- 27 1月, 2012 9 次提交
-
-
由 Ryan Mallon 提交于
Both the suspend and resume functions incorrectly set psbfb = to_psb_fb(NULL) outside of the loop over all of the framebuffers. Fix this by moving the assignment of psbfb inside the loop and removing the initialisation of fb. Signed-off-by: NRyan Mallon <rmallon@gmail.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes * 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung: drm/exynos: fixed pm feature for fimd module. MAINTAINERS: added maintainer entry for Exynos DRM Driver. drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD drm/exynos: fix build dependency for DRM_EXYNOS_HDMI drm/exynos: use release_mem_region instead of release_resource
-
由 Inki Dae 提交于
this patch separates fimd specific power on/off function from pm function and the pm interfaces will call that function for power on or off. and also removes unnecessary codes of resume function. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
I'd like to add my colleagues who dedicated to developing and improving our driver to maintainer entry. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
FB based FIMD and DRM based FIMD drivers use same hardware so with this patch, only one of them would be selected. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Seung-Woo Kim 提交于
DRM_EXYNOS_HDMI driver and VIDEO_SAMSUNG_S5P_TV driver should be not enabled at once because they use same HW blocks. So dependency for DRM_EXYNOS_HDMI is fixed to check VIDEO_SAMSUNG_S5P_TV=n. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Seung-Woo Kim 提交于
To make a api pair of request_mem_region and release_mem_region, release_mem_region is used instead of release_resource. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Michal Kubecek 提交于
In error cleanup of agp_backend_initialize() and in agp_backend_cleanup(), agp_destroy_page() is passed virtual address of the scratch page. This leads to a kernel warning if the initialization fails (or upon regular cleanup) as pointer to struct page should be passed instead. Signed-off-by: NMichal Kubecek <mkubecek@suse.cz> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~keithp/linux由 Dave Airlie 提交于
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: (24 commits) drm/i915: fixup forcewake spinlock fallout in drpc debugfs function drm/i915: debugfs: show semaphore registers also on gen7 drm/i915: allow userspace forcewake references also on gen7 drm/i915: Re-enable gen7 RC6 and GPU turbo after resume. drm/i915: Correct debugfs printout for RC1e. Revert "drm/i915: Work around gen7 BLT ring synchronization issues." drm/i915: rip out the HWSTAM missed irq workaround drm/i915: paper over missed irq issues with force wake voodoo drm/i915: Hold gt_lock across forcewake register reads drm/i915: Hold gt_lock during reset drm/i915: Move reset forcewake processing to gen6_do_reset drm/i915: protect force_wake_(get|put) with the gt_lock drm/i915: convert force_wake_get to func pointer in the gpu reset code drm/i915: sprite init failure on pre-SNB is not a failure drm/i915: VBT Parser cleanup for eDP block drm/i915: mask transcoder select bits before setting them on LVDS drm/i915: Add Clientron E830 to the ignore LVDS list CHROMIUM: i915: Add DMI override to skip CRT initialization on ZGB drm/i915: handle 3rd pipe drm/i915: simplify pipe checking ...
