The commit dba9b7b6 ("ALSA: hda - Fix doubly initialization of
i915 component") contained a typo that leads to the unbalance of i915
module reference.  The value to be checked is not chip->driver_type
but chip->driver_caps.

Fixes: dba9b7b6 ("ALSA: hda - Fix doubly initialization of i915 component")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196219Reported-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the commit fcc88d91 ("ALSA: hda - Bind with i915 component
before codec binding"), the binding with i915 audio component is moved
to be performed always at probing the controller.  This fixed the
potential problems on IVB, but now it brought another issue on HSW and
BDW.  These two platforms give two individual HD-audio controllers,
one for the analog codec on PCH and another for HDMI over gfx.  Since
I decided to take a lazy path to check only AZX_DRIVER_PCH type in the
commit above, now both controllers try to bind with i915, and you see
a kernel WARNING.

This patch tries to address it again properly.  Now a new DCAPS bit,
AZX_DCAPS_I915_COMPONENT, is introduced for indicating the binding
with i915 component in addition to the existing I915_POWERWELL bit
flag.  Each PCI entry has to give this new flag if it requires the
binding with i915 component.  For HSW/BDW PCH (i.e. the ones defined
by AZX_DCAPS_INTEL_PCH) doesn't contain AZX_DCAPS_I915_COMPONENT bit
while others have it.

While we're at it, add parentheses around the bit flag check for
avoiding possible compiler warnings, too.

The bug was spotted by Intel CI tests.

Fixes: fcc88d91 ("ALSA: hda - Bind with i915 component before codec binding")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196219Reported-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We used a on-demand i915 component binding for IvyBridge and
SandyBridge HDMI codecs, but it has a potential problem of the nested
module loading.  For avoiding that situation, assure the i915 binding
happening at the controller driver level for PCH controller devices,
where the initialization is performed in a detached work, instead of
calling from the codec driver probe.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We checked the quirks specific to the recent Intel chips by checking
the PCI IDs manually, but it's becoming messy with lots of IS_SKL()
and other macros, as the amount accumulated.

For simplification, here the new AZX_DRIVER_SKL type is introduced,
and check chip->driver_type instead of the manual PCI ID.  The short
name for this is still "HDA Intel PCH", so that it doesn't break the
existing user-space unnecessarily.
Suggested-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Broxton-T was a forgotten child and we didn't apply the quirks for
Skylake+ properly.  Meanwhile, a quirk for reducing the DMA latency
seems specific to the early Broxton model, so we leave as is.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Coffelake is another Intel part, so need to add PCI ID for it.
Signed-off-by: NMegha Dey <megha.dey@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

set_memory_* functions have moved to set_memory.h.  Switch to this
explicitly.

Link: http://lkml.kernel.org/r/1488920133-27229-14-git-send-email-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Geminilake is Skylake family platform. So add it's id to skl_plus check.

Fixes: 126cfa2f ("ALSA: hda: Add Geminilake HDMI codec ID")
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Cc: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On some Intel platforms, the audio clock may not be set correctly
with initial setting. This will cause the audio playback/capture
rates wrong.

This patch checks the audio clock setting and will set it to a
proper value if it is set incorrectly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188411Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Apply the same methods to obtain the current stream position as ASoC
Intel SKL driver uses.  It reads the position from DPIB for a playback
stream while it still reads from the position buffer for a capture
stream.  For a capture stream, some ugly workaround is needed to
settle down the inconsistent position.
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

They may be used by both legacy and ASoC drivers.
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Geminilake is another Intel part, so need to add PCI ID for it.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It seems that newer Intel chipsets have more than 15 I/O streams (total).
This patch forces the separate stream tags, when this hardware is detected
to avoid SDxCTL.STRM field overflow and an unexpected behaviour.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Like for Sunrise Point, the total stream number of Lewisburg's
input and output stream exceeds 15 (GCAP is 0x9701), which will
cause some streams do not work because of the overflow on
SDxCTL.STRM field if using the legacy stream tag allocation method.

Fixes: 5cf92c8b ("ALSA: hda - Add Intel Lewisburg device IDs Audio")
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HD-audio driver has a mechanism to fall back to the single cmd mode as
a last resort if the CORB/RIRB communication goes wrong even after
switching to the polling mode.  The switching has worked in the past
well, but Enrico Mioso reported that his system crashes when this
happens.

