A lot of modern laptops use the Parade PS8461E MUX for eDP
switching. The MUX can operate in jitter cleaning mode or
redriver mode, the first one resulting in higher link
quality. The jitter cleaning mode needs to know the link
rate used and the MUX achieves this by snooping the
LINK_BW_SET, LINK_RATE_SELECT and SUPPORTED_LINK_RATES
DPCD accesses.

When the MUX is powered down (seems this can happen whenever
the display is turned off) it loses track of the snooped
link rates so when we do the LINK_RATE_SELECT write it no
longer knowns which link rate we're selecting, and thus it
falls back to the lower quality redriver mode. This results
in unstable high link rates (eg. usually 8.1Gbps link rate
no longer works correctly).

In order to avoid all that let's re-snoop SUPPORTED_LINK_RATES
from the sink at the start of every link training.

Unfortunately we don't have a way to detect the presence of
the MUX. It looks like the set of laptops equipped with this
MUX is fairly large and contains devices from multiple
manufacturers. It may also still be growing with new models.
So a quirk doesn't seem like a very easily maintainable
option, thus we shall attempt to do this unconditionally on
all machines that use LINK_RATE_SELECT. Hopefully this extra
DPCD read doesn't cause issues for any unaffected machine.
If that turns out to be the case we'll need to convert this
into a quirk in the future.

Cc: stable@vger.kernel.org
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-1-ville.syrjala@linux.intel.comTested-by: NAaron Ma <aaron.ma@canonical.com>
Tested-by: NJason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
(cherry picked from commit 25899c59)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Turns out the MIPI sequence block version number and
new block size fields are considered part of the block
header and are not included in the reported new block size
field itself. Bump up the block size appropriately so that
we'll copy over the last five bytes of the block as well.

For this particular machine those last five bytes included
parts of the GPIO op for the backlight on sequence, causing
the backlight no longer to turn back on:

 		Sequence 6 - MIPI_SEQ_BACKLIGHT_ON
 			Delay: 20000 us
-			GPIO index 0, number 0, set 0 (0x00)
+			GPIO index 1, number 70, set 1 (0x01)

Cc: stable@vger.kernel.org
Fixes: e163cfb4 ("drm/i915/bios: Make copies of VBT data blocks")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6652Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220829135834.8585-1-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>
(cherry picked from commit a06289f3)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

The quirk added in upstream commit 90c3e219 ("drm/i915/glk: Add
Quirk for GLK NUC HDMI port issues.") is also required on the ECS Liva
Q2.

Note: Would be nicer to figure out the extra delay required for the
retimer without quirks, however don't know how to check for that.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1326Signed-off-by: NDiego Santa Cruz <Diego.SantaCruz@spinetix.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616124137.3184371-1-jani.nikula@intel.com
(cherry picked from commit 08e9505f)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Asus chromebook CX550 crashes during boot on v5.17-rc1 kernel.
The root cause is null pointer defeference of bi_next
in tgl_get_bw_info() in drivers/gpu/drm/i915/display/intel_bw.c.

BUG: kernel NULL pointer dereference, address: 000000000000002e
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G     U            5.17.0-rc1
Hardware name: Google Delbin/Delbin, BIOS Google_Delbin.13672.156.3 05/14/2021
RIP: 0010:tgl_get_bw_info+0x2de/0x510
...
[    2.554467] Call Trace:
[    2.554467]  <TASK>
[    2.554467]  intel_bw_init_hw+0x14a/0x434
[    2.554467]  ? _printk+0x59/0x73
[    2.554467]  ? _dev_err+0x77/0x91
[    2.554467]  i915_driver_hw_probe+0x329/0x33e
[    2.554467]  i915_driver_probe+0x4c8/0x638
[    2.554467]  i915_pci_probe+0xf8/0x14e
[    2.554467]  ? _raw_spin_unlock_irqrestore+0x12/0x2c
[    2.554467]  pci_device_probe+0xaa/0x142
[    2.554467]  really_probe+0x13f/0x2f4
[    2.554467]  __driver_probe_device+0x9e/0xd3
[    2.554467]  driver_probe_device+0x24/0x7c
[    2.554467]  __driver_attach+0xba/0xcf
[    2.554467]  ? driver_attach+0x1f/0x1f
[    2.554467]  bus_for_each_dev+0x8c/0xc0
[    2.554467]  bus_add_driver+0x11b/0x1f7
[    2.554467]  driver_register+0x60/0xea
[    2.554467]  ? mipi_dsi_bus_init+0x16/0x16
[    2.554467]  i915_init+0x2c/0xb9
[    2.554467]  ? mipi_dsi_bus_init+0x16/0x16
[    2.554467]  do_one_initcall+0x12e/0x2b3
[    2.554467]  do_initcall_level+0xd6/0xf3
[    2.554467]  do_initcalls+0x4e/0x79
[    2.554467]  kernel_init_freeable+0xed/0x14d
[    2.554467]  ? rest_init+0xc1/0xc1
[    2.554467]  kernel_init+0x1a/0x120
[    2.554467]  ret_from_fork+0x1f/0x30
[    2.554467]  </TASK>
...
Kernel panic - not syncing: Fatal exception

