i965gm no longer needs the fence for scanout so we should be
do what we do for ctg+ and only configure a fence for FBC
when we have one.

In theory this should do nothing atm on account of
intel_fbc_can_activate() requiring the fence, but since
we do this for g4x+ let's do it for i965gm as well. We
may want to relax the requirements at some point and allow
FBC without a fence.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-9-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Rather than playing around with vma+flags let's just grab
the fence id from within and stash that directly in the fbc
cache/params.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-8-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Currently the code (ab)uses cache->vma to indicate the plane
visibility. I want to nuke that so let's add a dedicated boolean
for this.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-7-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Precompute the override cfb stride value so that we can check
it when determining if flip nuke can be used or not.

The hardware has 13 bits for this, so we can shrink the storage
to u16 while at it.

v2: Don't explode when crtc_state->enable_fbc lies to us
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-6-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

We don't want to use the FBC hardware render tracking so let's not
enable it. To use the hw tracking properly we'd anyway need to
integrate this into the command submissing path as the register is
context saved, and if rendering happens via the ppgtt we'd have
to configure it with the ppgtt address instead of the ggtt address.
Easier to use software tracking instead.

Note that on pre-ilk we can't actually disable render tracking.
However we can't rely on it because it requires that DSPSURF to
match the render target address, and since we play tricks
with DSPSURF that may not be the case. Hence we shall rely on
software render tracking on all platforms.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-5-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Not sure where the single pipe only restriction came for fbc1.
Nothing I can see that would prevent this.

v2: Nuke no_fbc_on_multiple_pipes() too
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-3-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

We're missing a workaround in the fbc code for all glk+ platforms
which can cause corruption around the top of the screen. So
enabling fbc by default is a bad idea. I'm not keen to backport
the w/a so let's start by disabling fbc by default on all glk+.
We'll lift the restriction once the w/a is in place.

Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Change the calling convention to just pass the state+crtc and
switch to intel_ types throughout.

We'll also do a quick s/if (old_primary_state)/if (new_primary_state)/
so that we'll be able to eliminate old_primary_state later. This
is fine since we always have either both old and new state or neither.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127190556.1574-5-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

Split up plane_state->base to uapi. This is done using the following patch,
ran after the previous commit that splits out any hw references:

@@
struct intel_plane_state *T;
identifier x;
@@
-T->base.x
+T->uapi.x

@@
struct intel_plane_state *T;
@@
-T->base
+T->uapi
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-10-maarten.lankhorst@linux.intel.com

Split up plane_state->base to hw. This is done using the following patch:

@@
struct intel_plane_state *T;
identifier x =~ "^(crtc|fb|alpha|pixel_blend_mode|rotation|color_encoding|color_range)$";
@@
-T->base.x
+T->hw.x
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-9-maarten.lankhorst@linux.intel.com

Split up crtc_state->base to hw where appropriate. This is done using the following patch:

@@
struct intel_crtc_state *T;
identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$";
@@
-T->base.x
+T->hw.x

@@
struct drm_crtc_state *T;
identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$";
@@
-to_intel_crtc_state(T)->base.x
+to_intel_crtc_state(T)->hw.x
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-4-maarten.lankhorst@linux.intel.com

The FBC requires a couple of contiguous buffers, which we allocate from
stolen memory. If stolen memory is unavailable, we cannot allocate those
buffers and so cannot support FBC. Mark it so.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911175926.31365-1-chris@chris-wilson.co.uk

WA 1409120013 is also valid for TGL, so lets check for ">= 11".

BSpec: 52890

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904230241.20638-1-jose.souza@intel.com

To reduce the number of explicit dev_priv->uncore calls in the display
code ahead of the introduction of dev_priv->de_uncore, this patch
introduces a wrapper for one of the main usages of it, the register
waits. When we transition to the new uncore, we can just update the
wrapper to point to the appropriate structure.

Since the vast majority of waits are on a set or clear of a bit or mask,
add set & clear flavours of the wrapper to simplify the code.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-7-daniele.ceraolospurio@intel.com

Everything about the file is about display, and mostly about types
related to display. Move under display/ as intel_display_types.h to
reflect the facts.