-
- 26 1月, 2012 2 次提交
-
-
由 Ben Skeggs 提交于
Both changes in dc97b340 cause serious regressions in the nouveau driver. move_notify() was originally able to presume that bo->mem is the old node, and new_mem is the new node. The above commit moves the call to move_notify() to after move() has been done, which means that now, sometimes, new_mem isn't the new node at all, bo->mem is, and new_mem points at a stale, possibly-just-been-killed-by-move node. This is clearly not a good situation. This patch reverts this change, and replaces it with a cleanup in the move() failure path instead. The second issue is that the call to move_notify() from cleanup_memtype_use() causes the TTM ghost objects to get passed into the driver. This is clearly bad as the driver knows nothing about these "fake" TTM BOs, and ends up accessing uninitialised memory. I worked around this in nouveau's move_notify() hook by ensuring the BO destructor was nouveau's. I don't particularly like this solution, and would rather TTM never pass the driver these objects. However, I don't clearly understand the reason why we're calling move_notify() here anyway and am happy to work around the problem in nouveau instead of breaking the behaviour expected by other drivers. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com> Cc: Jerome Glisse <j.glisse@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
My forcewake spinlock patches have a functional conflict with Ben Widawsky's gen6 drpc support for debugfs. Result was a benign warning about trying to read an non-atomic variabla with atomic_read. Note that the entire check is racy anyway and purely informational. Also update it to reflect the forcewake voodoo changes, the kernel can now also hold onto a forcewake reference for longer times. Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NBen Widawsky <ben@bwidawsk.net> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
- 25 1月, 2012 15 次提交
-
-
由 Jerome Glisse 提交于
If GPU lockup is detected in ib_pool get we are holding the ib_pool mutex that will be needed by the GPU reset code. As ib_pool code is safe to be reentrant from GPU reset code we should not block if we are trying to get the ib pool lock on the behalf of the same userspace caller, thus use the radeon_mutex_lock helper. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
Silence out the lock dependency warning by moving bo allocation out of ib mutex protected section. Might lead to useless temporary allocation but it's not harmful as such things only happen at initialization. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
If the master tries to authenticate a client using drm_authmagic and that client has already closed its drm file descriptor, either wilfully or because it was terminated, the call to drm_authmagic will dereference a stale pointer into kmalloc'ed memory and corrupt it. Typically this results in a hard system hang. This patch fixes that problem by removing any authentication tokens (struct drm_magic_entry) open for a file descriptor when that file descriptor is closed. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
Corresponding changes to improve our error_state are pending some other patches to clean up things first. Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: NKeith Packard <keithp@keithp.com> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
由 Daniel Vetter 提交于
We need this to correctly access registers in the gt power well from userspace. Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: NKeith Packard <keithp@keithp.com> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
由 Eric Anholt 提交于
Signed-off-by: NEric Anholt <eric@anholt.net> Cc: stable@vger.kernel.org Reviewed-by: NKeith Packard <keithp@keithp.com> Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: NKenneth Graunke <kenneth@whitecape.org> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
由 Eric Anholt 提交于
We had two things in a row claiming to be RC6. Signed-off-by: NEric Anholt <eric@anholt.net> Reviewed-by: NKeith Packard <keithp@keithp.com> Reviewed-by: NBen Widawsky <ben@bwidawsk.net> Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: NKenneth Graunke <kenneth@whitecape.org> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
由 Alan Cox 提交于
GMA500 did it the old way and it's been on the TODO list to fix. Current kernels now blow up if we use the old way so we'd better do the work ! Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
HDMI 1.3 defines single link clocks up to 340 Mhz. Refine the current dual link checks to only enable dual link for DVI > 165 Mhz or HDMI > 340 Mhz if the hw supports HDMI 1.3 (DCE3+). Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44755Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
We were previously just checking for audio. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
