Option is used by upcoming timehist command.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375930261-77273-12-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Option is used by upcoming timehist command.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375930261-77273-11-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Make print options based on flags. Simplifies addition of more print
options which is the subject of upcoming patches.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375930261-77273-10-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The PERF_RECORD_FORK event is already collected as part of the use of
cmd_record and those events are analyzed as part of the libperf
machinery.  Using the fork tracepoint as well just duplicates the event
load.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375930261-77273-6-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Event is not needed nor analyzed. Since perf-sched leverages perf-record
to capture the sched data, we already capture task events like EXIT.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375930261-77273-5-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Not used in the function, so no sense in doing the lookup here. Thread
look up will be done in the timehist command, and no sense in doing it
twice.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375930261-77273-4-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Destroy argument is not necessary. If session is not returned to caller,
then clean it up.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375930261-77273-3-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Update perf-kvm documentation with new live subcommand. Add -p/--pid
option for perf-kvm-stat-report as well.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Requested-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375926999-75129-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is useful to spot high latency blips. It is normal for HLT reasons
to have long exit times, so strip those from the duration check.

v2: changed threshold to duration per acme's request
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375926999-75129-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Do annotation using /proc/kcore and /proc/kallsyms, removing the
   need for a vmlinux file kernel assembly annotation. This also improves
   this use case because vmlinux has just the initial kernel image, not
   what is actually in use after various code patchings by things like
   alternatives, etc. From Adrian Hunter.

 * Add various improvements and fixes to the "vmlinux matches kallsyms"
   'perf test' entry, related to the /proc/kcore annotation feature.

 * Add --initial-delay option to 'perf stat' to skip measuring for
   the startup phase, from Andi Kleen.

 * Add perf kvm stat live mode that combines aspects of 'perf kvm stat' record
   and report, from David Ahern.

 * Add option to analyze specific VM in perf kvm stat report, from David Ahern.

 * Do not require /lib/modules/* on a guest, fix from Jason Wessel.

 * Group leader sampling, that allows just one event in a group to sample while
   the other events have just its values read, from Jiri Olsa.

 * Add support for a new modifier "D", which requests that the event, or group
   of events, be pinned to the PMU, from Michael Ellerman.

 * Fix segmentation fault on the gtk browser, from Namhyung Kim.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This reverts commit 079787f2.

Below commit already resolve a cross build problem.
I have been noticed this too lately.

    commit 3c4797d4
    Author: Rabin Vincent <rabin@rab.in>
    Date:   Fri May 17 22:27:44 2013 +0200

    tools lib lk: Respect CROSS_COMPILE

    Make lk use CROSS_COMPILE, in order to be able to cross compile perf
    again.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1373936614-22224-1-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For some types of work loads and special guest environments, you might
have a kernel that has no kernel modules.  The perf kvm record tool
fails instantiate vmlinux maps when the kernel modules directory cannot
be opened, even though the kallsyms has been properly processed.  This
leads to a perf kvm report that has no guest symbols resolved.

This patch changes the failure to locate kernel modules to be non-fatal.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373920073-4874-1-git-send-email-jason.wessel@windriver.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a negative test to test__checkevent_pmu_events() to get lots of
coverage of the negative case, ie. when the modifier is not specified.

Add a test of a single event, and of the group case.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-2-git-send-email-michael@ellerman.id.auSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.

The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".

So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.

This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.

Comparison of results with and without pinning:

$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...

  79,590,480,683 cycles         #  0.000 GHz
 166,123,716,524 instructions   #  2.09  insns per cycle
                                #  0.11  stalled cycles per insn

  79,352,134,463 cycles         #  0.000 GHz                     [11.11%]
 165,178,301,818 instructions   #  2.08  insns per cycle
                                #  0.11  stalled cycles per insn [11.13%]

As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.

The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NJiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
  suggested by Jiri Olsa ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The commit 2b8bfa6b ("perf tools: Centralize default columns init in
perf_hpp__init") moves initialization of common overhead column to
perf_hpp__init() but forgot about the gtk code.

