[ Upstream commit 2aa2a5ea ]

If system shutdown has not been completed cleanly, it is possible the
DMA stream shutdown has not been done, or was not clean.

If this is the case, Intel TGL/ADL HDA platforms may fail to shutdown
cleanly due to pending HDA DMA transactions. To avoid this, detect this
scenario in the shutdown callback, and perform an additional controller
reset. This has been tested to unblock S5 entry if this condition is
hit.
Co-developed-by: NArchana Patni <archana.patni@intel.com>
Signed-off-by: NArchana Patni <archana.patni@intel.com>
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NPéter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221209114529.3909192-2-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 831ed60c ]

To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well.  Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set.  For other command sets, the Commands Supported and
Effects log is required to be present already.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NKanchan Joshi <joshi.k@samsung.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 61f37154 ]

Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NKanchan Joshi <joshi.k@samsung.com>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 93ef8305 ]

When it fails to allocate fragment, it does not free and return error.
And check the pointer inappropriately.

Fixed merge conflicts with
commit 61888776 ("kunit: update NULL vs IS_ERR() tests")
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: NYoungJun.park <her0gyugyu@gmail.com>
Reviewed-by: NDavid Gow <davidgow@google.com>
Signed-off-by: NShuah Khan <skhan@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 34319084 ]

We only check the register opcode value inside the restricted ring
section, move it into the main io_uring_register() function instead
and check it up front.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5aa9d943 ]

The ACPI video detection code has a module parameter
`register_backlight_delay` which is currently configured to 8 seconds.
This means that if after 8 seconds of booting no native driver has created
a backlight device then the code will attempt to make an ACPI video
backlight device.

This was intended as a safety mechanism with the backlight overhaul that
occurred in kernel 6.1, but as it doesn't appear necesssary set it to be
disabled by default.
Suggested-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c573e240 ]

On desktop APUs amdgpu doesn't create a native backlight device
as no eDP panels are found.  However if the BIOS has reported
backlight control methods in the ACPI tables then an acpi_video0
backlight device will be made 8 seconds after boot.

This has manifested in a power slider on a number of desktop APUs
ranging from Ryzen 5000 through Ryzen 7000 on various motherboard
manufacturers. To avoid this, report to the acpi video detection
that the system does not have any panel connected in the native
driver.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783786Reported-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 00a73410 ]

The current logic for the ACPI backlight detection will create
a backlight device if no native or vendor drivers have created
8 seconds after the system has booted if the ACPI tables
included backlight control methods.

If the GPU drivers have loaded, they may be able to report whether
any LCD panels were found.  Allow using this information to factor
in whether to enable the fallback logic for making an acpi_video0
backlight device.
Suggested-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3659fb5a ]

The flush request initialized by blk_kick_flush has NULL bio,
and it may be dealt with nvme_end_req during io completion.
When blktrace is enabled, nvme_trace_bio_complete with multipath
activated trying to access NULL pointer bio from flush request
results in the following crash:

