Previous commit "removed redundant locking" introduced
a bug in handling backlog.
In certain cases, when async request complete callback will
call complete() on -EINPROGRESS code, it will cause uncompleted requests.
It does not happen in implementation similar to crypto test manager,
but it will happen in implementation similar to dm-crypt.
Backlog needs to be checked before dequeuing next request.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

AES module was initialized for every DMA transaction.
That is redundant.
Now it is initialized once per request.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Key and IV should always be set before AES operation.
So no need to check if it has changed or not.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Previous version had not error handling.
Request could remain uncompleted.

Also in the case of DMA error, FLAGS_INIT is unset
and accelerator will be initialized again.

Buffer size allignment is checked.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Submitting request involved double locking for enqueuing and
dequeuing. Now it is done under the same lock.

FLAGS_BUSY is now handled under the same lock.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

DMA parameters for constant data were initialized during driver probe().
It seems that those settings sometimes are lost when devices goes to off mode.
This patch makes DMA initialization just before use.
It solves off mode problems.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If scatterlist have more than one entry, current driver uses
aligned buffer to copy data to to accelerator to tackle possible
issues with DMA and SHA buffer alignment.

This commit adds more intelligence to verify SG alignment and
possibility to use DMA directly on the data without using copy
buffer.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

bufcnt is 0 if it was no update requests before,
which is exact meaning of FLAGS_FIRST.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Hash-in-progress is now stored in hw format.
Only on final call, hash is converted to correct format.
Speedup copy procedure and will allow to use OMAP burst mode.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

According to the Herbert Xu, client may not always call
crypto_ahash_final().

In the case of error in hash calculation resources will be
automatically cleaned up.

But if no hash calculation error happens and client will not call
crypto_ahash_final() at all, then internal buffer will not be freed,
and clocks will not be disabled.

This patch provides support for atomic crypto_ahash_update() call.
Clocks are now enabled and disabled per update request.

Data buffer is now allocated as a part of request context.
Client is obligated to free it with crypto_free_ahash().
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Locking for queuing and dequeuing is combined.
test_and_set_bit() is also replaced with checking under dd->lock.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Introduces DMA error handling.

DMA error is returned as a result code of the hash request.
Clients needs to handle error codes and may repeat hash calculation attempt.

Also in the case of DMA error, SHAM module is set to be re-initialized again.
It significantly improves stability against possible HW failures.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

DMA parameters for constant data were initialized during driver probe().
It seems that those settings sometimes are lost when devices goes to off mode.
This patch makes DMA initialization just before use.
It solves off mode problems.

Fixes: NB#202786 - Aegis & SHA1 block off mode changes
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently driver storred digest results in req->results
provided by the client. But some clients do not set it
until final() call. It leads to crash.
Changed to use internal buffer to store temporary digest results.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The BKL was pushed into this function when it was converted to use the
unlocked_ioctl interface, but nothing that the function touches is
actually protected by the BKL.  So just remove the BKL entirely, so that
we finally can get a realistic system build without the BKL being
enabled at all.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Evergreen now has blit support, but unmappable vram support
was disabled in c919b371
(drm/radeon/kms: avoid corner case issue with unmappable vram V2)
due to merge ordering.  This re-enables unmappable vram on
evergreen.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Calculate height based on the slice bitfield rather than the size.
Same as Dave's CB fix.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

There are cases when multiple texture units have to be enabled,
but not actually used to sample.  This patch checks to see if
the lookup_disable bit is set and if so, skips the texture check.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=25544Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NZimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As each board and system has different memory for ramoops.  It's better to
define the platform data instead of module params.

[akpm@linux-foundation.org: fix ramoops_remove() return type]
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The search/pullup/add/remove device attributes were 0666 which would allow
arbitrary users to affect the 1 wire bus.  Change to 0664 to prevent that.

I found this patch in the Android tree, apparently this has never been
sent upstream so doing it now.
Signed-off-by: NBrian Swetland <swetland@google.com>
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace possibly damaging broadcast writes into the per-port SP_MODE
registers with individual writes for each port.  This will preserve
individual port configurations in case if ports are configured
differently.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace hardcoded maximum port number with actual reported number of
switch ports.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

RapidIO spec v.2.1 adds Idle Sequence 2 into LP-Serial Physical Layer.
The fix ensures that corresponding bits are not corrupted during error
handling.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Detects RIO link to the already enumerated device and properly sets links
between device objects.  Changes to the enumeration/discovery logic:

1. Use Master Enable bit to signal end of the enumeration - agents may
   start their discovery process as soon as they see this bit set
   (Component Tag register was used before for this purpose).

2. Enumerator sets Component Tag (!= 0) immediately during device
   setup.  This allows to identify the device if the redundant route
   exists in a RIO system.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the RIO switch driver and definitions for IDT CPS-1848 and CPS-1616
Gen2 devices.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add explicit device access check before performing device enumeration.
This gives a chance to clear possible link error conditions by issuing
safe maintenance read request(s).
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add check for access to port-write (PW) message source device before
processing the PW message.  If source RIO device is not available (power
down or RIO link failure) trace back to a last available switch/port on
the PW message route and service failure at that point.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

1. Change to create attribute "routes" only for switches.

2. Add a switch-specific callback to create/remove proprietary attributes.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The default error-stopped state handler provides recovery mechanism as
defined by RIO specification.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create back and forward links between RIO devices.  These links are
intended for use by error management and hot-plug extensions.  Links for
redundant RIO connections between switches are not set (will be fixed in a
separate patch).
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The switch port information is obtained and stored during RIO device
setup.  Therefore repeated reads from Switch Port Information CAR may be
removed.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This set of RapidIO patches extends support for standard error recovery
mechanism and adds new IDT Gen2 sRIO switch devices - CPS-1848 and
CPS-1616.  Implementation of the standard error-stopped state recovery
mechanism (as defined by the RapidIO specification) is required for the
new switches.

Version 2 of this set of patches addresses received comments and fixes an
error notification setup issue found in the idt_gen2.c after the first
version was released.

This patch:

Make RapidIO devices appear in /sys/devices/rapidio directory instead of
top of /sys/devices directory.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both mxser_disable_must_enchance_mode() and mxser_get_must_hardware_id()
called from function CheckIsMoxaMust(), when CONFIG_PCI=y.  So mark both
the functions under CONFIG_PCI.

We were warned by the following warning.

drivers/char/mxser.c:306: warning: `mxser_disable_must_enchance_mode' defined but not used
drivers/char/mxser.c:391: warning: `mxser_get_must_hardware_id'
defined but not used
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changed <module>-objs to <module>-y in Makefile.
Signed-off-by: NTracey Dent <tdent48227@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changed <module>-objs to <module>-y in Makefile.
Signed-off-by: NTracey Dent <tdent48227@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changed <module>-objs to <module>-y in Makefile and use
ccflags-y option.
Signed-off-by: NTracey Dent <tdent48227@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changed <module>-objs to <module>-y in Makefile.
Signed-off-by: NTracey Dent <tdent48227@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changed <module>-objs to <module>-y in Makefile.
Signed-off-by: NTracey Dent <tdent48227@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>