Commit 6ac3ce82 ("net: bcmgenet: Remove excessive PHY reset")
removed the bcmgenet_mii_reset() function from bcmgenet_power_up() and
bcmgenet_internal_phy_setup() functions.  In so doing it broke the reset
of the internal PHY devices used by the GENETv1-GENETv3 which required
this reset before the UniMAC was enabled.  It also broke the internal
GPHY devices used by the GENETv4 because the config_init that installed
the AFE workaround was no longer occurring after the reset of the GPHY
performed by bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup().
In addition the code in bcmgenet_internal_phy_setup() related to the
"enable APD" comment goes with the bcmgenet_mii_reset() so it should
have also been removed.

Commit bd4060a6 ("net: bcmgenet: Power on integrated GPHY in
bcmgenet_power_up()") moved the bcmgenet_phy_power_set() call to the
bcmgenet_power_up() function, but failed to remove it from the
bcmgenet_internal_phy_setup() function.  Had it done so, the
bcmgenet_internal_phy_setup() function would have been empty and could
have been removed at that time.

Commit 5dbebbb4 ("net: bcmgenet: Software reset EPHY after power on")
was submitted to correct the functional problems introduced by
commit 6ac3ce82 ("net: bcmgenet: Remove excessive PHY reset"). It
was included in v4.4 and made available on 4.3-stable. Unfortunately,
it didn't fully revert the commit because this bcmgenet_mii_reset()
doesn't apply the soft reset to the internal GPHY used by GENETv4 like
the previous one did. This prevents the restoration of the AFE work-
arounds for internal GPHY devices after the bcmgenet_phy_power_set() in
bcmgenet_internal_phy_setup().

This commit takes the alternate approach of removing the unnecessary
bcmgenet_internal_phy_setup() function which shouldn't have been in v4.3
so that when bcmgenet_mii_reset() was restored it should have only gone
into bcmgenet_power_up().  This will avoid the problems while also
removing the redundancy (and hopefully some of the confusion).

Fixes: 6ac3ce82 ("net: bcmgenet: Remove excessive PHY reset")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the case udp_sk(sk)->pending is AF_INET6, udpv6_sendmsg() would
jump to do_append_data, skipping the initialization of sockc.tsflags.
Fix the problem by moving sockc.tsflags initialization earlier.

The bug was detected with KMSAN.

Fixes: c14ac945 ("sock: enable timestamping using control messages")
Signed-off-by: NAlexander Potapenko <glider@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

YASUAKI ISHIMATSU says:

====================
fjes: Do not load fjes driver

The fjes driver is used only by FUJITSU servers and almost of all
servers in the world never use it. But currently if ACPI PNP0C02
is defined in the ACPI table, the following message is always shown:

 "FUJITSU Extended Socket Network Device Driver - version 1.2
  - Copyright (c) 2015 FUJITSU LIMITED"

The message makes users confused because there is no reason that
the message is shown in other vendor servers.

To avoid the confusion, the patch adds several checks.

v3:
  - Rebase on latest net tree.
  - Add _STA method check to avoid loading fjes driver.

v2:
  - Order local variable declarations from longest to shortest line
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The extended device socket cannot turn on/off while system is running.
So when system boots up and the device is not power on, the fjes driver
does not need be loaded.

To check the status of the device, the patch adds ACPI _STA method check.
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
CC: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The fjes driver is used only by FUJITSU servers and almost of all
servers in the world never use it. But currently if ACPI PNP0C02
is defined in the ACPI table, the following message is always shown:

 "FUJITSU Extended Socket Network Device Driver - version 1.2
  - Copyright (c) 2015 FUJITSU LIMITED"

The message makes users confused because there is no reason that
the message is shown in other vendor servers.

To avoid the confusion, the patch adds a check that the server
has a extended socket device or not.
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
CC: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox mlx5 fixes 2017-03-21

This series contains some mlx5 core and ethernet driver fixes.

