Add new TX WQE field for Connect-X6DX trailer insertion support,
when set, the HW adds a trailer to the packet, the WQE trailer
association flags are used to set to HW the header which the
trailer belongs.
Signed-off-by: NRaed Salem <raeds@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add a bit in HCA capabilities layout to indicate if release all pages is
supported.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add TLS RX offload related IFC hardware fields and enumerations.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add needed structure layouts and defines for pci sync for fw update
event. The downstream patches will include event handlers for this event
type.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add needed structure layouts and defines for MFRL (Management Firmware
Reset Level) register. This structure will be used for the firmware
upgrade and reset flow in the downstream patches.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The imm_inval_pkey field can hold four different types of data,
depends on the usage, the data could be one of the below:
- Immediate field of the received message
- Invalidate rkey
- Pkey of the packet
- Flow table metadata

Current implementation doesn't reflect the intended usage of the
field at usage time.

Reflect the different types by replace this field with a union,
modify code where this field is used to reflect its intended
usage.
Signed-off-by: NRaed Salem <raeds@mellanox.com>
Reviewed-by: NHuy Nguyen <huyn@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The alignment value is part of the input structure, so use it and spare
extra memory allocation when is not needed.
Now, using the new ability when allocating icm for Direct-Rule
insertion.
Signed-off-by: NAriel Levkovich <lariel@mellanox.com>
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add IPsec offload related IFC structs, layouts and enumerations.
Signed-off-by: NRaed Salem <raeds@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add COPY type to modify_header action. IPsec feature is the first
feature that needs COPY steering action.
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Signed-off-by: NRaed Salem <raeds@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of transobj.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of SW steering to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of port.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of rl.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of uar.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of pd.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of pagealloc.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of mr.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of mcg.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of main.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of vxlan.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of mpfs.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of gid.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of lag.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of fw.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of fs_core to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of FPGA to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of eswitch to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of statistics to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of eq.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of ecpf.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of debugfs.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of cq.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Do mass update of vport.c to reuse newly introduced
mlx5_cmd_exec_in*() interfaces.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

When this is enabled, UDP source port for RoCEv2 packets are defined
by software instead of firmware.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Reduce the amount of kzalloc/kfree cycles by allocating
command structure in the parent function and leverage the
knowledge that set_caps() is called for HCA capabilities
only with specific HW structure as parameter to calculate
mailbox size.
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

The mlx5_core doesn't need any functionality coded in qp.c, so move
that file to drivers/infiniband/ be under mlx5_ib responsibility.
Reviewed-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Sort .o objects in makefile to make addition of new object
less cumbersome.
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

The structures defined in the cmd header are not used and can be safely
removed from the driver. This patch removes that file and deletes all
relevant includes.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Remove mlx5_ib implementation of Q counter allocation logic
together with cleaning boolean which controlled validity of the
counter. It is not needed, because counter_id == 0 means that
counter is not valid.
Reviewed-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

mlx5 core users are encouraged to use low level API (mlx5_cmd_exec)
without the need of helper functions, do this for q counters, remove
helper functions and call mlx5_cmd_exec directly from users.

This will help reduce the total amount of code and reduction of the
mlx5_core symbol table.
Reviewed-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>