1. 28 4月, 2008 40 次提交
    • J
      return pfn from direct_access, for XIP · 30afcb4b
      Jared Hulbert 提交于
      Alter the block device ->direct_access() API to work with the new
      get_xip_mem() API (that requires both kaddr and pfn are returned).
      
      Some architectures will not do the right thing in their virt_to_page() for use
      by XIP (to translate from the kernel virtual address returned by
      direct_access(), to a user mappable pfn in XIP's page fault handler.
      
      However, we can't switch it to just return the pfn and not the kaddr, because
      we have no good way to get a kva from a pfn, and XIP requires the kva for its
      read(2) and write(2) handlers.  So we have to return both.
      Signed-off-by: NJared Hulbert <jaredeh@gmail.com>
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Cc: Carsten Otte <cotte@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: linux-mm@kvack.org
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      30afcb4b
    • N
      mm: add vm_insert_mixed · 423bad60
      Nick Piggin 提交于
      vm_insert_mixed will insert either a raw pfn or a refcounted struct page into
      the page tables, depending on whether vm_normal_page() will return the page or
      not.  With the introduction of the new pte bit, this is now a too tricky for
      drivers to be doing themselves.
      
      filemap_xip uses this in a subsequent patch.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Cc: Jared Hulbert <jaredeh@gmail.com>
      Cc: Carsten Otte <cotte@de.ibm.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      423bad60
    • N
      mm: introduce pte_special pte bit · 7e675137
      Nick Piggin 提交于
      s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory
      model (which is more dynamic than most).  Instead, they had proposed to
      implement it with an additional path through vm_normal_page(), using a bit in
      the pte to determine whether or not the page should be refcounted:
      
      vm_normal_page()
      {
      	...
              if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) {
                      if (vma->vm_flags & VM_MIXEDMAP) {
      #ifdef s390
      			if (!mixedmap_refcount_pte(pte))
      				return NULL;
      #else
                              if (!pfn_valid(pfn))
                                      return NULL;
      #endif
                              goto out;
                      }
      	...
      }
      
      This is fine, however if we are allowed to use a bit in the pte to determine
      refcountedness, we can use that to _completely_ replace all the vma based
      schemes.  So instead of adding more cases to the already complex vma-based
      scheme, we can have a clearly seperate and simple pte-based scheme (and get
      slightly better code generation in the process):
      
      vm_normal_page()
      {
      #ifdef s390
      	if (!mixedmap_refcount_pte(pte))
      		return NULL;
      	return pte_page(pte);
      #else
      	...
      #endif
      }
      
      And finally, we may rather make this concept usable by any architecture rather
      than making it s390 only, so implement a new type of pte state for this.
      Unfortunately the old vma based code must stay, because some architectures may
      not be able to spare pte bits.  This makes vm_normal_page a little bit more
      ugly than we would like, but the 2 cases are clearly seperate.
      
      So introduce a pte_special pte state, and use it in mm/memory.c.  It is
      currently a noop for all architectures, so this doesn't actually result in any
      compiled code changes to mm/memory.o.
      
      BTW:
      I haven't put vm_normal_page() into arch code as-per an earlier suggestion.
      The reason is that, regardless of where vm_normal_page is actually
      implemented, the *abstraction* is still exactly the same. Also, while it
      depends on whether the architecture has pte_special or not, that is the
      only two possible cases, and it really isn't an arch specific function --
      the role of the arch code should be to provide primitive functions and
      accessors with which to build the core code; pte_special does that. We do
      not want architectures to know or care about vm_normal_page itself, and
      we definitely don't want them being able to invent something new there
      out of sight of mm/ code. If we made vm_normal_page an arch function, then
      we have to make vm_insert_mixed (next patch) an arch function too. So I
      don't think moving it to arch code fundamentally improves any abstractions,
      while it does practically make the code more difficult to follow, for both
      mm and arch developers, and easier to misuse.
      
      [akpm@linux-foundation.org: build fix]
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Acked-by: NCarsten Otte <cotte@de.ibm.com>
      Cc: Jared Hulbert <jaredeh@gmail.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7e675137
    • J
      mm: introduce VM_MIXEDMAP · b379d790
      Jared Hulbert 提交于
      This series introduces some important infrastructure work.  The overall result
      is that:
      
      1. We now support XIP backed filesystems using memory that have no
         struct page allocated to them. And patches 6 and 7 actually implement
         this for s390.
      
         This is pretty important in a number of cases. As far as I understand,
         in the case of virtualisation (eg. s390), each guest may mount a
         readonly copy of the same filesystem (eg. the distro). Currently,
         guests need to allocate struct pages for this image. So if you have
         100 guests, you already need to allocate more memory for the struct
         pages than the size of the image. I think. (Carsten?)
      
         For other (eg. embedded) systems, you may have a very large non-
         volatile filesystem. If you have to have struct pages for this, then
         your RAM consumption will go up proportionally to fs size. Even
         though it is just a small proportion, the RAM can be much more costly
         eg in terms of power, so every KB less that Linux uses makes it more
         attractive to a lot of these guys.
      