[ 2517.831677] BUG: kernel NULL pointer dereference, address: 000000000000001a
[ 2517.835213] #PF: supervisor read access in kernel mode
[ 2517.838724] #PF: error_code(0x0000) - not-present page
[ 2517.842222] PGD 7b2d51067 P4D 0
[ 2517.845684] Oops: 0000 [#1] SMP NOPTI
[ 2517.849125] CPU: 2 PID: 732 Comm: kworker/2:1H Kdump: loaded Tainted: G S                5.15.67-0.cl9.x86_64 #1
[ 2517.852723] Hardware name: XFUSION 2288H V6/BC13MBSBC, BIOS 1.13 07/27/2022
[ 2517.856358] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
[ 2517.859993] RIP: 0010:blk_add_trace_bio_complete+0x6/0x30
[ 2517.863628] Code: 1f 44 00 00 48 8b 46 08 31 c9 ba 04 00 10 00 48 8b 80 50 03 00 00 48 8b 78 50 e9 e5 fe ff ff 0f 1f 44 00 00 41 54 49 89 f4 55 <0f> b6 7a 1a 48 89 d5 e8 3e 1c 2b 00 48 89 ee 4c 89 e7 5d 89 c1 ba
[ 2517.871269] RSP: 0018:ff7f6a008d9dbcd0 EFLAGS: 00010286
[ 2517.875081] RAX: ff3d5b4be00b1d50 RBX: 0000000002040002 RCX: ff3d5b0a270f2000
[ 2517.878966] RDX: 0000000000000000 RSI: ff3d5b0b021fb9f8 RDI: 0000000000000000
[ 2517.882849] RBP: ff3d5b0b96a6fa00 R08: 0000000000000001 R09: 0000000000000000
[ 2517.886718] R10: 000000000000000c R11: 000000000000000c R12: ff3d5b0b021fb9f8
[ 2517.890575] R13: 0000000002000000 R14: ff3d5b0b021fb1b0 R15: 0000000000000018
[ 2517.894434] FS:  0000000000000000(0000) GS:ff3d5b42bfc80000(0000) knlGS:0000000000000000
[ 2517.898299] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2517.902157] CR2: 000000000000001a CR3: 00000004f023e005 CR4: 0000000000771ee0
[ 2517.906053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2517.909930] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2517.913761] PKRU: 55555554
[ 2517.917558] Call Trace:
[ 2517.921294]  <TASK>
[ 2517.924982]  nvme_complete_rq+0x1c3/0x1e0 [nvme_core]
[ 2517.928715]  nvme_tcp_recv_pdu+0x4d7/0x540 [nvme_tcp]
[ 2517.932442]  nvme_tcp_recv_skb+0x4f/0x240 [nvme_tcp]
[ 2517.936137]  ? nvme_tcp_recv_pdu+0x540/0x540 [nvme_tcp]
[ 2517.939830]  tcp_read_sock+0x9c/0x260
[ 2517.943486]  nvme_tcp_try_recv+0x65/0xa0 [nvme_tcp]
[ 2517.947173]  nvme_tcp_io_work+0x64/0x90 [nvme_tcp]
[ 2517.950834]  process_one_work+0x1e8/0x390
[ 2517.954473]  worker_thread+0x53/0x3c0
[ 2517.958069]  ? process_one_work+0x390/0x390
[ 2517.961655]  kthread+0x10c/0x130
[ 2517.965211]  ? set_kthread_struct+0x40/0x40
[ 2517.968760]  ret_from_fork+0x1f/0x30
[ 2517.972285]  </TASK>

To avoid this situation, add a NULL check for req->bio before
calling trace_block_bio_complete.
Signed-off-by: NYanjun Zhang <zhangyanjun@cestc.cn>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 23fffb2f ]

If we have a signal pending during cancelations, it'll cause the
task_work run to return an error. Since we didn't run task_work, the
current task is left in TASK_INTERRUPTIBLE state when we need to
re-grab the ctx mutex, and the kernel will rightfully complain about
that.

Move the lock grabbing for the error cases outside the loop to avoid
that issue.

Reported-by: syzbot+7df055631cd1be4586fd@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/0000000000003a14a905f05050b0@google.com/Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1a799c4c ]

If kfd_process_device_init_vm returns failure after vm is converted to
compute vm and vm->pasid set to compute pasid, KFD will not take
pdd->drm_file reference. As a result, drm close file handler maybe
called to release the compute pasid before KFD process destroy worker to
release the same pasid and set vm->pasid to zero, this generates below
WARNING backtrace and NULL pointer access.

Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step
of kfd_process_device_init_vm, to ensure vm pasid is the original pasid
if acquiring vm failed or is the compute pasid with pdd->drm_file
reference taken to avoid double release same pasid.

 amdgpu: Failed to create process VM object
 ida_free called for id=32770 which is not allocated.
 WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140
 RIP: 0010:ida_free+0x96/0x140
 Call Trace:
  amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
  amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
  drm_file_free.part.13+0x216/0x270 [drm]
  drm_close_helper.isra.14+0x60/0x70 [drm]
  drm_release+0x6e/0xf0 [drm]
  __fput+0xcc/0x280
  ____fput+0xe/0x20
  task_work_run+0x96/0xc0
  do_exit+0x3d0/0xc10

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 RIP: 0010:ida_free+0x76/0x140
 Call Trace:
  amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
  amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
  drm_file_free.part.13+0x216/0x270 [drm]
  drm_close_helper.isra.14+0x60/0x70 [drm]
  drm_release+0x6e/0xf0 [drm]
  __fput+0xcc/0x280
  ____fput+0xe/0x20
  task_work_run+0x96/0xc0
  do_exit+0x3d0/0xc10
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 29d48b87 ]

Should only destroy the ib_mem and let process cleanup worker to free
the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid
NULL pointer access in process destroy worker.

 BUG: kernel NULL pointer dereference, address: 0000000000000010
 Call Trace:
  amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu]
  kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu]
  kfd_process_destroy_pdds+0x71/0x190 [amdgpu]
  kfd_process_wq_release+0x2a2/0x3b0 [amdgpu]
  process_one_work+0x2a1/0x600
  worker_thread+0x39/0x3d0
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7554886d ]

Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the
requested memory exists, else we get a kernel oops when dereferencing "man".

v2: Make the patch standalone, i.e. not dependent on local patches.
v3: Preserve old behaviour and just check that the manager pointer is not
    NULL.
v4: Complain if GTT domain requested and it is uninitialized--most likely a
    bug.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7bd220f2 ]

Coverity spotted that panic_info is not initialized to zero in
mtk_adsp_dump. Using uninitialized value panic_info.linenum when
calling snd_sof_get_status. Fix this coverity by initializing
panic_info struct as zero.
Signed-off-by: NYC Hung <yc.hung@mediatek.com>
Reviewed-by: NCurtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20221213115617.25086-1-yc.hung@mediatek.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a1dec9d7 ]

The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:

1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
   the default 2000uA to reliable differentiate between headphones vs
   headsets

Add a quirk with these settings for this tablet.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1a4f69ef ]

KCSAN reported a race between writing req->status in p9_client_cb and
accessing it in p9_client_rpc's wait_event.

Accesses to req itself is protected by the data barrier (writing req
fields, write barrier, writing status // reading status, read barrier,
reading other req fields), but status accesses themselves apparently
also must be annotated properly with WRITE_ONCE/READ_ONCE when we
access it without locks.

Follows:
 - error paths writing status in various threads all can notify
p9_client_rpc, so these all also need WRITE_ONCE
 - there's a similar read loop in trans_virtio for zc case that also
needs READ_ONCE
 - other reads in trans_fd should be protected by the trans_fd lock and
lists state machine, as corresponding writers all are within trans_fd
and should be under the same lock. If KCSAN complains on them we likely
will have something else to fix as well, so it's better to leave them
unmarked and look again if required.

Link: https://lkml.kernel.org/r/20221205124756.426350-1-asmadeus@codewreck.orgReported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: NMarco Elver <elver@google.com>
Acked-by: NMarco Elver <elver@google.com>
Reviewed-by: NChristian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: NDominique Martinet <asmadeus@codewreck.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 44fda61d ]

The unregister machine drivers call is not safe to do when
kexec is used. Kexec-lite gets blocked with following backtrace:

[   84.943749] Freezing user space processes ... (elapsed 0.111 seconds) done.
[  246.784446] INFO: task kexec-lite:5123 blocked for more than 122 seconds.
[  246.819035] Call Trace:
[  246.821782]  <TASK>
[  246.824186]  __schedule+0x5f9/0x1263
[  246.828231]  schedule+0x87/0xc5
[  246.831779]  snd_card_disconnect_sync+0xb5/0x127
...
[  246.889249]  snd_sof_device_shutdown+0xb4/0x150
[  246.899317]  pci_device_shutdown+0x37/0x61
[  246.903990]  device_shutdown+0x14c/0x1d6
[  246.908391]  kernel_kexec+0x45/0xb9

This reverts commit 83bfc7e7.
Reported-by: NRicardo Ribalda <ribalda@chromium.org>
Cc: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NPéter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221209114529.3909192-3-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cb7a95af ]

Commit 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.