Although the actual cause of the crash isn't still fully analyzed yet,
it'd be in anyway good to provide an option to turn off the fallback
mode.  Now this patch extends the behavior of the existing single_cmd
option for that.  Namely,

- The option is changed from bool to bint.
- As default, it is the mode allowing the fallback to single cmd.
- Once when either true/false value is given to the option, the driver
  explicitly turns on/off the single cmd mode, but without the
  fallback.

That is, if you want to disable the fallback, just pass single_cmd=0
option.  Passing single_cmd=1 will keep working like before.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Imre Deak reported a deadlock of HD-audio driver at unbinding while
it's still in probing.  Since we probe the codecs asynchronously in a
work, the codec driver probe may still be kicked off while the
controller itself is being unbound.  And, azx_remove() tries to
process all pending tasks via cancel_work_sync() for fixing the other
races (see commit [0b8c8219: ALSA: hda - Cancel probe work instead
of flush at remove]), now we may meet a bizarre deadlock:

Unbind snd_hda_intel via sysfs:
  device_release_driver() ->
    device_lock(snd_hda_intel) ->
      azx_remove() ->
        cancel_work_sync(azx_probe_work)

azx_probe_work():
  codec driver probe() ->
     __driver_attach() ->
       device_lock(snd_hda_intel)

This deadlock is caused by the fact that both device_release_driver()
and driver_probe_device() take both the device and its parent locks at
the same time.  The codec device sets the controller device as its
parent, and this lock is taken before the probe() callback is called,
while the controller remove() callback gets called also with the same
lock.

In this patch, as an ugly workaround, we unlock the controller device
temporarily during cancel_work_sync() call.  The race against another
bind call should be still suppressed by the parent's device lock.
Reported-by: NImre Deak <imre.deak@intel.com>
Fixes: 0b8c8219 ("ALSA: hda - Cancel probe work instead of flush at remove")
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit 49d9e77e ("ALSA: hda - Fix system panic when DMA > 40 bits
for Nvidia audio controllers") simply disabled any DMA exceeding 32
bits for NVidia devices, even though they are capable of performing
DMA up to 40 bits. On some architectures (such as arm64), system memory
is not guaranteed to be 32-bit addressable by PCI devices, and so this
change prevents NVidia devices from working on platforms such as AMD
Seattle.

Since the original commit already mentioned that up to 40 bits of DMA
is supported, and given that the code has been updated in the meantime
to support a 40 bit DMA mask on other devices, revert commit 49d9e77e
and explicitly set the DMA mask to 40 bits for NVidia devices.

Fixes: 49d9e77e ('ALSA: hda - Fix system panic when DMA > 40 bits...')
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For SKL and later Intel chips, we control the power well per codec
basis via link_power callback since the commit [03b135ce: ALSA:
hda - remove dependency on i915 power well for SKL].
However, there are a few exceptional cases where the gfx registers are
accessed from the audio driver: namely the wakeup override bit
toggling at (both system and runtime) resume.  This seems causing a
kernel warning when accessed during the power well down (and likely
resulting in the bogus register accesses).

This patch puts the proper power up / down sequence around the resume
code so that the wakeup bit is fiddled properly while the power is
up.  (The other callback, sync_audio_rate, is used only in the PCM
callback, so it's guaranteed in the power-on.)

Also, by this proper power up/down, the instantaneous flip of wakeup
bit in the resume callback that was introduced by the commit
[033ea349: ALSA: hda - Fix Skylake codec timeout] becomes
superfluous, as snd_hdac_display_power() already does it.  So we can
clean it up together.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214
Fixes: 03b135ce ('ALSA: hda - remove dependency on i915 power well for SKL')
Cc: <stable@vger.kernel.org> # v4.2+
Tested-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Skylake onwards HDA controller supports new capabilities like
Global Time Stamping (GTS) capability. So add support to parse
these new capabilities.
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NHardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This commit fixes garbled audio on Bonaire HDMI
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This allows the device to correctly show up as ATI HDMI
rather than a generic one and allows the driver to use
the available caps.
Signed-off-by: NAwais Belal <awais_belal@mentor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

register_vga_switcheroo() sets the PM ops from the hda structure which
is freed later in azx_free. Make sure that these ops are cleared.

