1. 31 3月, 2010 1 次提交
  2. 19 3月, 2010 4 次提交
    • C
      Btrfs: fix the inode ref searches done by btrfs_search_path_in_tree · 8ad6fcab
      Chris Mason 提交于
      This is used by the inode lookup ioctl to follow all the backrefs up
      to the subvol root.  But the search being done would sometimes land one
      past the last item in the leaf instead of finding the backref.
      
      This changes the search to look for the highest possible backref and hop
      back one item.  It also fixes a leaked path on failure to find the root.
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      8ad6fcab
    • C
      Btrfs: allow treeid==0 in the inode lookup ioctl · 1b53ac4d
      Chris Mason 提交于
      When a root id of 0 is sent to the inode lookup ioctl, it will
      use the root of the file we're ioctling and pass the root id
      back to userland along with the results.
      
      This allows userland to do searches based on that root later on.
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      1b53ac4d
    • C
      Btrfs: return keys for large items to the search ioctl · 90fdde14
      Chris Mason 提交于
      The search ioctl was skipping large items entirely (ones that are too
      big for the results buffer).  This changes things to at least copy
      the item header so that we can send information about the item back to
      userland.
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      90fdde14
    • C
      Btrfs: fix key checks and advance in the search ioctl · abc6e134
      Chris Mason 提交于
      The search ioctl was working well for finding tree roots, but using it for
      generic searches requires a few changes to how the keys are advanced.
      This treats the search control min fields for objectid, type and offset
      more like a key, where we drop the offset to zero once we bump the type,
      etc.
      
      The downside of this is that we are changing the min_type and min_offset
      fields during the search, and so the ioctl caller needs extra checks to make sure
      the keys in the result are the ones it wanted.
      
      This also changes key_in_sk to use btrfs_comp_cpu_keys, just to make
      things more readable.
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      abc6e134
  3. 17 3月, 2010 3 次提交
  4. 15 3月, 2010 23 次提交
    • N
      Btrfs: fix gfp flags masking in the compression code · ef5780c0
      Nick Piggin 提交于
      GFP_FS must be masked out, NOFS can't be or'd in.
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      ef5780c0
    • C
      Btrfs: don't look at bio flags after submit_bio · 5ff7ba3a
      Chris Mason 提交于
      After callling submit_bio, the bio can be freed at any time.  The
      btrfs submission thread helper was checking the bio flags too late,
      which might not give the correct answer.
      
      When CONFIG_DEBUG_PAGE_ALLOC is turned on, it can lead to oopsen.
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      5ff7ba3a
    • X
      btrfs: using btrfs_stack_device_id() get devid · a343832f
      Xiao Guangrong 提交于
      We can use btrfs_stack_device_id() to get dev_item->devid
      Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      a343832f
    • A
      btrfs: use memparse · 91748467
      Akinobu Mita 提交于
      Use memparse() instead of its own private implementation.
      Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Chris Mason <chris.mason@oracle.com>
      Cc: linux-btrfs@vger.kernel.org
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      91748467
    • J
      Btrfs: add a "df" ioctl for btrfs · 1406e432
      Josef Bacik 提交于
      df is a very loaded question in btrfs.  This gives us a way to get the per-space
      usage information so we can tell exactly what is in use where.  This will help
      us figure out ENOSPC problems, and help users better understand where their disk
      space is going.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      1406e432
    • J
      Btrfs: cache the extent state everywhere we possibly can V2 · 2ac55d41
      Josef Bacik 提交于
      This patch just goes through and fixes everybody that does
      
      lock_extent()
      blah
      unlock_extent()
      
      to use
      
      lock_extent_bits()
      blah
      unlock_extent_cached()
      
      and pass around a extent_state so we only have to do the searches once per
      function.  This gives me about a 3 mb/s boots on my random write test.  I have
      not converted some things, like the relocation and ioctl's, since they aren't
      heavily used and the relocation stuff is in the middle of being re-written.  I
      also changed the clear_extent_bit() to only unset the cached state if we are
      clearing EXTENT_LOCKED and related stuff, so we can do things like this
      
      lock_extent_bits()
      clear delalloc bits
      unlock_extent_cached()
      
