Without this, the following scenario is incorrectly determined
to be invalid.

addr 0x7f_ffffe000 size 8192 addr_limit 0x80_00000000

This behavior was observed while trying to vmsplice the stack
as part of a CRIU dump of a process on a system started with the
norandmaps kernel parameter.
Signed-off-by: NChristopher Covington <cov@codeaurora.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Probably due to rebasing over the lengthy time it took to get the patch
merged commit addea9ef (cpufreq: enable ARM drivers on arm64) added
a duplicate Power management options section.  Add CPUfreq to the CPU
power management section and remove a duplicate include of the main
power section.
Signed-off-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Rather than have separate hugetlb and transparent huge page pmd
manipulation functions, re-wire our thp functions to simply call the
pte equivalents.

This allows THP to take advantage of the new PTE_WRITE logic introduced
in:
  c2c93e5b arm64: mm: Introduce PTE_WRITE

To represent splitting THPs we use the PTE_SPECIAL bit as this is not
used for pmds.
Signed-off-by: NSteve Capper <steve.capper@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

asm-generic offers an atomic-add based rwsem implementation, which
can avoid the need for heavier, spinlock-based synchronisation on the
fast path.

This patch makes use of the optimised implementation for arm64 CPUs.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

asm-generic/rwsem.h used to live under arch/powerpc. During its
liberation to common code, a few references to its former home where
preserved, in particular the definition of RWSEM_ACTIVE_MASK is
predicated on CONFIG_PPC64.

This patch updates the ifdefs and comments to architecturally neutral
versions.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NRichard Kuo <rkuo@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This enables support for the generic CPU feature modalias implementation that
wires up optional CPU features to udev based module autoprobing.

A file <asm/cpufeature.h> is provided that maps CPU feature numbers to
elf_hwcap bits, which is the standard way on arm64 to advertise optional CPU
features both internally and to user space.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
[catalin.marinas@arm.com: removed unnecessary "!!"]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Make smp_spin_table_cpu_postboot() static, because this function
is used only in this file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Make local symbols static, because these are used only in this
file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add support for unwinding using the dwarf information in compat
mode. Using the correct user stack pointer allows perf to record
the frames correctly in the native and compat modes.

Note that although the dwarf frame unwinding works ok using
libunwind in native mode (on ARMv7 & ARMv8), some changes are
required to the libunwind code for the compat mode. Those changes
are posted separately on the libunwind mailing list.

Tested on ARMv8 platform with v8 and compat v7 binaries, the latter
are statically built.
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

When profiling a 32-bit application, user space callchain unwinding
using the frame pointer is performed in compat mode. The code is taken
over from the AARCH32 code and adapted to work on AARCH64.
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch implements the functions required for the perf registers API,
allowing the perf tool to interface kernel register dumps with libunwind
in order to provide userspace backtracing.
Compat mode is also supported.

Only the general purpose user space registers are exported, i.e.:
 PERF_REG_ARM_X0,
 ...
 PERF_REG_ARM_X28,
 PERF_REG_ARM_FP,
 PERF_REG_ARM_LR,
 PERF_REG_ARM_SP,
 PERF_REG_ARM_PC
and not the PERF_REG_ARM_V* registers.
Signed-off-by: NJean Pihet <jean.pihet@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

ARMv8 supports a range of physical address bit sizes. The PARange bits
from ID_AA64MMFR0_EL1 register are read during boot-time and the
intermediate physical address size bits are written in the translation
control registers (TCR_EL1 and VTCR_EL2).

