- 06 10月, 2009 10 次提交
-
-
由 Tejun Heo 提交于
Till now only one board, ASUS M2A-VM, can do 64bit dma with recent BIOSen. Enabling 64bit DMA by default already broke three boards. Enabling 64bit DMA isn't worth these regressions. Disable 64bit DMA by default and enable it only on boards which are known to work. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NGabriele Balducci <balducci@units.it> Reported-by: maierp@informatik.tu-muenchen.de Cc: Shane Huang <shane.huang@amd.com> Cc: stable@kernel.org Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.32' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: add support for change_pte mmu notifiers KVM: MMU: add SPTE_HOST_WRITEABLE flag to the shadow ptes KVM: MMU: dont hold pagecount reference for mapped sptes pages KVM: Prevent overflow in KVM_GET_SUPPORTED_CPUID KVM: VMX: flush TLB with INVEPT on cpu migration KVM: fix LAPIC timer period overflow KVM: s390: fix memsize >= 4G KVM: SVM: Handle tsc in svm_get_msr/svm_set_msr correctly KVM: SVM: Fix tsc offset adjustment when running nested
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Clear sticky FSR register after saving it to func parametr microblaze: UMS is used only for MMU kernel
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: using HZ needs an include of linux/param.h sparc32: convert to asm-generic/hardirq.h sparc64: Cache per-cpu %pcr register value in perf code. sparc64: Fix comment typo in perf_event.c sparc64: Minor coding style fixups in perf code. sparc64: Add a basic conflict engine in preparation for multi-counter support. sparc64: Increase vmalloc size to fix percpu regressions. sparc64: Add initial perf event conflict resolution and checks. sparc: Niagara1 perf event support. sparc: Add Niagara2 HW cache event support. sparc: Support all ultra3 and ultra4 derivatives. sparc: Support HW cache events.
-
由 Jan Beulich 提交于
In virtual environments (namely, Xen Dom0) virt <-> phys and virt <-> isa-bus translations cannot be freely interchanged (and even outside such environments it is not really correct to do so). When looking at memory below 1M, the latter translations should always be used. iscsi_ibft_find.c part from: Martin Wilck <martin.wilck@ts.fujitsu.com>. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NPeter Jones <pjones@redhat.com> Signed-off-by: NKonrad Rzeszutek Wilk <ketuzsezs@darnok.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Run generate-cmdlist.sh properly perf_event: Clean up perf_event_init_task() perf_event: Fix event group handling in __perf_event_sched_*() perf timechart: Add a power-only mode perf top: Add poll_idle to the skip list
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimer: Remove overly verbose "switch to high res mode" message
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kmemtrace: Fix up tracer registration tracing: Fix infinite recursion in ftrace_update_pid_func()
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Don't leak 64-bit kernel register values to 32-bit processes x86, SLUB: Remove unused CONFIG FAST_CMPXCHG_LOCAL x86: earlyprintk: Fix regression to handle serial,ttySn as 1 arg x86: Don't generate cmpxchg8b_emu if CONFIG_X86_CMPXCHG64=y x86: Fix csum_ipv6_magic asm memory clobber x86: Optimize cmpxchg64() at build-time some more
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix rename of pt_regs offset defines breakage m68knommu: remove duplicated #include m68knommu: show KiB rather than pages in "Freeing initrd memory:" message
-
- 05 10月, 2009 22 次提交
-
-
由 Michal Simek 提交于
Previous patch d63678d607d0e37ec7abe5ceb545d7e8aab956a4 clear it for noMMU kernel. This one do it for MMU. Correct noMMU version Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
I'm skipping -rc2 because the -rc1 Makefile mistakenly said -rc2, so in order to avoid confusion, I'm jumping from -rc1 to -rc3. That way, when 'uname' (or an oops report) says 2.6.32-rc2, there's no confusion about whether people perhaps meant -rc1 or -rc2.
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'acpi-pad' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: acpi_pad: build only on X86 ACPI: create Processor Aggregator Device driver Fixup trivial conflicts in MAINTAINERS file.