The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is.  So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.

While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).

Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com
Fixes: 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check")
Fixes: 8d824e69 ("hfs: fix OOB Read in __hfs_brec_find")
Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e498a044 ]

The newly added gpio consumer calls cause a build failure in configurations
that fail to include the right header implicitly:

drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp':
drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration]
  207 |         reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
      |                      ^~~~~~~~~~~~~~~~~~~~~~~
      |                      devm_clk_get_optional

Fixes: ca05b382 ("usb: dwc3: xilinx: Add gpio-reset support")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230103121755.956027-1-arnd@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 83c7423d ]

When extending the last extent in the file within the last block, we
wrongly computed the length of the last extent. This is mostly a
cosmetical problem since the extent does not contain any data and the
length will be fixed up by following operations but still.

Fixes: 1f3868f0 ("udf: Fix extending file within last block")
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fe69230f ]

When linktype is unknown or kzalloc failed in cfctrl_linkup_request(),
pkt is not released. Add release process to error path.

Fixes: b482cd20 ("net-caif: add CAIF core protocol stack")
Fixes: 8d545c8f ("caif: Disconnect without waiting for response")
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230104065146.1153009-1-shaozhengchao@huawei.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2c02d41d ]

When an ULP-enabled socket enters the LISTEN status, the listener ULP data
pointer is copied inside the child/accepted sockets by sk_clone_lock().

The relevant ULP can take care of de-duplicating the context pointer via
the clone() operation, but only MPTCP and SMC implement such op.

Other ULPs may end-up with a double-free at socket disposal time.

We can't simply clear the ULP data at clone time, as TLS replaces the
socket ops with custom ones assuming a valid TLS ULP context is
available.

Instead completely prevent clone-less ULP sockets from entering the
LISTEN status.

Fixes: 734942cc ("tcp: ULP infrastructure")
Reported-by: Nslipper <slipper.alive@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5401c3e0 ]

By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop
that can run 500K times, so calls to qed_mcp_nvm_rd_cmd()
may block the current thread for over 5s.
We observed thread scheduling delays over 700ms in production,
with stacktraces pointing to this code as the culprit.

qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted.
It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd().
Add a "can sleep" parameter to qed_find_nvram_image() and
qed_nvram_read() so they can sleep during qed_mcp_trace_dump().
qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(),
called only by qed_mcp_trace_dump(), allow these functions to sleep.
I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep,
so keep b_can_sleep set to false when it calls these functions.