For -stable:
net/mlx5e: Count LRO packets correctly (for kernel >= 4.2)
net/mlx5e: Count GSO packets correctly (for kernel >= 4.2)
net/mlx5: Increase number of max QPs in default profile (for kernel >= 4.0)
net/mlx5e: Avoid supporting udp tunnel port ndo for VF reps (for kernel >= 4.10)
net/mlx5e: Use the proper UAPI values when offloading TC vlan actions (for kernel >= v4.9)
net/mlx5: E-Switch, Don't allow changing inline mode when flows are configured (for kernel >= 4.10)
net/mlx5e: Change the TC offload rule add/del code path to be per NIC or E-Switch (for kernel >= 4.10)
net/mlx5: Add missing entries for set/query rate limit commands (for kernel >= 4.8)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RX packets statistics ('rx_packets' counter) used to count LRO packets
as one, even though it contains multiple segments.
This patch will increment the counter by the number of segments, and
align the driver with the behavior of other drivers in the stack.

Note that no information is lost in this patch due to 'rx_lro_packets'
counter existence.

Before, ethtool showed:
$ ethtool -S ens6 | egrep "rx_packets|rx_lro_packets"
     rx_packets: 435277
     rx_lro_packets: 35847
     rx_packets_phy: 1935066

Now, we will see the more logical statistics:
$ ethtool -S ens6 | egrep "rx_packets|rx_lro_packets"
     rx_packets: 1935066
     rx_lro_packets: 35847
     rx_packets_phy: 1935066

Fixes: e586b3b0 ("net/mlx5: Ethernet Datapath files")
Signed-off-by: NGal Pressman <galp@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TX packets statistics ('tx_packets' counter) used to count GSO packets
as one, even though it contains multiple segments.
This patch will increment the counter by the number of segments, and
align the driver with the behavior of other drivers in the stack.

Note that no information is lost in this patch due to 'tx_tso_packets'
counter existence.

Before, ethtool showed:
$ ethtool -S ens6 | egrep "tx_packets|tx_tso_packets"
     tx_packets: 61340
     tx_tso_packets: 60954
     tx_packets_phy: 2451115

Now, we will see the more logical statistics:
$ ethtool -S ens6 | egrep "tx_packets|tx_tso_packets"
     tx_packets: 2451115
     tx_tso_packets: 60954
     tx_packets_phy: 2451115

Fixes: e586b3b0 ("net/mlx5: Ethernet Datapath files")
Signed-off-by: NGal Pressman <galp@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With ConnectX-4 sharing SRQs from the same space as QPs, we hit a
limit preventing some applications to allocate needed QPs amount.
Double the size to 256K.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This was added to allow the TC offloading code to identify offloading
encap/decap vxlan rules.

The VF reps are effectively related to the same mlx5 PCI device as the
PF. Since the kernel invokes the (say) delete ndo for each netdev, the
FW erred on multiple vxlan dst port deletes when the port was deleted
from the system.

We fix that by keeping the registration to be carried out only by the
PF. Since the PF serves as the uplink device, the VF reps will look
up a port there and realize if they are ok to offload that.

Tested:
 <SETUP VFS>
 <SETUP switchdev mode to have representors>
 ip link add vxlan1 type vxlan id 44 dev ens5f0 dstport 9999
 ip link set vxlan1 up
 ip link del dev vxlan1

Fixes: 4a25730e ('net/mlx5e: Add ndo_udp_tunnel_add to VF representors')
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we use the non UAPI values and we miss erring on
the modify action which is not supported, fix that.

Fixes: 8b32580d ('net/mlx5e: Add TC vlan action for SRIOV offloads')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reported-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changing the eswitch inline mode can potentially cause already configured
flows not to match the policy. E.g. set policy L4, add some L4 rules,
set policy to L2 --> bad! Hence we disallow it.

Keep track of how many offloaded rules are now set and refuse
inline mode changes if this isn't zero.

Fixes: bffaa916 ("net/mlx5: E-Switch, Add control for inline mode")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor the code to deal with add/del TC rules to have handler per NIC/E-switch
offloading use case, and push the latter into the e-switch code. This provides
better separation and is to be used in down-stream patch for applying a fix.

Fixes: bffaa916 ("net/mlx5: E-Switch, Add control for inline mode")
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The switch cases for the rate limit set and query commands were
missing, which could get us wrong under fw error or driver reset
flow, fix that.

