The PROVE_RCU_REPEATEDLY has no "Say Y"/"Say N" advice, so this commit
adds it.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The current tracing data is not sufficient to deduce the average time
that a callback spends waiting for a grace period to end.  Add three
per-CPU counters recording the number of callbacks invoked (ci), the
number of callbacks orphaned (co), and the number of callbacks adopted
(ca).  Given the existing callback queue length (ql), the average wait
time in absence of CPU hotplug operations is ql/ci.  The units of wait
time will be in terms of the duration over which ci was measured.

In the presence of CPU hotplug operations, there is room for argument,
but ql/(ci-co+ca) won't steer you too far wrong.

Also fixes a typo called out by Lucas De Marchi <lucas.de.marchi@gmail.com>.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Add the sparse __rcu address-space identifier and make a couple of
variables static.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The current version of the __rcu_access_pointer(), __rcu_dereference_check(),
and __rcu_dereference_protected() macros evaluate their "p" argument
three times, not counting typeof()s.  This is bad news if that argument
contains a side effect.  This commit therefore evaluates this argument
only once in normal kernel builds.  However, the straightforward approach
defeats sparse's RCU-pointer checking, so when __CHECKER__ is defined,
the additional pair of evaluations of the "p" argument are performed in
order to permit sparse to detect misuse of RCU-protected pointers.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>

The CONFIG_DEBUG_LOCK_ALLOC ifdef isn't necessary at this point, because it is
checked in an outer ifdef level already and has no effect here.
Signed-off-by: NChristian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

CONFIG_RCU_CPU_STALL_VERBOSE depends on CONFIG_TREE_PREEMPT_RCU, but
rcu_bootup_announce_oddness() complains if CONFIG_RCU_CPU_STALL_VERBOSE
is not set even in the case of CONFIG_TREE_RCU.  This commit therefore
fixes rcu_bootup_announce_oddness() to avoid insisting on impossibilities.
Reported-by: NGuy Martin <gmsoft@tuxicoman.be>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit tightens up checks in rcu_preempt_check_callbacks() to avoid
unnecessary special handling at rcu_read_unlock() time.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

CPU-bound real-time processes can cause RCU CPU stall warnings, and
much other trouble as well.  Document the fact that they can cause
RCU CPU stall warnings.
Suggested-by: NDarren Hart <dvhltc@us.ibm.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/rcu

Also add rcu_dereference_protected() for code paths where locks are held.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>

With the introduction of the new unified work queue thread pools,
we lost one feature: It's no longer possible to know which worker
is causing the CPU to wake out of idle. The result is that PowerTOP
now reports a lot of "kworker/a:b" instead of more readable results.

This patch adds a pair of tracepoints to the new workqueue code,
similar in style to the timer/hrtimer tracepoints.

With this pair of tracepoints, the next PowerTOP can correctly
report which work item caused the wakeup (and how long it took):

Interrupt (43)            i915      time   3.51ms    wakeups 141
Work      ieee80211_iface_work      time   0.81ms    wakeups  29
Work              do_dbs_timer      time   0.55ms    wakeups  24
Process                   Xorg      time  21.36ms    wakeups   4
Timer    sched_rt_period_timer      time   0.01ms    wakeups   1
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/mtd-2.6:
  mtd: nand: Fix probe of Samsung NAND chips
  mtd: nand: Fix regression in BBM detection
  pxa3xx: fix ns2cycle equation

The "Configure" word tends to make user believe they have to say 'yes'
to be able to choose the number of procs/nodes.  "Enable" should be
unambiguous enough.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Like the mlock() change previously, this makes the stack guard check
code use vma->vm_prev to see what the mapping below the current stack
is, rather than have to look it up with find_vma().

