On GFX9+, format modifiers are always enabled and ensure the
frame-buffers can be scanned out at ADDFB2 time.

On GFX8-, format modifiers are not supported and no other check
is performed. This means ADDFB2 IOCTLs will succeed even if the
tiling isn't supported for scan-out, and will result in garbage
displayed on screen [1].

Fix this by adding a check for tiling flags for GFX8 and older.
The check is taken from radeonsi in Mesa (see how is_displayable
is populated in gfx6_compute_surface).

Changes in v2: use drm_WARN_ONCE instead of drm_WARN (Michel)

[1]: https://github.com/swaywm/wlroots/issues/3185Signed-off-by: NSimon Ser <contact@emersion.fr>
Acked-by: NMichel Dänzer <mdaenzer@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The commit 2766534b added the offset
header but didn't add the masks.  This adds the masks based on what
was selected for the offsets.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
pci deviceid not passed to dal dc, without proper break,
dcn2.x falls into dcn3.x code path

[how]
pass in pci deviceid, and break once dal_version initialized.
Reviewed-by: NZhan Liu <Zhan.Liu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Recently debugging efforts have involved setting/checking the
X.Y value used during payload allocation. Current output for
Y was calculated with incorrect bitshift. Y value is also not
human readable.

[How]
Refactor logging into separate function. Fix Y calculation error
and format output to be human readable.
Reviewed-by: NWenjing Liu <wenjing.liu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NGeorge Shen <george.shen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why/How]
Theoretically rare corner case where ceil(Y) results in rounding
up to an integer. If this happens, the 1 should be carried over to
the X value.
Reviewed-by: NWenjing Liu <wenjing.liu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NGeorge Shen <george.shen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
There is a chance verified link cap can be greater than max link cap.
This causes software hang because we cannot power up PHY with link rate
that cannot handle.
The change is to guard verfieid link cap from becoming larger than max link cap
our PHy can support.
Reviewed-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Stack variable params.backlight_ramping_override is uninitialized, so it
contains junk data

[How]
Initialize the variable to false
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NJosip Pavic <Josip.Pavic@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Blnd, 3dlut, and shaper LUT select registers are double buffered, however
their accompanying LUT memory shutdown registers are not. As a result,
shutting down LUT memory immediately after setting a block to bypass causes
corruption as bypass only happens at next Vupdate.

[HOW]
Re-enable mem low power for CM block
Force optimization on next flip and disable LUT memory during optimization
sequence if LUT select field is then set to bypass

v2: squash in CONFIG_DRM_AMD_DC_DCN fix (Alex)
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DC should be used in place of DAL in
upstream.

[How]
Replace dal with dc in function names.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:
- Fixes to backlight, LUT, PPS, MST
- Use correct vpg for 128b/132b encoding
- Improved logging for VCP
- Replace referral of dal with dc
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NOliver Logush <oliver.logush@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
This change is needed for DCN2 to make use of the immediate_update
flag. With this flag, update to PPS will be immediate, rather than
always taking place on dig_update signal.

[How]
Set AFMT_GENERIC7_FRAME/IMMEDIATE_UPDATE bits depending on flag
value.
Reviewed-by: NWenjing Liu <wenjing.liu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NIlya <Ilya.Bakoulin@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
MST streams share the same link and should share the same encoder.
The current availability check may erroneously determine that an
encoder is unavailable for MST streams.

[How]
When checking for link encoder availability, check if an encoder
in use shares a link with the stream for which the availability
check is being conducted. If the link is shared, then the link
encoder should be shared too and will be deemed available.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Link encoder in the link could be null for certain links.

[How]
If link encoder in the link is null then get the link encoder
from the stream.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NMeenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Unify the code which handles the conversion between hw lane setting
and dpcd lane setting.

v2: squash in unused variable fixes (Alex)
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
To support per lane lane setting adjustment, we need to change cur_lane_setting
to an array one for each lane as the first step.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Requested feature to assist with Thermal, Acoustic, Power, and
Performance tuning.

[How]
Add a debug field that will override calculated minimum DRAM clock,
if the debug value is larger than the calculate value.
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To prevent unnecessary wake up of DMCUB when ABM is enabled without PSR
enabled, driver will notify DMCUB to stop ABM's vertical interrupts
if vsync is disabled and steady state is reached.

[How]
Send inbox message to notify ABM pause based on vsync on/off
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
AFMT is unused for DP audio, so powering it on for DP is unnecessary.