      2. VM_MIXEDMAP allows us to support mappings where you actually do want
         to refcount _some_ pages in the mapping, but not others, and support
         COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM
         filesystem in progress. Future iterations of this filesystem will
         most likely want to migrate pages between pagecache and XIP backing,
         which is where the requirement for mixed (some refcounted, some not)
         comes from.
      
      3. pte_special also has a peripheral usage that I need for my lockless
         get_user_pages patch. That was shown to speed up "oltp" on db2 by
         10% on a 2 socket system, which is kind of significant because they
         scrounge for months to try to find 0.1% improvement on these
         workloads. I'm hoping we might finally be faster than AIX on
         pSeries with this :). My reference to lockless get_user_pages is not
         meant to justify this patchset (which doesn't include lockless gup),
         but just to show that pte_special is not some s390 specific thing that
         should be hidden in arch code or xip code: I definitely want to use it
         on at least x86 and powerpc as well.
      
      This patch:
      
      Introduce a new type of mapping, VM_MIXEDMAP.  This is unlike VM_PFNMAP in
      that it can support COW mappings of arbitrary ranges including ranges without
      struct page *and* ranges with a struct page that we actually want to refcount
      (PFNMAP can only support COW in those cases where the un-COW-ed translations
      are mapped linearly in the virtual address, and can only support non
      refcounted ranges).
      
      VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not
      refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it
      needs to avoid refcounting pfn_valid pages eg.  for /dev/mem mappings).
      Signed-off-by: NJared Hulbert <jaredeh@gmail.com>
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Acked-by: NCarsten Otte <cotte@de.ibm.com>
      Cc: Jared Hulbert <jaredeh@gmail.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b379d790
    • P
      smaps: account swap entries · 214e471f
      Peter Zijlstra 提交于
      Show the amount of swap for each vma.  This can be used to see where all the
      swap goes.
      
      [akpm@linux-foundation.org: coding-style fixes]
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Acked-by: NMatt Mackall <mpm@selenic.com>
      Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      214e471f
    • C
      PAGEFLAGS_EXTENDED and separate page flags for Head and Tail · e20b8cca
      Christoph Lameter 提交于
      Having separate page flags for the head and the tail of a compound page allows
      the compiler to use bitops instead of operations on a word to check for a tail
      page.  That is f.e.  important for virt_to_head_page() which is used in
      various critical code paths (kfree for example):
      
      Code for PageTail(page)
      
      Before:
      
       mov    (%rdi),%rdx		page->flags
       mov    %rdx,%rax		3 bytes
       and    $0x12000,%eax		5 bytes
       cmp    $0x12000,%rax		6 bytes
       je     897 <kfree+0xa7>
      
      After:
      
       mov    (%rdi),%rax
       test   $0x40,%ah			(3 bytes)
       jne    887 <kfree+0x97>
      
      So we go from 14 bytes to 3 bytes and from 3 instructions to one.  From the
      use of 2 registers we go to none.
      
      We can only use page flags for this if we have page flags available.  This
      patch introduces CONFIG_PAGEFLAGS_EXTENDED that is set if pageflags are not
      scarce due to SPARSEMEM using page flags for its sectionid on 32 bit NUMA
      platforms.
      
      Additional page flag definitions can be added to the CONFIG_PAGEFLAGS_EXTENDED
      section in page-flags.h if the functionality depends on PAGEFLAGS_EXTENDED or
      if more page flag overlapping tricks are used for the !PAGEFLAGS_EXTENDED
      fallback (the upcoming virtual compound patch may hook in here and Rik's/Lee's
      additional page flags to solve the reclaim issues could also be added there
      [hint...  hint...  where are these patchsets?]).
      
      Avoiding the overlaying of Pg_reclaim also clears the way for possible use of
      compound pages for the pagecache or on the LRU.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e20b8cca
    • C
      mm: Get rid of __ZONE_COUNT · 97965478
      Christoph Lameter 提交于
      It was used to compensate because MAX_NR_ZONES was not available to the
      #ifdefs.  Export MAX_NR_ZONES via the new mechanism and get rid of
      __ZONE_COUNT.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      97965478
    • C
      page flags: add PAGEFLAGS_FALSE for flags that are always false · ec7cade8
      Christoph Lameter 提交于
      Turns out that there are a number of times that a flag is simply always
      returning 0.  Define a macro for that.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ec7cade8
    • C
      page flags: handle PG_uncached like all other flags · 602c4d11
      Christoph Lameter 提交于
      Remove the special setup for PG_uncached and simply make it part of the enum.
      The page flag will only be allocated when the kernel build includes the
      uncached allocator.
      Acked-by: NDean Nelson <dcn@sgi.com>
      Cc: Jes Sorensen <jes@trained-monkey.org>
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      602c4d11
    • C
      pageflags: eliminate PG_xxx aliases · 0a128b2b
      Christoph Lameter 提交于
      Remove aliases of PG_xxx.  We can easily drop those now and alias by
      specifying the PG_xxx flag in the macro that generates the functions.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Jeremy Fitzhardinge <jeremy@goop.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0a128b2b
    • C
      pageflags: use proper page flag functions in Xen · d60cd46b
      Christoph Lameter 提交于
      Xen uses bitops to manipulate page flags.  Make it use proper page flag
      functions.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Jeremy Fitzhardinge <jeremy@goop.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d60cd46b
    • C
      pageflags: convert to the use of new macros · 6a1e7f77
      Christoph Lameter 提交于
      Replace explicit definitions of page flags through the use of macros.
      Significantly reduces the size of the definitions and removes a lot of
      opportunity for errors.  Additonal page flags can typically be generated with
      a single line.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Jeremy Fitzhardinge <jeremy@goop.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6a1e7f77
    • C
      pageflags: introduce macros to generate page flag functions · f94a62e9
      Christoph Lameter 提交于
      Introduce a set of macros that generate functions to handle page flags.
      
