HIP08 supports RC inline up to size of 32 Bytes, and all data should be
put into SQWQE. For HIP09, this capability is extended to 1024 Bytes, if
length of data is longer than 32 Bytes, they will be filled into extended
sge space.

Link: https://lore.kernel.org/r/1599744069-9968-1-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The sq_sig_type field should be filled when querying QP, or the users may
get a wrong value.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1600509802-44382-9-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The hardware will add AckReq flag in BTH header according to the value of
ack_req_freq to request ACK from responder for the packets with this flag.
It should be greater than or equal to lp_pktn_ini instead of using a fixed
value.

Fixes: 7b9bd73e ("RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC")
Link: https://lore.kernel.org/r/1600509802-44382-8-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The rnr_retry returned to the user is not correct, it should be got from
another fields in QPC.

Fixes: bfe86035 ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1600509802-44382-7-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

calc_pg_sz() may gets a data calculation overflow if the PAGE_SIZE is 64 KB
and hop_num is 2. It is because that all variables involved in calculation
are defined in type of int. So change the type of bt_chunk_size,
buf_chunk_size and obj_per_chunk_default to u64.

Fixes: ba6bb7e9 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1600509802-44382-6-git-send-email-liweihang@huawei.comSigned-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

According to the RoCE v1 specification, the sl (service level) 0-7 are
mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
driver should verify whether the the value of sl is larger than 7, if so,
an exception should be returned.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1600509802-44382-5-git-send-email-liweihang@huawei.comSigned-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Change "initialze" to "initialize".

Fixes: 8f3e9f3e ("IB/hns: Add code for refreshing CQ CI using TPTR")
Link: https://lore.kernel.org/r/1600509802-44382-4-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

HIP08 doesn't support modifying the maximum number of outstanding WR in an
SRQ. However, the driver does not return a failure message, and users may
mistakenly think that the resizing is executed successfully. So the driver
needs to intercept this operation.

Fixes: ffb1308b ("RDMA/hns: Move SRQ code to the reasonable place")
Link: https://lore.kernel.org/r/1600509802-44382-3-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

According to the IB specifications, the verbs should return an immediate
error when the users set an unsupported opcode. Furthermore, refactor codes
about opcode in process of post_send to make the difference between opcodes
clearer.

Link: https://lore.kernel.org/r/1600509802-44382-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

For HIP09, size of SCCC (Soft Congestion Control Context) is increased to
64 Bytes from 32 Bytes. The hardware will get the configuration of SCCC
from driver instead of using a fixed value.

Link: https://lore.kernel.org/r/1600245806-56321-5-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The new version of RoCEE supports using QPC in size of 256B or 512B, so
that HIP09 can supports new congestion control algorithms by using QPC in
larger size.

Link: https://lore.kernel.org/r/1600245806-56321-4-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The new version of RoCEE supports using CQE in size of 32B or 64B. The
performance of bus can be improved by using larger size of CQE.

Link: https://lore.kernel.org/r/1600245806-56321-3-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The new version of RoCEE supports using CEQE in size of 4B or 64B, AEQE in
size of 16B or 64B. The performance of bus can be improved by using larger
size of EQE.

Link: https://lore.kernel.org/r/1600245806-56321-2-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

sg_init_table() zeroes its first argument, so the allocation of that
argument doesn't have to.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,n,flags;
@@

x =
- kcalloc
+ kmalloc_array
  (n,sizeof(*x),flags)
...
sg_init_table(x,n)
// </smpl>

Link: https://lore.kernel.org/r/1600601186-7420-6-git-send-email-Julia.Lawall@inria.frSigned-off-by: NJulia Lawall <Julia.Lawall@inria.fr>
Acked-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Occasionally ib_write_bw crash is seen due to access of a pd object in
i40iw_sc_qp_destroy after it is freed. Destroy qp is not synchronous in
i40iw and thus the iwqp object could be referencing a pd object that is
freed by ib core as a result of successful return from i40iw_destroy_qp.

Wait in i40iw_destroy_qp till all QP references are released and destroy
the QP and its associated resources before returning.  Switch to use the
refcount API vs atomic API for lifetime management of the qp.