Fixes: c64a9a7c ("drm/i915: Update memory bandwidth formulae")
Signed-off-by: NŁukasz Bartosik <lb@semihalf.com>
Reviewed-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201153354.11971-1-lukasz.bartosik@semihalf.com
(cherry picked from commit c247cd03)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Pps power hook seems to be problematic for backlight controlled via
aux channel. Disable it for such cases.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3657
Cc: stable@vger.kernel.org
Signed-off-by: NJouni Högander <jouni.hogander@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822140836.534432-1-jouni.hogander@intel.com
(cherry picked from commit 869e3bb7)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Commit 20f85ef8 ("drm/i915/backlight: use unique backlight device
names") added support for multiple backlight devices on dual panel
systems, but did so with error handling on -EEXIST from
backlight_device_register(). Unfortunately, that triggered a warning in
dmesg all the way down from sysfs_add_file_mode_ns() and
sysfs_warn_dup().

Instead of optimistically always attempting to register with the default
name ("intel_backlight", which we have to retain for backward
compatibility), check if a backlight device with the name exists first,
and, if so, use the card and connector based name.

v2: reworked on top of the patch commit 20f85ef8
("drm/i915/backlight: use unique backlight device names")
v3: fixed the ref count leak(Jani N)

Fixes: 20f85ef8 ("drm/i915/backlight: use unique backlight device names")
Signed-off-by: NArun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808035750.3111046-1-arun.r.murthy@intel.com
(cherry picked from commit 4234ea30)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

The VBT dual-link DSI backlight and CABC still use ports A and C, both
in Bspec and code, while display 11+ DSI only supports ports A and
B. Assume port C actually means port B for display 11+ when parsing VBT.

Bspec: 20154
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6476
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8c462718bcc7b36a83e09d0a5eef058b6bc8b1a2.1660664162.git.jani.nikula@intel.com
(cherry picked from commit ab55165d)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Avoid using ports that aren't initialized in case the VBT backlight or
CABC ports have invalid values. This fixes a NULL pointer dereference of
intel_dsi->dsi_hosts[port] in such cases.

Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0f4f087866257d280eb97d6bcfcefd109cc5fa2.1660664162.git.jani.nikula@intel.com
(cherry picked from commit f4a6c7a4)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Pps power hook seems to be problematic for backlight controlled via
aux channel. Disable it for such cases.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3657
Cc: stable@vger.kernel.org
Signed-off-by: NJouni Högander <jouni.hogander@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822140836.534432-1-jouni.hogander@intel.com
(cherry picked from commit 869e3bb7)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Commit 20f85ef8 ("drm/i915/backlight: use unique backlight device
names") added support for multiple backlight devices on dual panel
systems, but did so with error handling on -EEXIST from
backlight_device_register(). Unfortunately, that triggered a warning in
dmesg all the way down from sysfs_add_file_mode_ns() and
sysfs_warn_dup().

Instead of optimistically always attempting to register with the default
name ("intel_backlight", which we have to retain for backward
compatibility), check if a backlight device with the name exists first,
and, if so, use the card and connector based name.

v2: reworked on top of the patch commit 20f85ef8
("drm/i915/backlight: use unique backlight device names")
v3: fixed the ref count leak(Jani N)

Fixes: 20f85ef8 ("drm/i915/backlight: use unique backlight device names")
Signed-off-by: NArun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808035750.3111046-1-arun.r.murthy@intel.com
(cherry picked from commit 4234ea30)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

The VBT dual-link DSI backlight and CABC still use ports A and C, both
in Bspec and code, while display 11+ DSI only supports ports A and
B. Assume port C actually means port B for display 11+ when parsing VBT.

