- 07 6月, 2012 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This patches fixes the driver when built as dynamic module. In fact, the platform part cannot be built and the probe fails (thanks to Bob Liu that reported this bug). v2: as D. Miller suggested, it is not necessary to make the pci and the platform code mutually exclusive. Having both could also help, at built time ,to verify that all the code is validated and compiles fine. v3: removed wrong Reviewed-by from the patch Reported-by: NBob Liu <lliubbo@gmail.com> cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 12月, 2011 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This patch adds the PCI support (as EXPERIMENTAL) this has been also tested on XLINX XC2V3000 FF1152AMT0221 D1215994A VIRTEX FPGA board. To support the PCI bus the main part has been reworked and both the platform and the PCI specific parts have been moved into different files. Signed-off-by: NRayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 10月, 2011 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This patch enhances the STMMAC driver to support CHAINED mode of descriptor. STMMAC supports DMA descriptor to operate both in dual buffer(RING) and linked-list(CHAINED) mode. In RING mode (default) each descriptor points to two data buffer pointers whereas in CHAINED mode they point to only one data buffer pointer. In CHAINED mode each descriptor will have pointer to next descriptor in the list, hence creating the explicit chaining in the descriptor itself, whereas such explicit chaining is not possible in RING mode. First version of this work has been done by Rayagond. Then the patch has been reworked avoiding ifdef inside the C code. A new header file has been added to define all the functions needed for managing enhanced and normal descriptors. In fact, these have to be specialized according to the ring/chain usage. Two new C files have been also added to implement the helper routines needed to manage: jumbo frames, chain and ring setup (i.e. desc3). Signed-off-by: NRayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2011 3 次提交
-
-
由 Jeff Kirsher 提交于
MII Kconfig option is apart of the core networking drivers and by default NET_CORE is enabled so drivers selecting MII will have MII enabled as well. It was found using the randconfig option during testing, MII would be selected but NET_CORE could be disabled. This caused a dependency error. Resolved the dependency by selecting NET_CORE when MII is selected. Reported-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
New GMAC chips have an extra register to indicate the presence of the optional features/functions of the DMA core. This patch adds this support and all the HW cap are exported via debugfs. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch adds the following debugFs entry to dump the RX/TX DMA rings: /sys/kernel/debug/stmmaceth/descriptors_status This is an example: ======================= RX descriptor ring ======================= [0] DES0=0x85ee0320 DES1=0x1fff1fff BUF1=0x5fae2022 BUF2=0x0 [1] DES0=0x85ee0320 DES1=0x1fff1fff BUF1=0x5fae0022 BUF2=0x0 [2] DES0=0x81460320 DES1=0x1fff1fff BUF1=0x5f9dd022 BUF2=0x0 Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Move the STMicroelectronics driver into driver/net/ethernet/stmicro/ and make the necessary Kconfig and Makefile changes. CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 07 10月, 2010 1 次提交
-
-
由 Martin Schwidefsky 提交于
The stmmac driver does not compile on s390: drivers/net/stmmac/stmmac_main.c: In function 'stmmac_adjust_link': drivers/net/stmmac/stmmac_main.c:210: error: implicit declaration of function 'readl' drivers/net/stmmac/stmmac_main.c:263: error: implicit declaration of function 'writel' drivers/net/stmmac/stmmac_main.c: In function 'stmmac_dvr_probe': drivers/net/stmmac/stmmac_main.c:1674: error: implicit declaration of function 'ioremap' drivers/net/stmmac/stmmac_main.c:1674: warning: assignment makes pointer from integer without a cast drivers/net/stmmac/stmmac_main.c:1761: error: implicit declaration of function 'iounmap' make[3]: *** [drivers/net/stmmac/stmmac_main.o] Error 1 Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Giuseppe CAVALLARO <peppe.cavallaro@st.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 8月, 2010 1 次提交
-
-
由 David S. Miller 提交于
Based upon a report by Stephen Rothwell. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2010 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This patch removes the CPU_SUBTYPE_ST40 dependency in the driver's Kconfig. In fact, this option has been removed in the commit: f9669187 as reported by Christian Dietrich. Note that the driver remains tested on STM platforms, only. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2010 1 次提交
-
-
由 Carmelo AMOROSO 提交于
stmmac uses crc32 functions so it needs to select CRC32. Fixes build error: drivers/built-in.o: In function `dwmac1000_set_filter': dwmac1000_core.c:(.text+0x3c380): undefined reference to `crc32_le' dwmac1000_core.c:(.text+0x3c384): undefined reference to `bitrev32' Signed-off-by: NCarmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2010 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2009 1 次提交
-
-
由 Giuseppe Cavallaro 提交于
This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers (Synopsys IP blocks). Driver documentation: o http://stlinux.com/drupal/kernel/network/stmmac Revisions: o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions Performances: o http://stlinux.com/drupal/benchmarks/networking/stmmacSigned-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-