Also, accept an abutting stack segment, since that happens naturally if
you split the stack with mlock or mprotect.
Tested-by: NIan Campbell <ijc@hellion.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we've split the stack vma, only the lowest one has the guard page.
Now that we have a doubly linked list of vma's, checking this is trivial.
Tested-by: NIan Campbell <ijc@hellion.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's a really simple list, and several of the users want to go backwards
in it to find the previous vma.  So rather than have to look up the
previous entry with 'find_vma_prev()' or something similar, just make it
doubly linked instead.
Tested-by: NIan Campbell <ijc@hellion.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Apparently, the check for a 6-byte ID string introduced by commit
426c457a ("mtd: nand: extend NAND flash
detection to new MLC chips") is NOT sufficient to determine whether or
not a Samsung chip uses their new MLC detection scheme or the old,
standard scheme. This adds a condition to check cell type.
Signed-off-by: NTilman Sauerbeck <tilman@code-monkey.de>
Signed-off-by: NBrian Norris <norris@broadcom.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, apic: Fix apic=debug boot crash
  x86, hotplug: Serialize CPU hotplug to avoid bringup concurrency issues
  x86-32: Fix dummy trampoline-related inline stubs
  x86-32: Separate 1:1 pagetables from swapper_pg_dir
  x86, cpu: Fix regression in AMD errata checking code

This list moved to lists.ozlabs.org quite some time ago.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All these lists moved to lists.ozlabs.org quite a while ago.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Chapter 6 is right about mutex_trylock, but chapter 10 wasn't.  This error
was introduced during semaphore-to-mutex conversion of the Unreliable
guide.  :-)

If user context which performs mutex_lock() or mutex_trylock() is
preempted by interrupt context which performs mutex_trylock() on the same
mutex instance, a deadlock occurs.  This is because these functions do not
disable local IRQs when they operate on mutex->wait_lock.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gcc-4.0.2:

  drivers/scsi/qla4xxx/ql4_os.c: In function 'qla4_8xxx_error_recovery':
  drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available
  drivers/scsi/qla4xxx/ql4_os.c:2377: sorry, unimplemented: called from here
  drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available
  drivers/scsi/qla4xxx/ql4_os.c:2393: sorry, unimplemented: called from here

Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix uml compile error:

  include/linux/dma-mapping.h:145: error: redefinition of 'dma_get_cache_alignment'
  arch/um/include/asm/dma-mapping.h:99: note: previous definition of 'dma_get_cache_alignment' was here

Introduced by commit 4565f017 ("dma-mapping: unify
dma_get_cache_alignment implementations")
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dump_tasks() needs to hold the RCU read lock around its access of the
target task's UID.  To this end it should use task_uid() as it only needs
that one thing from the creds.

The fact that dump_tasks() holds tasklist_lock is insufficient to prevent the
target process replacing its credentials on another CPU.

Then, this patch change to call rcu_read_lock() explicitly.

	===================================================
	[ INFO: suspicious rcu_dereference_check() usage. ]
	---------------------------------------------------
	mm/oom_kill.c:410 invoked rcu_dereference_check() without protection!

	other info that might help us debug this:

	rcu_scheduler_active = 1, debug_locks = 1
	4 locks held by kworker/1:2/651:
	 #0:  (events){+.+.+.}, at: [<ffffffff8106aae7>]
	process_one_work+0x137/0x4a0
	 #1:  (moom_work){+.+...}, at: [<ffffffff8106aae7>]
	process_one_work+0x137/0x4a0
	 #2:  (tasklist_lock){.+.+..}, at: [<ffffffff810fafd4>]
	out_of_memory+0x164/0x3f0
	 #3:  (&(&p->alloc_lock)->rlock){+.+...}, at: [<ffffffff810fa48e>]
	find_lock_task_mm+0x2e/0x70
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 0aad4b31 ("oom: fold __out_of_memory into out_of_memory")
introduced a tasklist_lock leak.  Then it caused following obvious
danger warnings and panic.

    ================================================
    [ BUG: lock held when returning to user space! ]
    ------------------------------------------------
    rsyslogd/1422 is leaving the kernel with locks still held!
    1 lock held by rsyslogd/1422:
     #0:  (tasklist_lock){.+.+.+}, at: [<ffffffff810faf64>] out_of_memory+0x164/0x3f0
    BUG: scheduling while atomic: rsyslogd/1422/0x00000002
    INFO: lockdep is turned off.