Caught by KASAN, initially noticed due to a general protection fault.

Fixes: 246efa4a ("snd/hda: add runtime suspend/resume on optimus support (v4)")
Signed-off-by: NPeter Wu <peter@lekensteyn.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Kabylake-H shows up as PCI ID 0xa2f0. We missed adding this
earlier with other KBL IDs.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Kabylake shows up as PCI ID 0xa171. And Kabylake-LP as 0x9d71.
Since these are similar to Skylake add these to SKL_PLUS macro
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent bug report suggests that BCLK setup for i915 HSW/BDW needs
to be updated at each HDMI hotplug, not only at initialization and
resume.  That is, we need to update HSW_EM4 and HSW_EM5 registers at
ELD notification, too.  Otherwise the HDMI audio may be out of sync
and played in a wrong pitch.

However, the HDA codec driver has no access to the controller
registers, and currently the code managing these registers is in
hda_intel.c, i.e. local to the controller driver.  For allowing the
explicit BCLK update from the codec driver, as in this patch, the
former haswell_set_bclk() in hda_intel.c is moved to hdac_i915.c and
exposed as snd_hdac_i915_set_bclk().  This is called from both the HDA
controller driver and intel_pin_eld_notify() in HDMI codec driver.

Along with this change, snd_hdac_get_display_clk() gets dropped as
it's no longer used.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91410
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add HD Audio Device PCI ID for the Intel Broxton-T platform.
It is an HDA Intel PCH controller.
Signed-off-by: NLu, Han <han.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This commit fixes garbled audio on Polaris-10/11 variants
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

azx_probe_continue() uses pm_runtime_put_noidle() to drop the rpm
usage_count, which means that if it's the last reference the
autosuspend of the controller won't actually happen. So if the codecs
autosuspend before the azx_probe_continue() drops the last
reference we'll fail to autosuspend the controller. This does happen
in practice, but not every time. As can be seen in [1] the controller
autosuspend attempt fails due to the usage_count when suspending the
codecs. A bit later we see the the contoller usage_count dropping to
zero without further attempts at autosuspend.

Fix the problem by using pm_runtime_put_autosuspend() instead, which
will kick off the autosuspend of the controller even if the codecs
are already asleep. As can be seen in [2] the controller autosuspend
still fails while suspending the codecs, but later on we see another
autosuspend attempt after dropping the usage_count to 0.

I was also a bit worried that there might still be a race between the
controller autosuspend and the rest of the code in azx_probe_continue().
So I also tried replacing the the put_noidle() with put_sync_suspend().
No explosions occurred, so I'm somewhat satisfied that there are no
serious problems in this area.

[1]
 kworker/1:2-122   [001] ....    63.661310: __pm_runtime_suspend: hdaudioC0D0 usage_count 0
 kworker/1:2-122   [001] d..2    63.661316: rpm_suspend: hdaudioC0D0 flags-d cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:2-122   [001] d..1    63.661317: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/1:2-122   [001] d..2    63.661332: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/1:1-72    [001] d..2    63.661543: rpm_suspend: hdaudioC0D0 flags-a cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:1-72    [001] d..1    63.661544: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/1:1-72    [001] ....    63.661545: hda_codec_runtime_suspend: hdaudioC0D0 suspend
 kworker/1:1-72    [001] d..2    63.661614: rpm_idle: 0000:00:03.0 flags-1 cnt-1  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:1-72    [001] d..1    63.661615: rpm_check_suspend_allowed: 0000:00:03.0 usage_count 1
 kworker/1:1-72    [001] d..1    63.661615: rpm_check_suspend_allowed: 0000:00:03.0 retval -11
 kworker/1:1-72    [001] d..2    63.661616: rpm_return_int: rpm_idle+0x249/0x487:0000:00:03.0 ret=-11
 kworker/1:1-72    [001] d..2    63.661616: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/1:2-122   [001] d..2    63.664834: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:2-122   [001] d..1    63.664835: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/1:2-122   [001] d..2    63.664836: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/1:2-122   [001] d..2    63.664841: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:2-122   [001] d..1    63.664841: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/1:2-122   [001] d..2    63.664841: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/1:2-122   [001] ....    63.664842: azx_probe_continue: 0000:00:03.0 usage_count=0