An example stacktrace from a custom warning we added to the kernel
showing a thread that has not scheduled despite long needing resched:
[ 2745.362925,17] ------------[ cut here ]------------
[ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0()
[ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99
[ 2745.362956,17] Modules linked in: ...
[ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P           O    4.4.182+ #202104120910+6d1da174272d.61x
[ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020
[ 2745.363346,17]  0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20
[ 2745.363358,17]  ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000
[ 2745.363369,17]  0000000000000063 0000000000000174 0000000000000074 0000000000000000
[ 2745.363379,17] Call Trace:
[ 2745.363382,17]  <IRQ>  [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf
[ 2745.363393,17]  [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0
[ 2745.363398,17]  [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50
[ 2745.363404,17]  [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0
[ 2745.363408,17]  [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0
[ 2745.363413,17]  [<ffffffff817c7ac9>] common_interrupt+0x89/0x89
[ 2745.363416,17]  <EOI>  [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50
[ 2745.363425,17]  [<ffffffff8132aa04>] __udelay+0x34/0x40
[ 2745.363457,17]  [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed]
[ 2745.363473,17]  [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed]
[ 2745.363490,17]  [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed]
[ 2745.363504,17]  [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed]
[ 2745.363520,17]  [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed]
[ 2745.363536,17]  [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed]
[ 2745.363551,17]  [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed]
[ 2745.363560,17]  [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede]
[ 2745.363566,17]  [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190
[ 2745.363570,17]  [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140
[ 2745.363575,17]  [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260
[ 2745.363580,17]  [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0
[ 2745.363585,17]  [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370
[ 2745.363589,17]  [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90
[ 2745.363594,17]  [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710
[ 2745.363599,17]  [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60
[ 2745.363603,17]  [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280
[ 2745.363608,17]  [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220
[ 2745.363612,17]  [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0
[ 2745.363616,17]  [<ffffffff811e3771>] SyS_ioctl+0x41/0x70
[ 2745.363619,17]  [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79
[ 2745.363622,17] ---[ end trace f6954aa440266421 ]---

Fixes: c965db44 ("qed: Add support for debug data collection")
Signed-off-by: NCaleb Sander <csander@purestorage.com>
Acked-by: NAlok Prasad <palok@marvell.com>
Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fa8e442e ]

Most of control command handlers may sleep, so return -EAGAIN in case
of IO_URING_F_NONBLOCK to defer the handling into io wq context.

Fixes: 71f28f31 ("ublk_drv: add io_uring based userspace block driver")
Reported-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230104133235.836536-1-ming.lei@redhat.comSigned-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4a61648a ]

If intel_gvt_dma_map_guest_page failed, it will call
ppgtt_invalidate_spt, which will finally free the spt.
But the caller function ppgtt_populate_spt_by_guest_entry
does not notice that, it will free spt again in its error
path.

Fix this by canceling the mapping of DMA address and freeing sub_spt.
Besides, leave the handle of spt destroy to caller function instead
of callee function when error occurs.

Fixes: b901b252 ("drm/i915/gvt: Add 2M huge gtt support")
Signed-off-by: NZheng Wang <zyytlz.wz@163.com>
Reviewed-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221229165641.1192455-1-zyytlz.wz@163.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3792fc50 ]

Call intel_vgpu_unpin_mm() on this error path.

Fixes: 41874148 ("drm/i915/gvt: Adding ppgtt to GVT GEM context after shadow pdps settled.")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/Y3OQ5tgZIVxyQ/WV@kiliReviewed-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 54b353a2 ]

The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.

Let's check the cgroup name before adding a new entry to the cgroups
list.

Before:

  $ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1

   Performance counter stats for 'system wide':

       <not counted> msec cpu-clock                        /
       <not counted>      context-switches                 /
       <not counted>      cpu-migrations                   /
       <not counted>      page-faults                      /
       <not counted>      cycles                           /
       <not counted>      instructions                     /
       <not counted>      branches                         /
       <not counted>      branch-misses                    /
            8,016.04 msec cpu-clock                        /                #    7.998 CPUs utilized
               6,152      context-switches                 /                #  767.461 /sec
                 250      cpu-migrations                   /                #   31.187 /sec
                 442      page-faults                      /                #   55.139 /sec
         613,111,487      cycles                           /                #    0.076 GHz
         280,599,604      instructions                     /                #    0.46  insn per cycle
          57,692,724      branches                         /                #    7.197 M/sec
           3,385,168      branch-misses                    /                #    5.87% of all branches

         1.002220125 seconds time elapsed

After it becomes similar to the non-BPF mode:

  $ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/  sleep 1

   Performance counter stats for 'system wide':