      A page flag function group typically starts with either
      
      	SETPAGEFLAG(<part of function name>,<part of PG_ flagname>)
      
      to create a set of page flag operations that are atomic. Or
      
      	__SETPAGEFLAG(<part of function name>,<part of PG_ flagname)
      
      to create a set of page flag operations that are not atomic.
      
      Then additional operations can be added using the following macros
      
      TESTSCFLAG		Create additional atomic test-and-set and
      			test-and-clear functions
      
      TESTSETFLAG		Create additional test and set function
      TESTCLEARFLAG		Create additional test and clear function
      SETPAGEFLAG		Create additional atomic set function
      CLEARPAGEFLAG		Create additional atomic clear function
      __TESTPAGEFLAG		Create additional non atomic set function
      __SETPAGEFLAG		Create additional non atomic clear function
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Jeremy Fitzhardinge <jeremy@goop.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f94a62e9
    • C
      pageflags: get rid of FLAGS_RESERVED · 9223b419
      Christoph Lameter 提交于
      NR_PAGEFLAGS specifies the number of page flags we are using.  From that we
      can calculate the number of bits leftover that can be used for zone, node (and
      maybe the sections id).  There is no need anymore for FLAGS_RESERVED if we use
      NR_PAGEFLAGS.
      
      Use the new methods to make NR_PAGEFLAGS available via the preprocessor.
      NR_PAGEFLAGS is used to calculate field boundaries in the page flags fields.
      These field widths have to be available to the preprocessor.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: David Miller <davem@davemloft.net>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Jeremy Fitzhardinge <jeremy@goop.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9223b419
    • C
      pageflags: use an enum for the flags · e2683181
      Christoph Lameter 提交于
      Use an enum to ease the maintenance of page flags.  This is going to change
      the numbering from 0 to 18.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Jeremy Fitzhardinge <jeremy@goop.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e2683181
    • C
      pageflags: standardize comment inclusion in asm-offsets.h and fix MIPS · bf2ae2b3
      Christoph Lameter 提交于
      Add the ability to pass comments into asm-offsets.h by generating asm
      output like
      
      -># comment line
      
      Mips needs this feature to preserve the comments that are in
      asm-mips/asm-offsets.h right now.
      
      Then remove the special handling for mips from Kbuild and convert mips to use
      the new string to include the comments.
      
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bf2ae2b3
    • A
      page_mapping(): add ifdef around reference to swapper_space · 726b8012
      Andrew Morton 提交于
      This fixes the superh build when the pageflags patches are applied.
      
      But it shouldn't unless it's a gcc bug.
      
      Cc: Christoph Lameter <clameter@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      726b8012
    • C
      kbuild: create a way to create preprocessor constants from C expressions · 1cdf25d7
      Christoph Lameter 提交于
      The use of enums create constants that are not available to the preprocessor
      when building the kernel (f.e.  MAX_NR_ZONES).
      
      Arch code already has a way to export constants calculated to the preprocessor
      through the asm-offsets.c file.  Generate something similar for the core
      kernel through kbuild.
      Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Jeremy Fitzhardinge <jeremy@goop.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1cdf25d7
    • C
      sparsemem: vmemmap does not need section bits · 308c05e3
      Christoph Lameter 提交于
      A set of patches that attempts to improve page flag handling.  First of all a
      method is introduced to generate the page flag functions using macros.  Then
      the number of page flags used by sparsemem is reduced.  All page flag
      operations will no longer be macros.  All flags will use inline function.
      
      Then we add a way to export enum constants to the preprocessor which allows us
      to get rid of __ZONE_COUNT and use the NR_PAGEFLAGS for the dynamic
      calculation of actually available page flags for fields.
      
      This patch:
      
      Sparsemem vmemmap does not need any section bits.  This patch has the effect
      of reducing the number of bits used in page->flags by at least 6.
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Jeremy Fitzhardinge <jeremy@goop.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      308c05e3
    • C
      vmallocinfo: add caller information · 23016969
      Christoph Lameter 提交于
      Add caller information so that /proc/vmallocinfo shows where the allocation
      request for a slice of vmalloc memory originated.
      