[2]
 kworker/0:0-4     [000] ....    50.354567: __pm_runtime_suspend: hdaudioC0D0 usage_count 0
 kworker/0:0-4     [000] d..2    50.354574: rpm_suspend: hdaudioC0D0 flags-d cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.354575: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/0:0-4     [000] d..2    50.354589: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/0:2-135   [000] d..2    50.354809: rpm_suspend: hdaudioC0D0 flags-a cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:2-135   [000] d..1    50.354810: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/0:2-135   [000] ....    50.354816: hda_codec_runtime_suspend: hdaudioC0D0 suspend
 kworker/0:2-135   [000] d..2    50.354908: rpm_idle: 0000:00:03.0 flags-1 cnt-1  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:2-135   [000] d..1    50.354909: rpm_check_suspend_allowed: 0000:00:03.0 usage_count 1
 kworker/0:2-135   [000] d..1    50.354909: rpm_check_suspend_allowed: 0000:00:03.0 retval -11
 kworker/0:2-135   [000] d..2    50.354909: rpm_return_int: rpm_idle+0x249/0x487:0000:00:03.0 ret=-11
 kworker/0:2-135   [000] d..2    50.354910: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/0:0-4     [000] d..2    50.373791: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.373792: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/0:0-4     [000] d..2    50.373793: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/0:0-4     [000] d..2    50.373797: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.373798: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/0:0-4     [000] d..2    50.373798: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/0:0-4     [000] ....    50.373799: __pm_runtime_suspend: 0000:00:03.0 usage_count 0
 kworker/0:0-4     [000] d..2    50.373800: rpm_suspend: 0000:00:03.0 flags-d cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.373800: rpm_check_suspend_allowed: 0000:00:03.0 retval 0
 kworker/0:0-4     [000] d..2    50.373803: rpm_return_int: rpm_suspend+0x406/0x5e8:0000:00:03.0 ret=0
 kworker/0:0-4     [000] d..2    50.385164: rpm_suspend: 0000:00:03.0 flags-a cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.385165: rpm_check_suspend_allowed: 0000:00:03.0 retval 0
 kworker/0:0-4     [000] ....    50.385174: azx_runtime_suspend: 0000:00:03.0 azx suspend releaseing power well
 kworker/0:0-4     [000] ....    50.385179: azx_runtime_suspend: 0000:00:03.0 azx suspend
 kworker/0:0-4     [000] d..2    50.386872: rpm_return_int: rpm_suspend+0x406/0x5e8:0000:00:03.0 ret=0
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some Skylake machines show the codec probe errors in certain
situations, e.g. HP Z240 desktop fails to probe the onboard Realtek
codec at reloading the snd-hda-intel module like:
  snd_hda_intel 0000:00:1f.3: spurious response 0x200:0x2, last cmd=0x000000
  snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: lastcmd=0x000f0000
  snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x000f0000
  snd_hda_intel 0000:00:1f.3: Codec #0 probe error; disabling it...
  hdaudio hdaudioC0D2: no AFG or MFG node found
  snd_hda_intel 0000:00:1f.3: no codecs initialized

Also, HP G470 G3 suffers from the similar problem, as reported in
bugzilla below.  On this machine, the codec probe error appears even
at a fresh boot.

As Libin suggested, the same workaround used for Broxton in the commit
[6639484d: ALSA: hda - disable dynamic clock gating on Broxton
 before reset] can be applied for Skylake in order to fix this problem.
The Intel HW team also confirmed that this is needed for SKL.

This patch makes the workaround applied to both SKL and BXT
platforms.  The referred macros are moved and one superfluous macro
(IS_BROXTON()) is another one (IS_BXT()) as well.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112731Suggested-by: NLibin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit [991f86d7: ALSA: hda - Flush the pending probe work at
remove] introduced the sync of async probe work at remove for fixing
the race.  However, this may lead to another hangup when the module
removal is performed quickly before starting the probe work, because
it issues flush_work() and it's blocked forever.

The workaround is to use cancel_work_sync() instead of flush_work()
there.