            8,013.38 msec cpu-clock                        /                #    7.998 CPUs utilized
               6,859      context-switches                 /                #  855.944 /sec
                 334      cpu-migrations                   /                #   41.680 /sec
                 345      page-faults                      /                #   43.053 /sec
         782,326,119      cycles                           /                #    0.098 GHz
         471,645,724      instructions                     /                #    0.60  insn per cycle
          94,963,430      branches                         /                #   11.851 M/sec
           3,685,511      branch-misses                    /                #    3.88% of all branches

         1.001864539 seconds time elapsed

Committer notes:

As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:

  # perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
  Error: unknown option `bpf-counters'

   Usage: perf stat [<options>] [<command>]

      -a, --all-cpus        system-wide collection from all CPUs
  <SNIP>
  #

Fixes: bb1c15b6 ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2d656b0f ]

When --for-each-cgroup option is used, it fails when any of events is
not supported and exits immediately.  This is not how 'perf stat'
handles unsupported events.

Let's ignore the failure and proceed with others so that the output is
similar to when BPF counters are not used:

Before:

  $ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
  Failed to open first cgroup events
  $

After it shows output similat to when --bpf-counters isn't specified:

  $ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1

   Performance counter stats for 'system wide':

     <not supported>      L1-icache-loads                  system.slice
          29,892,418      L1-dcache-loads                  system.slice
     <not supported>      L1-icache-loads                  user.slice
          52,497,220      L1-dcache-loads                  user.slice
  $

Fixes: 944138f0 ("perf stat: Enable BPF counter with --for-each-cgroup")
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-4-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d8d85ce8 ]

The test case perf lock contention dumps core on s390. Run the following
commands:

  # ./perf lock record -- ./perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

      Total time: 2.799 [sec]
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
  #
  # ./perf lock contention
  Segmentation fault (core dumped)
  #

The function call stack is lengthy, here are the top 5 functions:

  # gdb ./perf core.24048
  GNU gdb (GDB) Fedora Linux 12.1-6.fc37
  Core was generated by `./perf lock contention'.
  Program terminated with signal SIGSEGV, Segmentation fault.
  #0  0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
         3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);

 (gdb) where
  #0  0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
  #1  0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957
  #2  0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586
  #3  0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004
  #4  0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254
  #5  0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
  .....

The issue is in function machine__is_lock_function() in file
./util/machine.c lines 3355:

   /* should not fail from here */
   sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap);
   machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)

On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
access and generates the core dump.

The reason why __sched_text_end is not in the symbol list on s390 is
simple:

When the symbol list is created at perf start up with function calls

  dso__load
  +--> dso__load_vmlinux_path
       +--> dso__load_vmlinux
            +--> dso__load_sym
	         +--> dso__load_sym_internal (reads kernel symbols)
		 +--> symbols__fixup_end
		 +--> symbols__fixup_duplicate

The issue is in function symbols__fixup_duplicate(). It deletes all
symbols with have the same address. On s390:

  # nm -g  ~/linux/vmlinux| fgrep c68390
  0000000000c68390 T __cpuidle_text_start
  0000000000c68390 T __sched_text_end
  #

two symbols have identical addresses and __sched_text_end is considered
duplicate (in ascending sort order) and removed from the symbol list.
Therefore it is missing and an invalid pointer reference occurs.  The
code checks for symbol __sched_text_start and when it exists assumes
symbol __sched_text_end is also in the symbol table. However this is not
the case on s390.

Same situation exists for symbol __lock_text_start:

0000000000c68770 T __cpuidle_text_end
0000000000c68770 T __lock_text_start

This symbol is also removed from the symbol table but used in function
machine__is_lock_function().

To fix this and keep duplicate symbols in the symbol table, set
symbol_conf.allow_aliases to true. This prevents the removal of
duplicate symbols in function symbols__fixup_duplicate().