There is no change in the VA bits and levels of translation.
Signed-off-by: NRadha Mohan Chintakuntla <rchintakuntla@cavium.com>
Reviewed-by: NWill Deacon <Will.deacon@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Special pte mappings are not intended to be executable and do not even
have an associated struct page. This patch ensures that we do not call
__sync_icache_dcache() on such ptes.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reported-by: NSteve Capper <Steve.Capper@arm.com>
Tested-by: NLaura Abbott <lauraa@codeaurora.org>
Tested-by: NBharat Bhushan <Bharat.Bhushan@freescale.com>
Cc: <stable@vger.kernel.org>

pgprot_{dmacoherent,writecombine,noncached} don't need to generate
executable mappings with side-effects like __sync_icache_dcache() being
called when the mapping is in user space.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reported-by: NBharat Bhushan <Bharat.Bhushan@freescale.com>
Tested-by: NLaura Abbott <lauraa@codeaurora.org>
Tested-by: NBharat Bhushan <Bharat.Bhushan@freescale.com>
Cc: <stable@vger.kernel.org>

Commit 8adbf57f ("irqchip: gic: use dmb ishst instead of dsb when
raising a softirq") added an explicit dmb(...) call to the GIC driver.

This patch adds a simple dmb() macro to arm64, which expands to a DMB SY
instruction.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add basic CPU topology support to arm64, based on the existing pre-v8
code and some work done by Mark Hambleton.  This patch does not
implement any topology discovery support since that should be based on
information from firmware, it merely implements the scaffolding for
integration of topology support in the architecture.

No locking of the topology data is done since it is only modified during
CPU bringup with external serialisation from the SMP code.

The goal is to separate the architecture hookup for providing topology
information from the DT parsing in order to ease review and avoid
blocking the architecture code (which will be built on by other work)
with the DT code review by providing something simple and basic.

Following patches will implement support for interpreting topology
information from MPIDR and for parsing the DT topology bindings for ARM,
similar patches will be needed for ACPI.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: removed CONFIG_CPU_TOPOLOGY, always on if SMP]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This adds support for advertising the presence of ARMv8 Crypto
Extensions in the Aarch32 execution state to 32-bit ELF binaries
running in 32-bit compat mode under the arm64 kernel.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add support for the ELF auxv entry AT_HWCAP2 when running 32-bit
ELF binaries in compat mode.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add ELF_HWCAP2 to the set of auxv entries that is passed to
a 32-bit ELF program running in 32-bit compat mode under a
64-bit kernel.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Currently we flush the entire dcache at boot within __cpu_setup, but
this is unnecessary as the booting protocol demands that the dcache is
invalid and off upon entering the kernel. The presence of the cache
flush only serves to hide bugs in bootloaders, and is not safe in the
presence of SMP.

In an SMP boot scenario the CPUs enter coherency outside of the kernel,
and the primary CPU enables its caches before bringing up secondary
CPUs. Therefore if any secondary CPU has an entry in its cache (in
violation of the boot protocol), the primary CPU might snoop it even if
the secondary CPU's cache is disabled. The boot-time cache flush only
serves to hide a firmware bug, and slows down a cpu boot unnecessarily.

This patch removes the unnecessary boot-time cache flush.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
[catalin.marinas@arm.com: make __flush_dcache_all local only]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Enable cpufreq and power kconfig menus on arm64 along with arm cpufreq
drivers. The power menu is needed for OPP support. At least on Calxeda
systems, the same cpufreq driver is used for arm and arm64 based
systems.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

psci_init() is written to return err code if something goes wrong. However,
the single user, setup_arch(), doesn't care about it. Moreover, every error
path is supplied with a clear message which is enough for pleasant debugging.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Since 652af899 "arm64: factor out spin-table
boot method" psci prefix's been introduced. We have a common pr_fmt, so clean
them up.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch adds support for DMA API cache maintenance on SoCs without
hardware device cache coherency.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Since arm64 does not support ISA, there is no need for early swiotlb
initialisation. This patch switches the DMA mapping code to
swiotlb_tlb_late_init_with_default_size(). A side effect of this is that
GFP_DMA is used for the swiotlb buffer and devices with a 32-bit
coherent mask are correctly supported.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

On arm64 we do not have two DMA zones, so it does not make sense to
implement ZONE_DMA32. This patch changes ZONE_DMA32 with ZONE_DMA, the
latter covering 32-bit dma address space to honour GFP_DMA allocations.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Remove some unnecessary bits that were apparently carried over from
another architecture's implementation:

- No need to get_page() the vdso text/data - these are part of the
  kernel image.
- No need for ClearPageReserved on the vdso text.
- No need to vmap the first text page to check the ELF header - this
  can be done through &vdso_start.

