The Multi-Core Timer(MCT) of EXYNOS4 is designed for implementing
clock source timer and clock event timers. This patch implements
1 clock source timer with 64 bit free running counter of MCT and
2 clock event timers with two of 31-bit tick counters.
Signed-off-by: NChanghwan Youn <chaos.youn@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds IRQ_MCT_G0 to irq map. IRQ_MCT_G0 is an interrupt
of MCT comparator and used for kernel global timer.
Signed-off-by: NChanghwan Youn <chaos.youn@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The MCT(Multi-Core Timer) is used for implementing kernel timers
for EXYNOS4210.
Signed-off-by: NChanghwan Youn <chaos.youn@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patche fixes wrong S/PDIF SFR base address.
Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch enables lcd and backlight drivers in NURI board.
Signed-off-by: NDonghwa Lee <dh09.lee@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds the parent clock for watchdog timer for EXYNOS4.
Signed-off-by: NInderpal Singh <inderpal.s@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The regulator API ifdefs itself out when not enabled
so there is no need for users to do this.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: edited description]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds Samsung ARMLEX4210  board support file
which is based on Exynos4210.
Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com>
[kgene.kim@samsung.com: added clk_type for hsmmc3]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds basic definitions for MAX8952 & LP3974 (MAX8998
compatible) PMICs for UniversalC210 board. Power consumers for the
device drivers will be added later. These two PMICs occupy I2C5 bus.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds Samsung NURI board support.
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch fixes wrong constants in the hotplug assembly code for
Exynos4 such as Russell's changing in vexpress hotplug and fixes
hard-coded control register constatns also.
Reported-by: NChanghwan Youn <chaos.youn@samsung.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch changes dependency of ARCH_EXYNOS4 from ARCH_S5PV310
according to the change of ARCH name, EXYNOS4.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch changes dependency of ARCH_EXYNOS4 from ARCH_S5PV310
according to the change of ARCH name, EXYNOS4.
Acked-by: NJassi Brar <jassi.brar@samsung.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch updates EXYNOS4 OneNAND support according to the change of
ARCH name, EXYNOS4.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch changes the Kconfig and Makefile for the new ARCH_EXYNOS4.
It also updates arch/arm/Kconfig, Makeifile and arch/arm/mm/Kconfig
to include support for the new ARCH_EXYNOS4.

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch moves board support files, SMDKC210, SMKDV310
and UNIVERSAL_C210 into arch/arm/mach-exynos4/ according
to the change of ARCH name, EXYNOS4.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch updates device support of EXYNOS4 according to the change of
ARCH name, EXYNOS4.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch updates Timer part of EXYNOS4 according to the change of
ARCH name, EXYNOS4.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch updates IRQ part of EXYNOS4 according to the change of
ARCH name, EXYNOS4.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch updates Clock part of EXYNOS4 according to the change of
ARCH name, EXYNOS4.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds EXYNOS4 CPU support files in mach-exynos4,
and basically they are moved from mach-s5pv310 so that it
can support Samsung's new CPU name, EXYNOS4.
The EXYNOS4 ingegrates a ARM Cortex A9 multi-core.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Copy up lower inode attrs in getattr
  ecryptfs: read on a directory should return EISDIR if not supported
  eCryptfs: Handle NULL nameidata pointers
  eCryptfs: Revert "dont call lookup_one_len to avoid NULL nameidata"

The current code does not follow Intel documentation: It misses some things
and does other, undocumented things. This causes wrong backlight values in
certain conditions. Instead of adding tricky code handling badly documented
and rare corner cases, don't handle combination mode specially at all. This
way PCI_LBPC is never touched and weird things shouldn't happen.

If combination mode is enabled, then the only downside is that changing the
brightness has a greater granularity (the LBPC value), but LBPC is at most
254 and the maximum is in the thousands, so this is no real functional loss.

A potential problem with not handling combined mode is that a brightness of
max * PCI_LBPC is not bright enough. However, this is very unlikely because
from the documentation LBPC seems to act as a scaling factor and doesn't look
like it's supposed to be changed after boot. The value at boot should always
result in a bright enough screen.

IMPORTANT: However, although usually the above is true, it may not be when
people ran an older (2.6.37) kernel which messed up the LBPC register, and
they are unlucky enough to have a BIOS that saves and restores the LBPC value.
Then a good kernel may seem to not work: Max brightness isn't bright enough.
If this happens people should boot back into the old kernel, set brightness
to the maximum, and then reboot. After that everything should be fine.

