Signed-off-by: NJay Cornwall <jay.cornwall@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Previously submitted code was taken from an incorrect branch and
was non-functional.

Cc: Oak Zeng <oak.zeng@amd.com>
Signed-off-by: NJay Cornwall <jay.cornwall@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-By: NOak Zeng <oak.zeng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the trap is entered due to MODE.DEBUG_EN=1 and SAVECTX is raised
concurrently the handler cannot identify the source of the exception.
This causes the debugger to lose single step exception notification
when a context save request arrives at the same time.

When MODE.DEBUG_EN=1 and STATUS.HALT=0 (exception not already handled)
jump to the second-level trap handler upon entering the trap. The
second-level trap will set STATUS.HALT=1 and return to the shader.
If SAVECTX was raised then control flow will return to the trap, which
will then handle the context save request.

Cc: Tony Tye <tony.tye@amd.com>
Cc: Laurent Morichetti <laurent.morichetti@amd.com>
Cc: Qingchuan Shi <qingchuan.shi@amd.com>
Signed-off-by: NJay Cornwall <jay.cornwall@amd.com>
Reviewed-by: NLaurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When a wavefront raises TRAPSTS.XNACK_ERROR with STATUS.ALLOW_REPLAY=0
subsequent memory instructions have undefined behavior. In practice
SQC stores continue to work but TCP stores do not.

Context save is permitted to fail after XNACK error because the
wavefront will be halted and subsequently terminated. However the
debugger has an interest in retrieving the wavefront VGPR/LDS state.

Detect the out-of-spec case and use SQC stores during context save
in place of TCP stores.
Signed-off-by: NJay Cornwall <jay.cornwall@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

navi14 share same PTE format with navi10.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ntiancyin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since we are using the signed FW now, and also using PSP firmware loading,
but it's still potential to break driver when loading FW directly
instead of PSP, so we should add offset.
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

in this patch,
drm/amd/powerplay: add callback function of get_thermal_temperature_range
the driver missed temperature granularity change on other temperature.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Drop redundant check, duplicate check, duplicate setting
and fix the return value.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Honor the 'dpm' module parameter setting on SW SMU routine as what
we did on previous ASICs. SMU FW loading is still proceeded even
with "dpm=0".
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently the allocation of config may fail and a null pointer
dereference on config can occur.  Fix this by added a null
check on a failed allocation of config.

Addresses-Coverity: ("Dereference null return")
Fixes: c2cd9d04 ("drm/amd/display: Hook up calls to do stereo mux and dig programming to stereo control interface")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

arch/x86/Makefile disables SSE and SSE2 for the whole kernel.  The
AMDGPU drivers modified in this patch re-enable SSE but not SSE2.  Turn
on SSE2 to support emitting double precision floating point instructions
rather than calls to non-existent (usually available from gcc_s or
compiler_rt) floating point helper routines for Clang.

This was originally landed in:
commit 10117450 ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines")
but reverted in:
commit 193392ed ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"")
due to bugreports from GCC builds. Add guards to only do so for Clang.

Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487
Link: https://github.com/ClangBuiltLinux/linux/issues/327Suggested-by: NSedat Dilek <sedat.dilek@gmail.com>
Suggested-by: NSami Tolvanen <samitolvanen@google.com>
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This was missed during the addition of VegaM support
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NKent Russell <kent.russell@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. the thermal temperature is asic related data, move the code logic to
xxx_ppt.c.
2. replace data structure PP_TemperatureRange with
smu_temperature_range.
3. change temperature uint from temp*1000 to temp (temperature uint).
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On vega20, there is an SMU message to query it.  On navi, it's fetched
from the metrics table.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise, it will cause driver access non-existing sdma registers
in gpu reset code path
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

remove redundacy debug log in smu.
eg:
[ 6897.969447] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024114] amdgpu: [powerplay] Unsupported SMU message: 38
[ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024152] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078296] amdgpu: [powerplay] Unsupported SMU message: 38
[ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078333] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6901.133230] amdgpu: [powerplay] Unsupported SMU message: 38
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2:
add function smu_default_set_performance_level as default dpm level handler.
change function name smu_set_performance_level to smu_asic_set_performance_level

v1:
1.NAVI10_PEAK_SCLK_XTX    1830 Mhz
2.NAVI10_PEAK_SCLK_XT     1755 Mhz
3.NAVI10_PEAK_SCLK_XL     1625 Mhz
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NJack Gui <Jack.Gui@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]:
Some active dongles have DP++ port and DP port at the same time. Current
code doesn't cover DP++ case and processes as default DVI case, in which
audio is disabled. Because of dual mode, DP case is also treat as DVI case
for the other port.

[How]:
According DP 1.4 spec, add DP++ procedure similar with HDMI case. Also
add None dongle type for DP case.
Signed-off-by: NDale Zhao <dale.zhao@amd.com>
Reviewed-by: NWenjing Liu <wenjing.liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DC configures the GSL group for the pipe when pipe_split is enabled
and we're switching flip types (buffered <-> immediate flip) on DCN2.

In order to record what GSL group the pipe is using DC stores it in
the pipe's stream_res. DM is not aware of this internal grouping, nor
is DC resource.

So when DM creates a dc_state context and passes it to DC the current
GSL group is lost - DM never knew about it in the first place.

After 3 immediate flips we run out of GSL groups and we're no longer
able to correctly perform *any* flip for multi-pipe scenarios.