      without losing our cached state.  I tested this thoroughly and turned on
      LEAK_DEBUG to make sure we weren't leaking extent states, everything worked out
      fine.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      2ac55d41
    • J
      Btrfs: cache ordered extent when completing io · 5a1a3df1
      Josef Bacik 提交于
      When finishing io we run btrfs_dec_test_ordered_pending, and then immediately
      run btrfs_lookup_ordered_extent, but btrfs_dec_test_ordered_pending does that
      already, so we're searching twice when we don't have to.  This patch lets us
      pass a btrfs_ordered_extent in to btrfs_dec_test_ordered_pending so if we do
      complete io on that ordered extent we can just use the one we found then instead
      of having to do another btrfs_lookup_ordered_extent.  This made my fio job with
      the other patch go from 24 mb/s to 29 mb/s.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      5a1a3df1
    • J
      Btrfs: cache extent state in find_delalloc_range · c2a128d2
      Josef Bacik 提交于
      This patch makes us cache the extent state we find in find_delalloc_range since
      we'll have to lock the extent later on in the function.  This will keep us from
      re-searching for the rang when we try to lock the extent.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      c2a128d2
    • J
      Btrfs: change the ordered tree to use a spinlock instead of a mutex · 49958fd7
      Josef Bacik 提交于
      The ordered tree used to need a mutex, but currently all we use it for is to
      protect the rb_tree, and a spin_lock is just fine for that.  Using a spin_lock
      instead makes dbench run a little faster, 58 mb/s instead of 51 mb/s, and have
      less latency, 3445.138 ms instead of 3820.633 ms.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      49958fd7
    • C
      Btrfs: finish read pages in the order they are submitted · 4125bf76
      Chris Mason 提交于
      The endio is done at reverse order of bio vectors.
      
      That means for a sequential read, the page first submitted will finish
      last in a bio. Considering we will do checksum (making cache hot) for
      every page, this does introduce delay (and chance to squeeze cache used
      soon) for pages submitted at the begining.
      
      I don't observe obvious performance difference with below patch at my
      simple test, but seems more natural to finish read in the order they are
      submitted.
      Signed-off-by: NShaohua Li <shaohua.li@intel.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      4125bf76
    • M
      btrfs: fix btrfs_mkdir goto for no free objectids · 0be2e981
      Miao Xie 提交于
      btrfs_mkdir() must jump to the place of ending transaction after
      btrfs_find_free_objectid() failed. Or this transaction can't end.
      Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      0be2e981
    • S
      Btrfs: flush data on snapshot creation · 0bdb1db2
      Sage Weil 提交于
      Flush any delalloc extents when we create a snapshot, so that recently
      written file data is always included in the snapshot.
      
      A later commit will add the ability to snapshot without the flush, but
      most people expect flushing.
      Signed-off-by: NSage Weil <sage@newdream.net>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      0bdb1db2
    • J
      Btrfs: make df be a little bit more understandable · bd4d1088
      Josef Bacik 提交于
      The way we report df usage is way confusing for everybody, including some other
      utilities (bacula for one).  So this patch makes df a little bit more
      understandable.  First we make used actually count the total amount of used
      space in all space info's.  This will give us a real view of how much disk space
      is in use.  Second, for blocks available, only count data space.  This makes
      things like bacula work because it says 0 when you can no longer write anymore
      data to the disk.  I think this is a nice compromise, since you will end up with
      something like the following
      
      [root@alpha ~]# df -h
      Filesystem            Size  Used Avail Use% Mounted on
      /dev/mapper/VolGroup-lv_root
                            148G   30G  111G  21% /
      /dev/sda1             194M  116M   68M  64% /boot
      tmpfs                 985M   12K  985M   1% /dev/shm
      /dev/mapper/VolGroup-LogVol02
                            145G  140G     0 100% /mnt/btrfs-test
      
      Compare this with btrfsctl -i output
      
      [root@alpha btrfs-progs-unstable]# ./btrfsctl -i /mnt/btrfs-test/
      Metadata, DUP: total=4.62GB, used=2.46GB
      System, DUP: total=8.00MB, used=24.00KB
      Data: total=134.80GB, used=134.80GB
      Metadata: total=8.00MB, used=0.00
      System: total=4.00MB, used=0.00
      operation complete
      
      This way we show that there is no more data space to be used, but we have
      another 5GB of space left for metadata.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      bd4d1088
    • T
      btrfs: Update existing btrfs_device for renaming device · 3a0524dc
      TARUISI Hiroaki 提交于
      When we scan devices in a multi-device filesystem, we memorize the original
      name.  If the device gets a new name, later scans don't update the
      in-kernel structures related to it, and we're not able to mount the
      filesystem.
      
      This patch updates device name during scaning.
      Signed-off-by: NTARUISI Hiroaki <taruishi.hiroak@jp.fujitsu.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      3a0524dc
    • C
      Btrfs: add new defrag-range ioctl. · 1e701a32
      Chris Mason 提交于
      The btrfs defrag ioctl was limited to doing the entire file.  This
      commit adds a new interface that can defrag a specific range inside
      the file.
      
      It can also force compression on the file, allowing you to selectively
      compress individual files after they were created, even when mount -o
      compress isn't turned on.
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      1e701a32
    • C
      Btrfs: be more selective in the defrag ioctl · 940100a4
      Chris Mason 提交于
      The btrfs defrag ioctl had some bugs around delalloc accounting, and it
      wasn't properly skipping pages that were not in the mapping.
      