Output After:

 # ./perf lock contention
 contended total wait  max wait  avg wait    type   caller

        48   124.39 ms 123.99 ms   2.59 ms rwsem:W unlink_anon_vmas+0x24a
        47    83.68 ms  83.26 ms   1.78 ms rwsem:W free_pgtables+0x132
         5    41.22 us  10.55 us   8.24 us rwsem:W free_pgtables+0x140
         4    40.12 us  20.55 us  10.03 us rwsem:W copy_process+0x1ac8
 #

Fixes: 0d2997f7 ("perf lock: Look up callchain for the contended locks")
Signed-off-by: NThomas Richter <tmricht@linux.ibm.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221230102627.2410847-1-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c7dd1380 ]

Variables off and len typed as uint32 in rndis_query function
are controlled by incoming RNDIS response message thus their
value may be manipulated. Setting off to a unexpectetly large
value will cause the sum with len and 8 to overflow and pass
the implemented validation step. Consequently the response
pointer will be referring to a location past the expected
buffer boundaries allowing information leakage e.g. via
RNDIS_OID_802_3_PERMANENT_ADDRESS OID.

Fixes: ddda0862 ("USB: rndis_host, various cleanups")
Signed-off-by: NSzymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4af1b64f ]

Current code uses per_cpu pointer to get the lmtst_id mapped to
the core on which aura_free() is executed. Using per_cpu pointer
without preemption disable causing mismatch between lmtst_id and
core on which pointer gets freed. This patch fixes the issue by
disabling preemption around aura_free.

Fixes: ef6c8da7 ("octeontx2-pf: cn10K: Reserve LMTST lines per core")
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NGeetha sowjanya <gakula@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9c807965 ]

Otherwise we would dereference a NULL aggregator pointer when calling
__set_agg_ports_ready on the line below.

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NDaniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0226635c ]

syzbot is reporting hung task at do_user_addr_fault() [1], for there is
a silent deadlock between PG_locked bit and ni_lock lock.

Since filemap_update_page() calls filemap_read_folio() after calling
folio_trylock() which will set PG_locked bit, ntfs_truncate() must not
call truncate_setsize() which will wait for PG_locked bit to be cleared
when holding ni_lock lock.

Link: https://lore.kernel.org/all/00000000000060d41f05f139aa44@google.com/
Link: https://syzkaller.appspot.com/bug?extid=bed15dbf10294aa4f2ae [1]
Reported-by: Nsyzbot <syzbot+bed15dbf10294aa4f2ae@syzkaller.appspotmail.com>
Debugged-by: NLinus Torvalds <torvalds@linux-foundation.org>
Co-developed-by: NHillf Danton <hdanton@sina.com>
Signed-off-by: NHillf Danton <hdanton@sina.com>
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 4342306f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 92d43bd3 ]

ipu_src_rect_width() was introduced to support odd screen resolutions
such as 1366x768 by internally rounding up primary plane width to a
multiple of 8 and compensating with reduced horizontal blanking.
This also caused overlay plane width to be rounded up, which was not
intended. Fix overlay plane width by limiting the rounding up to the
primary plane.

drm_rect_width(&new_state->src) >> 16 is the same value as
drm_rect_width(dst) because there is no plane scaling support.

Fixes: 94dfec48 ("drm/imx: Add 8 pixel alignment fix")
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20221108141420.176696-1-p.zabel@pengutronix.deSigned-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108141420.176696-1-p.zabel@pengutronix.deTested-by: NIan Ray <ian.ray@ge.com>
(cherry picked from commit 4333472f)
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0a6564eb ]

In perf_data__open_dir(), opendir() opens the directory stream.  Add
missing closedir() to release it after use.

Fixes: eb617670 ("perf data: Add perf_data__open_dir_data function")
Reviewed-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221229090903.1402395-1-linmq006@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a764da46 ]

The virtio_gpu_object_shmem_init() will alloc memory and save it in
@ents, so when virtio_gpu_array_alloc() fails, this memory should be
freed, this patch fixes it.

Fixes: e7fef092 ("drm/virtio: Simplify error handling of virtio_gpu_object_create()")
Signed-off-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: NDmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: NDmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109091905.55451-1-xiujianfeng@huawei.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5e29dc36 ]

When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.