Bspec: 20154
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6476
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8c462718bcc7b36a83e09d0a5eef058b6bc8b1a2.1660664162.git.jani.nikula@intel.com
(cherry picked from commit ab55165d)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Avoid using ports that aren't initialized in case the VBT backlight or
CABC ports have invalid values. This fixes a NULL pointer dereference of
intel_dsi->dsi_hosts[port] in such cases.

Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0f4f087866257d280eb97d6bcfcefd109cc5fa2.1660664162.git.jani.nikula@intel.com
(cherry picked from commit f4a6c7a4)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

bitmap_weight() doesn't return negative values, so change it's type
to unsigned long. It may help compiler to generate better code and
catch bugs.
Signed-off-by: NYury Norov <yury.norov@gmail.com>

intel-iommu.h is not needed in drm/i915 anymore. Remove its include.
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: NSteve Wahl <steve.wahl@hpe.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJason Gunthorpe <jgg@nvidia.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20220514014322.2927339-5-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.

Fixes: 091a4f91 ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: NHangyu Hua <hbh25y@gmail.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.comSigned-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit cea9ed61)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.

Fixes: 091a4f91 ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: NHangyu Hua <hbh25y@gmail.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.comSigned-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit cea9ed61)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

JSP is based on ICP and we don't really need to differentiate
between the two. So let's just delcare JSP to be ICP.

The only slight change here is for Wa_14011294188 which we
used to apply for JSP but now we'll only apply to MCC. This
should be fine since the issue being dealt with was introduced
in TGP and inherited into MCC. JSP being derived from ICP
should not need this workaround.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630150600.24611-4-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

MCC is derived from TGP, and we have no real need to
differentiate between the two. Thus remove PCH_MCC and
just declare it to be PCH_TGP compatible.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630150600.24611-3-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

drm_crtc.h has no need for linux/fb.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching linux/fb.h.

Quite a few placs do currently depend on linux/fb.h or other
headers pulled in by it without actually including any of it
directly. All of those need to be fixed up.

v2: Split the vmwgfx change out
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-3-ville.syrjala@linux.intel.com

spelling changes
resoluition -> resolution
dont        -> don't
commmit     -> commit
Invalidade  -> Invalidate
Signed-off-by: NTom Rix <trix@redhat.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701203236.1871668-1-trix@redhat.com

The ddc pin and aux channel sanitization may disable DVI/HDMI and DP,
respectively, of ports parsed earlier, in "last one wins" fashion. With
parsing and printing interleaved, we'll end up logging support first and
disabling later anyway.

Now that we've split ddi port info parsing and printing, take it further
by doing the printing in a separate loop, fixing the logging.

Note that this also changes the logging order from VBT child device
order to port number order.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621123732.1118437-1-jani.nikula@intel.com

If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.

Fixes: 091a4f91 ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: NHangyu Hua <hbh25y@gmail.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.comSigned-off-by: NJosé Roberto de Souza <jose.souza@intel.com>

This function is supposed to return zero or negative error codes but it
accidentally returns true on failure.

Fixes: 92a02074 ("drm/i915: Split shared dpll .get_dplls() into compute and get phases")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YrVcHArNMTGCSy+9@kiliReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

The LUTs are a display feature so move the details into
the display portion of the device info.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-10-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

DBUF is a display thing, so move it into the display
portion of the device info.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623130900.26078-2-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Eliminate the PIPECONF RMWs from .comit_commit() so
that we can finally declare the whole vblank evade part
(and the noarm() part) of the pipe commit free of register
reads. Or at least I hope that's the last read...

Only the i9xx/ilk codepaths need this for now, but let's
add the same thing for hsw+ just in case we want to start
calling that during fastsets at some point (eg. to change
dithering settings/etc.).

Should open up the way to start experimenting with
different DSB usage approaches for pipe commits.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413192607.27533-1-ville.syrjala@linux.intel.comReviewed-by: NUma Shankar <uma.shankar@intel.com>

Add fallback smem allocation for dpt if stolen memory
allocation failed.
Signed-off-by: NJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610121205.29645-1-juhapekka.heikkila@gmail.com

drm_crtc.h has no need for drm_blend.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_blend.h.

