Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 09 11月, 2012 6 次提交
  3. 30 10月, 2012 1 次提交
    • P
      ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer · 37c67d03
      由 Paul Walmsley 提交于 
      The OMAP watchdog timer driver directly calls a function exported by
code in arch/arm/mach-omap2.  This is not good; it tightly couples
this driver to the mach-omap2 integration code.  Instead, add a
temporary platform_data function pointer to abstract this function
call.  A subsequent patch will convert the watchdog driver to use this
function pointer.

This patch also moves the device creation code out of
arch/arm/mach-omap2/devices.c and into arch/arm/mach-omap2/wd_timer.c.
This is another step towards the removal of
arch/arm/mach-omap2/devices.c.

Cc: Wim Van Sebroeck <wim@iguana.be>
Acked-by: NWim Van Sebroeck <wim@iguana.be>
[paul@pwsan.com: skip wd_timer device creation when DT blob is present]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      37c67d03
  5. 25 10月, 2012 4 次提交
  7. 21 10月, 2012 8 次提交
    • P
      ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver · 2bb2a5d3
      由 Paul Walmsley 提交于 
      The OMAP watchdog timer driver needs to determine what caused the SoC
to reset for its GETBOOTSTATUS ioctl.  So, define a set of standard
reset sources across OMAP SoCs.  For OMAP2xxx, 3xxx, and 4xxx SoCs,
define mappings from the SoC-specific reset source register bits to
the standardized reset source IDs.  Create SoC-specific PRM functions
that read the appropriate per-SoC register and use the mapping to
return the standardized reset bits.  Register the SoC-specific PRM
functions with the common PRM code via prm_register().  Create a
function in the common PRM code, prm_read_reset_sources(), that
calls the SoC-specific function, registered during boot.

This patch does not yet handle some SoCs, such as AM33xx.  Those SoCs
were not handled by the code this will replace.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      2bb2a5d3
    • P
      ARM: OMAP2+: CM: prepare for use of cm_ll_data function pointers · 21325b25
      由 Paul Walmsley 提交于 
      There are several CM operations which behave similarly across OMAP2+
SoCs, but which have slight differences in their underlying
implementations.

This patch creates the support code for this function pointer
registration process.  No function pointers are included yet, but a
subsequent patch will create these for the module IDLEST registers.

This patch allows other code to use CM-provided data and operations
without needing to know which SoC is currently in use.  A further
description of the concept is provided in the patch entitled
"ARM: OMAP2+: PRM: prepare for use of prm_ll_data function pointers".
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      21325b25
    • P
      ARM: OMAP2+: PRM: prepare for use of prm_ll_data function pointers · e24c3573
      由 Paul Walmsley 提交于 
      There are several PRM operations which behave similarly across OMAP2+
SoCs, but which have slight differences in their underlying
implementations.  For example, to fetch the SoC's last reset sources,
different registers are read across OMAP2xxx, 3xxx, and 44xx, and
different bits are used on each SoC.  But the information returned is
so similar that a single, common interface for drivers is useful.

This patch creates the support code for this function pointer
registration process.  No function pointers are included yet, but a
subsequent patch will create one for the reset source API.

To illustrate the end goal with the above reset source example, each
per-SoC driver will use its own low-level implementation function --
e.g., prm2xxx.c would contain omap2xxx_prm_read_reset_sources().  This
function would read the appropriate register and remap the register
bits to a standard set of reset source bits.  When the prm2xxx.c
driver is loaded, it would register this function with the common PRM
driver, prm.c.  prm.c would then export a common function,
omap_prm_read_reset_sources().  Calling it would call through to the
function pointer for the currently-registered SoC PRM driver.  This
will allow other drivers to use PRM-provided data and operations
without needing to know which SoC is currently in use.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      e24c3573
    • P
      ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM · 4bd5259e
      由 Paul Walmsley 提交于 
      Move the low-level SoC-specific clockdomain control functions into
cm*.c and prm*.c.  For example, OMAP2xxx low-level clockdomain
functions go into cm2xxx.c.  Then remove the unnecessary
clockdomain*xxx*.c files.

The objective is to centralize low-level CM and PRM register accesses
into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP
SoC-independent API to higher-level OMAP power management code.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NRajendra Nayak <rnayak@ti.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
      4bd5259e
    • P
      ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files · ff4ae5d9
      由 Paul Walmsley 提交于 
      Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and
OMAP2xxx-specific macros into cm2xxx.[ch].  Move basic CM register
access functions into static inline functions in cm2xxx_3xxx.h,
leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c.

As part of this, split the CM and hwmod code that waits for devices to
become ready into SoC-specific functions.

This is in preparation for the upcoming move of this code to drivers/.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
      ff4ae5d9
    • P
      ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRM · 49815399
      由 Paul Walmsley 提交于 
      Move the low-level SoC-specific powerdomain control functions into
prm*.c.  For example, OMAP2xxx low-level powerdomain functions go into
prm2xxx.c.  Then remove the unnecessary powerdomain*xxx*.c files.

The objective is to centralize low-level PRM register accesses into
the prm*.[ch] files, and then to export an OMAP SoC-independent API to
higher-level OMAP power management code.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NRajendra Nayak <rnayak@ti.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
      49815399
    • P
      ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific files · 139563ad
      由 Paul Walmsley 提交于 
      Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and
OMAP2xxx-specific macros into prm2xxx.h.  (prm2xxx.c will be created
by a subsequent patch when it's needed.)  Move basic PRM register
access functions into static inline functions in prm2xxx_3xxx.h, leaving
only OMAP2/3 hardreset functions in prm2xxx_3xxx.c.

Also clarify the initcall function naming to reinforce that this code
is specifically for the PRM IP block.

This is in preparation for the upcoming powerdomain series and the
upcoming move of this code to drivers/.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
      139563ad
    • P
      ARM: OMAP2+: PRM: remove PRM weak functions · 7a0c1933
      由 Paul Walmsley 提交于 
      Remove the now-unused PRM weak functions from prm_common.c.  These
were formerly used to ensure that some OMAP2/3 PRM code would build on
OMAP4, but none of those functions ever would have worked on OMAP4 due
to an incompatible PRM register layout.  Now all that has been cleaned
up and these can be removed.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
      7a0c1933
  9. 19 10月, 2012 9 次提交
  11. 18 10月, 2012 10 次提交
  13. 17 10月, 2012 2 次提交