The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel.

Fixes: 5f7b51bf ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com
Signed-off-by: NJozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a31d47be ]

The hash:net,port,net set type supports /0 subnets. However, the patch
commit 5f7b51bf titled "netfilter: ipset: Limit the maximal range
of consecutive elements to add/delete" did not take into account it and
resulted in an endless loop. The bug is actually older but the patch
5f7b51bf brings it out earlier.

Handle /0 subnets properly in hash:net,port,net set types.

Fixes: 5f7b51bf ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: NМарк Коренберг <socketpair@gmail.com>
Signed-off-by: NJozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 588ab2dc ]

There is an issue with the checking of the return value of
'of_get_mac_address', which returns 0 on success and negative value on
failure. The driver interpretated the result the opposite way. Therefore
if there was a MAC address defined in the DT, then the driver was
generating a random MAC address otherwise it would use address 0.
Fix this by checking correctly the return value of 'of_get_mac_address'

Fixes: b74ef9f9 ("net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()")
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 06bf6294 ]

The memory allocated by vxlan_vnigroup_init() is not freed in the error
path, leading to memory leaks [1]. Fix by calling
vxlan_vnigroup_uninit() in the error path.

The leaks can be reproduced by annotating gro_cells_init() with
ALLOW_ERROR_INJECTION() and then running:

 # echo "100" > /sys/kernel/debug/fail_function/probability
 # echo "1" > /sys/kernel/debug/fail_function/times
 # echo "gro_cells_init" > /sys/kernel/debug/fail_function/inject
 # printf %#x -12 > /sys/kernel/debug/fail_function/gro_cells_init/retval
 # ip link add name vxlan0 type vxlan dstport 4789 external vnifilter
 RTNETLINK answers: Cannot allocate memory

[1]
unreferenced object 0xffff88810db84a00 (size 512):
  comm "ip", pid 330, jiffies 4295010045 (age 66.016s)
  hex dump (first 32 bytes):
    f8 d5 76 0e 81 88 ff ff 01 00 00 00 00 00 00 02  ..v.............
    03 00 04 00 48 00 00 00 00 00 00 01 04 00 01 00  ....H...........
  backtrace:
    [<ffffffff81a3097a>] kmalloc_trace+0x2a/0x60
    [<ffffffff82f049fc>] vxlan_vnigroup_init+0x4c/0x160
    [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280
    [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0
    [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50
    [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130
    [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0
    [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0
    [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40
    [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440
    [<ffffffff839066af>] netlink_unicast+0x53f/0x810
    [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70
    [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90
    [<ffffffff835cd6da>] ___sys_sendmsg+0x13a/0x1e0
    [<ffffffff835cd94c>] __sys_sendmsg+0x11c/0x1f0
    [<ffffffff8424da78>] do_syscall_64+0x38/0x80
unreferenced object 0xffff88810e76d5f8 (size 192):
  comm "ip", pid 330, jiffies 4295010045 (age 66.016s)
  hex dump (first 32 bytes):
    04 00 00 00 00 00 00 00 db e1 4f e7 00 00 00 00  ..........O.....
    08 d6 76 0e 81 88 ff ff 08 d6 76 0e 81 88 ff ff  ..v.......v.....
  backtrace:
    [<ffffffff81a3162e>] __kmalloc_node+0x4e/0x90
    [<ffffffff81a0e166>] kvmalloc_node+0xa6/0x1f0
    [<ffffffff8276e1a3>] bucket_table_alloc.isra.0+0x83/0x460
    [<ffffffff8276f18b>] rhashtable_init+0x43b/0x7c0
    [<ffffffff82f04a1c>] vxlan_vnigroup_init+0x6c/0x160
    [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280
    [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0
    [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50
    [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130
    [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0
    [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0
    [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40
    [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440
    [<ffffffff839066af>] netlink_unicast+0x53f/0x810
    [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70
    [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90

Fixes: f9c4bb0b ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NNikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>