- 29 5月, 2005 20 次提交
-
-
由 Dmitry Torokhov 提交于
core takes care of calling open and close methods only when needed. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
serialize open and close calls and ensure that device's open and close methods are only called when first user opens it or last user closes it. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
functions as they are not doing anything. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
through Lindent and adjust results. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Windows does. This should make life easier for devices that were tested with Windows only. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Hans-Christian Egtvedt 提交于
From: Hans-Christian Egtvedt <hc@mivu.no> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Richard Purdie 提交于
as function keys instead of special keys. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Juergen Kreileder 提交于
Signed-off-by: NJuergen Kreileder <jk@blackdown.de> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jeremy Fitzhardinge 提交于
I've tested it with a Logitech WingMan Rumblepad on an x86-64 machine, and on an ia32 machine to make sure I didn't break anything. Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
offers the gameport part already. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
either, since ALSA handles it nicely. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 28 5月, 2005 14 次提交
-
-
由 Dmitry Torokhov 提交于
is no reason one driver should take 10 lines in dmesg. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
put in MUX mode - Fujitsu Lifebook S6230 Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
because it interferes with ALPS touchpad detection and causes horrible death on reboot. Since P10 does not have external PS/2 ports MUX mode does not have any advantages over legacy mode anyway. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
mapped twice, resulting in it being the last (instead of first) button on a joystick. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
sends an incorrect ID and wasn't recognized. Reported-by: NStefan Seyfried <seife@suse.de> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Kurt Garloff 提交于
when no i8042 controller (not PnP, not legacy) is present. From: Kurt Garloff <garloff@suse.de> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
for i386, it's printed on many machines and usually is not a cause for worry. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
-
由 Vojtech Pavlik 提交于
wrong, since it may (will) contain nonsensical data. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
when only a keyboard part of the controller is detected. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Adrian Bunk 提交于
This patch adds dummy gameport_register_port, gameport_unregister_port and gameport_set_phys functions to gameport.h for the case when a driver can't use gameport. This fixes the compilation of some OSS drivers with GAMEPORT=n without the need to #if inside every single driver. This patch also removes the non-working and now obsolete SOUND_GAMEPORT. This patch is also an alternative solution for ALSA drivers with similar problems (but #if's inside the drivers might have the advantage of saving some more bytes of gameport is not available). The only user-visible change is that for GAMEPORT=m the affected OSS drivers are now allowed to be built statically (but they won't have gameport support). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 27 5月, 2005 6 次提交
-
-
由 Alexander Nyberg 提交于
Even after the previous fix you can still set CONFIG_ACPI_BOOT indirectly even without CONFIG_ACPI by choosing CONFIG_PCI and CONFIG_PCI_MMCONFIG. That doesn't build very well either. This makes PCI_MMCONFIG depend on ACPI, fixing that hole. [ I guess in theory Kconfig could follow the whole chain of dependencies for things that get selected, but that sounds insanely complicated, so we'll just fix up these things by hand. --Linus ] Signed-off-by: NAlexander Nyberg <alexn@telia.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Len Brown 提交于
Fix 2.6.12 CONFIG_ACPI=n build regression. CONFIG_ACPI_BOOT shall be set only if CONFIG_ACPI. Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexander Nyberg 提交于
quirk_via_irqpic can't be __devinit for swsuspend Signed-off-by: NAlexander Nyberg <alexn@telia.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Len Brown 提交于
Delete quirk_via_bridge(), restore quirk_via_irqpic() -- but now improved to be invoked upon device ENABLE, and now only for VIA devices -- not all devices behind VIA bridges. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
There is a race in the kernel cpuset code, between the code to handle notify_on_release, and the code to remove a cpuset. The notify_on_release code can end up trying to access a cpuset that has been removed. In the most common case, this causes a NULL pointer dereference from the routine cpuset_path. However all manner of bad things are possible, in theory at least. The existing code decrements the cpuset use count, and if the count goes to zero, processes the notify_on_release request, if appropriate. However, once the count goes to zero, unless we are holding the global cpuset_sem semaphore, there is nothing to stop another task from immediately removing the cpuset entirely, and recycling its memory. The obvious fix would be to always hold the cpuset_sem semaphore while decrementing the use count and dealing with notify_on_release. However we don't want to force a global semaphore into the mainline task exit path, as that might create a scaling problem. The actual fix is almost as easy - since this is only an issue for cpusets using notify_on_release, which the top level big cpusets don't normally need to use, only take the cpuset_sem for cpusets using notify_on_release. This code has been run for hours without a hiccup, while running a cpuset create/destroy stress test that could crash the existing kernel in seconds. This patch applies to the current -linus git kernel. Signed-off-by: NPaul Jackson <pj@sgi.com> Acked-by: NSimon Derr <simon.derr@bull.net> Acked-by: NDinakar Guniguntala <dino@in.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
The original pwc author raised some questions about the reverse engineering of the decompressor algorithms used in the pwc driver. Having done some detailed investigation it appears those concerns that clean room policy was not followed are reasonable. I've also had a friendly discussion with Philips to ask their view on this. This removes the problem items of code which reduces the pwc functionality in the kernel a little but leaves all the framework for setup that will be needed for decompressors in user space (where they eventually belong). This change set is designed to be the minimal risk change set given that 2.6.12 is hopefully close to hand, with a view to merging the much updated pwc code in 2.6.13 series kernels. Someone else can then redo the decompressors properly (clean room) in user space. Note that while its easy to say that it should have been caught earlier, but the violation was really only obvious to someone who had access to both the proprietary source and the 'GPL' source.
-