Functions which end in a BUG() statement and skip the return statement
cause compile warnings on s390, e.g.:

mm/bootmem.c: In function 'mark_bootmem':
mm/bootmem.c:321: warning: control reaches end of non-void function

To avoid the warning add an endless loop to the BUG() macro.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

disabled_wait() won't return, so add an __attribute__((noreturn)).
This will remove a false positive finding which our internal code
checker reports.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

To check if multipath is available we count the bits set in lpm,
which could change over time (via configure [on|off] of a path).

The following patch uses the pim (which is persistent) for this
decision.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Sometimes we change the pmcw configuration but don't call msch
to transmit these changes to the channel subsystem.

The patch fixes this by calling cio_commit_config in such cases.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

To change the configuration of a subchannel we alter the modifiable
bits of the subchannel's schib field and issue a modify subchannel.
There can be the case that not all changes were applied -or worse-
quietly overwritten by the hardware. With the next store subchannel
we obtain the current state of the hardware but lose our target
configuration.

With this patch we introduce a subchannel_config structure which
contains the target subchannel configuration. Additionally the msch
wrapper cio_modify is replaced with cio_commit_config which
copies the desired changes to a temporary schib. msch is then
called with the temporary schib. This schib is only written back
to the subchannel if all changes were applied.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

There is the chance that we get condition code 0 for a stsch but
the resulting schib is not vaild. In the current code there are
2 cases:
* we do a check for validity of the schib after stsch, but at this
  time we have already stored the invaild schib in the subchannel
  structure. This may lead to problems.
* we don't do a check for validity, which is not that good either.

The patch addresses both issues by introducing the stsch wrapper
cio_update_schib which performs stsch on a local schib. This schib
is only written back to the subchannel if it's valid.

side note: For some functions (chp_events) the return codes are
different now (-ENXIO vs -ENODEV) but this shouldn't do harm
since the caller doesn't check for _specific_ errors.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Check if a ccw device is registered via device_is_registered()
and not via the old kludge of checking the membership in driver
core internal klists.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Just put the cdev's reference count to give up our reference.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

If we fail the probe for an I/O subchannel, we won't be able
to unregister it again since there are no sch_event()
callbacks for unbound subchannels. Just succeed the probe in
any case and schedule unregistering the subchannel.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

There is a race between io_subchannel_register() and
io_subchannel_sch_event() which may cause a subchannel to be
unregistered because it is no longer operational before
io_subchannel_register() had run. We need to check whether the
subchannel is still registered before the ccw device can be
registered and just bail out if it is not.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Subchannel refcounting was incorrect in some places, especially
a refcount was missing when ccw_device_call_sch_unregister()
was called and the refcount was not correctly switched after
moving devices.

Fix this by establishing the following rules:
- The ccw_device obtains a reference on its parent subchannel
  when dev.parent is set and gives it up in its release
  function. This is needed because we need a parent reference
  for correct refcounting even before the ccw device is (if at
  all) registered.
- When calling device_move(), obtain a reference on the new
  subchannel before moving the ccw device and give up the
  reference on the old parent after moving. This brings the
  refcount in line with the first rule.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The current code attempts to get an extra reference count
for online devices by doing a get_device() in ccw_device_online()
and a put_device() in ccw_device_done(). However, this
- incorrectly obtains an extra reference for disconnected
  devices becoming available again (since they are already
  online)
- needs special checks for css_init_done in order to handle
  the console device
- is not obvious and
- may incorretly drop a reference count in ccw_device_done() if
  that function is called after path verification for a device
  that just became not operational.

So let's just get the reference in ccw_device_set_online() and
drop it in ccw_device_set_offline(). (Unfortunately, we still
need the special case in io_subchannel_probe().)
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Ensure atomicity of ungroup operation to prevent concurrent ungroup
and online processing which may lead to use-after-release situations.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Due to former patches a comment and device id initialization were
split from the addressed function call in io_subchannel_probe.

Move it back to where it belongs.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Values for the sac field have changed - update code accordingly.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Move cio_tpi() to the rest of the CONFIG_CCW_CONSOLE functions to
get rid of this one:

drivers/s390/cio/cio.c:115: warning: 'cio_tpi' defined but not used
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

A kernel compile on 31 bit gives the following warnings in ptrace.c:

arch/s390/kernel/ptrace.c: In function 'peek_user':
arch/s390/kernel/ptrace.c:207: warning: unused variable 'dummy'
arch/s390/kernel/ptrace.c: In function 'poke_user':
arch/s390/kernel/ptrace.c:315: warning: unused variable 'dummy'

Getting rid of the dummy variables removes the warnings.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

For CONFIG_SPARSEMEM_VMEMMAP=y on s390 I get warnings like

init/main.c: In function 'start_kernel':
init/main.c:641: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'int'

The warning can be suppressed with a cast to unsigned long in the
CONFIG_SPARSEMEM_VMEMMAP=y version of __page_to_pfn.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Provide a locking free version of iucv_message_receive and iucv_message_send
that do not call local_bh_enable in a spin_lock_(bh|irqsave)() context.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>

This patch introduces a new hypervisor console (HVC) back-end that provides
terminal access over the z/VM inter-user communication vehicle (IUCV).

