This allows a 48Hz clock to be selected on Malta and other systems.  Note
this not normally a sensible option as it results in rather high latencies
for some kernel stuff.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

To allow flexible configuration of IDE introduce HAVE_IDE.
All archs except arm, um and s390 unconditionally select it.
For arm the actual configuration determine if IDE is supported.

This is a step towards introducing drivers/Kconfig for arm.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NRussell King - ARM Linux <linux@arm.linux.org.uk>
Acked-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

After seeing the filename I'd have expected something about the
implementation of SMP in the Linux kernel - not some notes on kernel
configuration and building trivialities noone would search at this
place.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NAlan Cox <alan@redhat.com>

Move the instrumentation Kconfig to

arch/Kconfig for architecture dependent options
  - oprofile
  - kprobes

and

init/Kconfig for architecture independent options
  - profiling
  - markers

Remove the "Instrumentation Support" menu. Everything moves to "General setup".
Delete the kernel/Kconfig.instrumentation file.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Linus:
On the per-architecture side, I do think it would be better to *not* have
internal architecture knowledge in a generic file, and as such a line like

        depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32

really shouldn't exist in a file like kernel/Kconfig.instrumentation.

It would be much better to do

        depends on ARCH_SUPPORTS_KPROBES

in that generic file, and then architectures that do support it would just
have a

        bool ARCH_SUPPORTS_KPROBES
                default y

in *their* architecture files. That would seem to be much more logical,
and is readable both for arch maintainers *and* for people who have no
clue - and don't care - about which architecture is supposed to support
which interface...

Changelog:

Actually, I know I gave this as the magic incantation, but now that I see
it, I realize that I should have told you to just use

        config ARCH_SUPPORTS_KPROBES
                def_bool y

instead, which is a bit denser.

We seem to use both kinds of syntax for these things, but this is really
what "def_bool" is there for...

Changelog :

- Moving to HAVE_*.
- Add AVR32 oprofile.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This cleans up the suspend Kconfig and removes the need to
declare centrally which architectures support suspend. All
architectures that currently support suspend are modified
accordingly.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NRussell King <rmk@arm.linux.org.uk>
Acked-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

A HOWTO that hasn't been updated for half a dozen years no longer
"contains valuable information about which PCI hardware does work under
Linux and which doesn't".
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The break_lock data structure and code for spinlocks is quite nasty.
Not only does it double the size of a spinlock but it changes locking to
a potentially less optimal trylock.

Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a
__raw_spin_is_contended that uses the lock data itself to determine whether
there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is
not set.

Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to
decouple it from the spinlock implementation, and make it typesafe (rwlocks
do not have any need_lockbreak sites -- why do they even get bloated up
with that break_lock then?).
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

64-bits Cobalt kernels run fine.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The Qemu platform was originally implemented to have an easily supportable
platform until Qemu reaches a state where it emulates a real world system.
Since the latest release Qemu is capable of emulating the MIPSsim and
Malta platforms, so this goal has been reached.  The Qemu plaform is also
rather underfeatured so less useful than a Malta emulation.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Moved the eXcite local config to excite directory.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A raw binary boots about twice as fast as SREC.

The possibility to generate SREC binaries remains by simply using the
vmlinux.srec target but seems only useful for the probably hypothetical
case where one of these systems is booted over a serial interface.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- EISA support for non PCI RMs (RM200 and RM400-xxx). The major part
  is the splitting of the EISA and onboard ISA of the RM200, which
  makes the EISA bus on the RM200 look like on other RMs.
- 64bit kernel support
- system type detection is now common for big and little endian
- moved sniprom code to arch/mips/fw
- added call_o32 function to arch/mips/fw/lib, which uses a private
  stack for calling prom functions
- fix problem with ISA interrupts, which makes using PIT clockevent
  possible
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add support for SGI IP28 machines (Indigo 2 with R10k CPUs)
This work is mainly based on Peter Fuersts work.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

According to Broadcom the PT systems are production test systems which
never reached customers so no need to keep the fragmentary support we
currently have.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Move registration into the actual platform code instead of making a
desparate attempt at sharing the hand full of likes of code in pcspeaker.c.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 This is the gereric part of R4000/R4400 errata workarounds.  They include 
compiler and assembler support as well as some source code modifications 
to address the problems with some combinations of multiply/divide+shift 
instructions as well as the daddi and daddiu instructions.

 Changes included are as follows:

1. New Kconfig options to select workarounds by platforms as necessary.

2. Arch top-level Makefile to pass necessary options to the compiler; also 
   incompatible configurations are detected (-mno-sym32 unsupported as 
   horribly intrusive for little gain).

