- 25 7月, 2016 8 次提交
-
-
由 Trond Myklebust 提交于
In cases where we need to send a layoutreturn in order to propagate an error, we should not tie that to a specific layout stateid. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
When we return NFS_OK to the CB_LAYOUTRECALL, we are required to send a layoutreturn that "completes" that layout recall request, using the correct stateid. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
We want to evaluate in this order: If the client holds no layout for this inode, then return NFS4ERR_NOMATCHING_LAYOUT; it probably forgot the layout. If the client finds the inode among the list of layouts, but the corresponding stateid has not yet been initialised, then return NFS4ERR_DELAY to ask the server to retry once the outstanding LAYOUTGET is complete. If the current layout stateid's "other" field does not match the recalled stateid, return NFS4ERR_BAD_STATEID. If already processing a layout recall with a newer stateid, return NFS4ERR_OLD_STATEID. This can only happens for servers that are non-compliant with the NFSv4.1 protocol. If already processing a layout recall with an older stateid, return NFS4ERR_DELAY to ask the server to retry once the outstanding LAYOUTRETURN is complete. Again, this is technically incompliant with the NFSv4.1 protocol. If the current layout sequence id is newer than the recalled stateid's sequence id, return NFS4ERR_OLD_STATEID. This too implies protocol non-compliance. If the current layout sequence id is older than the recalled stateid's sequence id+1, return NFS4ERR_DELAY. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Currently, pnfs_set_layout_stateid() will update the layout sequence id barrier only if the stateid itself is newer than the current layout stateid. However in a situation where multiple LAYOUTGET calls and a LAYOUTRETURN raced, it is entirely possible for one of the LAYOUTGET to set the current stateid to something newer than the LAYOUTRETURN that needs to set the barrier. The fix is to allow the "update_barrier" flag to force a check as to whether or not the barrier needs to be updated. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
If the layout stateid is invalid, then pnfs_set_layout_stateid() must always initialise it. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Ensure that we don't carry over layoutreturn info from a previous incarnation of this layout. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
If the layout was completely returned, then ignore the returned layout stateid. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Needed in order to work on top of pNFS changes in Linus' upstream kernel.
-
- 23 7月, 2016 1 次提交
-
-
由 Artem Savkov 提交于
When bl_parse_deviceid() fails in bl_alloc_deviceid_node() on blkdev_get_by_*() step we get an pnfs_block_dev struct that is uninitialized except for bdev field which is set to whatever error blkdev_get_by_*() returns. bl_free_device() then tries to call blkdev_put() if bdev is not 0 resulting in a wrong pointer dereference. Fixing this by setting bdev in struct pnfs_block_dev only if we didn't get an error from blkdev_get_by_*(). Signed-off-by: NArtem Savkov <asavkov@redhat.com> Reviewed-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 16 7月, 2016 5 次提交
-
-
由 Kinglong Mee 提交于
Avoid nfs return uuids/devices larger than maximum. Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Kinglong Mee 提交于
Avoid a bad nfs server return an unaligned length of signature. Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
Instead of reusing the wwn-* names for multipath devices nodes RHEL and Fedora introduce new dm-mpath-uuid-* nodes with a slightly different naming scheme. Try these names first to ensure we always get a multipath-capable device if it exists. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
The current code works with the standard udev/systemd names, but we'll have to add another method in the next patch. Refactor it into a separate helper to make room for the new variant. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
This was fixed for the original block layout code a while ago, but also needs to be fixed for the SCSI layout path. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 30 6月, 2016 6 次提交
-
