- 09 8月, 2019 1 次提交
-
-
由 Chuhong Yuan 提交于
refcount_t is better for reference counters since its implementation can prevent overflows. So convert atomic_t ref counters to refcount_t. Signed-off-by: NChuhong Yuan <hslester96@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 7月, 2019 1 次提交
-
-
由 Matthew Wilcox (Oracle) 提交于
I missed a few places. One is in some ifdeffed code which will probably never be re-enabled; the others are in drivers which can't currently be compiled on x86. Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 5月, 2019 1 次提交
-
-
由 Madalin Bucur 提交于
Make sure only the portals for the online CPUs are used. Without this change, there are issues when someone boots with maxcpus=n, with n < actual number of cores available as frames either received or corresponding to the transmit confirmation path would be offered for dequeue to the offline CPU portals, getting lost. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 5月, 2019 1 次提交
-
-
由 Laurentiu Tudor 提交于
Fix issue with the entry indexing in the sg frame cleanup code being off-by-1. This problem showed up when doing some basic iperf tests and manifested in traffic coming to a halt. Signed-off-by: NLaurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2019 1 次提交
-
-
由 Madalin Bucur 提交于
As txq_trans_update() only updates trans_start when the lock is held, trans_start does not get updated if NETIF_F_LLTX is declared. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2018 1 次提交
-
-
由 Joakim Tjernlund 提交于
This allows to control carrier from /sys/class/net/ethX/carrier for Fixed PHYs. Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2018 1 次提交
-
-
由 Andrew Lunn 提交于
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 10月, 2018 1 次提交
-
-
由 Nathan Chancellor 提交于
Clang warns: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2734:34: warning: tentative array definition assumed to have one element static const struct of_device_id dpaa_match[]; ^ 1 warning generated. Turns out that since this driver was introduced in commit 9ad1a374 ("dpaa_eth: add support for DPAA Ethernet"), this declaration has been unused. Remove it to silence the warning. Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Acked-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 9月, 2018 1 次提交
-
-
由 YueHaibing 提交于
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 9月, 2018 1 次提交
-
-
由 Andrew Lunn 提交于
Rather than have the MAC drivers manipulate phydev members to indicate they support Asym Pause, add a helper function. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 9月, 2018 1 次提交
-
-
由 Igor Stoppa 提交于
Both WARN_ON() and WARN_ONCE() already contain an unlikely(), so it's not necessary to wrap it into another. Signed-off-by: NIgor Stoppa <igor.stoppa@huawei.com> Cc: Madalin Bucur <madalin.bucur@nxp.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 6月, 2018 1 次提交
-
-
由 Madalin Bucur 提交于
The DPAA HW requires that at least 256 bytes from the start of the first scatter-gather table entry are allocated and accessible. The hardware reads the maximum size the table can have in one access, thus requiring that the allocation and mapping to be done for the maximum size of 256B even if there is a smaller number of entries in the table. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2018 1 次提交
-
-
由 Yangbo Lu 提交于
This patch is to add hardware timestamping support for dpaa_eth. On Rx, timestamping is enabled for all frames. On Tx, we only instruct the hardware to timestamp the frames marked accordingly by the stack. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Acked-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 15 3月, 2018 4 次提交
-
-
由 Camelia Groza 提交于
The tx_errors counter is incremented by the dpaa_xmit caller. Signed-off-by: NCamelia Groza <camelia.groza@nxp.com> Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Camelia Groza 提交于
Signed-off-by: NCamelia Groza <camelia.groza@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Camelia Groza 提交于
The fd_format has already been initialized at this point. Signed-off-by: NCamelia Groza <camelia.groza@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
The recent changes that make the driver probing compatible with DSA were not propagated in the dpa_remove() function, breaking the module unload function. Using the proper device to address the issue. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2018 4 次提交
-
-
由 Radu Bulie 提交于
This patch adds allmulticast option for memac, dtsec and 10GEC controllers. Signed-off-by: NRadu Bulie <radu-andrei.bulie@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
Simplify the code and avoid some Rx errors not being accounted. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
An issue in the code mapping the skb fragments into scatter-gather frames was evidentiated by netperf TCP_SENDFILE tests. The size was set wrong for all fragments but the first, affecting the transmission of any skb with more than one fragment. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 2月, 2018 1 次提交
-
-
由 Jake Moroni 提交于
The comment stated that a thread was started, but that is not the case. Signed-off-by: NJake Moroni <mail@jakemoroni.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 11月, 2017 2 次提交
-
-
由 Wei Yongjun 提交于
Fix to return a negative error code from the dpaa_bp_alloc() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Change TC_SETUP_MQPRIO to TC_SETUP_QDISC_MQPRIO to match the new convention. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 11月, 2017 1 次提交
-
-
由 Arnd Bergmann 提交于
We can now build this driver on ARM, so I ran into a randconfig build warning that presumably had existed on powerpc already. drivers/net/ethernet/freescale/dpaa/dpaa_eth.c: In function 'sg_fd_to_skb': drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:1712:18: error: 'skb' may be used uninitialized in this function [-Werror=maybe-uninitialized] I'm slightly changing the logic here, to make it obvious to the compiler that 'skb' is always initialized. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 11月, 2017 2 次提交
-
-
由 yuan linyu 提交于
Signed-off-by: Nyuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 yuan linyu 提交于
Signed-off-by: Nyuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 10月, 2017 4 次提交
-
-
由 Madalin Bucur 提交于
Comment is no longer valid for a long time now. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
Change device used for DMA mapping to the MAC device that is an of_device, with proper DMA ops. Using this device for the netdevice should also address the issue with DSA scenarios that need the netdevice to be backed by an of_device. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 8月, 2017 3 次提交
-
-
由 Madalin Bucur 提交于
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
Set the skb hash when then FMan Keygen hash result is available. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
Add a block of 128 Rx frame queues per port. The FMan hardware will send traffic on one of these queues based on the FMan port Parse Classify Distribute setup. The hash computed by the FMan Keygen block will select the Rx FQ. Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 8月, 2017 1 次提交
-
-
由 Arvind Yadav 提交于
platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2017 4 次提交
-
-
由 Jiri Pirko 提交于
Get rid of struct tc_to_netdev which is now just unnecessary container and rather pass per-type structures down to drivers directly. Along with that, consolidate the naming of per-type structure variables in cls_*. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Change the return value from -EINVAL to -EOPNOTSUPP. The rest of the drivers have it like that, so be aligned. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
As ndo_setup_tc is generic offload op for whole tc subsystem, does not really make sense to have cls-specific args. So move them under cls_common structurure which is embedded in all cls structs. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since the type is always present, push it to be a separate argument to ndo_setup_tc. On the way, name the type enum and use it for arg type. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-