Also some minor cleanup:
- Use kcalloc for vdso_pagelist array allocation.
- Don't print on allocation failure, slab/slub will do that for us.
Signed-off-by: NNathan Lynch <nathan_lynch@mentor.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

arm64_swiotlb_alloc/free_coherent name can be misleading
somtimes with CMA support being enabled after this
patch (c2104debc235b745265b64d610237a6833fd53)

Change this name to be more generic:
__dma_alloc/free_coherent
Signed-off-by: NRitesh Harjani <ritesh.harjani@gmail.com>
[catalin.marinas@arm.com: renamed arm64_swiotlb_dma_ops to coherent_swiotlb_dma_ops]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Change the soft_restart() routine to call cpu_reset() at its identity mapped
physical address.

The cpu_reset() routine must be called at its identity mapped physical address
so that when the MMU is turned off the instruction pointer will be at the correct
location in physical memory.

Signed-off-by: Geoff Levand <geoff@infradead.org> for Huawei, Linaro
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch changes the idmap page table creation during boot to cover
the whole kernel image, allowing functions like cpu_reset() to be safely
called with the physical address.

This patch also simplifies the create_block_map asm macro to no longer
take an idmap argument and always use the phys/virt/end parameters. For
the idmap case, phys == virt.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Over the past couple of years, the generic mmu_gather gained range
tracking - 597e1c35 (mm/mmu_gather: enable tlb flush range in generic
mmu_gather), 2b047252 (Fix TLB gather virtual address range
invalidation corner cases) - and tlb_fast_mode() has been removed -
29eb7782 (arch, mm: Remove tlb_fast_mode()).

The new mmu_gather structure is now suitable for arm64 and this patch
converts the arch asm/tlb.h to the generic code. One functional
difference is the shift_arg_pages() case where previously the code was
flushing the full mm (no tlb_start_vma call) but now it flushes the
range given to tlb_gather_mmu() (possibly slightly more efficient
previously).
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>

The patch moves the PCI I/O space (currently at 64K) before the
earlyprintk mapping and extends it to 16MB.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

processor debug state PSTATE.D is unmasked in smp call
clear_os_lock for secondary cpus. So debug state is still
masked in normal kernel context.  With this patch, unmask
debug state on secondary boot for the cpus in normal kernel
context. Now kgdb tests passed with multicore.
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add HAVE_ARCH_KGDB for arm64 Kconfig
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

typecast instruction_pointer macro to unsigned long to
resolve following compiler warnings like
warning: format '%lx' expects argument of type 'long unsigned int',
but argument 2 has type 'u64' [-Wformat]
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The function kgdb_breakpoint() sets up break point at
compile time by calling arch_kgdb_breakpoint();
Though this call is surrounded by wmb() barrier,
the compile can still re-order the break point,
because this scheduling barrier is not a code motion
barrier in gcc.

Making kgdb_breakpoint() as noinline solves this problem
of code reording around break point instruction and also
avoids problem of being called as inline function from
other places

More details about discussion on this can be found here
http://comments.gmane.org/gmane.linux.ports.arm.kernel/269732Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add KGDB software step debugging support for EL1 debug
in AArch64 mode.

KGDB registers step debug handler with debug monitor.
On receiving 'step' command from GDB tool, target enables
software step debugging and step address is updated in ELR.

Software Step debugging is disabled when 'continue' command
is received
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add KGDB debug support for kernel debugging.
With this patch, basic KGDB debugging is possible.GDB register
layout is updated and GDB tool can establish connection with
target and can set/clear breakpoints.
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add macros to enable and disable to manage PSTATE.D
for debugging. The macros local_dbg_save and local_dbg_restore
are moved to irqflags.h file

KGDB boot tests fail because of PSTATE.D is masked.
unmask it for debugging support
Signed-off-by: NVijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>