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6由 Linus Torvalds 提交于
* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6: SFI: remove __init from sfi_verify_table SFI: fix section mismatch warnings in sfi_core.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: EC: Don't parse DSDT for EC early init on Compal ACPI: EC: Rewrite DMI checks ACPI: dock: fix "sibiling" typo ACPI: kill overly verbose "throttling states" log messages ACPI: Fix bound checks for copy_from_user in the acpi /proc code ACPI: fix bus scanning memory leaks ACPI: EC: Restart command even if no interrupts from EC sony-laptop: Don't unregister the SPIC driver if it wasn't registered sony-laptop: remove _INI call at init time sony-laptop: SPIC unset IRQF_SHARED, set IRQF_DISABLED sony-laptop: remove device_ctrl and the SPIC mini drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: macintosh: Don't assume i2c device probing always succeeds i2c: Hide probe errors caused by ACPI resource conflicts i2c: Minor documentation update mfd: AB3100 drop unused module parameters Staging: IIO: tsl2561: Drop unused module parameters leds: leds-pca9532 - Drop unused module parameters ltc4215/ltc4245: Discard obsolete detect methods ds2482: Discard obsolete detect method max6875: Discard obsolete detect method i2c: Move misc devices documentation
-
由 Jean Delvare 提交于
If i2c device probing fails, then there is no driver to dereference after calling i2c_new_device(). Stop assuming that probing will always succeed, to avoid NULL pointer dereferences. We have an easier access to the driver anyway. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NTim Shepard <shep@alum.mit.edu> Cc: Colin Leroy <colin@colino.net>
-
由 Jean Delvare 提交于
When an ACPI resource conflict is detected, error messages are already printed by ACPI. There's no point in causing the driver core to print more error messages, so return one of the error codes for which no message is printed. This fixes bug #14293: http://bugzilla.kernel.org/show_bug.cgi?id=14293Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The sysfs path to i2c adapters has changed recently, update the documentation to reflect that change. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The I2C_CLIENT_INSMOD_1 macro is only useful for i2c drivers which implement device detection. The ab3100 driver doesn't, so there is no point in calling it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Cc: Samuel Ortiz <sameo@linux.intel.com>
-
由 Jean Delvare 提交于
The I2C_CLIENT_INSMOD macro is only useful for i2c drivers which implement device detection. The tsl2561 driver doesn't, so there is no point in calling it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Jonathan Cameron <jic23@cam.ac.uk>
-
由 Jean Delvare 提交于
The I2C_CLIENT_INSMOD_1 macro is only useful for i2c drivers which implement device detection. The leds-pca9532 driver doesn't, so there is no point in calling it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Riku Voipio <riku.voipio@iki.fi>
-
由 Jean Delvare 提交于
There is no point in implementing a detect callback for the LTC4215 and LTC4245, as these devices can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callbacks. This shrinks the binary module sizes by 36% and 46%, respectively. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Ira W. Snyder <iws@ovro.caltech.edu>
-
由 Jean Delvare 提交于
There is no point in implementing a detect callback for the DS2482, as this device can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callback. This shrinks the binary module size by 21%. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NBen Gardner <gardner.ben@gmail.com>
-
由 Jean Delvare 提交于
There is no point in implementing a detect callback for the MAX6875, as this device can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callback. This basically divides the binary module size by 2. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NBen Gardner <gardner.ben@gmail.com>
-
由 Jean Delvare 提交于
Some times ago the eeprom and max6875 drivers moved to drivers/misc/eeprom, but their documentation did not follow. It's finally time to get rid of Documentation/i2c/chips. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Ben Gardner <gardner.ben@gmail.com> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (41 commits) Revert "Seperate read and write statistics of in_flight requests" cfq-iosched: don't delay async queue if it hasn't dispatched at all block: Topology ioctls cfq-iosched: use assigned slice sync value, not default cfq-iosched: rename 'desktop' sysfs entry to 'low_latency' cfq-iosched: implement slower async initiate and queue ramp up cfq-iosched: delay async IO dispatch, if sync IO was just done cfq-iosched: add a knob for desktop interactiveness Add a tracepoint for block request remapping block: allow large discard requests block: use normal I/O path for discard requests swapfile: avoid NULL pointer dereference in swapon when s_bdev is NULL fs/bio.c: move EXPORT* macros to line after function Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs cciss: fix build when !PROC_FS block: Do not clamp max_hw_sectors for stacking devices block: Set max_sectors correctly for stacking devices cciss: cciss_host_attr_groups should be const cciss: Dynamically allocate the drive_info_struct for each logical drive. cciss: Add usage_count attribute to each logical drive in /sys ...