3. Bug detection updated and shuffled -- the multiply/divide+shift problem 
   is lethal enough that if not worked around it makes the kernel crash in 
   time_init() because of a division by zero; the daddiu erratum might 
   also trigger early potentially, though I have not observed it.  On the 
   other hand the daddi detection code requires the exception subsystem to 
   have been initialised (and is there mainly for information).

4. r4k_daddiu_bug() added so that the existence of the erratum can be 
   queried by code at the run time as necessary; useful for generated code 
   like TLB fault and copy/clear page handlers.

5. __udelay() updated as it uses multiplication in inline assembly.

 Note that -mdaddi requires modified toolchain (which has been maintained 
by myself and available from my site for ~4years now -- versions covered 
are GCC 2.95.4 - 4.1.2 and binutils from 2.13 onwards).  The -mfix-r4000 
and -mfix-r4400 have been standard for a while though.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The merge of the code to use this was never completed so delete it for the
time being.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The functionality of the former dma-ip32.c has been folded into
dma-default.c.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The patch below fixes two problems for Kconfig on the BCM47xx platform:

- arch/mips/bcm47xx/gpio.c uses ssb_extif_* functions. Selecting
  SSB_DRIVER_EXTIF makes sure those functions are available.
- arch/mips/pci/pci.c needs, when enabled, platform specific functions,
  which are defined when SSB_PCICORE_HOSTMODE is enabled.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CONFIG_NO_HZ, CONFIG_HIGH_RES_TIMERS should be selected in "Kernel
type" menu, not in "CPU selection" menu.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The cleanup 09cadedb broke the oprofile
configuration for MIPS by allowing oprofile support to be built for
kernel models where oprofile doesn't have a chance in hell to work.

Just a dependecy list on a number of architectures is - surprise - broken
and should as per past discussions probably in most considered to be
broken in most cases.  So I introduce a dependency for the oprofile
configuration on ARCH_SUPPORTS_OPROFILE.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Sibyte SOCs only have 32-bit PCI.  Due to the sparse use of the address
space only the first 1GB of memory is mapped at physical addresses
below 1GB.  If a system has more than 1GB of memory 32-bit DMA will
not be able to reach all of it.

For now this patch is good enough to keep Sibyte users happy but it seems
eventually something like swiotlb will be needed for Sibyte.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In particular as-is it's not suited for multicore and mutiprocessors
systems where there is on guarantee that the counter are synchronized
or running from the same clock at all.  This broke Sibyte and probably
others since the "[MIPS] Handle R4000/R4400 mfc0 from count register."
commit.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Shadow register support would not possibly have worked on multicore
systems.  The support code for it was also depending not on MIPS R2 but
VSMP or SMTC kernels even though it makes perfect sense with UP kernels.

SR sets are a scarce resource and the expected usage pattern is that
users actually hardcode the register set numbers in their code.  So fix
the allocator by ditching it.  Move the remaining CPU probe bits into
the generic CPU probe.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Convert jmr3927_clock_event_device to more generic
txx9tmr_clock_event_device which supports one-shot mode.  The
txx9tmr_clock_event_device can be used for TX49 too if the cp0 timer
interrupt was not available.

Convert jmr3927_hpt_read to txx9_clocksource driver which does not
depends jiffies anymore.  The txx9_clocksource itself can be used for
TX49, but normally TX49 uses higher precision clocksource_mips.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

And make use of it for Cobalt.  A few others such as the Malta could make
use of it as well.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Most of these fixes were already submitted for old kernel versions, and were
approved, but for some reason they never made it into the releases.

Because this is a consolidation of a couple old missed patches, it touches both
Kconfigs and documentation texts.
Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

Quoting Randy:

"It seems sad that this patch sources Kconfig.marker, a 7-line file,
20-something times.  Yes, you (we) don't want to put those 7 lines into
20-something different files, so sourcing is the right thing.

However, what you did for avr32 seems more on the right track to me: make
_one_ Instrumentation support menu that includes PROFILING, OPROFILE, KPROBES,
and MARKERS and then use (source) that in all of the arches."
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Derived from the i386 variant with a few x86 complexities chopped off.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The kernel currently only supports broadcasting of the timer interrupt
from a single timer, not multicasting into two multicast groups of
processors.  So the implemented mechanism for SMTC works by broadcasting
the cp0 compare interrupt on VPE 0 and ignoring it on any additional VPEs.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>