      It wasn't properly clearing the page checked flag, which could make the
      writeback code ignore the page forever while pinning it as dirty.
      
      This commit fixes those problems and makes defrag a little smarter.  It
      skips holes and it doesn't waste time defragging large extents.  If a
      tiny extent comes before a very large extent, it will defrag both of
      them to make sure the tiny extent ends up next to something big.
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      940100a4
    • C
      Btrfs: run the backing dev more often in the submit_bio helper · 51684082
      Chris Mason 提交于
      The submit_bio helper thread can decide to loop back around to
      service more bios.  This commit forces it to unplug first, which helps
      reduce the latency seen by submitters.
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      51684082
    • J
      Btrfs: make subvolid=0 mount the original default root · 4849f01d
      Josef Bacik 提交于
      Since theres not a good way to make sure the user sees the original default root
      tree id, and not to mention it's 5 so is way different than any other volume,
      just make subvol=0 mount the original default root.  This makes it a bit easier
      for users to handle in the long run.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      4849f01d
    • J
      Btrfs: add ioctl and incompat flag to set the default mount subvol · 6ef5ed0d
      Josef Bacik 提交于
      This patch needs to go along with my previous patch.  This lets us set the
      default dir item's location to whatever root we want to use as our default
      mounting subvol.  With this we don't have to use mount -o subvol=<tree id>
      anymore to mount a different subvol, we can just set the new one and it will
      just magically work.  I've done some moderate testing with this, mostly just
      switching the default mount around, mounting subvols and the default mount at
      the same time and such, everything seems to work.  Thanks,
      
      Older kernels would generally be able to still mount the filesystem with the
      default subvolume set, but it would result in a different volume being mounted,
      which could be an even more unpleasant suprise for users.  So if you set your
      default subvolume, you can't go back to older kernels.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      6ef5ed0d
    • J
      Btrfs: change how we mount subvolumes · 73f73415
      Josef Bacik 提交于
      This work is in preperation for being able to set a different root as the
      default mounting root.
      
      There is currently a problem with how we mount subvolumes.  We cannot currently
      mount a subvolume of a subvolume, you can only mount subvolumes/snapshots of the
      default subvolume.  So say you take a snapshot of the default subvolume and call
      it snap1, and then take a snapshot of snap1 and call it snap2, so now you have
      
      /
      /snap1
      /snap1/snap2
      
      as your available volumes.  Currently you can only mount / and /snap1,
      you cannot mount /snap1/snap2.  To fix this problem instead of passing
      subvolid=<name> you must pass in subvolid=<treeid>, where <treeid> is
      the tree id that gets spit out via the subvolume listing you get from
      the subvolume listing patches (btrfs filesystem list).  This allows us
      to mount /, /snap1 and /snap1/snap2 as the root volume.
      
      In addition to the above, we also now read the default dir item in the
      tree root to get the root key that it points to.  For now this just
      points at what has always been the default subvolme, but later on I plan
      to change it to point at whatever root you want to be the new default
      root, so you can just set the default mount and not have to mount with
      -o subvolid=<treeid>.  I tested this out with the above scenario and it
      worked perfectly.  Thanks,
      
      mount -o subvol operates inside the selected subvolid.  For example:
      
      mount -o subvol=snap1,subvolid=256 /dev/xxx /mnt
      
      /mnt will have the snap1 directory for the subvolume with id
      256.
      
      mount -o subvol=snap /dev/xxx /mnt
      
      /mnt will be the snap directory of whatever the default subvolume
      is.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      73f73415
    • J
      Btrfs: make set/get functions for the super compat_ro flags use compat_ro · 12534832
      Josef Bacik 提交于
      Our set/get functions for compat_ro_flags actually look at compat_flags.  This
      will mess any attempt to use compat flags up.  The fix is obvious.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      12534832
    • C
      Btrfs: add search and inode lookup ioctls · ac8e9819
      Chris Mason 提交于
      The search ioctl is a generic tool for doing btree searches from
      userland applications.  The first user of the search ioctl is a
      subvolume listing feature, but we'll also use it to find new
      files in a subvolume.
      
      The search ioctl allows you to specify min and max keys to search for,
      along with min and max transid.  It returns the items along with a
      header that includes the item key.
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      ac8e9819
    • T
      Btrfs: add a function to lookup a directory path by following backrefs · 98d377a0
      TARUISI Hiroaki 提交于
      This will be used by the inode lookup ioctl.
      Signed-off-by: NTARUISI Hiroaki <taruishi.hiroak@jp.fujitsu.com>
      Signed-off-by: NChris Mason <chris.mason@oracle.com>
      98d377a0
  5. 09 3月, 2010 2 次提交
  6. 13 2月, 2010 1 次提交
  7. 05 2月, 2010 6 次提交