      Results in output like this:
      
      0xffffc20000000000-0xffffc20000801000 8392704 alloc_large_system_hash+0x127/0x246 pages=2048 vmalloc vpages
      0xffffc20000801000-0xffffc20000806000   20480 alloc_large_system_hash+0x127/0x246 pages=4 vmalloc
      0xffffc20000806000-0xffffc20000c07000 4198400 alloc_large_system_hash+0x127/0x246 pages=1024 vmalloc vpages
      0xffffc20000c07000-0xffffc20000c0a000   12288 alloc_large_system_hash+0x127/0x246 pages=2 vmalloc
      0xffffc20000c0a000-0xffffc20000c0c000    8192 acpi_os_map_memory+0x13/0x1c phys=cff68000 ioremap
      0xffffc20000c0c000-0xffffc20000c0f000   12288 acpi_os_map_memory+0x13/0x1c phys=cff64000 ioremap
      0xffffc20000c10000-0xffffc20000c15000   20480 acpi_os_map_memory+0x13/0x1c phys=cff65000 ioremap
      0xffffc20000c16000-0xffffc20000c18000    8192 acpi_os_map_memory+0x13/0x1c phys=cff69000 ioremap
      0xffffc20000c18000-0xffffc20000c1a000    8192 acpi_os_map_memory+0x13/0x1c phys=fed1f000 ioremap
      0xffffc20000c1a000-0xffffc20000c1c000    8192 acpi_os_map_memory+0x13/0x1c phys=cff68000 ioremap
      0xffffc20000c1c000-0xffffc20000c1e000    8192 acpi_os_map_memory+0x13/0x1c phys=cff68000 ioremap
      0xffffc20000c1e000-0xffffc20000c20000    8192 acpi_os_map_memory+0x13/0x1c phys=cff68000 ioremap
      0xffffc20000c20000-0xffffc20000c22000    8192 acpi_os_map_memory+0x13/0x1c phys=cff68000 ioremap
      0xffffc20000c22000-0xffffc20000c24000    8192 acpi_os_map_memory+0x13/0x1c phys=cff68000 ioremap
      0xffffc20000c24000-0xffffc20000c26000    8192 acpi_os_map_memory+0x13/0x1c phys=e0081000 ioremap
      0xffffc20000c26000-0xffffc20000c28000    8192 acpi_os_map_memory+0x13/0x1c phys=e0080000 ioremap
      0xffffc20000c28000-0xffffc20000c2d000   20480 alloc_large_system_hash+0x127/0x246 pages=4 vmalloc
      0xffffc20000c2d000-0xffffc20000c31000   16384 tcp_init+0xd5/0x31c pages=3 vmalloc
      0xffffc20000c31000-0xffffc20000c34000   12288 alloc_large_system_hash+0x127/0x246 pages=2 vmalloc
      0xffffc20000c34000-0xffffc20000c36000    8192 init_vdso_vars+0xde/0x1f1
      0xffffc20000c36000-0xffffc20000c38000    8192 pci_iomap+0x8a/0xb4 phys=d8e00000 ioremap
      0xffffc20000c38000-0xffffc20000c3a000    8192 usb_hcd_pci_probe+0x139/0x295 [usbcore] phys=d8e00000 ioremap
      0xffffc20000c3a000-0xffffc20000c3e000   16384 sys_swapon+0x509/0xa15 pages=3 vmalloc
      0xffffc20000c40000-0xffffc20000c61000  135168 e1000_probe+0x1c4/0xa32 phys=d8a20000 ioremap
      0xffffc20000c61000-0xffffc20000c6a000   36864 _xfs_buf_map_pages+0x8e/0xc0 vmap
      0xffffc20000c6a000-0xffffc20000c73000   36864 _xfs_buf_map_pages+0x8e/0xc0 vmap
      0xffffc20000c73000-0xffffc20000c7c000   36864 _xfs_buf_map_pages+0x8e/0xc0 vmap
      0xffffc20000c7c000-0xffffc20000c7f000   12288 e1000e_setup_tx_resources+0x29/0xbe pages=2 vmalloc
      0xffffc20000c80000-0xffffc20001481000 8392704 pci_mmcfg_arch_init+0x90/0x118 phys=e0000000 ioremap
      0xffffc20001481000-0xffffc20001682000 2101248 alloc_large_system_hash+0x127/0x246 pages=512 vmalloc
      0xffffc20001682000-0xffffc20001e83000 8392704 alloc_large_system_hash+0x127/0x246 pages=2048 vmalloc vpages
      0xffffc20001e83000-0xffffc20002204000 3674112 alloc_large_system_hash+0x127/0x246 pages=896 vmalloc vpages
      0xffffc20002204000-0xffffc2000220d000   36864 _xfs_buf_map_pages+0x8e/0xc0 vmap
      0xffffc2000220d000-0xffffc20002216000   36864 _xfs_buf_map_pages+0x8e/0xc0 vmap
      0xffffc20002216000-0xffffc2000221f000   36864 _xfs_buf_map_pages+0x8e/0xc0 vmap
      0xffffc2000221f000-0xffffc20002228000   36864 _xfs_buf_map_pages+0x8e/0xc0 vmap
      0xffffc20002228000-0xffffc20002231000   36864 _xfs_buf_map_pages+0x8e/0xc0 vmap
      0xffffc20002231000-0xffffc20002234000   12288 e1000e_setup_rx_resources+0x35/0x122 pages=2 vmalloc
      0xffffc20002240000-0xffffc20002261000  135168 e1000_probe+0x1c4/0xa32 phys=d8a60000 ioremap
      0xffffc20002261000-0xffffc2000270c000 4894720 sys_swapon+0x509/0xa15 pages=1194 vmalloc vpages
      0xffffffffa0000000-0xffffffffa0022000  139264 module_alloc+0x4f/0x55 pages=33 vmalloc
      0xffffffffa0022000-0xffffffffa0029000   28672 module_alloc+0x4f/0x55 pages=6 vmalloc
      0xffffffffa002b000-0xffffffffa0034000   36864 module_alloc+0x4f/0x55 pages=8 vmalloc
      0xffffffffa0034000-0xffffffffa003d000   36864 module_alloc+0x4f/0x55 pages=8 vmalloc
      0xffffffffa003d000-0xffffffffa0049000   49152 module_alloc+0x4f/0x55 pages=11 vmalloc
      0xffffffffa0049000-0xffffffffa0050000   28672 module_alloc+0x4f/0x55 pages=6 vmalloc
      
