by: NAnilkumar Kolli <akolli@codeaurora.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746cb6751a-ca300933-1174-4534-a01b-b1dbf1c1f305-000000@us-west-2.amazonses.com

Fixes the following warning when using W=1 to build kernel:

drivers/net/ethernet/smsc/smc91x.c: In function ‘smc_phy_configure’:
drivers/net/ethernet/smsc/smc91x.c:1039:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
  int status;
Signed-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Karsten Graul says:

====================
net/smc: updates 2020-09-10

Please apply the following patch series for smc to netdev's net-next tree.

This patch series is a mix of various improvements and cleanups.
The patches 1 and 10 improve the handling of large parallel workloads.
Patch 8 corrects a kernel config default for config CCWGROUP on s390.
Patch 9 allows userspace tools to retrieve socket information for more
sockets.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are 6 types of workers which exist per smc connection. 3 of them
are used for listen and handshake processing, another 2 are used for
close and abort processing and 1 is the tx worker that moves calls to
sleeping functions into a worker.
To prevent flooding of the system work queue when many connections are
opened or closed at the same time (some pattern uperf implements), move
those workers to one of 3 smc-specific work queues. Two work queues are
module-global and used for handshake and close workers. The third work
queue is defined per link group and used by the tx workers that may
sleep waiting for resources of this link group.
And in smc_llc_enqueue() queue the llc_event_work work to the system
prio work queue because its critical that this work is started fast.
Reviewed-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the netlink messages to be sent to the userspace
are too big for a single netlink message, send them in
chunks using the netlink_dump infrastructure. Modify the
smc diag dump code so that it can signal to the netlink_dump
infrastructure that it needs to send more data.
Signed-off-by: NGuvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

arch/s390/net/pnet.c uses ccwgroup function dev_is_ccwgroup()
in pnetid_by_dev_port().
For s390 the net/smc code makes use of function pnetid_by_dev_port().
Make sure ccwgroup is built into the kernel, if smc is to be built
into the kernel.
Signed-off-by: NGuvenc Gulce <guvenc@linux.ibm.com>
Reviewed-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

smc_lgr_cleanup_early() schedules the free worker with delay. DMB
unregistering occurs in this delayed worker increasing the risk
to reach the SMCD SBA limit without need. Terminate the
linkgroup immediately, since termination means early DMB unregistering.

For SMCD the global smc_server_lgr_pending lock is given up early.
A linkgroup to be given up with smc_lgr_cleanup_early() may already
contain more than one connection. Using __smc_lgr_terminate() in
smc_lgr_cleanup_early() covers this.

And consolidate smc_ism_put_vlan() and smc_put_device() into smc_lgr_free()
only.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

smc_listen_work() contains already an smc_listen_decline() exit.
Use this exit for smc_listen_rdma_finish() problems as well.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move check whether peer can be reached into smc_pnet_find_ism_by_pnetid().
Thus searching continues for another ism device, if check fails.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

smc_clc_send_accept() and smc_clc_send_confirm() are quite similar.
Move common code into a separate function smc_clc_send_confirm_accept().
And introduce separate SMCD and SMCR struct definitions for CLC accept
resp. confirm.
No functional change.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reduce stack size for smc_listen_work() and smc_clc_send_proposal()
by dynamic allocation of the CLC buffer to be received or sent.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Field names "srv_first_contact" and "cln_first_contact" are misleading,
since they apply to both, server and client. Rename them to
"first_contact_peer" and "first_contact_local".
Rename "ism_gid" by the more precise name "ism_peer_gid".
Rename version constant "SMC_CLC_V1" into "SMC_V1".
No functional change.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SMC starts a separate tcp_listen worker for every SMC socket in
state SMC_LISTEN, and can accept an incoming connection request only,
if this worker is really running and waiting in kernel_accept(). But
the number of running workers is limited.
This patch reworks the listening SMC code and starts a tcp_listen worker
after the SYN-ACK handshake on the internal clc-socket only.
Suggested-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Reviewed-by: NGuvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Krzysztof Kozlowski says:

====================
nfc: s3fwrn5: Few cleanups

Changes since v2:
1. Fix dtschema ID after rename (patch 1/8).
2. Apply patch 9/9 (defconfig change).

Changes since v1:
1. Rename dtschema file and add additionalProperties:false, as Rob
   suggested,
2. Add Marek's tested-by,
3. New patches: #4, #5, #6, #7 and #9.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since "s3fwrn5" is not a valid vendor prefix, use new GPIO properties
instead of the deprecated.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Robert Bałdyga's email does not work (bounces) since 2016 so remove it.
Additionally there are no review/ack/tested tags from Krzysztof Opasiak
so it looks like the driver is not supported.

As a maintainer of Samsung ARM/ARM64 SoC, I can take care about this
driver and provide some review.  However clearly driver is not in
supported mode as I do not work in Samsung anymore.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Two functions accept pointer to struct s3fwrn5_fw_info but do not
modify the contents.  Make them const so the code is a little bit safer.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver uses crypto hash functions so it needs to select CRYPTO_HASH.
This fixes build errors:

  arc-linux-ld: drivers/nfc/s3fwrn5/firmware.o: in function `s3fwrn5_fw_download':
  firmware.c:(.text+0x152): undefined reference to `crypto_alloc_shash'
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The local variable 'ret' can be removed:

  drivers/nfc/s3fwrn5/i2c.c:167:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The device tree property prefix describes the vendor, which in case of
S3FWRN5 chip is Samsung.  Therefore the "s3fwrn5" prefix for "en-gpios"
and "fw-gpios" is not correct and should be deprecated.  Introduce
properly named properties for these GPIOs but still support deprecated
ones.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The device tree property prefix describes the vendor, which in case of
S3FWRN5 chip is Samsung.  Therefore the "s3fwrn5" prefix for "en-gpios"
and "fw-gpios" is not correct and should be deprecated.  Introduce
properly named properties for these GPIOs and rename the fw-gpios" to
"wake-gpios" to better describe its purpose.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>