 RIP: 0010:i40iw_sc_qp_destroy+0x4b/0x120 [i40iw]
 [...]
 RSP: 0018:ffffb4a7042e3ba8 EFLAGS: 00010002
 RAX: 0000000000000000 RBX: 0000000000000001 RCX: dead000000000122
 RDX: ffffb4a7042e3bac RSI: ffff8b7ef9b1e940 RDI: ffff8b7efbf09080
 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
 R10: 8080808080808080 R11: 0000000000000010 R12: ffff8b7efbf08050
 R13: 0000000000000001 R14: ffff8b7f15042928 R15: ffff8b7ef9b1e940
 FS:  0000000000000000(0000) GS:ffff8b7f2fa00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000400 CR3: 000000020d60a006 CR4: 00000000001606e0
 Call Trace:
  i40iw_exec_cqp_cmd+0x4d3/0x5c0 [i40iw]
  ? try_to_wake_up+0x1ea/0x5d0
  ? __switch_to_asm+0x40/0x70
  i40iw_process_cqp_cmd+0x95/0xa0 [i40iw]
  i40iw_handle_cqp_op+0x42/0x1a0 [i40iw]
  ? cm_event_handler+0x13c/0x1f0 [iw_cm]
  i40iw_rem_ref+0xa0/0xf0 [i40iw]
  cm_work_handler+0x99c/0xd10 [iw_cm]
  process_one_work+0x1a1/0x360
  worker_thread+0x30/0x380
  ? process_one_work+0x360/0x360
  kthread+0x10c/0x130
  ? kthread_park+0x80/0x80
  ret_from_fork+0x35/0x40

Fixes: d3749841 ("i40iw: add files for iwarp interface")
Link: https://lore.kernel.org/r/20200916131811.2077-1-shiraz.saleem@intel.comReported-by: NKamal Heib <kheib@redhat.com>
Signed-off-by: NSindhu, Devale <sindhu.devale@intel.com>
Signed-off-by: NShiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Add separate stats types for send messages and RDMA read work requests.

Link: https://lore.kernel.org/r/20200915141449.8428-3-galpress@amazon.comSigned-off-by: NDaniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The keep alive received counter is a software stat, keep it grouped with
all other software stats.  Since all stored stats are software stats,
remove the efa_sw_stats struct and use efa_stats instead.

Link: https://lore.kernel.org/r/20200915141449.8428-2-galpress@amazon.comReviewed-by: NDaniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Use rdma_restrack_set_name() and rdma_restrack_parent_name() instead of
tricky uses of rdma_restrack_attach_task()/rdma_restrack_uadd().

This uniformly makes all restracks add'd using rdma_restrack_add().

Link: https://lore.kernel.org/r/20200922091106.2152715-6-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Have a single rdma_restrack_add() that adds an entry, there is no reason
to split the user/kernel here, the rdma_restrack_set_task() is responsible
for this difference.

This patch prepares the code to the future requirement of making restrack
is mandatory for managing ib objects.

Link: https://lore.kernel.org/r/20200922091106.2152715-5-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Refactor the restrack code to make sure the kref inside the restrack entry
properly kref's the object in which it is embedded. This slight change is
needed for future conversions of MR and QP which are refcounted before the
release and kfree.

The ideal flow from ib_core perspective as follows:
* Allocate ib_* structure with rdma_zalloc_*.
* Set everything that is known to ib_core to that newly created object.
* Initialize kref with restrack help
* Call to driver specific allocation functions.
* Insert into restrack DB
....
* Return and release restrack with restrack_put.

Largely this means a rdma_restrack_new() should be called near allocating
the containing structure.

Link: https://lore.kernel.org/r/20200922091106.2152715-4-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The restrack is going to manage memory of all IB objects and must be
called before object is created. GSI QP in the mlx5_ib separated between
creating dummy interface and HW object beneath. This was achieved by
double call to ib_create_qp().

In order to skip such reentry call to internal driver create_qp code.

Link: https://lore.kernel.org/r/20200922091106.2152715-3-leon@kernel.orgReviewed-by: NMark Zhang <markz@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Update the code to have similar destroy pattern like other IB objects.