      [akpm@linux-foundation.org: coding-style fixes]
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Hugh Dickins <hugh@veritas.com>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      23016969
    • C
      vmalloc: show vmalloced areas via /proc/vmallocinfo · a10aa579
      Christoph Lameter 提交于
      Implement a new proc file that allows the display of the currently allocated
      vmalloc memory.
      
      It allows to see the users of vmalloc.  That is important if vmalloc space is
      scarce (i386 for example).
      
      And it's going to be important for the compound page fallback to vmalloc.
      Many of the current users can be switched to use compound pages with fallback.
       This means that the number of users of vmalloc is reduced and page tables no
      longer necessary to access the memory.  /proc/vmallocinfo allows to review how
      that reduction occurs.
      
      If memory becomes fragmented and larger order allocations are no longer
      possible then /proc/vmallocinfo allows to see which compound page allocations
      fell back to virtual compound pages.  That is important for new users of
      virtual compound pages.  Such as order 1 stack allocation etc that may
      fallback to virtual compound pages in the future.
      
      /proc/vmallocinfo permissions are made readable-only-by-root to avoid possible
      information leakage.
      
      [akpm@linux-foundation.org: coding-style fixes]
      [akpm@linux-foundation.org: CONFIG_MMU=n build fix]
      Signed-off-by: NChristoph Lameter <clameter@sgi.com>
      Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Hugh Dickins <hugh@veritas.com>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Cc: Arjan van de Ven <arjan@infradead.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a10aa579
    • A
      mm: make early_pfn_to_nid() a C function · b4544568
      Andrew Morton 提交于
      Fix this (sparc64)
      
      mm/sparse-vmemmap.c: In function `vmemmap_verify':
      mm/sparse-vmemmap.c:64: warning: unused variable `pfn'
      
      by switching to a C function which touches its arg.
      
      (reason 3,555 why macros are bad)
      
      Also, the `nid' arg was misnamed.
      Reviewed-by: NChristoph Lameter <clameter@sgi.com>
      Acked-by: NAndy Whitcroft <apw@shadowen.org>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Andi Kleen <ak@suse.de>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b4544568
    • M
      mm: rotate_reclaimable_page() cleanup · ac6aadb2
      Miklos Szeredi 提交于
      Clean up messy conditional calling of test_clear_page_writeback() from both
      rotate_reclaimable_page() and end_page_writeback().
      
      The only user of rotate_reclaimable_page() is end_page_writeback() so this is
      OK.
      Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ac6aadb2
    • S
      mm/page_alloc.c: fix indentation · f05111f5
      S.Caglar Onur 提交于
      zlc_setup(): handle jiffies wraparound
      (10ed273f) changes tab with spaces
      Signed-off-by: NS.Caglar Onur <caglar@pardus.org.tr>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      Cc: Paul Jackson <pj@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f05111f5
    • A
      mm: save some bytes in mm_struct by filling holes on 64bit · 7edf85aa
      Andi Kleen 提交于
      Save some bytes in mm_struct by filling holes
      
      Putting int values together for better packing on 64bit shrinks sizeof(struct
      mm_struct) from 776 bytes to 764 bytes.
      Signed-off-by: NAndi Kleen <ak@suse.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7edf85aa
    • A
      dmapool: enable debugging for CONFIG_SLUB_DEBUG_ON too · b5ee5bef
      Andi Kleen 提交于
      Previously it was only enabled for CONFIG_DEBUG_SLAB.
      
      Not hooked into the slub runtime debug configuration, so you currently only
      get it with CONFIG_SLUB_DEBUG_ON, not plain CONFIG_SLUB_DEBUG
      Acked-by: NMatthew Wilcox <willy@linux.intel.com>
      Signed-off-by: NAndi Kleen <ak@suse.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b5ee5bef
    • L
      mempolicy: fix parsing of tmpfs mpol mount option · a43361cf
      Lee Schermerhorn 提交于
      Parsing of new mode flags in the tmpfs mpol mount option is slightly broken:
      
      Setting a valid flag works OK:
      	#mount -o remount,mpol=bind=static:1-2 /dev/shm
      	#mount
      	...
      	tmpfs on /dev/shm type tmpfs (rw,mpol=bind=static:1-2)
      	...
      
      However, we can't remove them or change them, once we've
      set a valid flag:
      
      	#mount -o remount,mpol=bind:1-2 /dev/shm
      	#mount
      	...
      	tmpfs on /dev/shm type tmpfs (rw,mpol=bind:1-2)
      	...
      