Fixes: 1466cc5b ('net/mlx5: Rate limit tables support')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2017-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.11

iwlwifi

* fix a user reported warning in DQA

mwifiex

* fix a potential double free
* fix lost early debug logs
* fix init wakeup warning message from device framework
* add Ganapathi and Xinming as maintainers

ath10k

* fix regression with QCA6174 during resume and firmware crash
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, tipc_nametbl_unsubscribe() is called at subscriptions
reference count cleanup. Usually the subscriptions cleanup is
called at subscription timeout or at subscription cancel or at
subscriber delete.

We have ignored the possibility of this being called from other
locations, which causes deadlock as we try to grab the
tn->nametbl_lock while holding it already.

   CPU1:                             CPU2:
----------                     ----------------
tipc_nametbl_publish
spin_lock_bh(&tn->nametbl_lock)
tipc_nametbl_insert_publ
tipc_nameseq_insert_publ
tipc_subscrp_report_overlap
tipc_subscrp_get
tipc_subscrp_send_event
                             tipc_close_conn
                             tipc_subscrb_release_cb
                             tipc_subscrb_delete
                             tipc_subscrp_put
tipc_subscrp_put
tipc_subscrp_kref_release
tipc_nametbl_unsubscribe
spin_lock_bh(&tn->nametbl_lock)
<<grab nametbl_lock again>>

   CPU1:                              CPU2:
----------                     ----------------
tipc_nametbl_stop
spin_lock_bh(&tn->nametbl_lock)
tipc_purge_publications
tipc_nameseq_remove_publ
tipc_subscrp_report_overlap
tipc_subscrp_get
tipc_subscrp_send_event
                             tipc_close_conn
                             tipc_subscrb_release_cb
                             tipc_subscrb_delete
                             tipc_subscrp_put
tipc_subscrp_put
tipc_subscrp_kref_release
tipc_nametbl_unsubscribe
spin_lock_bh(&tn->nametbl_lock)
<<grab nametbl_lock again>>

In this commit, we advance the calling of tipc_nametbl_unsubscribe()
from the refcount cleanup to the intended callers.

Fixes: d094c4d5 ("tipc: add subscription refcount to avoid invalid delete")
Reported-by: NJohn Thompson <thompa.atl@gmail.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to remove the unnecessary temporary variable 'err' from
sctp_association_init.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sctp_stream_free uses struct sctp_stream as a param, but struct sctp_stream
is defined after it's declaration.

This patch is to declare struct sctp_stream before sctp_stream_free.

Fixes: a8386317 ("sctp: prepare asoc stream for stream reconf")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With posix timers having become optional, we get a build error with
the cpts time sync option of the CPSW driver:

drivers/net/ethernet/ti/cpts.c: In function 'cpts_find_ts':
drivers/net/ethernet/ti/cpts.c:291:23: error: implicit declaration of function 'ptp_classify_raw';did you mean 'ptp_classifier_init'? [-Werror=implicit-function-declaration]

This adds a hard dependency on PTP_CLOCK to avoid the problem, as
building it without PTP support makes no sense anyway.

Fixes: baa73d9e ("posix-timers: Make them configurable")
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dependency is reversed: cpsw and netcp call into cpts,
but cpts depends on the other two in Kconfig. This can lead
to cpts being a loadable module and its callers built-in:

drivers/net/ethernet/ti/cpsw.o: In function `cpsw_remove':
cpsw.c:(.text.cpsw_remove+0xd0): undefined reference to `cpts_release'
drivers/net/ethernet/ti/cpsw.o: In function `cpsw_rx_handler':
cpsw.c:(.text.cpsw_rx_handler+0x2dc): undefined reference to `cpts_rx_timestamp'
drivers/net/ethernet/ti/cpsw.o: In function `cpsw_tx_handler':
cpsw.c:(.text.cpsw_tx_handler+0x7c): undefined reference to `cpts_tx_timestamp'
drivers/net/ethernet/ti/cpsw.o: In function `cpsw_ndo_stop':

As a workaround, I'm introducing another Kconfig symbol to
control the compilation of cpts, while making the actual
module controlled by a silent symbol that is =y when necessary.

