- 28 7月, 2010 13 次提交
-
-
由 Andrew Vasquez 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Giridhar Malavali 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Giridhar Malavali 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
If BIOS is enabled then drivers init firmware fails since BIOS has done the init once. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Chad Dupuis 提交于
The default method that qla2xxx uses is the GID_PT nameserver command to get a list of Nx_Ports. This patch adds a GFF_ID call for each port returned by GID_PT to get the FC4 type. If the FC4 type is not FCP SCSI then the qla2xxx driver will not record that port in it's port database. For switches that do not support the GFF_ID command, the behavior will be for qla2xxx to store that port anyways. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Madhuranath Iyengar 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Giridhar Malavali 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
[SCSI] qla2xxx: For ISP 23xx, select user specified login timeout value if greater than minuimum value(4 secs). Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Santosh Vernekar 提交于
Outstanding mailbox commands, have no way to recover on f/w hung, and we timeout on waiting for mbx response. This in turn affects the recovery process as follows: - We might already be in dpc while waiting for mbx to complete, so recovery for that pci function will never get invoked. Reset Timeout (10 sec) is far less than mbx timeout (30 sec). - Other mbx cmds will get stuck due to serial mbx access. Solution is to identify fw-hung scenario and handle outstanding mbx commands to have an early-exit instead of waiting for response. Other mbx commands waiting for access will also do an early-exit if fw-hung is still applicable. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Giridhar Malavali 提交于
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
* hold the hardware_lock throughout the duration of ctx-sp timeout handling -- could result in use-after-free oops. * retry a timed-out login-request. * done() routines are called with the hardware-lock held, issue qla2x00_mark_device_lost() with proper 'defer' flag. * FCP2 capabilities are only relevant to target devices. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
This helps to correlate submission/completion messages during triaging. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Giridhar Malavali 提交于
The CRB drive active register is cleared when driver is unloaded or when driver enters failed state. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 17 5月, 2010 6 次提交
-
-
由 Giridhar Malavali 提交于
1) Allow transition to NEED RESET state only from READY state for ISP82xx. 2) Avoid infinite ISP aborts when chip reset fails. 3) Code cleanup to remove some of the unused debug code. Signed-off-by: NLalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: NSantosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Mike Waychison 提交于
The qla2xxx driver uses a port_id_t to mark the start of its enumerations. gcc is complaining that wrap.b24 may be used uninitialized, but this doesn't look to be possible. Silence it. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Madhuranath Iyengar 提交于
Currently we can only issue the task management (TM) commands via the mailbox mechanism. This is a limitation, since only one mailbox command can be issued at a time. The purpose of this effort is to provide support for issuing and processing the respose to TM and Marker IOCBs asynchronously. Towards achieving this, the consolidated srb architecture that is currently used for BSG and IOCB/Logio commands has been enhanced and used. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Madhuranath Iyengar 提交于
Currently, BSG and IOCB/Logio commands have a different framework (srb structs). The purpose of this effort is to consolidate them into a generalized framework for these as well as other asynchronous operations in the future. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
Prepare CTX infrastructure for additional asynchronous executions, add generic done() operator, pull CMD definitions. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 02 5月, 2010 1 次提交
-
-
由 Giridhar Malavali 提交于
Enhanced the driver to support new FCoE host bus adapter. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 11 4月, 2010 2 次提交
-
-
由 Andrew Vasquez 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Sarang Radke 提交于
Allows priority setting for FCP_CMNDs. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 20 2月, 2010 2 次提交
-
-
由 Andrew Vasquez 提交于
Can be used to balance NIC/FCoE traffic distribution. Cc: stable@kernel.org Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
Original code could inadvertently skip the post processing of port information returned from the SNS scan, if any link-flopping asynchronous-events were received (noticed in FCAL topologies). Cc: stable@kernel.org Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 19 1月, 2010 1 次提交
-
-
由 Giridhar Malavali 提交于
[jejb: fixed printk casting issues] Signed-off-by: NSarang Radke <sarang.radke@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 18 1月, 2010 1 次提交
-
-
由 Andrew Vasquez 提交于
The driver did not account for non-tape devices needing to employ proper FCP2 recovery. Driver now checks the FCP2-capable flag only, rather than using a midlayer-determined flag (TYPE_TAPE). Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 31 12月, 2009 2 次提交
-
-
由 Andrew Vasquez 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Michael Hernandez 提交于
When the hba port gets logged out of the fabric, or other such transitional state when the physical link is still present, the driver doesn't receive a loop up asyn event (where the link data rate currently gets set). Hence send a explicit mailbox command to get the link rate in such conditions. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 10 12月, 2009 1 次提交
-
-
由 Anirban Chakraborty 提交于
Fix to accommodate a hardware bug in multiqueue mode that does not work properly when acknowledgement of MSIX Interrupts is disabled. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 05 12月, 2009 3 次提交
-
-
由 Andrew Vasquez 提交于
Original code would not register FC4 nor FDMI information after a logical tear-down of an VFC link. Code now triggers registration date during processing of a 'Report ID Acquisition IOCB', which is submitted after a FLOGI or FDISC completes. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Lalit Chandivade 提交于
In some case, the MPI and PHY versions when retrieved after the Execute-FW mailbox-command are incorrect (255.255.255.255). Instead, query the information after the check for firmware ready is done in the abort ISP path. Signed-off-by: NLalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 12 9月, 2009 4 次提交
-
-
由 Andrew Vasquez 提交于
Original code would inadvertently skip the deferred fc_remote_port_delete() call for rports hanging off any vport. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
* Consolidate vport-count processing. * Correct vp_idx restrictions during RSCN processing. * Push topology verification check to qla2x00_do_dpc_all_vps(). * Don't skip vport full-login-lip/lip-reset mailbox handling. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Andrew Vasquez 提交于
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Santosh Vernekar 提交于
In fabric-login based on iop BIT_8 firmware notifies presence of a FCP2 device and not necessarily a TAPE device. So instead of setting FCF_TAPE_PRESENT flag there we set it using scsi_device->type after mid-layer scan recognises "type" of the device. It also adds a new flag FCF_FCP2_DEVICE for any future use. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 05 9月, 2009 1 次提交
-
-
由 Andrew Vasquez 提交于
ISPs which support this feature include 23xx and above. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 23 8月, 2009 1 次提交
-
-
由 Anirban Chakraborty 提交于
When the multiqueue mode fails to work, the driver falls back on single queue mode. This ensures that the firmware is reinitialized with single queue options and all the resources are readjusted accordingly. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 21 6月, 2009 1 次提交
-
-
由 Harish Zunjarrao 提交于
* To set iiDMA speeds for ISP81XX, bits 5-0 are used whereas for other older ISPs bits 2-0 are used. * Pass proper VP index Signed-off-by: NHarish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-