This patch fixes it.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b940fd70 ("oom: remove unnecessary code and cleanup") added an
unnecessary NULL pointer dereference.  remove it.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's some merge problem between sdhic core and sdhci-s3c host.  After
mutex is changed to spinlock.  It needs to use use spin lock functions and
use the correct card detection function.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some SDHCI controllers like s5pc110 don't have an HISPD bit in the HOSTCTL
register.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

s5pc110 (aka s5pv210) uses the same SDHCI IP.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Each board can override the default sdhci host capabilities.
Some board has broken features by hardwares and support 8-bit bandwidth.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When radix_tree_maxindex() is ~0UL, it can happen that scanning overflows
index and tree traversal code goes astray reading memory until it hits
unreadable memory.  Check for overflow and exit in that case.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Revert commit 7721fea3 ("hwmon:
f71882fg: add support for the Fintek F71808E").

Hans said:

: A second review after I've received a data sheet for this device from
: Fintek has turned up a few bugs.
:
: Unfortunately Giel (nor I) have time to fix this in time for the 2.6.36
: cycle.  Therefor I would like to see this patch reverted as not having any
: support for the hwmon function of this superio chip is better then having
: unreliable support.

Cc: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide a check in all the kfifo examples to validate the correct
execution of each testcase.
Signed-off-by: NAndrea Righi <arighi@develer.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We use a dynamically allocated kfifo in the dma example, so we need to
free it when unloading the module.
Signed-off-by: NAndrea Righi <arighi@develer.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The scatterlist is used uninitialized in kfifo_dma_in_prepare().  This
triggers the following bug if CONFIG_DEBUG_SG=y:

  ------------[ cut here ]------------
  kernel BUG at include/linux/scatterlist.h:65!
  invalid opcode: 0000 [#1] PREEMPT SMP
  ...
  Call Trace:
   [<ffffffff810a1eab>] setup_sgl+0x6b/0xe0
   [<ffffffffa03d7000>] ? example_init+0x0/0x265 [dma_example]
   [<ffffffff810a2021>] __kfifo_dma_in_prepare+0x21/0x30
   [<ffffffffa03d7124>] example_init+0x124/0x265 [dma_example]
   [<ffffffff810f9c55>] ? trace_module_notify+0x25/0x370
   [<ffffffff81110c6e>] ? free_pages_prepare+0x11e/0x1e0
   [<ffffffff8106f2b1>] ? get_parent_ip+0x11/0x50
   [<ffffffff810f9c55>] ? trace_module_notify+0x25/0x370
   [<ffffffff810b65fd>] ? trace_hardirqs_on+0xd/0x10
   [<ffffffff814beade>] ? mutex_unlock+0xe/0x10
   [<ffffffff810f9c71>] ? trace_module_notify+0x41/0x370
   [<ffffffff810a77d5>] ? __blocking_notifier_call_chain+0x45/0x80
   [<ffffffff81137b7a>] ? vfree+0x2a/0x30
   [<ffffffff810a6ac3>] ? up_read+0x23/0x40
   [<ffffffff810a77f5>] ? __blocking_notifier_call_chain+0x65/0x80
   [<ffffffff810001e3>] do_one_initcall+0x43/0x180
   [<ffffffff810c577a>] sys_init_module+0xba/0x200
   [<ffffffff8103819b>] system_call_fastpath+0x16/0x1b
  RIP  [<ffffffff810a1e31>] setup_sgl_buf+0x1a1/0x1b0
   RSP <ffff88006720dc98>
  ---[ end trace a72b979fd3c1d3a5 ]---

Add the proper initialization to avoid the bug.
Signed-off-by: NAndrea Righi <arighi@develer.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide a static array of expected items that kfifo should contain at the
end of the test to validate it.
Signed-off-by: NAndrea Righi <arighi@develer.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a testcase for kfifo_skip() to the byte stream fifo example.
Signed-off-by: NAndrea Righi <arighi@develer.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kfifo_skip() is currently broken, due to the missing of the internal
helper function.  Add it.
Signed-off-by: NAndrea Righi <arighi@develer.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Screen is completely corrupted since 2.6.34.  Bisection revealed that it's
caused by commit 6175ddf0 ("x86: Clean up mem*io functions.").

H.  Peter Anvin explained that memcpy_toio() does not copy data in 32bit
chunks anymore on x86.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: <stable@kernel.org>		[2.6.34.x, 2.6.35.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because list_empty() does not dereference any RCU-protected pointers, and
further does not pass such pointers to the caller (so that the caller
does not dereference them either), it is safe to use list_empty() on
RCU-protected lists.  There is no need for a list_empty_rcu().  This
commit adds a comment stating this explicitly.
Requested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>