[How]
The gsl_group needs to be copied to the new context.

DM has no insight into GSL grouping and could even potentially create
a brand new context without referencing current hardware state. So this
makes the most sense to have happen in DC.

There are two places where DC can apply a new context:
- dc_commit_state
- dc_commit_updates_for_stream

But what's shared between both of these is apply_ctx_for_surface.

This logic only matters for DCN2, so it can be placed in
dcn20_apply_ctx_for_surface. Before doing any locking (where the GSL
group is setup) we can copy over the GSL groups before committing the
new context.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersen.wu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a flag to dc_debug_options to determine if a disconnected edp link
should be destroyed.
Signed-off-by: NLewis Huang <Lewis.Huang@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTony Cheng <tony.cheng@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For some platforms, we need to know SMU version for driver/SMU
compatibility. This change adds that field.
Signed-off-by: NFatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Existing support in DC for pstate only accounts for a single latency.  This is sufficient when the
variance of latency is small, or that pstate support isn't necessary for correct ASIC functionality.

Newer ASICs violate both existing assumptions.  PState support is mandatory of correct ASIC
functionality, but not all latencies have to be supported.  Existing code supports a "full p state" which
allows memory clock to change, but is hard for DCN to support (as it requires very large buffers).
New code will now fall back to a "dummy p state" support when "full p state" cannot be support.
This easy p state support should always be allowed.

[how]
Define a new latency in socBB.  Add fallback logic to support it.  Note DML is also updated to ensure
that fallback will always work.
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In DCN2x asic, the MPCC status register definition changed, and
our logic for assert is incorrect. disabled is valid state,
where we should see idle and not busy, where as in not
disabled state, we should see not idle.

[How]
Change assert condition to be more sensible.
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Previously assume eDP sink present if connector present. Do not
need to enforce this restriction. Fix issue where driver attempt
to read link setting even though no edp connected.

{How]
Only read link setting after reading connection status.
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The audios array defined in "struct resource_pool" is only 6 (MAX_PIPES)
but the max number of audio devices (num_audio) is 7. In some projects,
it will run out of audios array.

[How]
Incraese the audios array size to 7.
Signed-off-by: NTai Man <taiman.wong@amd.com>
Reviewed-by: NJoshua Aberback <Joshua.Aberback@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For boards that support eDP but do not have a physical eDP
display connected an ASSERT will be thrown. This is not a
critical failure and shouldn't be treated as such.

[How]
Drop the assertion.
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In an effort to stop redundant calls to dce110_disable_audio_stream
the audio->enabled flag was added to the audio resource struct. While
this state probably shouldn't have been tracked on the audio struct
itself it still works fine for some sequences.

However, it does not work for cases where we're freeing the audio
resource (such as hotplugs) or when dynamic audio is enabled.

In these cases the pipe_ctx->stream_res.audio = NULL before we can
set audio->enabled = false. The next time we acquire the audio resource
such as on hotplug the audio will not be enabled for the stream since
DC thinks it's still enabled.

Audio state tracking should cover this sequence.

[How]
Set audio->enabled = false at the start as long as we have
pipe_ctx->stream_res.audio.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NZhan Liu <Zhan.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

 [Why]
Code to enable DCN20 dynamic metadata feature is duplicated in two places
and was added to DCE110 enable stream.

[How]
Create DCN20 specific enable stream function for clarity, and add a hardware
sequencer function to program dynamic metadata to avoid the duplicate
code.
Signed-off-by: NJulian Parkin <julian.parkin@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

In dm_helpers_parse_edid_caps, there is a corner case where no speakers
can be allocated even though the audio mode count is greater than 0.
Enabling audio when no speaker allocations exists can cause issues in
the video stream.

[How]

Add a check to not enable audio unless one or more speaker allocations
exist (since doing this can cause issues in the video stream).
Signed-off-by: NAlvin Lee <alvin.lee2@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
It is possible (but very unlikely) that constructing dc fails
before current_state is created.

We support 666 color depth in some scenarios, but this
isn't handled in get_norm_pix_clk. It uses exactly the
same pixel clock as the 888 case.

[How]
Check for non null current_state before destructing.

Add case for 666 color depth to get_norm_pix_clk to
avoid assertion.
Signed-off-by: NJulian Parkin <julian.parkin@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
update_bounding_box calculates intermediate bb states based on clock relationship
however, the last state doesn't need to maintain a minimum relationship, but should
actually contain maximum of every clock.  otherwise maximum clocks are not usable

[how]
once the calculated bb is built, override the last state with max values
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add dual plane dcc programming support for
surfaces.

Removes unions from plane size and dcc params as they
serve no practical purpose only making our code
more convoluted. This results in easy dual plane
dcc and surface size programming.

Temporary diags_dm code is used to handle the interface
change without breaking functionality as a diags change
needs to be applied after this one.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Users want to not have filtering when scaling by integer
multiples to native timing.

[HOW]
If timing is a multiple integer of view, we set number of taps
to 1 (effectivly closest neighbour).
Signed-off-by: NReza Amini <Reza.Amini@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Acked-by: NTony Cheng <Tony.Cheng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
need to verify the impact of spatial dithering on 8bpc bypass mode.

[How]
added CRC sources and configure dihter option from dc stream.
Signed-off-by: NDingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: NHanghong Ma <Hanghong.Ma@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows to set a minimum display and dpp clock on dcn2+ HW
by adjusting clocks used for dml calculations.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>