      It SAYS it removed it, but that's just a copy of the input
      string.  If we now try to set it to a different flag, we
      get:
      
      	#mount -o remount,mpol=bind=relative:1-2 /dev/shm
      	mount: /dev/shm not mounted already, or bad option
      
      And on the console, we see:
      	tmpfs: Bad value 'bind' for mount option 'mpol'
      	                      ^ lost remainder of string
      
      Furthermore, bogus flags are accepted with out error.
      Granted, they are a no-op:
      
      	#mount -o remount,mpol=interleave=foo:0-3 /dev/shm
      	#mount
      	...
      	tmpfs on /dev/shm type tmpfs (rw,mpol=interleave=foo:0-3)
      
      Again, that's just a copy of the input string shown by the mount command.
      
      This patch fixes the behavior by pre-zeroing the flags so that only one of the
      mutually exclusive flags can be set at one time.  It also reports an error
      when an unrecognized flag is specified.
      
      The check for both flags being set is removed because it can't happen with
      this implementation.  If we ever want to support multiple non-exclusive flags,
      this area will need rework and we will need to check that any mutually
      exclusive flags aren't specified.
      Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: Eric Whitney <eric.whitney@hp.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a43361cf
    • D
      mempolicy: disallow static or relative flags for local preferred mode · 3e1f0645
      David Rientjes 提交于
      MPOL_F_STATIC_NODES and MPOL_F_RELATIVE_NODES don't mean anything for
      MPOL_PREFERRED policies that were created with an empty nodemask (for purely
      local allocations).  They'll never be invalidated because the allowed mems of
      a task changes or need to be rebound relative to a cpuset's placement.
      
      Also fixes a bug identified by Lee Schermerhorn that disallowed empty
      nodemasks to be passed to MPOL_PREFERRED to specify local allocations.  [A
      different, somewhat incomplete, patch already existed in 25-rc5-mm1.]
      
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: Randy Dunlap <randy.dunlap@oracle.com>
      Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3e1f0645
    • D
      mempolicy: small header file cleanup · 3842b46d
      David Rientjes 提交于
      Removes forward definition of vm_area_struct in linux/mempolicy.h.  We already
      get it from the linux/slab.h -> linux/gfp.h include.
      
      Removes the unused mpol_set_vma_default() macro from linux/mempolicy.h.
      
      Removes the extern definition of default_policy since it is only referenced,
      as it should be, in mm/mempolicy.c.
      
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      Cc: Andi Kleen <ak@suse.de>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3842b46d
    • D
      mempolicy: create mempolicy_operations structure · 37012946
      David Rientjes 提交于
      Create a mempolicy_operations structure that currently points to two
      functions[*] for the various modes:
      
      	int (*create)(struct mempolicy *, const nodemask_t *);
      	void (*rebind)(struct mempolicy *, const nodemask_t *);
      
      This splits the implementation for the various modes out of two large
      functions, mpol_new() and mpol_rebind_policy().  Eventually it may be
      beneficial to add additional functions to accomodate the existing switch()
      statements in mm/mempolicy.c.
      
       [*] The ->create() function for MPOL_DEFAULT is currently NULL since no
           struct mempolicy is dynamically allocated.
      
      [Lee.Schermerhorn@hp.com: fix regression in the package mempolicy regression tests]
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Andi Kleen <ak@suse.de>
      Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
      Cc: Eric Whitney <eric.whitney@hp.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      37012946
    • D
      mempolicy: move rebind functions · 1d0d2680
      David Rientjes 提交于
      Move the mpol_rebind_{policy,task,mm}() functions after mpol_new() to avoid
      having to declare function prototypes.
      
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      Cc: Andi Kleen <ak@suse.de>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1d0d2680
    • D
      mempolicy: update NUMA memory policy documentation · 65d66fc0
      David Rientjes 提交于
      Updates Documentation/vm/numa_memory_policy.txt and
      Documentation/filesystems/tmpfs.txt to describe optional mempolicy mode flags.
      
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: Randy Dunlap <randy.dunlap@oracle.com>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NPaul Jackson <pj@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      65d66fc0
    • D
      mempolicy: add MPOL_F_RELATIVE_NODES flag · 4c50bc01
      David Rientjes 提交于
      Adds another optional mode flag, MPOL_F_RELATIVE_NODES, that specifies
      nodemasks passed via set_mempolicy() or mbind() should be considered relative
      to the current task's mems_allowed.
      
      When the mempolicy is created, the passed nodemask is folded and mapped onto
      the current task's mems_allowed.  For example, consider a task using
      set_mempolicy() to pass MPOL_INTERLEAVE | MPOL_F_RELATIVE_NODES with a
      nodemask of 1-3.  If current's mems_allowed is 4-7, the effected nodemask is
      5-7 (the second, third, and fourth node of mems_allowed).
      
      If the same task is attached to a cpuset, the mempolicy nodemask is rebound
      each time the mems are changed.  Some possible rebinds and results are:
      
      	mems			result
      	1-3			1-3
      	1-7			2-4
      	1,5-6			1,5-6
      	1,5-7			5-7
      
      Likewise, the zonelist built for MPOL_BIND acts on the set of zones assigned
      to the resultant nodemask from the relative remap.
      
      In the MPOL_PREFERRED case, the preferred node is remapped from the currently
      effected nodemask to the relative nodemask.
      