So the gtk code added the same column to the list twice causing infinite
loop when iterating it by perf_hpp__for_each_format loop.  When I run
perf report --gtk, I can see following messages indefinitely.

  (perf:11687): Gtk-CRITICAL **: IA__gtk_main_quit: assertion 'main_loops != NULL' failed
  perf: Segmentation fault
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375766056-19377-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add an option to analyze a specific VM within a data file. This allows
the collection of kvm events for all VMs and then analyze data for each
VM (or set of VMs) individually.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-6-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add max and min times for exit events.

v2: address Xiao's comment to use get_event function for pulling max and
    min from stats struct similar to mean and count
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-4-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf kvm stat currently requires back to back record and report commands
to see stats. e.g,.

  perf kvm stat record -p $pid -- sleep 1
  perf kvm stat report

This is inconvenvient for on box monitoring of a VM. This patch
introduces a 'live' mode that in effect combines the record plus report
into one command. e.g., to monitor a single VM:

  perf kvm stat live -p $pid

or all VMs:

  perf kvm stat live

Same stats options for the record+report path work with the live mode.
Display rate defaults to 1 second and can be changed using the -d
option.

v4:
- address comments from Xiao -- verify_vcpu check should not look at
  processors on line for the host, prune configurable options.
- set attr->{mmap,comm,task} to 0 - don't need task events so trim events
  we have to deal with
- better control of time for queue event flushing to reduce frequency of
  "Timestamp below last timeslice flush" failures.

v3:
updated to use existing tracepoint parsing code

v2:
removed ABSTIME arg from timerfd_settime as mentioned by Namhyung
only call perf_kvm__handle_stdin when poll returns activity.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-3-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Taking a lesson from perf-trace and bringing in control of event
processing to perf-kvm-stat-live: parse the sample to get access the
time leaving just the need to queue it to the ordered samples list.  For
that the queue_event function needs to be exported.

Unexport perf_session__process_event.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375753297-69645-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20130802111050.GA29126@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The previous description: "Search previous string" is usually associated
with the 'N' following a '/string', the opposite of 'n', which is
'Search next string' in the direction established with '/' or '?'.

So change it to 'Search string backwards', to clarify that.

The 'N' hotkey remains to be implemented with the semantic described
above.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5lw5y15d7vv308xbpm8pqe4g@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The /proc/kcore file has no symbols, so the call target name does not
display.  Fix by looking up the symbol name if it is on the same map.
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-14-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When kcore is used for annotation, symbols do not have correct sizes
because they come from kallsyms, that has only its start address, with
the end address being the next symbol's minus one.

That sometimes results in an extra nop being seen after the end of a
function.  Remove it.
Suggested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-13-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently the symbol name is displayed at the top when displaying symbol
annotation.  Add to this the dso long name.
Suggested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-12-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Annotation with /proc/kcore is possible so the logic is adjusted to
allow it.  The main difference is that /proc/kcore had no symbols so the
parsing logic needed a tweak to read jump offsets.

The other difference is that objdump cannot always read from kcore.
That seems to be a bug with objdump.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-11-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Make the "object code reading" test attempt to read from kcore.

The test uses objdump which struggles with kcore. i.e.  doesn't always
work, sometimes takes a long time.  The test has been made to work
around those issues.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-10-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The kallsyms maps now may map to kcore and the symbol values now may be
file offsets.  For comparison with vmlinux the virtual memory address is
needed which is obtained by unmapping the symbol value.

The "vmlinux symtab matches kallsyms" is adjusted accordingly.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-9-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In the absence of vmlinux, perf tools uses kallsyms for symbols.  If the
user has access, now also map to /proc/kcore.

The dso data_type is now set to either DSO_BINARY_TYPE__KCORE or
DSO_BINARY_TYPE__GUEST_KCORE as approprite.

This patch breaks the "vmlinux symtab matches kallsyms" test.  That is
fixed in a following patch.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-8-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The new "object code reading" test shows that it is not possible to read
object code from kernel modules.  That is because the mappings do not
map to the dsos.  This patch fixes that.