There's still plenty to clean up, but start off with moving the file
where it logically belongs and naming according to contents.

v2: fix the include guard name in the renamed file
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com

Now that we have a new subdirectory for display code, continue by moving
modesetting core code.

display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.

v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com

This chicken bit should be set before enabling FBC to avoid screen
corruption when the plane size has odd vertical and horizontal
dimensions.  It is safe to leave the bit set even when FBC is disabled.

v2:
 - The bspec's name for this bit on these platforms ("Spare 14") is
   pretty meaningless.  Let's rename the bit definition to something
   that more accurately reflects what the bit really does.  (Clint)

v3:
 - The chicken register was already defined (along with a few other
   gen9-specific bits) farther down.  Just add the new bit definition
   there.  (Clint)

Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612183631.30540-1-matthew.d.roper@intel.comReviewed-by: NClint Taylor <Clinton.A.Taylor@intel.com>

On many (all?) the Gemini Lake systems we work with, there is frequent
momentary graphical corruption at the top of the screen, and it seems
that disabling framebuffer compression can avoid this.

The ticket was reported 6 months ago and has already affected a
multitude of users, without any real progress being made. So, lets
disable framebuffer compression on GeminiLake until a solution is found.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108085
Fixes: fd7d6c5c ("drm/i915: enable FBC on gen9+ too")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423092810.28359-1-jian-hong@endlessm.com
(cherry picked from commit 1d25724b)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

On many (all?) the Gemini Lake systems we work with, there is frequent
momentary graphical corruption at the top of the screen, and it seems
that disabling framebuffer compression can avoid this.

The ticket was reported 6 months ago and has already affected a
multitude of users, without any real progress being made. So, lets
disable framebuffer compression on GeminiLake until a solution is found.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108085
Fixes: fd7d6c5c ("drm/i915: enable FBC on gen9+ too")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423092810.28359-1-jian-hong@endlessm.com

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

v2: Fix checkpatch whitespace complaint
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7e776690bf139ccdd0306b30df08dc68e74603de.1554461791.git.jani.nikula@intel.com

It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.

Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.

No functional changes.

v2: Remove stray newline (Chris)
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/db44ba199c86f24bfa9e490531eddf51cccd89da.1554461791.git.jani.nikula@intel.com

The intel_uncore structure is the owner of register access, so
subclass the function to it.

While at it, use a local uncore var and switch to the new read/write
functions where it makes sense.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-9-daniele.ceraolospurio@intel.com

Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.

To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.

v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.

v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.

This will also conflict with ongoing drmP.h cleanup by others I
expect.

v3: Rebase on top of atomic bochs.

v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
  other places (all suggested from Laurent adopted unchanged).
- sort alphabetically

v5: Actually try to sort them, and while at it, sort all the ones I
touch.

v6: Rebase onto i915 changes.

v7: Rebase once more.
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: NCK Hu <ck.hu@mediatek.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NLiviu Dudau <liviu.dudau@arm.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch fixes sprinkled on top of the changed lines.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14ed72e7f04c9340a057855c5950b54811f8a477.1547629303.git.jani.nikula@intel.com

Without this, we will get a dmesg-warn when enable_fbc is cleared on a fastset:
WARN_ON(!crtc_state->enable_fbc)
WARNING: CPU: 0 PID: 1090 at drivers/gpu/drm/i915/intel_fbc.c:1091 intel_fbc_enable+0x2ce/0x580 [i915]
RIP: 0010:intel_fbc_enable+0x2ce/0x580 [i915]
Call Trace:
 ? __mutex_unlock_slowpath+0x46/0x2b0
 intel_update_crtc+0x6f/0x2b0 [i915]
 skl_update_crtcs+0x1d1/0x2b0 [i915]
 intel_atomic_commit_tail+0x1ea/0xdb0 [i915]
 intel_atomic_commit+0x244/0x330 [i915]
 drm_mode_atomic_ioctl+0x85d/0x950
 ? drm_atomic_set_property+0x970/0x970
 drm_ioctl_kernel+0x81/0xf0
 drm_ioctl+0x2de/0x390
 ? drm_atomic_set_property+0x970/0x970
 ? __handle_mm_fault+0x81b/0xfc0
 do_vfs_ioctl+0xa0/0x6e0
 ? __do_page_fault+0x2a5/0x550
 ksys_ioctl+0x35/0x60
 __x64_sys_ioctl+0x11/0x20
 do_syscall_64+0x55/0x190
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Changes since v1:
- Move intel_fbc_disable to intel_update_crtc() (Hans)

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181220151719.30586-1-maarten.lankhorst@linux.intel.comReviewed-by: NHans de Goede <hdegoede@redhat.com>

Define IS_GEN() similarly to our IS_GEN_RANGE(). but use gen instead of
gen_mask to do the comparison. Now callers can pass then gen as a parameter,
so we don't require one macro for each gen.