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Anna Schumaker: "Stable bugfixes: - Fix _cancel_empty_pagelist - Fix a double page unlock - Make nfs_atomic_open() call d_drop() on all ->open_context() errors. - Fix another OPEN_DOWNGRADE bug Other bugfixes: - Ensure we handle delegation errors in nfs4_proc_layoutget() - Layout stateids start out as being invalid - Add sparse lock annotations for pnfs_find_alloc_layout - Handle bad delegation stateids in nfs4_layoutget_handle_exception - Fix up O_DIRECT results - Fix potential use after free of state in nfs4_do_reclaim. - Mark the layout stateid invalid when all segments are removed - Don't let readdirplus revalidate an inode that was marked as stale - Fix potential race in nfs_fhget() - Fix an unused variable warning" * tag 'nfs-for-4.7-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Fix another OPEN_DOWNGRADE bug make nfs_atomic_open() call d_drop() on all ->open_context() errors. NFS: Fix an unused variable warning NFS: Fix potential race in nfs_fhget() NFS: Don't let readdirplus revalidate an inode that was marked as stale NFSv4.1/pnfs: Mark the layout stateid invalid when all segments are removed NFS: Fix a double page unlock pnfs_nfs: fix _cancel_empty_pagelist nfs4: Fix potential use after free of state in nfs4_do_reclaim. NFS: Fix up O_DIRECT results NFS/pnfs: handle bad delegation stateids in nfs4_layoutget_handle_exception NFSv4.1/pnfs: Add sparse lock annotations for pnfs_find_alloc_layout NFSv4.1/pnfs: Layout stateids start out as being invalid NFSv4.1/pnfs: Ensure we handle delegation errors in nfs4_proc_layoutget()
-
git://git.infradead.org/users/pcmoore/audit由 Linus Torvalds 提交于
Pull audit fixes from Paul Moore: "Two small patches to fix audit problems in 4.7-rcX: the first fixes a potential kref leak, the second removes some header file noise. The first is an important bug fix that really should go in before 4.7 is released, the second is not critical, but falls into the very-nice- to-have category so I'm including in the pull request. Both patches are straightforward, self-contained, and pass our testsuite without problem" * 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit: audit: move audit_get_tty to reduce scope and kabi changes audit: move calcs after alloc and check when logging set loginuid
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "I've been traveling so this accumulates more than week or so of bug fixing. It perhaps looks a little worse than it really is. 1) Fix deadlock in ath10k driver, from Ben Greear. 2) Increase scan timeout in iwlwifi, from Luca Coelho. 3) Unbreak STP by properly reinjecting STP packets back into the stack. Regression fix from Ido Schimmel. 4) Mediatek driver fixes (missing malloc failure checks, leaking of scratch memory, wrong indexing when mapping TX buffers, etc.) from John Crispin. 5) Fix endianness bug in icmpv6_err() handler, from Hannes Frederic Sowa. 6) Fix hashing of flows in UDP in the ruseport case, from Xuemin Su. 7) Fix netlink notifications in ovs for tunnels, delete link messages are never emitted because of how the device registry state is handled. From Nicolas Dichtel. 8) Conntrack module leaks kmemcache on unload, from Florian Westphal. 9) Prevent endless jump loops in nft rules, from Liping Zhang and Pablo Neira Ayuso. 10) Not early enough spinlock initialization in mlx4, from Eric Dumazet. 11) Bind refcount leak in act_ipt, from Cong WANG. 12) Missing RCU locking in HTB scheduler, from Florian Westphal. 13) Several small MACSEC bug fixes from Sabrina Dubroca (missing RCU barrier, using heap for SG and IV, and erroneous use of async flag when allocating AEAD conext.) 14) RCU handling fix in TIPC, from Ying Xue. 15) Pass correct protocol down into ipv4_{update_pmtu,redirect}() in SIT driver, from Simon Horman. 16) Socket timer deadlock fix in TIPC from Jon Paul Maloy. 17) Fix potential deadlock in team enslave, from Ido Schimmel. 18) Memory leak in KCM procfs handling, from Jiri Slaby. 19) ESN generation fix in ipv4 ESP, from Herbert Xu. 20) Fix GFP_KERNEL allocations with locks held in act_ife, from Cong WANG. 21) Use after free in netem, from Eric Dumazet. 22) Uninitialized last assert time in multicast router code, from Tom Goff. 23) Skip raw sockets in sock_diag destruction broadcast, from Willem de Bruijn. 24) Fix link status reporting in thunderx, from Sunil Goutham. 25) Limit resegmentation of retransmit queue so that we do not retransmit too large GSO frames. From Eric Dumazet. 