dig transmitter control table only has ENABLE/DISABLE actions on DCE4.1/DCE5. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44955Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Needs to happen earlier in the mode set. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
We really only need to set it up once on init or resume rather than on every mode set. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Igor Murzov 提交于
Return a number of bytes read in radeon_atrm_get_bios_chunk() and properly check this value in radeon_atrm_get_bios(). If radeon_atrm_get_bios_chunk() read less bytes then were requested, it means that it finished reading bios data. Prior to this patch, condition in radeon_atrm_get_bios() was always equivalent to "if (ATRM_BIOS_PAGE <= 0)", so it was always false, thus radeon_atrm_get_bios() was trying to read past the bios data wasting boot time. On my lenovo ideapad u455 laptop this patch drops bios reading time from ~5.5s to ~1.5s. Signed-off-by: NIgor Murzov <e-mail@date.by> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Igor Murzov 提交于
At a boot time I observed following bug: BUG: unable to handle kernel paging request at ffff8800a4244000 IP: [<ffffffff81275b5b>] memcpy+0xb/0x120 PGD 1816063 PUD 1fe7d067 PMD 1ff9f067 PTE 80000000a4244160 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: btusb bluetooth brcmsmac brcmutil crc8 cordic b43 radeon(+) mac80211 cfg80211 ttm ohci_hcd drm_kms_helper rfkill drm ssb agpgart mmc_core sp5100_tco video battery ac thermal processor rtc_cmos thermal_sys snd_hda_codec_hdmi joydev snd_hda_codec_conexant button bcma pcmcia snd_hda_intel snd_hda_codec snd_hwdep snd_pcm shpchp pcmcia_core k8temp snd_timer atl1c snd psmouse hwmon i2c_piix4 i2c_algo_bit soundcore evdev i2c_core ehci_hcd sg serio_raw snd_page_alloc loop btrfs Pid: 1008, comm: modprobe Not tainted 3.3.0-rc1 #21 LENOVO 20046 /AMD CRB RIP: 0010:[<ffffffff81275b5b>] [<ffffffff81275b5b>] memcpy+0xb/0x120 RSP: 0018:ffff8800aa72db00 EFLAGS: 00010246 RAX: ffff8800a4150000 RBX: 0000000000001000 RCX: 0000000000000087 RDX: 0000000000000000 RSI: ffff8800a4244000 RDI: ffff8800a4150bc8 RBP: ffff8800aa72db78 R08: 0000000000000010 R09: ffffffff8174bbec R10: ffffffff812ee010 R11: 0000000000000001 R12: 0000000000001000 R13: 0000000000010000 R14: ffff8800a4140000 R15: ffff8800aaba1800 FS: 00007ff9a3bd4720(0000) GS:ffff8800afa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff8800a4244000 CR3: 00000000a9c18000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 1008, threadinfo ffff8800aa72c000, task ffff8800aa0e4000) Stack: ffffffffa04e7c7b 0000000000000001 0000000000010000 ffff8800aa72db28 ffffffff00000001 0000000000001000 ffffffff8113cbef 0000000000000020 ffff8800a4243420 ffff880000000002 ffff8800aa72db08 ffff8800a9d42000 Call Trace: [<ffffffffa04e7c7b>] ? radeon_atrm_get_bios_chunk+0x8b/0xd0 [radeon] [<ffffffff8113cbef>] ? kmalloc_order_trace+0x3f/0xb0 [<ffffffffa04a9298>] radeon_get_bios+0x68/0x2f0 [radeon] [<ffffffffa04c7a30>] rv770_init+0x40/0x280 [radeon] [<ffffffffa047d740>] radeon_device_init+0x560/0x600 [radeon] [<ffffffffa047ef4f>] radeon_driver_load_kms+0xaf/0x170 [radeon] [<ffffffffa043cdde>] drm_get_pci_dev+0x18e/0x2c0 [drm] [<ffffffffa04e7e95>] radeon_pci_probe+0xad/0xb5 [radeon] [<ffffffff81296c5f>] local_pci_probe+0x5f/0xd0 [<ffffffff81297418>] pci_device_probe+0x88/0xb0 [<ffffffff813417aa>] ? driver_sysfs_add+0x7a/0xb0 [<ffffffff813418d8>] really_probe+0x68/0x180 [<ffffffff81341be5>] driver_probe_device+0x45/0x70 [<ffffffff81341cb3>] __driver_attach+0xa3/0xb0 [<ffffffff81341c10>] ? driver_probe_device+0x70/0x70 [<ffffffff813400ce>] bus_for_each_dev+0x5e/0x90 [<ffffffff8134172e>] driver_attach+0x1e/0x20 [<ffffffff81341298>] bus_add_driver+0xc8/0x280 [<ffffffff813422c6>] driver_register+0x76/0x140 [<ffffffff812976d6>] __pci_register_driver+0x66/0xe0 [<ffffffffa043d021>] drm_pci_init+0x111/0x120 [drm] [<ffffffff8133c67a>] ? vga_switcheroo_register_handler+0x3a/0x60 [<ffffffffa0229000>] ? 0xffffffffa0228fff [<ffffffffa02290ec>] radeon_init+0xec/0xee [radeon] [<ffffffff810002f2>] do_one_initcall+0x42/0x180 [<ffffffff8109d8d2>] sys_init_module+0x92/0x1e0 [<ffffffff815407a9>] system_call_fastpath+0x16/0x1b Code: 58 2a 43 50 88 43 4e 48 83 c4 08 5b c9 c3 66 90 e8 cb fd ff ff eb e6 90 90 90 90 90 90 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c RIP [<ffffffff81275b5b>] memcpy+0xb/0x120 RSP <ffff8800aa72db00> CR2: ffff8800a4244000 ---[ end trace fcffa1599cf56382 ]--- Call to acpi_evaluate_object() not always returns 4096 bytes chunks, on my system it can return 2048 bytes chunk, so pass the length of retrieved chunk to memcpy(), not the length of the recieving buffer. Signed-off-by: NIgor Murzov <e-mail@date.by> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 23 1月, 2012 3 次提交
-
