- 14 5月, 2014 1 次提交
-
-
由 Wilfried Klaebe 提交于
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: NDave Miller <davem@davemloft.net> Signed-off-by: NWilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 5月, 2014 1 次提交
-
-
由 dingtianhong 提交于
The __vlan_find_dev_deep should always called in RCU, according David's suggestion, rename to __vlan_find_dev_deep_rcu looks more reasonable. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 5月, 2014 3 次提交
-
-
由 Rajesh Borundia 提交于
o SR-IOV VF can be uplinked to bridge/macvtap device. Enable mac learning to support communication through embedded switch. o Learn vlan filters based on QLCNIC_VLAN_FILTERING flag. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Commands from VF may sleep during PF-VF communication. Earlier we use to process qlcnic_sriov_vf_set_multi function in process context. Now individual commands that are called in atomic context are processed in process context without waiting for completion of command. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Add support for SR-IOV VF probe in hypervisor to enable assignment of VFs within hypervisor. o SR-IOV VF can be uplinked to bridge/macvtap device with this change. o Refactor SR-IOV enable/disable code. We cannot take rtnl lock while enabling/disabling SR-IOV as VF probe will take an rtnl lock. o Disable spoofchk by default. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 5月, 2014 2 次提交
-
-
由 Shahed Shaikh 提交于
Do not set netdev->real_num_tx_queues directly, let netif_set_real_num_tx_queues() take care of it. Do not overwrite netdev->num_tx_queues everytime when driver changes its Tx ring size through ethtool -L and also notify stack to update number of Rx queues. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o In case of non-multi TX queue mode driver does not initialize "crb_intr_mask" pointer and driver was accessing that un-initialized pointer while dumping TX queue. So dump "crb_intr_mask" only when it is initilaized. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 4月, 2014 5 次提交
-
-
由 Sucheta Chakraborty 提交于
o When the driver loads in legacy interrupt mode, only vNICs with PCI function number 0-7 are supported. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Tx interrupt coalescing parameters can now be set from VF. o Added validation code in PF to validate the parameters. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harish Patil 提交于
Signed-off-by: NHarish Patil <harish.patil@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Gordeev 提交于
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Dept-HSGLinuxNICDev@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Acked-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 4月, 2014 1 次提交
-
-
由 Sony Chacko 提交于
Some firmware versions fails to reset the lock during initialization. Force reset firmware API lock during driver probe to ensure lock availability. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2014 1 次提交
-
-
由 Alexander Gordeev 提交于
Function qlcnic_setup_tss_rss_intr() might enter endless loop in case pci_enable_msix() contiguously returns a positive number of MSI-Xs that could have been allocated. Besides, the function contains 'err = -EIO;' assignment that never could be reached. This update fixes the aforementioned issues. Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Dept-HSGLinuxNICDev@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Acked-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2014 1 次提交
-
-
由 Sucheta Chakraborty 提交于
o INIT_NIC_FUNC should be first mailbox sent. Sending DCB capability and parameter query commands after that command. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2014 1 次提交
-
-
由 Shahed Shaikh 提交于
Commit 2b3d7b75("qlcnic: Add VXLAN Rx offload support") uses vxlan_get_rx_port() which caused build failure when VXLAN=m. This patch fixes the build failure by adding dependency on VXLAN in Kconfig of qlcnic module and use vxlan_get_rx_port() and support code accordingly. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2014 2 次提交
-
-
由 Shahed Shaikh 提交于
This patch adds Rx checksum offload support for VXLAN. Implements .ndo_{add|del}_vxlan_port netdev ops. Adapter supports only one VXLAN port, so program adapter with very first UDP port which VXLAN driver is listening to. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
This patch adds LSO, LSO6 and Tx checksum offload support for VXLAN encapsulated packets on 83xx/84xx series adapters. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 2月, 2014 3 次提交
-
-
由 Rajesh Borundia 提交于
o Driver was not re-setting sds ring count to 1 after failing to allocate msi-x interrupts. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Once interrupts are enabled, instead of using module parameters, use flags (QLCNIC_MSI_ENABLED and QLCNIC_MSIX_ENABLED) set by driver to check interrupt mode. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Driver was treating -ve return value as success in case of qlcnic_enable_msi_legacy() failure Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2014 2 次提交
-
-
由 Sucheta Chakraborty 提交于
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Treat firmware minidump template headers for 82xx and 83xx/84xx adapters separately, as it may change for 82xx and 83xx/84xx adapter type independently. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2014 2 次提交
-
-
由 Alexander Gordeev 提交于
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Gordeev 提交于
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2014 1 次提交
-
-
由 Rajesh Borundia 提交于
o __qlcnic_down call's netif_tx_disable which in turn stops all the TX queues, corresponding start queue was missing in __qlcnic_up which was leading to tx timeout. o The commit b84caae4 (qlcnic: Fix usage of netif_tx_{wake, stop} api during link change.) exposed this issue. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 1月, 2014 5 次提交
-
-
由 Himanshu Madhani 提交于
o Refactored MSI-x vector calculation for All adapters. Decoupled logic in the code which was using same call to request MSI-x vectors in default driver load, as well as during set_channel() operation for TSS/RSS. This refactoring simplifies code for TSS/RSS code path as well as probe path of the driver load for all adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Refactor configuration of interrupt coalescing parameters for all supported adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
Add support for MSI/MSI-X mode in poll controller routine. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
o Added hardware ops for interrupt enable/disable functions Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Dump each Tx queue details with all descriptors, queue indices and Tx queue stats to imporve data colletion in situations where Tx timeout occurs. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2014 1 次提交
-
-
由 stephen hemminger 提交于
Functions only used in one file should be static. Found by running make namespacecheck Compile tested only. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2014 1 次提交
-
-
由 Himanshu Madhani 提交于
o Refactored code to handle beaconing test for all adapters. o Use GET_LED_CONFIG mailbox command for 83xx/84xx series adapter to detect current beaconing state of the adapter. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2014 1 次提交
-
-
由 Manish Chopra 提交于
o Driver was not updating TX stats so it was not populating statistics in `ifconfig` command output. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2014 1 次提交
-
-
由 Shahed Shaikh 提交于
o Driver is using common tx_clean_lock for all Tx queues. This patch adds per queue tx_clean_lock. o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Fixed in this patch. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 1月, 2014 1 次提交
-
-
由 dingtianhong 提交于
Use the possibly more efficient ether_addr_equal or ether_addr_equal_unaligned to instead of memcmp. Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2013 4 次提交
-
-
由 Jitendra Kalsaria 提交于
Extend virtual NIC functions from 8 to 16 for 84xx adapter. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Support multiple VLANs on 84xx VF devices Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Allow user to set sigle Tx/Rx queue in MSI-x mode, for ALL supported adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Change function name from qlcnic_83xx_register_nic_idc_func to qlcnic_83xx_initialize_nic Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-