This involves identifying and flagging relocatable (ELF type ET_REL)
files (e.g. kernel modules) for symbol adjustment and updating
map__rip_2objdump() accordingly.  The kmodule parameter of
dso__load_sym() is taken into use and the module map altered to map to
the dso.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The vmlinux maps now map to the dso and the symbol values are now file
offsets.  For comparison with kallsyms the virtual memory address is
needed which is obtained by unmapping the symbol value.

The "vmlinux symtab matches kallsyms" is adjusted accordingly.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The new "object code reading" test shows that it is not possible to read
object code from vmlinux.  That is because the mappings do not map to
the dso.  This patch fixes that.

A side-effect of changing the kernel map is that the "reloc" offset must
be taken into account.  As a result of that separate map functions for
relocation are no longer needed.

Also fixing up the maps to match the symbols no longer makes sense and
so is not done.

The vmlinux dso data_type is now set to either DSO_BINARY_TYPE__VMLINUX
or DSO_BINARY_TYPE__GUEST_VMLINUX as approprite, which enables the
correct file name to be determined by dso__binary_type_file().

This patch breaks the "vmlinux symtab matches kallsyms" test.  That is
fixed in a following patch.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In order to use kernel maps to read object code, those maps must be
adjusted to map to the dso file offset.  Because lazy-initialization is
used, that is not done until symbols are loaded.  However the maps are
first used by thread__find_addr_map() before symbols are loaded.  So
this patch changes thread__find_addr() to "load" kernel maps before
using them.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using the information in mmap events, perf tools can read object code
associated with sampled addresses.  A test is added that compares bytes
read by perf with the same bytes read using objdump.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When removing duplicate symbols, prefer to remove syscall aliases
starting with SyS or compat_SyS.

A side-effect of that is that it results in slightly improved results
for the "vmlinux symtab matches kallsyms" test.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When interval mode is outputting to a pipe, each measurement should be
flushed individually, so that the reader sees it timely.

With a terminal each line is automatically flushed by stdio, but that is
disabled with non terminal output.

Simply fflush output after each time interval
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-5-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When measuring workloads the startup phase -- doing page faults, dynamic
linking, opening files -- is often very different from the rest of the
workload.  Especially with smaller kernels and using counter
multiplexing this can give significant measurement errors.

Multiplexing assumes that the workload is mostly the same over longer
periods. But at startup there is typically some spike of activity which
is relatively short.  If many groups are multiplexing the one group
seeing the spike, and which is then scaled up over the time to run all
groups, may see a significant error.

Also in general it's often not useful to measure the startup, because it
is so different from the rest.

One way around this is to use interval mode and discard the first
sample, but this can be awkward because interval mode doesn't support
intervals of less than 100ms, and also a useful interval is not
necessarily the same as a useful startup delay.

This patch adds a new --initial-delay / -D option to skip measuring for
the startup phase. The time can be specified in ms

Here's a simple example:

perf stat -e page-faults bash -c 'for i in $(seq 100000) ; do true ; done'
...
             3,721 page-faults
...

If we just wait 20 ms the number of page faults is 1/3 less:

perf stat -D 20 -e page-faults bash -c 'for i in $(seq 100000) ; do true ; done'
...
             2,823 page-faults
...

So we filtered out most of the startup noise from bash.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-4-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add support for enabling already set up counters by using an
ioctl. I share some code with the filter setup.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-3-git-send-email-andi@firstfloor.org
[ Fixed up 'err' variable indentation ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Minor cleanup.

The dummy execve to pre-resolve the PLT is obsolete since
"enable_on_execve" was added. The counters are only
running after the execve anyways. So just remove it.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-2-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Needed by kvm live command. Make record_args a local while we are
messing with the args.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375473947-64285-5-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allows kvm live mode to reuse the event processing and ordered samples
processing used by the perf-report path.

v2: removed flush_sample_queue as noticed by Jiri
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1375473947-64285-4-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>