Fixes: 6246168b ("net: ethernet: ti: netcp: add support of cpts")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: fix the rx settings of RTL8153

The RMS and the rx early size should base on the same rx size. However,
the RMS is set to 9K bytes now and the rx early depends on mtu. For using
the rx buffer effectively, sync the two settings according to the mtu.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

revert commit a59e6d81 ("r8152: correct the rx early size") and
fix the rx early size as

	(rx buffer size - rx packet size - rx desc size - alignment) / 4
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the received maximum size (RMS) according to the mtu size. It is
unnecessary to receive a packet which is more than the size we could
transmit. Besides, this could let the rx buffer be used effectively.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The net_cls controller controls the classid field of each socket which
is associated with the cgroup.  Because the classid is per-socket
attribute, when a task migrates to another cgroup or the configured
classid of the cgroup changes, the controller needs to walk all
sockets and update the classid value, which was implemented by
3b13758f ("cgroups: Allow dynamically changing net_classid").

While the approach is not scalable, migrating tasks which have a lot
of fds attached to them is rare and the cost is born by the ones
initiating the operations.  However, for simplicity, both the
migration and classid config change paths call update_classid() which
scans all fds of all tasks in the target css.  This is an overkill for
the migration path which only needs to cover a much smaller subset of
tasks which are actually getting migrated in.

On cgroup v1, this can lead to unexpected scalability issues when one
tries to migrate a task or process into a net_cls cgroup which already
contains a lot of fds.  Even if the migration traget doesn't have many
to get scanned, update_classid() ends up scanning all fds in the
target cgroup which can be extremely numerous.

Unfortunately, on cgroup v2 which doesn't use net_cls, the problem is
even worse.  Before bfc2cf6f ("cgroup: call subsys->*attach() only
for subsystems which are actually affected by migration"), cgroup core
would call the ->css_attach callback even for controllers which don't
see actual migration to a different css.

As net_cls is always disabled but still mounted on cgroup v2, whenever
a process is migrated on the cgroup v2 hierarchy, net_cls sees
identity migration from root to root and cgroup core used to call
->css_attach callback for those.  The net_cls ->css_attach ends up
calling update_classid() on the root net_cls css to which all
processes on the system belong to as the controller isn't used.  This
makes any cgroup v2 migration O(total_number_of_fds_on_the_system)
which is horrible and easily leads to noticeable stalls triggering RCU
stall warnings and so on.

The worst symptom is already fixed in upstream by bfc2cf6f
("cgroup: call subsys->*attach() only for subsystems which are
actually affected by migration"); however, backporting that commit is
too invasive and we want to avoid other cases too.

This patch updates net_cls's cgrp_attach() to iterate fds of only the
processes which are actually getting migrated.  This removes the
surprising migration cost which is dependent on the total number of
fds in the target cgroup.  As this leaves write_classid() the only
user of update_classid(), open-code the helper into write_classid().
Reported-by: NDavid Goode <dgoode@fb.com>
Fixes: 3b13758f ("cgroups: Allow dynamically changing net_classid")
Cc: stable@vger.kernel.org # v4.4+
Cc: Nina Schiff <ninasc@fb.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This gets qmicli working with the MDM6600 modem.

Cc: Bjørn Mork <bjorn@mork.no>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Tested-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge of 'linux-kselftest-4.11-rc1':

1. Partially removed use of 'test_objs' target, breaking force rebuild of
BPFOBJ, introduced in commit d498f871 ("bpf: Rebuild bpf.o for any
dependency update").

  Update target so dependency on BPFOBJ is restored.

2. Introduced commit 2047f1d8 ("selftests: Fix the .c linking rule")
which fixes order of LDLIBS.

  Commit d02d8986 ("bpf: Always test unprivileged programs") added
libcap dependency into CFLAGS. Use LDLIBS instead to fix linking of
test_verifier.

3. Introduced commit d83c3ba0 ("selftests: Fix selftests build to
just build, not run tests").

  Reordering the Makefile allows us to remove the 'all' target.