-
由 Jens Axboe 提交于
This reverts commit a9327cac. Corrado Zoccolo <czoccolo@gmail.com> reports: "with 2.6.32-rc1 I started getting the following strange output from "iostat -kx 2": Linux 2.6.31bisect (et2) 04/10/2009 _i686_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 10,70 0,00 3,16 15,75 0,00 70,38 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 18,22 0,00 0,67 0,01 14,77 0,02 43,94 0,01 10,53 39043915,03 2629219,87 sdb 60,89 9,68 50,79 3,04 1724,43 50,52 65,95 0,70 13,06 488437,47 2629219,87 avg-cpu: %user %nice %system %iowait %steal %idle 2,72 0,00 0,74 0,00 0,00 96,53 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 avg-cpu: %user %nice %system %iowait %steal %idle 6,68 0,00 0,99 0,00 0,00 92,33 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 avg-cpu: %user %nice %system %iowait %steal %idle 4,40 0,00 0,73 1,47 0,00 93,40 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 4,00 0,00 3,00 0,00 28,00 18,67 0,06 19,50 333,33 100,00 Global values for service time and utilization are garbage. For interval values, utilization is always 100%, and service time is higher than normal. I bisected it down to: [a9327cac] Seperate read and write statistics of in_flight requests and verified that reverting just that commit indeed solves the issue on 2.6.32-rc1." So until this is debugged, revert the bad commit. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We cannot delay for the first dispatch of the async queue if it hasn't dispatched at all, since that could present a local user DoS attack vector using an app that just did slow timed sync reads while filling memory. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 04 10月, 2009 8 次提交
-
-
由 Izik Eidus 提交于
this is needed for kvm if it want ksm to directly map pages into its shadow page tables. [marcelo: cast pfn assignment to u64] Signed-off-by: NIzik Eidus <ieidus@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Izik Eidus 提交于
this flag notify that the host physical page we are pointing to from the spte is write protected, and therefore we cant change its access to be write unless we run get_user_pages(write = 1). (this is needed for change_pte support in kvm) Signed-off-by: NIzik Eidus <ieidus@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Izik Eidus 提交于
When using mmu notifiers, we are allowed to remove the page count reference tooken by get_user_pages to a specific page that is mapped inside the shadow page tables. This is needed so we can balance the pagecount against mapcount checking. (Right now kvm increase the pagecount and does not increase the mapcount when mapping page into shadow page table entry, so when comparing pagecount against mapcount, you have no reliable result.) Signed-off-by: NIzik Eidus <ieidus@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
The number of entries is multiplied by the entry size, which can overflow on 32-bit hosts. Bound the entry count instead. Reported-by: NDavid Wagner <daw@cs.berkeley.edu> Cc: stable@kernel.org Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
It is possible that stale EPTP-tagged mappings are used, if a vcpu migrates to a different pcpu. Set KVM_REQ_TLB_FLUSH in vmx_vcpu_load, when switching pcpus, which will invalidate both VPID and EPT mappings on the next vm-entry. Cc: stable@kernel.org Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Aurelien Jarno 提交于
Don't overflow when computing the 64-bit period from 32-bit registers. Fixes sourceforge bug #2826486. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Cc: stable@kernel.org Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Christian Borntraeger 提交于
commit 628eb9b8 KVM: s390: streamline memslot handling introduced kvm_s390_vcpu_get_memsize. This broke guests >=4G, since this function returned an int. This patch changes the return value to a long. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
When running nested we need to touch the l1 guests tsc_offset. Otherwise changes will be lost or a wrong value be read. Cc: stable@kernel.org Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-