26) Delay bpf program release after grace period, from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (141 commits) openvswitch: fix conntrack netlink event delivery qed: Protect the doorbell BAR with the write barriers. neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit() e1000e: keep VLAN interfaces functional after rxvlan off cfg80211: fix proto in ieee80211_data_to_8023 for frames without LLC header qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag() bpf, perf: delay release of BPF prog after grace period net: bridge: fix vlan stats continue counter tcp: do not send too big packets at retransmit time ibmvnic: fix to use list_for_each_safe() when delete items net: thunderx: Fix TL4 configuration for secondary Qsets net: thunderx: Fix link status reporting net/mlx5e: Reorganize ethtool statistics net/mlx5e: Fix number of PFC counters reported to ethtool net/mlx5e: Prevent adding the same vxlan port net/mlx5e: Check for BlueFlame capability before allocating SQ uar net/mlx5e: Change enum to better reflect usage net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devices net/mlx5: Update command strings net: marvell: Add separate config ANEG function for Marvell 88E1111 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "Another two bug fixes for 4.7: - The revert of patch which removed boot information for systems using an intermediate boot kernel, e.g. the SLES12 grub setup. - A fix for an incorrect inline assembly constraint that causes broken code to be generated with gcc 4.8.5" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix test_fp_ctl inline assembly contraints Revert "s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL"
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: "Here are a bunch of fixes for pin control. Just drivers and a MAINTAINERS fixup: - Driver fixes for i.MX, single register, Tegra and BayTrail. - MAINTAINERS entry for the documentation" * tag 'pinctrl-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: baytrail: Fix mingled clock pins MAINTAINERS: belong Documentation/pinctrl.txt properly pinctrl: tegra: Fix build dependency gpio: tegra: Make lockdep class file-scoped pinctrl: single: Fix missing flush of posted write for a wakeirq pinctrl: imx: Do not treat a PIN without MUX register as an error
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "Three fix patches. Two are for cgroup / css init failure path. The last one makes css_set_lock irq-safe as the deadline scheduler ends up calling put_css_set() from irq context" * 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Disable IRQs while holding css_set_lock cgroup: set css->id to -1 during init cgroup: remove redundant cleanup in css_create
-
- 29 6月, 2016 20 次提交
-
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2016-06-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just two small fixes * fix mesh peer link counter, decrement wasn't always done at all * fix ethertype (length) for packets without RFC 1042 or bridge tunnel header ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samuel Gauthier 提交于
Only the first and last netlink message for a particular conntrack are actually sent. The first message is sent through nf_conntrack_confirm when the conntrack is committed. The last one is sent when the conntrack is destroyed on timeout. The other conntrack state change messages are not advertised. When the conntrack subsystem is used from netfilter, nf_conntrack_confirm is called for each packet, from the postrouting hook, which in turn calls nf_ct_deliver_cached_events to send the state change netlink messages. This commit fixes the problem by calling nf_ct_deliver_cached_events in the non-commit case as well. Fixes: 7f8a436e ("openvswitch: Add conntrack action") CC: Joe Stringer <joestringer@nicira.com> CC: Justin Pettit <jpettit@nicira.com> CC: Andy Zhou <azhou@nicira.com> CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: NSamuel Gauthier <samuel.gauthier@6wind.com> Acked-by: NJoe Stringer <joe@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudarsana Reddy Kalluru 提交于
SPQ doorbell is currently protected with the compilation barrier. Under the stress scenarios, we may get into a state where (due to the weak ordering) several ramrod doorbells were written to the BAR with an out-of-order producer values. Need to change the barrier type to a write barrier to make sure that the write buffer is flushed after each doorbell. Signed-off-by: NSudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Barroso 提交于