Tested both:
    selftests/bpf$ make
and
    selftests$ make TARGETS=bpf
on Ubuntu 16.04.2.
Signed-off-by: NZi Shen Lim <zlim.lnx@gmail.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Tested-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Tested-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SOF_TIMESTAMPING_OPT_STATS can be enabled and disabled
while packets are collected on the error queue.
So, checking SOF_TIMESTAMPING_OPT_STATS in sk->sk_tsflags
is not enough to safely assume that the skb contains
OPT_STATS data.

Add a bit in sock_exterr_skb to indicate whether the
skb contains opt_stats data.

Fixes: 1c885808 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING")
Reported-by: NJongHwan Kim <zzoru007@gmail.com>
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__sock_recv_timestamp can be called for both normal skbs (for
receive timestamps) and for skbs on the error queue (for transmit
timestamps).

Commit 1c885808
(tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING)
assumes any skb passed to __sock_recv_timestamp are from
the error queue, containing OPT_STATS in the content of the skb.
This results in accessing invalid memory or generating junk
data.

To fix this, set skb->pkt_type to PACKET_OUTGOING for packets
on the error queue. This is safe because on the receive path
on local sockets skb->pkt_type is never set to PACKET_OUTGOING.
With that, copy OPT_STATS from a packet, only if its pkt_type
is PACKET_OUTGOING.

Fixes: 1c885808 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING")
Reported-by: NJongHwan Kim <zzoru007@gmail.com>
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to fix the issue that sctp_prsctp_prune_sent forgot
to update q->out_qlen when removing a chunk from unsent queue.

Fixes: 8dbdf1f5 ("sctp: implement prsctp PRIO policy")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As tp->dst_pending_confirm's value can only be set 0 or 1, this
patch is to change to define it as a bit instead of __u32.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit c86a773c ("sctp: add dst_pending_confirm flag") introduced
a temporary variable "confirm" in sctp_packet_transmit.

But it broke the rule that longer lines should be above shorter ones.
Besides, this variable is not necessary, so this patch is to just
remove it and use tp->dst_pending_confirm directly.

Fixes: c86a773c ("sctp: add dst_pending_confirm flag")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The VRF driver takes a reference to the inet6_dev on the VRF device for
its rt6_local dst when handling local traffic through the VRF device as
a loopback. When the device is deleted the driver does a put on the idev
but does not reset rt6i_idev in the rt6_info struct. When the dst is
destroyed, dst_destroy calls ip6_dst_destroy which does a second put for
what is essentially the same reference causing it to be prematurely freed.
Reset rt6i_idev after the put in the vrf driver.

Fixes: b4869aa2 ("net: vrf: ipv6 support for local traffic to
                       local addresses")
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We could allocate less memory than intended because we do:

	bnad->regdata = kzalloc(len << 2, GFP_KERNEL);

The shift can overflow leading to a crash.  This is debugfs code so the
impact is very small.

Fixes: 7afc5dbd ("bna: Add debugfs interface.")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NRasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a Dell branded Sierra Wireless EM7455. It is operating in
MBIM mode by default, but can be configured to provide two QMI/RMNET
functions.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_cow(skb, sizeof(ip header)) is not very helpful in this context.

First we need to use pskb_may_pull() to make sure the ip header
is in skb linear part, then use skb_try_make_writable() to
address clones issues.

Fixes: 4c30719f ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added missing logic in tun driver, which prevents apps to set
offloads using tun ioctl, if offloads were previously disabled via ethtool
Signed-off-by: NYaroslav Isakov <yaroslav.isakov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dmitry has reported that a BUG_ON() condition in unix_notinflight()
may be triggered by a simple code that forwards unix socket in an
SCM_RIGHTS message.
That is caused by incorrect unix socket GC implementation in unix_gc().

The GC first collects list of candidates, then (a) decrements their
"children's" inflight counter, (b) checks which inflight counters are
now 0, and then (c) increments all inflight counters back.
(a) and (c) are done by calling scan_children() with inc_inflight or
dec_inflight as the second argument.

Commit 6209344f ("net: unix: fix inflight counting bug in garbage
collector") changed scan_children() such that it no longer considers
sockets that do not have UNIX_GC_CANDIDATE flag. It also added a block
of code that that unsets this flag _before_ invoking
scan_children(, dec_iflight, ). This may lead to incorrect inflight
counters for some sockets.