The following spatch was used to convert the users of these macros:

@@
expression e;
@@
(
- IS_GEN2(e)
+ IS_GEN(e, 2)
|
- IS_GEN3(e)
+ IS_GEN(e, 3)
|
- IS_GEN4(e)
+ IS_GEN(e, 4)
|
- IS_GEN5(e)
+ IS_GEN(e, 5)
|
- IS_GEN6(e)
+ IS_GEN(e, 6)
|
- IS_GEN7(e)
+ IS_GEN(e, 7)
|
- IS_GEN8(e)
+ IS_GEN(e, 8)
|
- IS_GEN9(e)
+ IS_GEN(e, 9)
|
- IS_GEN10(e)
+ IS_GEN(e, 10)
|
- IS_GEN11(e)
+ IS_GEN(e, 11)
)

v2: use IS_GEN rather than GT_GEN and compare to info.gen rather than
    using the bitmask
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-2-lucas.demarchi@intel.com

RANGE makes it longer, but clearer. We are also going to add a macro to
check an individual gen, so add the _RANGE prefix here.

Diff generated with:

sed 's/IS_GEN(/IS_GEN_RANGE(/g' drivers/gpu/drm/i915/{*/,}*.{c,h} -i

v2: use IS_GEN rather than GT_GEN
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-1-lucas.demarchi@intel.com

GLK and CNL+ supports a bigger FBC tracking area.
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205004823.30823-1-jose.souza@intel.com

This helps separate what capabilities are display capabilities.

v3: Moving display struct right after flags (Lucas)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: NJani Nikula <jani.nikula@linux.intel.com>
Suggested-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130232048.14216-2-jose.souza@intel.com

Whenever possible we should stick with IS_GEN<n> checks.

Bitmaks has been introduced on commit ae7617f0 ("drm/i915:
Allow optimized platform checks") for efficiency.

Let's stick with it whenever possible.

This patch was generated with coccinelle:

spatch -sp_file is_gen.cocci *{c,h} --in-place

is_gen.cocci:
@gen2@ expression e; @@
-INTEL_GEN(e) == 2
+IS_GEN2(e)
@gen3@ expression e; @@
-INTEL_GEN(e) == 3
+IS_GEN3(e)
@gen4@ expression e; @@
-INTEL_GEN(e) == 4
+IS_GEN4(e)
@gen5@ expression e; @@
-INTEL_GEN(e) == 5
+IS_GEN5(e)
@gen6@ expression e; @@
-INTEL_GEN(e) == 6
+IS_GEN6(e)
@gen7@ expression e; @@
-INTEL_GEN(e) == 7
+IS_GEN7(e)
@gen8@ expression e; @@
-INTEL_GEN(e) == 8
+IS_GEN8(e)
@gen9@ expression e; @@
-INTEL_GEN(e) == 9
+IS_GEN9(e)
@gen10@ expression e; @@
-INTEL_GEN(e) == 10
+IS_GEN10(e)
@gen11@ expression e; @@
-INTEL_GEN(e) == 11
+IS_GEN11(e)

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026195143.20353-1-rodrigo.vivi@intel.com

Add plane alpha blending support with the different blend modes.
This has been tested on a icl to show the correct results,
on earlier platforms small rounding errors cause issues. But this
already happens case with fully transparant or fully opaque RGB8888
fb's.

The recommended HW workaround is to disable alpha blending when the
plane alpha is 0 (transparant, hide plane) or 0xff (opaque, disable blending).
This is easy to implement on any platform, so just do that.

The tests for userspace are also available, and pass on gen11.