neigh_xmit() expects to be called inside an RCU-bh read side critical section, and while one of its two current callers gets this right, the other one doesn't. More specifically, neigh_xmit() has two callers, mpls_forward() and mpls_output(), and while both callers call neigh_xmit() under rcu_read_lock(), this provides sufficient protection for neigh_xmit() only in the case of mpls_forward(), as that is always called from softirq context and therefore doesn't need explicit BH protection, while mpls_output() can be called from process context with softirqs enabled. When mpls_output() is called from process context, with softirqs enabled, we can be preempted by a softirq at any time, and RCU-bh considers the completion of a softirq as signaling the end of any pending read-side critical sections, so if we do get a softirq while we are in the part of neigh_xmit() that expects to be run inside an RCU-bh read side critical section, we can end up with an unexpected RCU grace period running right in the middle of that critical section, making things go boom. This patch fixes this impedance mismatch in the callee, by making neigh_xmit() always take rcu_read_{,un}lock_bh() around the code that expects to be treated as an RCU-bh read side critical section, as this seems a safer option than fixing it in the callers. Fixes: 4fd3d7d9 ("neigh: Add helper function neigh_xmit") Signed-off-by: NDavid Barroso <dbarroso@fastly.com> Signed-off-by: NLennert Buytenhek <lbuytenhek@fastly.com> Acked-by: NDavid Ahern <dsa@cumulusnetworks.com> Acked-by: NRobert Shearman <rshearma@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarod Wilson 提交于
I've got a bug report about an e1000e interface, where a VLAN interface is set up on top of it: $ ip link add link ens1f0 name ens1f0.99 type vlan id 99 $ ip link set ens1f0 up $ ip link set ens1f0.99 up $ ip addr add 192.168.99.92 dev ens1f0.99 At this point, I can ping another host on vlan 99, ip 192.168.99.91. However, if I do the following: $ ethtool -K ens1f0 rxvlan off Then no traffic passes on ens1f0.99. It comes back if I toggle rxvlan on again. I'm not sure if this is actually intended behavior, or if there's a lack of software VLAN stripping fallback, or what, but things continue to work if I simply don't call e1000e_vlan_strip_disable() if there are active VLANs (plagiarizing a function from the e1000 driver here) on the interface. Also slipped a related-ish fix to the kerneldoc text for e1000e_vlan_strip_disable here... Signed-off-by: NJarod Wilson <jarod@redhat.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Felix Fietkau 提交于
The PDU length of incoming LLC frames is set to the total skb payload size in __ieee80211_data_to_8023() of net/wireless/util.c which incorrectly includes the length of the IEEE 802.11 header. The resulting LLC frame header has a too large PDU length, causing the llc_fixup_skb() function of net/llc/llc_input.c to reject the incoming skb, effectively breaking STP. Solve the problem by properly substracting the IEEE 802.11 frame header size from the PDU length, allowing the LLC processor to pick up the incoming control messages. Special thanks to Gerry Rozema for tracking down the regression and proposing a suitable patch. Fixes: 2d1c304c ("cfg80211: add function for 802.3 conversion with separate output buffer") Cc: stable@vger.kernel.org Reported-by: NGerry Rozema <gerryr@rozeware.com> Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
-
由 Dan Carpenter 提交于
There is a static checker warning here "warn: mask and shift to zero" and the code sets "ring" to zero every time. From looking at how QLCNIC_FETCH_RING_ID() is used in qlcnic_83xx_process_rcv_ring() the qlcnic_83xx_hndl() should be removed. Fixes: 4be41e92 ('qlcnic: 83xx data path routines') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Commit dead9f29 ("perf: Fix race in BPF program unregister") moved destruction of BPF program from free_event_rcu() callback to __free_event(), which is problematic if used with tail calls: if prog A is attached as trace event directly, but at the same time present in a tail call map used by another trace event program elsewhere, then we need to delay destruction via RCU grace period since it can still be in use by the program doing the tail call (the prog first needs to be dropped from the tail call map, then trace event with prog A attached destroyed, so we get immediate destruction). Fixes: dead9f29 ("perf: Fix race in BPF program unregister") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Cc: Jann Horn <jann@thejh.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