The z/VM IUCV communication is independent of the regular tcp/ip network
and allows access even if there is no network connection between two
z/VM guest virtual machines.
The z/VM IUCV hypervisor console back-end helps the user to access a
z/VM guest virtual machine that lacks of network connectivity; and thus,
provides a "full-screen" terminal alternative to 3215/3270 terminal sessions.

Use the hvc_iucv=[0..8] kernel boot parameter to specify the number of
HVC terminals using a z/VM IUCV back-end.

A recent version of the s390-tools package is required to establish a
terminal connection to a z/VM IUCV hypervisor console back-end.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This implements just the basic function tracer (_mcount) backend for s390.
The dynamic variant will come later.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

__dasd_cleanup_cqr should be called with request_queue_lock held and
__dasd_block_process_erp with queue_lock
Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

SIM sense data are always 32 bit sense data so sense byte 27 bit 0
has not to be set.
Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

For a large number of I/O requests the values were shifted binary.
The shift was not transparent for the user because the shift value
was not displayed. To make this interface more human readable the
values are shifted decimal and the scale factor is displayed.
Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Register zfcp with the new /proc/service_level interface to report the
FCP microcode level. When the adapter goes offline or a channel path
disappears, zfcp unregisters, since the microcode version might change
and zfcp does not know about it.
Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add a new proc interface /proc/service_levels that allows any code
to report a relevant service level, e.g. the microcode level of
devices, the service level of the hypervisor, etc.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Hipersocket connections can encounter temporary busy conditions.
In case of the busy bit set we retry the SIGA operation immediatelly.
If the busy condition still persists after 100 ms we fail and report
the error to the upper layer. The second stage retry logic is removed.
In case of ongoing busy conditions the upper layer needs to reset the
connection.

The reporting of a SIGA error is now done synchronously to allow the
network driver to requeue the buffers. Also no error trace is created
for the temporary SIGA errors so the error message view is not flooded.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

- Use automatic acknowledgement of incoming buffers in QEBSM mode
- Move ACK for non-QEBSM mode always to the newest buffer to prevent
  a race with qdio_stop_polling
- Remove the polling spinlock, the upper layer drivers return new buffers
  in the same code path and could not run in parallel
- Don't flood the error log in case of no-target-buffer-empty
- In handle_inbound we check if we would overwrite an ACK'ed buffer, if so
  advance the pointer to the oldest ACK'ed buffer so we don't overwrite an
  empty buffer in qdio_stop_polling
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

- make qdio_trace a per device view
- remove s390dbf exceptions
- remove CONFIG_QDIO_DEBUG, not needed anymore if we check for the level
  before calling sprintf
- use snprintf for dbf entries
- add start markers to see if the dbf view wrapped
- add a global error view for all queues
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The QEBSM instructions are only available for CONFIG_64BIT, they are not
used under 31 bit. Make compiler happy about the false positive:

drivers/s390/cio/qdio_main.c: In function ?qdio_inbound_q_done?:
drivers/s390/cio/qdio_main.c:532: warning: ?state? may be used uninitialized in this function
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add counters for the eqbs and sqbs instructions that indicate how often
we issued the instructions and how often the instructions returned with
less buffers than specified.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

qeth needs to get the port count information before
qdio has allocated a page for the chsc operation.
Extend qdio_get_ssqd_desc() to store the data in the
specified structure.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Changed some symbol names for a better and clearer code.
Signed-off-by: NChristian Maaser <cmaaser@de.ibm.com>
Signed-off-by: NFelix Beck <beckf@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

When the machine supports AP adapter interrupts polling will be
switched off at module initialization and the driver will work in
interrupt mode.
Signed-off-by: NFelix Beck <felix.beck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

stfle will be needed by the ap_bus module to figure out wether the AP
queue adapter interruption facility is installed.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Since etr/stp don't need the old smp_call_function semantics anymore
we can convert s390 to the generic IPI infrastructure.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The work function dispatched with schedule_work() can be run twice
on different cpus because run_workqueue clears the WORK_STRUCT_PENDING
bit and then executes the function. Another cpu can call schedule_work()
again and run the work function a second time before the first call
is completed. This patch serialized the etr and stp work function with
a mutex.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>