      This mempolicy mode flag was conceived of by Paul Jackson <pj@sgi.com>.
      
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      Cc: Andi Kleen <ak@suse.de>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4c50bc01
    • P
      mempolicy: add bitmap_onto() and bitmap_fold() operations · 7ea931c9
      Paul Jackson 提交于
      The following adds two more bitmap operators, bitmap_onto() and bitmap_fold(),
      with the usual cpumask and nodemask wrappers.
      
      The bitmap_onto() operator computes one bitmap relative to another.  If the
      n-th bit in the origin mask is set, then the m-th bit of the destination mask
      will be set, where m is the position of the n-th set bit in the relative mask.
      
      The bitmap_fold() operator folds a bitmap into a second that has bit m set iff
      the input bitmap has some bit n set, where m == n mod sz, for the specified sz
      value.
      
      There are two substantive changes between this patch and its
      predecessor bitmap_relative:
       1) Renamed bitmap_relative() to be bitmap_onto().
       2) Added bitmap_fold().
      
      The essential motivation for bitmap_onto() is to provide a mechanism for
      converting a cpuset-relative CPU or Node mask to an absolute mask.  Cpuset
      relative masks are written as if the current task were in a cpuset whose CPUs
      or Nodes were just the consecutive ones numbered 0..N-1, for some N.  The
      bitmap_onto() operator is provided in anticipation of adding support for the
      first such cpuset relative mask, by the mbind() and set_mempolicy() system
      calls, using a planned flag of MPOL_F_RELATIVE_NODES.  These bitmap operators
      (and their nodemask wrappers, in particular) will be used in code that
      converts the user specified cpuset relative memory policy to a specific system
      node numbered policy, given the current mems_allowed of the tasks cpuset.
      
      Such cpuset relative mempolicies will address two deficiencies
      of the existing interface between cpusets and mempolicies:
       1) A task cannot at present reliably establish a cpuset
          relative mempolicy because there is an essential race
          condition, in that the tasks cpuset may be changed in
          between the time the task can query its cpuset placement,
          and the time the task can issue the applicable mbind or
          set_memplicy system call.
       2) A task cannot at present establish what cpuset relative
          mempolicy it would like to have, if it is in a smaller
          cpuset than it might have mempolicy preferences for,
          because the existing interface only allows specifying
          mempolicies for nodes currently allowed by the cpuset.
      
      Cpuset relative mempolicies are useful for tasks that don't distinguish
      particularly between one CPU or Node and another, but only between how many of
      each are allowed, and the proper placement of threads and memory pages on the
      various CPUs and Nodes available.
      
      The motivation for the added bitmap_fold() can be seen in the following
      example.
      
      Let's say an application has specified some mempolicies that presume 16 memory
      nodes, including say a mempolicy that specified MPOL_F_RELATIVE_NODES (cpuset
      relative) nodes 12-15.  Then lets say that application is crammed into a
      cpuset that only has 8 memory nodes, 0-7.  If one just uses bitmap_onto(),
      this mempolicy, mapped to that cpuset, would ignore the requested relative
      nodes above 7, leaving it empty of nodes.  That's not good; better to fold the
      higher nodes down, so that some nodes are included in the resulting mapped
      mempolicy.  In this case, the mempolicy nodes 12-15 are taken modulo 8 (the
      weight of the mems_allowed of the confining cpuset), resulting in a mempolicy
      specifying nodes 4-7.
      Signed-off-by: NPaul Jackson <pj@sgi.com>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
      Cc: <kosaki.motohiro@jp.fujitsu.com>
      Cc: <ray-lk@madrabbit.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7ea931c9
    • D
      mempolicy: add MPOL_F_STATIC_NODES flag · f5b087b5
      David Rientjes 提交于
      Add an optional mempolicy mode flag, MPOL_F_STATIC_NODES, that suppresses the
      node remap when the policy is rebound.
      
      Adds another member to struct mempolicy, nodemask_t user_nodemask, as part of
      a union with cpuset_mems_allowed:
      
      	struct mempolicy {
      		...
      		union {
      			nodemask_t cpuset_mems_allowed;
      			nodemask_t user_nodemask;
      		} w;
      	}
      
      that stores the the nodemask that the user passed when he or she created the
      mempolicy via set_mempolicy() or mbind().  When using MPOL_F_STATIC_NODES,
      which is passed with any mempolicy mode, the user's passed nodemask
      intersected with the VMA or task's allowed nodes is always used when
      determining the preferred node, setting the MPOL_BIND zonelist, or creating
      the interleave nodemask.  This happens whenever the policy is rebound,
      including when a task's cpuset assignment changes or the cpuset's mems are
      changed.
      
      This creates an interesting side-effect in that it allows the mempolicy
      "intent" to lie dormant and uneffected until it has access to the node(s) that
      it desires.  For example, if you currently ask for an interleaved policy over
      a set of nodes that you do not have access to, the mempolicy is not created
      and the task continues to use the previous policy.  With this change, however,
      it is possible to create the same mempolicy; it is only effected when access
      to nodes in the nodemask is acquired.
      