Quite a few placs do currently depend on drm_blend.h without
actually including it directly. All of those need to be fixed
up.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.comAcked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NJani Nikula <jani.nikula@intel.com>

drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.comAcked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NJani Nikula <jani.nikula@intel.com>

drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.

Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.comAcked-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NJani Nikula <jani.nikula@intel.com>

Each LFP may have different panel type which is stored in LFP data
data block. Based on the child device index respective panel-type/
panel-type2 field will be used.

v1: Initial rfc verion.
v2: Based on review comments from Jani,
- Used panel-type instead addition panel-index variable.
- DEVICE_HANDLE_* name changed and placed before DEVICE_TYPE_*
macro.
v3:
- passing intel_bios_encoder_data as argument of
intel_bios_init_panel(). Passing NULL to indicate encoder is not
initialized yet for dsi as current focus is to enable dual EDP. [Jani]
v4:
- encoder->devdata used which is initialized before from vbt
structure. [Jani]
Signed-off-by: NAnimesh Manna <animesh.manna@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620065138.5126-1-animesh.manna@intel.com

This reverts commit 73867c87 ("drm/i915/display: Remove check for
low voltage sku for max dp source rate"), which, on an i7-11850H iGPU
with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1
embedded panel, causes wild flickering glitching technicolor
pyrotechnics on resumption from suspend. The display shows strobing
colors in an utter disaster explosion of pantone, as though bombs were
dropped on the leprechauns at the base of the rainbow.

Rebooting the machine fixes the issue, presumably because the display is
initialized by firmware rather than by i915. Otherwise, the GPU appears
to work fine.

Bisection traced it back to this commit, which makes sense given the
issues.

Note: This re-opens, and puts back to the drawing board,
https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed
by the regressing commit.

Fixes: 73867c87 ("drm/i915/display: Remove check for low voltage sku for max dp source rate")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com
(cherry picked from commit d5929835)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Pass struct drm_i915_private * instead of struct drm_device *, and
rename dev_priv to i915.

v2: Rebase
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617094817.3466584-2-jani.nikula@intel.com

Split out the modeset hardware state readout and sanitize, or state
setup, to a separate file.

Do some drive-by checkpatch fixes while at it.

v2: Rebase
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617094817.3466584-1-jani.nikula@intel.com

This reverts commit 73867c87 ("drm/i915/display: Remove check for
low voltage sku for max dp source rate"), which, on an i7-11850H iGPU
with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1
embedded panel, causes wild flickering glitching technicolor
pyrotechnics on resumption from suspend. The display shows strobing
colors in an utter disaster explosion of pantone, as though bombs were
dropped on the leprechauns at the base of the rainbow.

Rebooting the machine fixes the issue, presumably because the display is
initialized by firmware rather than by i915. Otherwise, the GPU appears
to work fine.

Bisection traced it back to this commit, which makes sense given the
issues.

Note: This re-opens, and puts back to the drawing board,
https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed
by the regressing commit.

Fixes: 73867c87 ("drm/i915/display: Remove check for low voltage sku for max dp source rate")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com

adl-s needs the combo PLL DCO fraction w/a as well.
Gets us slightly more accurate clock out of the PLL.

Cc: stable@vger.kernel.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613201439.23341-1-ville.syrjala@linux.intel.comReviewed-by: NMatt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d36bdd77)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Prefer struct drm_i915_private *i915 over struct drm_device or dev_priv.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1bb84c4fffde5025ddc411148d529381a587e1e1.1655372759.git.jani.nikula@intel.com

Rename dev_priv to i915 in crtc state dumping code.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3c1dafd45757d2de2e3f8404674168f2b1241170.1655372759.git.jani.nikula@intel.com

Add the brackets [] around crtc state dump context string in
intel_crtc_state_dump() so the callers don't have to.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c7d671279fb7d99eaf882bcb88c5c1d653755fb1.1655372759.git.jani.nikula@intel.com

Declutter intel_display.c by splitting out crtc state dumping to a
separate file.

v2: intel_pipe_config_dump -> intel_crtc_state_dump
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f72a5626473692910263671af91e02251ed87eea.1655372759.git.jani.nikula@intel.com