This change create asymmetry to the rdma_id_private create flow to make
sure that memory is managed by restrack.

Link: https://lore.kernel.org/r/20200922091106.2152715-2-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

ucma_destroy_id() assumes that all things accessing the ctx will do so via
the xarray. This assumption violated only in the case the FD is being
closed, then the ctx is reached via the ctx_list. Normally this is OK
since ucma_destroy_id() cannot run concurrenty with release(), however
with ucma_migrate_id() is involved this can violated as the close of the
2nd FD can run concurrently with destroy on the first:

                CPU0                      CPU1
        ucma_destroy_id(fda)
                                  ucma_migrate_id(fda -> fdb)
                                       ucma_get_ctx()
        xa_lock()
         _ucma_find_context()
         xa_erase()
        xa_unlock()
                                       xa_lock()
                                        ctx->file = new_file
                                        list_move()
                                       xa_unlock()
                                      ucma_put_ctx()

                                   ucma_close(fdb)
                                      _destroy_id()
                                      kfree(ctx)

        _destroy_id()
          wait_for_completion()
          // boom, ctx was freed

The ctx->file must be modified under the handler and xa_lock, and prior to
modification the ID must be rechecked that it is still reachable from
cur_file, ie there is no parallel destroy or migrate.

To make this work remove the double locking and streamline the control
flow. The double locking was obsoleted by the handler lock now directly
preventing new uevents from being created, and the ctx_list cannot be read
while holding fgets on both files. Removing the double locking also
removes the need to check for the same file.

Fixes: 88314e4d ("RDMA/cma: add support for rdma_migrate_id()")
Link: https://lore.kernel.org/r/0-v1-05c5a4090305+3a872-ucma_syz_migrate_jgg@nvidia.com
Reported-and-tested-by: syzbot+cc6fc752b3819e082d0c@syzkaller.appspotmail.com
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Once a mkey is created it can be modified using UMR. This is desirable for
performance reasons. However, different hardware has restrictions on what
modifications are possible using UMR. Make sense of these checks:

- mlx5_ib_can_reconfig_with_umr() returns true if the access flags can be
  altered. Most cases create MRs using 0 access flags (now made clear by
  consistent use of set_mkc_access_pd_addr_fields()), but the old logic
  here was tormented. Make it clear that this is checking if the current
  access_flags can be modified using UMR to different access_flags. It is
  always OK to use UMR to change flags that all HW supports.

- mlx5_ib_can_load_pas_with_umr() returns true if UMR can be used to
  enable and update the PAS/XLT. Enabling requires updating the entity
  size, so UMR ends up completely disabled on this old hardware. Make it
  clear why it is disabled. FRWR, ODP and cache always requires
  mlx5_ib_can_load_pas_with_umr().

- mlx5_ib_pas_fits_in_mr() is used to tell if an existing MR can be
  resized to hold a new PAS list. This only works for cached MR's because
  we don't store the PAS list size in other cases.

To be very clear, arrange things so any pre-created MR's in the cache
check the newly requested access_flags before allowing the MR to leave the
cache. If UMR cannot set the required access_flags the cache fails to
create the MR.

This in turn means relaxed ordering and atomic are now correctly blocked
early for implicit ODP on older HW.

Link: https://lore.kernel.org/r/20200914112653.345244-6-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

set_reg_wr() always fails if !umr_modify_entity_size_disabled because
mlx5_ib_can_use_umr() always fails. Without set_reg_wr() IB_WR_REG_MR
doesn't work and that means the device should not advertise
IB_DEVICE_MEM_MGT_EXTENSIONS.

Fixes: 841b07f9 ("IB/mlx5: Block MR WR if UMR is not possible")
Link: https://lore.kernel.org/r/20200914112653.345244-5-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Any mkey that is not enabled and assigned to userspace should have the PD
set to a kernel owned PD.

When cache entries are created for the first time the PDN is set to 0,
which is probably a kernel PD, but be explicit.

When a MR is registered using the hybrid reg_create with UMR xlt & enable
the disabled mkey is pointing at the user PD, keep it pointing at the
kernel until a UMR enables it and sets the user PD.