Changes since v1:
- Change mistaken < 0xff0 to 0xff00.
- Only set PLANE_KEYMSK_ALPHA_ENABLE when plane alpha < 0xff00, ignore blend mode.
- Rework disabling FBC when per pixel alpha is used.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Change MISSING_CASE default to explicit alpha disable (mattrope)]
Link: https://patchwork.freedesktop.org/patch/msgid/20180815103405.22679-1-maarten.lankhorst@linux.intel.comReviewed-by: NMatt Roper <matthew.d.roper@intel.com>

Make the main/aux surface stuff a bit more generic by using an array
of structures. This will allow us to deal with both the main and aux
surfaces with common code.
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-5-ville.syrjala@linux.intel.com

The only time we should start FBC is when we have waited a vblank
after the atomic update. We've already forced a vblank wait by doing
wait_for_flip_done before intel_post_plane_update(), so we don't need
to wait a second time before enabling.

Removing the worker simplifies the code and removes possible race
conditions, like happening in 103167.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103167Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625163758.10871-2-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

There is a small race window in which FBC can be enabled after
pre_plane_update is called, but before the page flip has been
queued or completed.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103167
Link: https://patchwork.freedesktop.org/patch/msgid/20180625163758.10871-1-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Adding a i915_fifo_underrun_reset debugfs file will make it possible
for IGT tests to clear FIFO underrun fallout at the start of each
subtest, and make re-enable FBC so tests always have maximum exposure
to features used by IGT. FIFO underruns and FBC bugs will no longer
hide when an earlier subtests disables both.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=105685
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105681
Link: https://patchwork.freedesktop.org/patch/msgid/20180328100526.36467-1-maarten.lankhorst@linux.intel.comAcked-by: NJani Nikula <jani.nikula@linux.intel.com>
[mlankhorst: Reset FBC reason if underrun had occurred. (vivijim)]
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

If i915.enable_fbc is cleared at runtime, but FBC was previously enabled
then we don't disable FBC until the next time the crtc is disabled.

Make sure that if the module param is changed, we disable FBC in
intel_fbc_post_update so we never have to worry about disabling.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180305123608.20665-1-maarten.lankhorst@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Enabling FBC on a plane having a Y-offset that isn't divisible by 4 may
cause pipe FIFO underruns and flickers, so disable FBC on such a config.

I tried the followings to work around the issue:
- enable each HW work around in ILK_DPFC_CHICKEN
- disable each compression algorithm in ILK_DPFC_CONTROL
- disable low-power watermarks
None of the above got rid of the problem. I haven't found this issue in
the Bspec/WA database either.

Besides the igt testcase below (yet to be merged) an easy way to
reproduce the issue is to enable a plane with FBC and a plane Y-offset
not aligned to 4 and then just enable/disable FBC in a loop, keeping the
plane enabled.

I could trigger the problem on BXT/GLK/SKL/CNL, so assume for now that it's
only present on GEN9 and GEN10.

v2: (Ville)
- Run the test/apply the WA on CNL as well.
- Use IS_GEN() instead of INTEL_GEN().
- Fix spelling.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Testcase: igt/kms_plane/plane-clipping-pipe-A-planes
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301134457.13974-1-imre.deak@intel.com

Currently the FBC code doesn't handle the 90/270 degree rotated case
correctly. We would need the GTT tracking to monitor the fence on the
normal GTT view (the rotated view doesn't even have a fence). Not quite
sure how we should program the fence Y offset etc. in that case. For now
we'll end up disabling FBC with 90/270 degree rotation. Add a FIXME
to remind people about this fact.

v2: Reword the text (Chris)
    Move the FIXME to the fbc code

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-7-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Let's record the information whether a plane can do fbc or not under
struct inte_plane.

v2: Rebase due to i9xx_plane_id
    Handle BDW/HSW correctly
v3: Move inte_fbc_init() back since we depend on it happening
    even with i915.disable_display, and populate
    fbc->possible_framebuffer_bits directly from the
    plane init code instead
v4: Add note about plane A being tied to pipe A on HSW+

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221173101.19385-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-5-ville.syrjala@linux.intel.com

Rather than trusting the cached value of plane_state->vma->fence to
imply whether the plane_state itself holds a reference on the
framebuffer's fence, use the information provided in the
plane_state->flags (PLANE_HAS_FENCE). Note that we still assume that FBC
is entirely bounded by the plane_state active life span; it's not clear
if that is a safe assumption.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220134208.24988-4-chris@chris-wilson.co.uk