This change fixes this bug by changing order of operations:
UNIX_GC_CANDIDATE is now unset only after all inflight counters are
restored to the original state.

  kernel BUG at net/unix/garbage.c:149!
  RIP: 0010:[<ffffffff8717ebf4>]  [<ffffffff8717ebf4>]
  unix_notinflight+0x3b4/0x490 net/unix/garbage.c:149
  Call Trace:
   [<ffffffff8716cfbf>] unix_detach_fds.isra.19+0xff/0x170 net/unix/af_unix.c:1487
   [<ffffffff8716f6a9>] unix_destruct_scm+0xf9/0x210 net/unix/af_unix.c:1496
   [<ffffffff86a90a01>] skb_release_head_state+0x101/0x200 net/core/skbuff.c:655
   [<ffffffff86a9808a>] skb_release_all+0x1a/0x60 net/core/skbuff.c:668
   [<ffffffff86a980ea>] __kfree_skb+0x1a/0x30 net/core/skbuff.c:684
   [<ffffffff86a98284>] kfree_skb+0x184/0x570 net/core/skbuff.c:705
   [<ffffffff871789d5>] unix_release_sock+0x5b5/0xbd0 net/unix/af_unix.c:559
   [<ffffffff87179039>] unix_release+0x49/0x90 net/unix/af_unix.c:836
   [<ffffffff86a694b2>] sock_release+0x92/0x1f0 net/socket.c:570
   [<ffffffff86a6962b>] sock_close+0x1b/0x20 net/socket.c:1017
   [<ffffffff81a76b8e>] __fput+0x34e/0x910 fs/file_table.c:208
   [<ffffffff81a771da>] ____fput+0x1a/0x20 fs/file_table.c:244
   [<ffffffff81483ab0>] task_work_run+0x1a0/0x280 kernel/task_work.c:116
   [<     inline     >] exit_task_work include/linux/task_work.h:21
   [<ffffffff8141287a>] do_exit+0x183a/0x2640 kernel/exit.c:828
   [<ffffffff8141383e>] do_group_exit+0x14e/0x420 kernel/exit.c:931
   [<ffffffff814429d3>] get_signal+0x663/0x1880 kernel/signal.c:2307
   [<ffffffff81239b45>] do_signal+0xc5/0x2190 arch/x86/kernel/signal.c:807
   [<ffffffff8100666a>] exit_to_usermode_loop+0x1ea/0x2d0
  arch/x86/entry/common.c:156
   [<     inline     >] prepare_exit_to_usermode arch/x86/entry/common.c:190
   [<ffffffff81009693>] syscall_return_slowpath+0x4d3/0x570
  arch/x86/entry/common.c:259
   [<ffffffff881478e6>] entry_SYSCALL_64_fastpath+0xc4/0xc6

Link: https://lkml.org/lkml/2017/3/6/252Signed-off-by: NAndrey Ulanov <andreyu@google.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Fixes: 6209344f ("net: unix: fix inflight counting bug in garbage collector")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Peng Tao says:

====================
vsock: cancel connect packets when failing to connect

Currently, if a connect call fails on a signal or timeout (e.g., guest is still
in the process of starting up), we'll just return to caller and leave the connect
packet queued and they are sent even though the connection is considered a failure,
which can confuse applications with unwanted false connect attempt.

The patchset enables vsock (both host and guest) to cancel queued packets when
a connect attempt is considered to fail.

v5 changelog:
  - change virtio_vsock_pkt->cancel_token back to virtio_vsock_pkt->vsk
v4 changelog:
  - drop two unnecessary void * cast
  - update new callback comment
v3 changelog:
  - define cancel_pkt callback in struct vsock_transport rather than struct virtio_transport
  - rename virtio_vsock_pkt->vsk to virtio_vsock_pkt->cancel_token
v2 changelog:
  - fix queued_replies counting and resume tx/rx when necessary
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise we'll leave the packets queued until releasing vsock device.
E.g., if guest is slow to start up, resulting ETIMEDOUT on connect, guest
will get the connect requests from failed host sockets.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NPeng Tao <bergwolf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NPeng Tao <bergwolf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>