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Interrupts only work with MSIs. https://bugs.freedesktop.org/show_bug.cgi?id=37679Reported-by: NDmitry Podgorny <pasis.uax@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jesper Juhl 提交于
In sis_driver_load(), the only use of 'ret' is as the return value from the function, unfortunately it is never initialized, so the function just returns garbage when it succeeds. To fix that, remove the variable and just return 0 directly on success. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 21 1月, 2012 1 次提交
-
-
由 Keith Packard 提交于
This reverts commit 42ff6572. New forcewake voodoo makes this no longer necessary. Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
- 20 1月, 2012 10 次提交
-
-
由 Daniel Vetter 提交于
With the new ducttape of much finer quality, this seems to be no longer necessary. Tested on my ivb and snb machine with the usual suspects of testcases. (v2 by keithp -- limited change to IVB only for now) Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Acked-by: NBen Widawsky <ben@bwidawsk.net> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/accounting, proc: Fix /proc/stat interrupts sum * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore x86/kprobes: Fix typo transferred from Intel manual * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits x86, tsc: Fix SMI induced variation in quick_pit_calibrate() x86, opcode: ANDN and Group 17 in x86-opcode-map.txt x86/kconfig: Move the ZONE_DMA entry under a menu x86/UV2: Add accounting for BAU strong nacks x86/UV2: Ack BAU interrupt earlier x86/UV2: Remove stale no-resources test for UV2 BAU x86/UV2: Work around BAU bug x86/UV2: Fix BAU destination timeout initialization x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode x86: Get rid of dubious one-bit signed bitfield
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
gpio bug fixes for v3.3 * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio: tps65910: Use correct offset for gpio initialization gpio/it8761e: Restrict it8761e gpio driver to x86. gpio-ml-ioh: cleanup __iomem annotation usage gpio-ml-ioh: cleanup NULL pointer checking gpio-pch: cleanup __iomem annotation usage gpio-pch: cleanup NULL pointer checking
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qnx4: don't leak ->BitMap on late failure exits qnx4: reduce the insane nesting in qnx4_checkroot() qnx4: di_fname is an array, for crying out loud... vfs: remove printk from set_nlink() wake up s_wait_unfrozen when ->freeze_fs fails
-
由 H. Peter Anvin 提交于
In checkin 303395ac x86: Generate system call tables and unistd_*.h from tables the feature macros in <asm/unistd.h> were unified between 32 and 64 bits. Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was inadvertently dropped. Reported-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com
-
由 H. Peter Anvin 提交于
-
由 Daniel Vetter 提交于
Two things seem to do the trick on my ivb machine here: - prevent the gt from powering down while waiting for seqno notification interrupts by grabbing the force_wake in get_irq (and dropping it in put_irq again). - ordering writes from the ring's CS by reading a CS register, ACTHD seems to work. Only the blt&bsd ring on ivb seem to be massively affected by this, but for paranoia do this dance also on the render ring and on snb (i.e. all gpus with forcewake). Tested with Eric's glCopyPixels loop which without this patch scores a missed irq every few seconds. This patch needs my forcewake rework to use a spinlock instead of dev->struct_mutex. After crawling through docs a lot I've found the following nugget: Internal doc "SNB GT PM Programming Guide", Section 4.3.1: "GT does not generate interrupts while in RC6 (by design)" So it looks like rc6 and irq generation are indeed related. v2: Improve the comment per Eugeni Dodonov's suggestion. v3: Add the documentation snipped. Also restrict the w/a to ivb only for -fixes, as suggested by Keith Packard. Cc: stable@kernel.org Cc: Eric Anholt <eric@anholt.net> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Eugeni Dodonov <eugeni.dodonov@intel.com> Tested-by: NEugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com> Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NKeith Packard <keithp@keithp.com>
-
由 Keith Packard 提交于
Along with the previous patch to make the reset operation protected by the gt_lock as well, this ensures that all register read operations will occur with the forcewake hardware enabled. As an added bonus, this makes read operations more efficient by taking the spinlock only once per read instead of twice. Signed-off-by: NKeith Packard <keithp@keithp.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Keith Packard 提交于
This ensures that no register reads occur while the forcewake state of the hardware is indeterminate during the reset operation. Signed-off-by: NKeith Packard <keithp@keithp.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-