For more information see the below links. This fixes bugs:

  http://bugzilla.kernel.org/show_bug.cgi?id=23472
  http://bugzilla.kernel.org/show_bug.cgi?id=25072Signed-off-by: NIndan Zupancic <indan@nul.nu>
Tested-by: NAlex Riesen <raa.lkml@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We force particular alignment when we generate attribute structures
when generation MODULE_VERSION() data and we need to make sure that
this alignment is followed when we iterate over these structures,
otherwise we may crash on platforms whose natural alignment is not
sizeof(void *), such as m68k.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
[ There are more issues here, but the fixes are incredibly ugly - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  dell-laptop: Toggle the unsupported hardware killswitch
  thinkpad_acpi: Always report scancodes for hotkeys
  acer-wmi: Fix capitalisation of GUID
  platform/x86: ideapad-laptop depends on INPUT
  platform: x86: acer-wmi: world-writable sysfs threeg file
  platform: x86: asus_acpi: world-writable procfs files
  platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files
  platform-drivers: x86: pmic: Use request_irq instead of chained handler
  platform-drivers: x86: pmic: Use irq_chip buslock mechanism
  platform-drivers: x86: Convert pmic to new irq_chip functions
  platform-drivers: x86: pmic: Fix up bogus irq hackery

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  fixdep: Do not record dependency on the source file itself

Add fs/eventfd.c to filesystems docbook.
Make typo corrections in fs/eventfd.c.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the "log_buf_len" description to use [KMG] syntax for the
buffer size.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The '[KMG]' suffix is commonly described after a number of kernel
parameter values documentation.  Explicitly state its semantics.
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Complete the crashkernel= kernel parameter documentation.
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NSimon Horman <horms@verge.net.au>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: keep reference to parent inode on ceph_dentry
  ceph: queue cap_snaps once per realm
  libceph: fix socket write error handling
  libceph: fix socket read error handling

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S5PV210: Fix regulator names
  ARM: S5PV210: Update max8998_platform_data
  ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata
  ARM: S5P: Fix end address in memory resource information for UART devices
  ARM: S5P64X0: Cleanup map.h file
  ARM: S5P6442: Cleanup map.h file
  ARM: S5PC100: Clenaup map.h file
  ARM: S5PV210: Cleanup map.h file
  ARM: S5PV310: Cleanup map.h file

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] update cifs version
  cifs: Fix regression in LANMAN (LM) auth code
  cifs: fix handling of scopeid in cifs_convert_address

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6745/1: kprobes insn decoding fix
  ARM: tlb: move noMMU tlb_flush() to asm/tlb.h
  ARM: tlb: delay page freeing for SMP and ARMv7 CPUs
  ARM: Keep exit text/data around for SMP_ON_UP
  ARM: Ensure predictable endian state on signal handler entry
  ARM: 6740/1: Place correctly notes section in the linker script
  ARM: 6700/1: SPEAr: Correct SOC config base address for spear320
  ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset
  ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h
  ARM: 6720/1: SPEAr: Append UL to VMALLOC_END
  ARM: 6676/1: Correct the cpu_architecture() function for ARMv7
  ARM: 6739/1: update .gitignore for boot/compressed
  ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation
  ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems
  ARM: 6741/1: errata: pl310 cache sync operation may be faulty

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] net: provide architecture specific NET_SKB_PAD
  [S390] atomic: use inline asm
  [S390] correct ipl parameter block safe guard
  [S390] atomic: use ACCESS_ONCE() for atomic_read()
  [S390] dasd: correct device table

Update version to 1.71 so we can more easily spot modules with the last two fixes
Signed-off-by: NSteve French <sfrench@us.ibm.com>

It is found on Dell Inspiron 1018 that the firmware reports that the hardware
killswitch is not supported. This makes the rfkill key not functional.

This patch forces the driver to toggle the firmware rfkill status in the case
that the hardware killswitch is indicated as unsupported by the firmware.
Signed-off-by: NKeng-Yu Lin <keng-yu.lin@canonical.com>
Tested-by: NAlessio Igor Bogani <abogani@texware.it>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Some thinkpad hotkeys report key codes like KEY_FN_F8 when something
like KEY_VOLUMEDOWN is desired. Always provide the scan codes in
addition to the key codes to assist with debugging these issues. Also
send the scan code before the key code to match what other drivers do,
as some userspace utilities expect this ordering.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>