This patch moves the handling of the chip's enable pin from the board
code into the driver. It also updates all board-code files using the
driver to incorporate this change.

This is needed for device tree support of the enable pin.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

This enables setting a default trigger on an LP55xx channel,
either from platform data or device tree. This mechanism is
identical to the mechanism for GPIO LEDs and references the
common LEDs device tree bindings.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Tested-by: NMilo Kim <milo.kim@ti.com>
Acked-by: NMilo Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

LP8501 can drive up to 9 channels like LP5523.
LEDs can be controlled directly via the I2C and programmable engines are
supported.

LP55xx common driver
 LP8501 is one of LP55xx family device, so LP55xx common code are used.
 Chip specific data is defined in the structure, 'lp55xx_device_config'.

Differences between LP8501 and LP5523
 Different register layout for LED output control and others.
 LP8501 specific feature for separate output power selection.
 LP8501 doesn't support external clock detection.
 Different programming engine data.

LP8501 specific feature - output power selection
 Output channels are selected by power selection - Vout or Vdd.
 Separate power for VDD1-6 and VDD7-9 are available.
 It is configurable in the platform data.
 To support this feature, LP55xx DT structure and header are changed.
 Device tree binding is updated as well.

LED pattern data
 Example pattern data is updated in the driver documentation.
Signed-off-by: NMilo Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The LP55xx DT structure is applicable to the LP5562 device.
The driver and documentation are updated.

Compatible property of the DT
: LP5521 and LP5223 were manufactured by National Semiconductor.
  LP5562 is a new device from Texas Instruments.

Cc: Gabriel Fernandez <gabriel.fernandez@stericsson.com>
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Currently, the LP55xx DT structure supports max 3 channels.
However, LP5523 has max 9 channels and LP5562 has 4 channels.
To enhance this constraint, the DT structure has been changed.

 (a) Use the child node for various channel settings instead of fixed array
 (b) Remove 'num_channel' property.
     This value can be retrieved by counting the children node.
 (c) 'chan-name' property supported
 (d) Documentation updates for LP5521 and LP5523

(cooloney@gmail.com: fix a coding style issue in leds-lp55xx.txt)

Cc: Gabriel Fernandez <gabriel.fernandez@stericsson.com>
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

This patch allows the lp5521 driver to be successfully probed and
initialised when Device Tree support is enabled.

Based on a patch by Gabriel Fernandez, rewritten in accordance
with review feedback.

Cc: Gabriel Fernandez <gabriel.fernandez@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NMilo Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>