      It is also possible to mount tmpfs with the static nodemask behavior when
      specifying a node or nodemask.  To do this, simply add "=static" immediately
      following the mempolicy mode at mount time:
      
      	mount -o remount mpol=interleave=static:1-3
      
      Also removes mpol_check_policy() and folds its logic into mpol_new() since it
      is now obsoleted.  The unused vma_mpol_equal() is also removed.
      
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      Cc: Andi Kleen <ak@suse.de>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f5b087b5
    • D
      mempolicy: support optional mode flags · 028fec41
      David Rientjes 提交于
      With the evolution of mempolicies, it is necessary to support mempolicy mode
      flags that specify how the policy shall behave in certain circumstances.  The
      most immediate need for mode flag support is to suppress remapping the
      nodemask of a policy at the time of rebind.
      
      Both the mempolicy mode and flags are passed by the user in the 'int policy'
      formal of either the set_mempolicy() or mbind() syscall.  A new constant,
      MPOL_MODE_FLAGS, represents the union of legal optional flags that may be
      passed as part of this int.  Mempolicies that include illegal flags as part of
      their policy are rejected as invalid.
      
      An additional member to struct mempolicy is added to support the mode flags:
      
      	struct mempolicy {
      		...
      		unsigned short policy;
      		unsigned short flags;
      	}
      
      The splitting of the 'int' actual passed by the user is done in
      sys_set_mempolicy() and sys_mbind() for their respective syscalls.  This is
      done by intersecting the actual with MPOL_MODE_FLAGS, rejecting the syscall of
      there are additional flags, and storing it in the new 'flags' member of struct
      mempolicy.  The intersection of the actual with ~MPOL_MODE_FLAGS is stored in
      the 'policy' member of the struct and all current users of pol->policy remain
      unchanged.
      
      The union of the policy mode and optional mode flags is passed back to the
      user in get_mempolicy().
      
      This combination of mode and flags within the same actual does not break
      userspace code that relies on get_mempolicy(&policy, ...) and either
      
      	switch (policy) {
      	case MPOL_BIND:
      		...
      	case MPOL_INTERLEAVE:
      		...
      	};
      
      statements or
      
      	if (policy == MPOL_INTERLEAVE) {
      		...
      	}
      
      statements.  Such applications would need to use optional mode flags when
      calling set_mempolicy() or mbind() for these previously implemented statements
      to stop working.  If an application does start using optional mode flags, it
      will need to mask the optional flags off the policy in switch and conditional
      statements that only test mode.
      
      An additional member is also added to struct shmem_sb_info to store the
      optional mode flags.
      
      [hugh@veritas.com: shmem mpol: fix build warning]
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      Cc: Andi Kleen <ak@suse.de>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NHugh Dickins <hugh@veritas.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      028fec41
    • D
      mempolicy: convert MPOL constants to enum · a3b51e01
      David Rientjes 提交于
      The mempolicy mode constants, MPOL_DEFAULT, MPOL_PREFERRED, MPOL_BIND, and
      MPOL_INTERLEAVE, are better declared as part of an enum since they are
      sequentially numbered and cannot be combined.
      
      The policy member of struct mempolicy is also converted from type short to
      type unsigned short.  A negative policy does not have any legitimate meaning,
      so it is possible to change its type in preparation for adding optional mode
      flags later.
      
      The equivalent member of struct shmem_sb_info is also changed from int to
      unsigned short.
      
      For compatibility, the policy formal to get_mempolicy() remains as a pointer
      to an int:
      
      	int get_mempolicy(int *policy, unsigned long *nmask,
      			  unsigned long maxnode, unsigned long addr,
      			  unsigned long flags);
      
      although the only possible values is the range of type unsigned short.
      
      Cc: Paul Jackson <pj@sgi.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      Cc: Andi Kleen <ak@suse.de>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a3b51e01
    • P
      mm: move cache_line_size() to <linux/cache.h> · 1b27d05b
      Pekka Enberg 提交于
      Not all architectures define cache_line_size() so as suggested by Andrew move
      the private implementations in mm/slab.c and mm/slob.c to <linux/cache.h>.
      
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Reviewed-by: NChristoph Lameter <clameter@sgi.com>
      Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1b27d05b
    • A
      hugetlb: decrease hugetlb_lock cycling in gather_surplus_huge_pages · 19fc3f0a
      Adam Litke 提交于
      To reduce hugetlb_lock acquisitions and releases when freeing excess surplus
      pages, scan the page list in two parts.  First, transfer the needed pages to
      the hugetlb pool.  Then drop the lock and free the remaining pages back to the
      buddy allocator.
      
      In the common case there are zero excess pages and no lock operations are
      required.
      
      Thanks Mel Gorman for this improvement.
      Signed-off-by: NAdam Litke <agl@us.ibm.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: Dave Hansen <haveblue@us.ibm.com>
      Cc: William Lee Irwin III <wli@holomorphy.com>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: David Gibson <david@gibson.dropbear.id.au>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      19fc3f0a
    • C
      mm: try both endianess when checking for endianess · 797df574
      Chris Dearman 提交于
      When checking for the swap header try byteswapping the endianess dependent
      fields to allow the swap partition to be shared between big & little endian
      systems.
      Signed-off-by: NChris Dearman <chris@mips.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      Acked-by: NHugh Dickins <hugh@veritas.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      797df574