This patch decouples and moves vendors specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libmlx5) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When LAG is active, QP tx affinity (the physical port
to which a QP is affined, or the TIS in case of raw-eth)
is set in a round robin fashion during state transition
from RESET to INIT.
Signed-off-by: NAviv Heller <avivh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Track asynchronous events on a receive work queue by using the
mlx5_core_create_rq_tracked API.

In case a fatal error has occurred letting the IB layer know about by
using the ib_wq event handler.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Counters weren't updated due to raw packet QPs' traffic since the
counter-id was not associated with the QP. Added support for
associating the q-counter-id with the raw packet QP. The attachment
is done only when changing RQ raw packet QP state from RST to INIT
in modify-RQ command. FW support is required for the above, without
this support raw packet QP counters will not count.
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Added a struct for modifying raw QP, this will allow modifying
multiple parameters in raw packet QP RQ and can also be used for
SQ in the future.
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Now as all commands use mlx5 ifc interface, instead of doing two calls
for executing a command we embed command status checking into
mlx5_cmd_exec to simplify the interface.

Also we do here some cleanup for redundant software structures
(inbox/outbox) and functions and improved command failure output.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Prior to this patch we assumed that modify QP commands have the
same layout.

In ConnectX-4 for each QP transition there is a specific command
and their layout can vary.

e.g: 2err/2rst commands don't have QP context in their layout and before
this patch we posted the QP context in those commands.

Fortunately the FW only checks the suffix of the commands and executes
them, while ignoring all invalid data sent after the valid command
layout.

This patch removes mlx5_modify_qp_mbox_in and changes
mlx5_core_qp_modify to receive the required transition and QP context
with opt_param_mask if needed.  This way the caller is not required to
provide the command inbox layout and it will be generated automatically.

mlx5_core_qp_modify will generate the command inbox/outbox layouts
according to the requested transition and will fill the requested
parameters.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Remove old representation of manually created QP/XRCD commands layout
amd use mlx5_ifc canonical structures and defines.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Remove old representation of manually created MKey/PSV commands layout,
and use mlx5_ifc canonical structures and defines.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

The q-counter-id is given in modify-QP command associates
the QP with the counter. The offset to which the counter
ID was set is incorrect, causing IB port counters not to
count on QP.

Fixes: 0837e86a ('IB/mlx5: Add per port counters')
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Tested-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support statistics for ports, we attach
each QP to a counter set which is dedicate to this port.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The driver exposes interfaces that directly relate to HW state.
Upon fatal error, consumers of these interfaces (ULPs) that rely
on completion of all their posted work-request could hang, thereby
introducing dependencies in shutdown order. To prevent this from
happening, we manage the relevant resources (CQs, QPs) that are used
by the device. Upon a fatal error, we now generate simulated
completions for outstanding WQEs that were not completed at the
time the HW was reset.

It includes invoking the completion event handler for all involved
CQs so that the ULPs will poll those CQs. When polled we return
simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs
to clean up their  resources and not wait forever for completions
upon receiving remove_one.

The above change requires an extra check in the data path to make
sure that when device is in error state, the simulated CQEs will
be returned and no further WQEs will be posted.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for Raw Ethernet RX HASH QP. Currently, creation and
destruction of such a QP are supported. This QP is implemented as
a simple TIR object which points to the receive RQ indirection table.
The given hashing configuration is used to configure the TIR and by
that it chooses the right RQ from the RQ indirection table.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some mlx5 based hardwares support a RQ table object. This RQ table
points to a few RQ objects. We implement the receive work queue
indirection table API (create and destroy) by using this hardware
object.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

A QP can be created without internal WQs "packaged" inside it,
this QP can be configured to use "external" WQ object as its
receive/send queue.

WQ is a necessary component for RSS technology since RSS mechanism
is supposed to distribute the traffic between multiple
Receive Work Queues

Receive WQs are implemented by RQs.

Implement the WQ creation, modification and destruction verbs.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If the caller specified IB_SEND_FENCE in the send flags of the work
request and no previous work request stated that the successive one
should be fenced, the work request would be executed without a fence.
This could result in RDMA read or atomic operations failure due to a MR
being invalidated. Fix this by adding the mlx5 enumeration for fencing
RDMA/atomic operations and fix the logic to apply this.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Userspace flag IBV_QP_ALT_PATH is supposed to set the alternate path
including fields alt_pkey_index and alt_timeout.
Added IB_QP_PKEY_INDEX and IB_QP_TIMEOUT to the attribute mask when
calling mlx5_set_path for the alternate path to force setting the
alt_pkey_index and alt_timeout values.

Fixes: bf24481a3a7c4 ('IB/mlx5: Consider alternate path in pkey ...')
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Pkey index fields in the QP context path record are extended to 16
bits, as required by IB spec (version 1.3).
This change affects all QP commands which include path records.

To enable this change, moved the free adaptive routing flag bit
(free_ar) to the most significant byte of the QP path record.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB ...')
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some variables were not initialized properly: max_recv_wr,
max_recv_sge, max_send_wr, qp_context and max_inline_data.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB...')
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enable Scatter FCS in the RQ context when the user passes
Scatter FCS create flag.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allocate proper context for arbitrary scatterlist registration
If ib_alloc_mr is called with IB_MR_MAP_ARB_SG, the driver
allocate a private klm list instead of a private page list.
Set the UMR wqe correctly when posting the fast registration.