[HOW]
APG block should be powered down instead, however HW defaults to shutdown
state when not enabled so no further work is required.
Reviewed-by: NWenjing Liu <wenjing.liu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
128b/132b uses the vpg instance assigned to hpo dp stream encoder.
The current vpg used is assigned to dio stream encoder.
This is incorrect and cause display black screen because the
actual vpg is powered off.
Reviewed-by: NMichael Strauss <michael.strauss@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

didn't read the value of mmCP_HQD_QUANTUM from correct
register offset
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In ras poison mode, umc uncorrectable error will be ignored until
the corrupted data consumed by another ras module (such as gfx, sdma).

v2: update the debug message and replace dev_warn with dev_info.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add RAS poison supported flag and tell PSP RAS TA about the info.

v2: rename poison mode to poison supported, we can also disable poison
mode even we support it.
    print value of poison supported if ras feature enablement fails.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add ras poison mode query interface for UMC.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add ras poison mode query interface for DF.

v2: replace RREG32_PCIE with RREG32_SOC15.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Updated invoke to use new common TA structure similarily to load/unload.
Signed-off-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
ASSR is dependent on Signed PSP Verstage to enable Content
Protection for eDP panels. Unsigned PSP verstage is used
during development phase causing ASSR to FAIL.
As a result, link training is performed with
DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for
eDP panels that causes display flicker on some panels.

[How]
- Do not change panel mode, if ASSR is disabled
- Just report and continue to perform eDP link training
with right settings further.
Signed-off-by: NPraful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

gmc_v{9,10}_0_gart_disable() isn't called matched with
correspoding gart_enbale function in SRIOV case. This will
lead to gart.bo pin_count leak on driver unload.

Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NLeslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-5.16-2021-09-27' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.16-2021-09-27:

amdgpu:
- RAS improvements
- BACO fixes
- Yellow Carp updates
- Misc code cleanups
- Initial DP 2.0 support
- VCN priority handling
- Cyan Skillfish updates
- Rework IB handling for multimedia engine tests
- Backlight fixes
- DCN 3.1 power saving improvements
- Runtime PM fixes
- Modifier support for DCC image stores for gfx 10.3
- Hotplug fixes
- Clean up stack related warnings in display code
- DP alt mode fixes
- Display rework for better handling FP code
- Debugfs fixes

amdkfd:
- SVM fixes
- DMA map fixes

radeon:
- AGP fix

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927212653.4575-1-alexander.deucher@amd.comSigned-off-by: NDave Airlie <airlied@redhat.com>

drm-misc-next for 5.15:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

Driver Changes:
  - Conversions to dev_err_probe() helper
  - rockchip: Various build improvements, Use
    DRM_BRIDGE_ATTACH_NO_CONNECTOR for LVDS and RGB
  - panel: New panel-edp driver
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923074522.zaja7mzxeimxf6g3@gilmour

It's not used outside of soc15.c
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update the current state as boot state during dpm initialization.
During the subsequent initialization, set_power_state gets called to
transition to the final power state. set_power_state refers to values
from the current state and without current state populated, it could
result in NULL pointer dereference.

For ex: on platforms where PCI speed change is supported through ACPI
ATCS method, the link speed of current state needs to be queried before
deciding on changing to final power state's link speed. The logic to query
ATCS-support was broken on certain platforms. The issue became visible
when broken ATCS-support logic got fixed with commit
f9b7f370 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)").

Bug:https://gitlab.freedesktop.org/drm/amd/-/issues/1698Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

All code paths under the EAGAIN path in RAS late init are unused.
Signed-off-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Explicity post warning if cmd is issued against unsupported IP

Update to latest RAS TA interface
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Device manager releases device-specific resources when a driver
disconnects from a device, devm_memunmap_pages and
devm_release_mem_region calls in svm_migrate_fini are redundant.

It causes below warning trace after patch "drm/amdgpu: Split
amdgpu_device_fini into early and late", so remove function
svm_migrate_fini.

BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718

WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795
devm_release_action+0x51/0x60
Call Trace:
    ? memunmap_pages+0x360/0x360
    svm_migrate_fini+0x2d/0x60 [amdgpu]
    kgd2kfd_device_exit+0x23/0xa0 [amdgpu]
    amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu]
    amdgpu_device_fini_sw+0x45/0x290 [amdgpu]
    amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
    drm_dev_release+0x20/0x40 [drm]
    release_nodes+0x196/0x1e0
    device_release_driver_internal+0x104/0x1d0
    driver_detach+0x47/0x90
    bus_remove_driver+0x7a/0xd0
    pci_unregister_driver+0x3d/0x90
    amdgpu_exit+0x11/0x20 [amdgpu]
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If svm migration init failed to create pgmap for device memory, set
pgmap type to 0 to disable device SVM support capability.
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update RAS infrastructure to support RAS query for MCA subblocks
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

adev->rmmio is set to be NULL in amdgpu_device_unmap_mmio to prevent
access after pci_remove, however, in SRIOV case, amdgpu_virt_release_full_gpu
will still use adev->rmmio for access after amdgpu_device_unmap_mmio.
The patch is to move such SRIOV calling earlier to fini_early stage.

Fixes: 07775fc1 ("drm/amdgpu: Unmap all MMIO mappings")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NLeslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>