Fixes: 9ec4483a ("IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache")
Link: https://lore.kernel.org/r/20200914112653.345244-4-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

reg_create() open codes this helper, use the shared code.

Link: https://lore.kernel.org/r/20200914112653.345244-3-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

alloc_mr_from_cache() no longer returns EAGAIN, this is just dead code
now.

Fixes: aad719dc ("RDMA/mlx5: Allow MRs to be created in the cache synchronously")
Link: https://lore.kernel.org/r/20200914112653.345244-2-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

hip06 does not support IB_WR_LOCAL_INV, so the ps_opcode should be set to
an invalid value instead of being left uninitialized.

Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver")
Fixes: a2f3d447 ("RDMA/hns: Avoid unncessary initialization")
Link: https://lore.kernel.org/r/1600350615-115217-1-git-send-email-oulijun@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

When xa_insert() fails, the acquired resource in qedr_create_qp should
also be freed. However, current implementation does not handle the error.

Fix this by adding a new goto label that calls qedr_free_qp_resources.

Fixes: 1212767e ("qedr: Add wrapping generic structure for qpidr and adjust idr routines.")
Link: https://lore.kernel.org/r/20200911125159.4577-1-keitasuzuki.park@sslab.ics.keio.ac.jpSigned-off-by: NKeita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Receive side delayed ack mode is needed only for certain area networks/
connections. Therefore disable it by default.

Link: https://lore.kernel.org/r/20200909153707.2795-1-bharat@chelsio.comSigned-off-by: NPotnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Leon Romanovsky says:

====================
This series from Alex extends software steering interface to support
devices with extra capability "sw_owner_2" which will replace existing
"sw_owner".
====================

Based on the mlx5-next branch at
     git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.

* branch 'mlx5_sw_owner_v2:
  RDMA/mlx5: Expose TIR and QP ICM address for sw_owner_v2 devices
  RDMA/mlx5: Allow DM allocation for sw_owner_v2 enabled devices
  RDMA/mlx5: Add sw_owner_v2 bit capability

Leon Romanovsky says:

====================
IBTA declares speed as 16 bits, but kernel stores it in u8. This series
fixes in-kernel declaration while keeping external interface intact.
====================

Based on the mlx5-next branch at
     git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.

* branch 'mlx5_active_speed':
  RDMA: Fix link active_speed size
  RDMA/mlx5: Delete duplicated mlx5_ptys_width enum
  net/mlx5: Refactor query port speed functions

According to the IB spec active_speed size should be u16 and not u8 as
before. Changing it to allow further extensions in offered speeds.

Link: https://lore.kernel.org/r/20200917090223.1018224-4-leon@kernel.orgSigned-off-by: NAharon Landau <aharonl@mellanox.com>
Reviewed-by: NMichael Guralnik <michaelgur@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Expose the ICM address to access TIR and QP, this will allow sw_owned_v2
devices to steer traffic to TIRs and QPs same as done with sw_owner
capability.

Link: https://lore.kernel.org/r/20200903073857.1129166-4-leon@kernel.orgSigned-off-by: NAlex Vesker <valex@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

sw_owner_v2 will replace sw_owner for future devices, this means that if
sw_owner_v2 is set sw_owner should be ignored and DM allocation is
required for sw_owner_v2 devices to function.

Link: https://lore.kernel.org/r/20200903073857.1129166-3-leon@kernel.orgSigned-off-by: NAlex Vesker <valex@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Added sw_owner_v2 which will be enabled for future devices,
replacing sw_owner bit.
Signed-off-by: NAlex Vesker <valex@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>

Move struct ib_rwq_ind_table allocation to ib_core.

Link: https://lore.kernel.org/r/20200902081623.746359-3-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Move allocation and destruction of memory windows under ib_core
responsibility and clean drivers to ensure that no updates to MW
ib_core structures are done in driver layer.

Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Combine two same enums to avoid duplication.
Signed-off-by: NAharon Landau <aharonl@mellanox.com>
Reviewed-by: NMichael Guralnik <michaelgur@nvidia.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>