I made a dumb off-by-one mistake when I added the vlan stats counter dumping code. The increment should happen before the check, not after otherwise we miss one entry when we continue dumping. Fixes: a60c0903 ("bridge: netlink: export per-vlan stats") Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Arjun reported a bug in TCP stack and bisected it to a recent commit. In case where we process SACK, we can coalesce multiple skbs into fat ones (tcp_shift_skb_data()), to lower write queue overhead, because we do not expect to retransmit these packets. However, SACK reneging can happen, forcing the sender to retransmit all these packets. If skb->len is above 64KB, we then send buggy IP packets that could hang TSO engine on cxgb4. Neal suggested to use tcp_tso_autosize() instead of tp->gso_segs so that we cook packets of optimal size vs TCP/pacing. Thanks to Arjun for reporting the bug and running the tests ! Fixes: 10d3be56 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NArjun V <arjun@chelsio.com> Tested-by: NArjun V <arjun@chelsio.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Since we will remove items off the list using list_del() we need to use a safe version of the list_for_each() macro aptly named list_for_each_safe(). Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sunil Goutham says: ==================== net: thunderx: Miscellaneous fixes This 2 patch series fixes issues w.r.t physical link status reporting and transmit datapath configuration for secondary qsets. Changes from v1: Fixed lmac disable sequence for interfaces of type SGMII. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
TL4 calculation for a given SQ of secondary Qsets is incorrect and goes out of bounds and also for some SQ's TL4 chosen will transmit data via a different BGX interface and not same as primary Qset's interface. This patch fixes this issue. Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
Check for SMU RX local/remote faults along with SPU LINK status. Otherwise at times link is UP at our end but DOWN at link partner's side. Also due to an issue in BGX it's rarely seen that initialization doesn't happen properly and SMU RX reports faults with everything fine at SPU. This patch tries to reinitialize LMAC to fix it. Also fixed LMAC disable sequence to properly bring down link. Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: NTao Wang <tao.wang@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes#2 for 4.7-rc The following series provides one-liners fixes for mlx5 driver plus one medium patch to reorganize ethtool counters reporting. Highlights: - Added MODIFY_FLOW_TABLE to command strings table - Add ConnectX-5 PCIe 4.0 to list of supported devices - Rename ASYNC_EVENTS enum - Enable BlueFlame only when supported by device - Avoid adding same vxlan port twice - Report the correct number of PFC counters - Reorganize ethtool reported counters and remove duplications ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gal Pressman 提交于
Categorize and reorganize ethtool statistics counters by renaming to "rx_*" and "tx_*" and removing redundant and duplicated counters, this way they are easier to grasp and more user friendly. Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gal Pressman 提交于
Number of PFC counters used to count only number of priorities with PFC enabled, but each priority has more than one counter, hence the need to multiply it by the number of PFC counters per priority. Fixes: cf678570 ('net/mlx5e: Add per priority group to PPort counters') Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthew Finlay 提交于
Do not allow the same vxlan udp port to be added to the device more than once. Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: NMatthew Finlay <matt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gal Pressman 提交于
Previous to this patch mapping was always set to write combining without checking whether BlueFlame is supported in the device. Fixes: 0ba42241 ('net/mlx5: Fix global UAR mapping') Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eli Cohen 提交于
Change MLX5E_STATE_ASYNC_EVENTS_ENABLE to MLX5E_STATE_ASYNC_EVENTS_ENABLED since it represent a state and not an operation. Fixes: acff797c ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-