Fixes: 991f86d7 ('ALSA: hda - Flush the pending probe work at remove')
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On Broxton, to make sure the reset controller works properly,
MISCBDCGE bit (bit 6) in CGCTL (0x48) of PCI configuration space
need be cleared before reset and set back to 1 after reset.
Otherwise, it may prevent the CORB/RIRB logic from being reset.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As HD-audio driver does deferred probe internally via workqueue, the
driver might go into the mixed state doing both probe and remove when
the module gets unloaded during the probe work.  This eventually
triggers an Oops, unsurprisingly.

For avoiding this race, we just need to flush the pending probe work
explicitly before actually starting the resource release.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=960710
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently HD-audio driver on Intel Skylake or Broxteon gives an error
message when binding with i915 audio component fails.  However, this
isn't any serious error on a system without Intel graphics.  Indeed
there are such systems, where a third-party codec (e.g. Creative) is
put on the mobo while using other discrete GPU (e.g. Nvidia).
Printing a kernel "error" message is overreaction in such a case.

This patch downgrades the print level for that message.  For systems
that mandate the i915 binding (e.g. Haswell or Broadwell HDMI/DP),
another kernel error message is shown in addition to make clear what
went wrong.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently the info in /proc/interrupts doesn't allow to figure out which
interrupt belongs to which card (HDMI, PCH, ..).
Therefore add card details to the interrupt description.
With the patch the info in /proc/interrupts looks like this:

PCI-MSI 442368-edge      snd_hda_intel:card1
PCI-MSI 49152-edge      snd_hda_intel:card0

NOTE: this patch adds the new irq_descr field snd_card struct that is
filled automatically at a card object creation.  This can be used
generically for other drivers as well.  The changes for others will
follow later -- tiwai
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It takes three minutes to enter into hibernation on some OEM SKL
machines and we see many codec spurious response after thaw() opertion.
This is because HDA is still in D0 state after freeze() call and
pci_pm_freeze/pci_pm_freeze_noirq() don't set D3 hot in pci_bus driver.
It seems bios still access HDA when system enter into freeze state,
HDA will receive codec response interrupt immediately after thaw() call.
Because of this unexpected interrupt, HDA enter into a abnormal
state and slow down the system enter into hibernation.

In this patch, we put HDA into D3 hot state in azx_freeze_noirq() and
put HDA into D0 state in azx_thaw_noirq().

V2: Only apply this fix to SKL+
    Fix compile error when CONFIG_PM_SLEEP isn't defined

[Yet another fix for CONFIG_PM_SLEEP ifdef and the additional comment
 by tiwai]
Signed-off-by: NXiong Zhang <xiong.y.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AZX_DCAPS_REVERSE_ASSIGN is no longer referred by any code.
Let's drop it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AZX_DCAPS_POSFIX_VIA is coupled always with AZX_DRIVER_VIA type, so we
don't have to keep this bit in dcaps.  Save one more!
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AZX_DCAPS_RIRB_DELAY is dedicated only for Nvidia and its purpose is
just to set a flag in bus.  So it's better to be set in the toplevel
driver, either hda_intel.c or hda_tegra.c, instead of the common
hda_controller.c.  This also allows us to strip this flag from dcaps,
so save one more bit there.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AZX_DCAPS_RIRB_PRE_DELAY is always tied with AZX_DCAPS_CTX_WORKAROUND,
which is Creative's XFi specific.  So, we can replace it and reduce
one more bit free for DCAPS.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Intel Atom processors seem to have a problem at recording when
bdl_pos_adj is set to an odd value.  When a value like 1 is used, it
may drop the samples unexpectedly.  Actually, for the old Atoms, we
used to set AZX_DRIVER_SCH type, and this assigns 32 as default.
Meanwhile the newer chips, Baytrail and Braswell, are set as
AZX_DRIVER_PCH, and the lower default value, 1, is assigned.

This patch changes the default values for these chipsets to a safer
default, 32, again.  Since changing the driver type (AZX_DRIVER_XXX)
leads to the rename of the driver string, it would result in a
possible regression.  So, we can't change the type.  Instead, in this
patch, manual (ugly) PCI ID checks are added on top.

A drawback by this increase is the slight increase of the latency, but
it's a sub-ms order in normal situations, so mostly negligible.
Reported-and-tested-by: NJochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>