Also, expose device cap IB_DEVICE_MAP_ARB_SG according to the
device id (until we have a FW bit that correctly exposes it).
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds support for re-registration of memory regions in MLX5.
The functionality is basically the same as deregister followed by
register, but attempts to reuse the existing resources as much as
possible.
Original memory keys are kept if possible, saving the need to
communicate new ones to remote peers.
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

mlx5 creates special GSI QPs that has limited ability to control the P_Key
of transmitted packets. The sent P_Key is taken from the QP object,
similarly to what happens with regular UD QPs.

Create a software wrapper around GSI QPs that with the following patches
will be able to emulate the functionality of a GSI QP including control of
the P_Key per work request.
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add debugging prints to the modify QP verb to help understand the cause a
returned error.
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to create multiple GSI QPs, we need to set the source QP number to
one on all these QPs. Add the necessary definitions and infrastructure to
do that.
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support LSO and CSUM in the TX flow the driver does the
following:
* LSO bit for the enum mlx5_ib_qp_flags was added, indicates QP that
  supports LSO offloads.
* Enables the special offload when the QP is created, and enable the
  special work request id (IB_WR_LSO) when comes.
* Calculates the size of the WQE according to the new WQE format that
  support these offloads.
* Handles the new WQE format when arrived, sets the relevant
  fields, and copies the needed data.
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix the RC QPs send queue overhead computation to take into account
two additional segments in the WQE which are needed for registration
operations.

The ATOMIC and UMR segments can't coexist together, so chose maximum out
of them.

The commit 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead
computation") was intended to update RC transport as commit messages
states, but added the code to UC transport.

Fixes: 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead computation")
Signed-off-by: NKamal Heib <kamalh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

MLX5_GET64 was used on end_padding_mode, which is a 2-bit field.
This is wrong as the calculated offset is incorrect. Using MLX5_GET
instead of MLX5_GET64 to fix that.

Fixes: 0fb2ed66 ('IB/mlx5: Add create and destroy functionality
                     for Raw Packet QP')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When a Raw Ethernet QP is created, a NULL pointer PD could be used.
Fixing that by only using the PD after validating it's valid.
smatch also reported this error:
drivers/infiniband/hw/mlx5/qp.c:1629 mlx5_ib_create_qp()
	 error: we previously assumed 'pd' could be null (see line 1616)

Fixes: 0fb2ed66 ('IB/mlx5: Add create and destroy functionality for Raw Packet QP')
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Added Raw Packet QP modify functionality which will enable user
space consumers to use it.

Since Raw Packet QP is built of SQ and RQ sub-objects, therefore
Raw Packet QP state changes are implemented by changing the state
of the sub-objects.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When modifying a QP, the desired operation was determined in
the mlx5_core using a transition table that takes the current
state, the final state, and returns the desired operation.

Since this logic will be used for Raw Packet QP, move the
operation table to the mlx5_ib.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When the user changes the Address Vector(AV) in the modify QP, he
provides an SL. This SL should be translated to Ethernet Priority
by taking the 3 LSB bits, and modify the QP's TIS according to this
Ethernet priority.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Since Raw Packet QP is composed of RQ and SQ, the IB QP's
state is derived from the sub-objects. Therefore we need
to query each one of the sub-objects, and decide on the
IB QP's state.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds support for Raw Packet QP for the mlx5 device.

Raw Packet QP, unlike other QP types, has no matching mlx5_core_qp
object but rather it is built of RQ/SQ/TIR/TIS/TD mlx5_core object.

Since the SQ and RQ work-queue (WQ) buffers are not contiguous like
other QPs, we allocate separate buffers in the user-space and pass
the address of each one of them separately to the kernel.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Extract specific IB QP fields to mlx5_ib_qp_trans structure.
The mlx5_core QP object resides in mlx5_ib_qp_base, which all QP types
inherit from. When we need to find mlx5_ib_qp using mlx5_core QP
(event handling and co), we use a pointer that resides in
mlx5_ib_qp_base.

In addition, we delete all redundant fields that weren't used anywhere
in the code:
-doorbell_qpn
-sq_max_wqes_per_wr
-sq_spare_wqes
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enforce working with CQE version 1 when the user supports CQE
version 1 and asked to work this way.

If the user still works with CQE version 0, then use the default
CQE version to tell the Firmware that the user still works in the
older mode.

After this patch, the kernel still reports CQE version 0.
Signed-off-by: NHaggai Abramovsky <hagaya@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support of cross-channel functionality to mlx5
driver. This includes ability to ignore overrun for CQ
which intended for cross-channel, export device capability and
configure the QP to be sync master/slave queues.

The cross-channel enabled QP supports combination of
three possible properties:
* WQE processing on the receive queue of this QP
* WQE processing on the send queue of this QP
* WQE are supported on the send queue
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set the address handle and QP address path fields according to the
link layer type (IB/Eth).
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

No ULP uses it anymore, go ahead and remove it.
Keep only the local invalidate part of the handlers.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Support the new memory registration API by allocating a
private page list array in mlx5_ib_mr and populate it when
mlx5_ib_map_mr_sg is invoked. Also, support IB_WR_REG_MR
by setting the exact WQE as IB_WR_FAST_REG_MR, just take the
needed information from different places:
- page_size, iova, length, access flags (ib_mr)
- page array (mlx5_ib_mr)
- key (ib_reg_wr)

The IB_WR_FAST_REG_MR handlers will be removed later when
all the ULPs will be converted.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>