Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 23 2月, 2019 1 次提交
    • J
      perf data: Add global path holder · 2d4f2799
      由 Jiri Olsa 提交于 
      Add a 'path' member to 'struct perf_data'. It will keep the configured
path for the data (const char *). The path in struct perf_data_file is
now dynamically allocated (duped) from it.

This scheme is useful/used in following patches where struct
perf_data::path holds the 'configure' directory path and struct
perf_data_file::path holds the allocated path for specific files.

Also it actually makes the code little simpler.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org
[ Fixup data-convert-bt.c missing conversion ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2d4f2799
  3. 06 2月, 2019 1 次提交
  5. 25 1月, 2019 2 次提交
  7. 19 9月, 2018 1 次提交
  9. 09 8月, 2018 1 次提交
    • J
      perf annotate: Add --percent-type option · 88c21190
      由 Jiri Olsa 提交于 
      Add --percent-type option to set annotation percent type from following
choices:

  global-period, local-period, global-hits, local-hits

Examples:

  $ perf annotate --percent-type period-local --stdio | head -1
   Percent         |      Source code ... es, percent: local period)
  $ perf annotate --percent-type hits-local --stdio | head -1
   Percent         |      Source code ... es, percent: local hits)
  $ perf annotate --percent-type hits-global --stdio | head -1
   Percent         |      Source code ... es, percent: global hits)
  $ perf annotate --percent-type period-global --stdio | head -1
   Percent         |      Source code ... es, percent: global period)

The local/global keywords set if the percentage is computed in the scope
of the function (local) or the whole data (global).

The period/hits keywords set the base the percentage is computed on -
the samples period or the number of samples (hits).
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-20-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      88c21190
  11. 25 6月, 2018 1 次提交
    • R
      perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE] · 92ead7ee
      由 Ravi Bangoria 提交于 
      perf_event__process_feature() accesses feat_ops[HEADER_LAST_FEATURE]
which is not defined and thus perf is crashing. HEADER_LAST_FEATURE is
used as an end marker for the perf report but it's unused for perf
script/annotate. Ignore HEADER_LAST_FEATURE for perf script/annotate,
just like it is done in 'perf report'.

Before:
  # perf record -o - ls | perf script
  <SNIP 'ls' output>
  Segmentation fault (core dumped)
  #

After:
  # perf record -o - ls | perf script
  <SNIP 'ls' output>
  Segmentation fault (core dumped)
  ls 7031 4392.099856:  250000 cpu-clock:uhH:  7f5e0ce7cd60
  ls 7031 4392.100355:  250000 cpu-clock:uhH:  7f5e0c706ef7
  #
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 57b5de46 ("perf report: Support forced leader feature in pipe mode")
Link: http://lkml.kernel.org/r/20180625124220.6434-4-ravi.bangoria@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      92ead7ee
  13. 04 6月, 2018 6 次提交
  15. 22 5月, 2018 1 次提交
    • J
      perf annotate: Support '--group' option · 7ebaf489
      由 Jin Yao 提交于 
      With the '--group' option, even for non-explicit group, 'perf annotate'
will enable the group output.

For example,

  $ perf record -e cycles,branches ./div
  $ perf annotate main --stdio --group

                 :            Disassembly of section .text:
                 :
                 :            00000000004004b0 <main>:
                 :            main():
                 :
                 :                    return i;
                 :            }
                 :
                 :            int main(void)
                 :            {
    0.00    0.00 :   4004b0:       push   %rbx
                 :                    int i;
                 :                    int flag;
                 :                    volatile double x = 1212121212, y = 121212;
                 :
                 :                    s_randseed = time(0);
    0.00    0.00 :   4004b1:       xor    %edi,%edi
                 :                    srand(s_randseed);
    0.00    0.00 :   4004b3:       mov    $0x77359400,%ebx
                 :
                 :                    return i;
                 :            }
                 :

But if without --group, there is only one event reported.

  $ perf annotate main --stdio

         :            Disassembly of section .text:
         :
         :            00000000004004b0 <main>:
         :            main():
         :
         :                    return i;
         :            }
         :
         :            int main(void)
         :            {
    0.00 :   4004b0:       push   %rbx
         :                    int i;
         :                    int flag;
         :                    volatile double x = 1212121212, y = 121212;
         :
         :                    s_randseed = time(0);
    0.00 :   4004b1:       xor    %edi,%edi
         :                    srand(s_randseed);
    0.00 :   4004b3:       mov    $0x77359400,%ebx
         :
         :                    return i;
         :            }
Signed-off-by: NJin Yao <yao.jin@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1526914666-31839-4-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7ebaf489
  17. 27 4月, 2018 1 次提交
    • A
      perf symbols: Unify symbol maps · 3183f8ca
      由 Arnaldo Carvalho de Melo 提交于 
      Remove the split of symbol tables for data (MAP__VARIABLE) and for
functions (MAP__FUNCTION), its unneeded and there were various places
doing two lookups to find a symbol, so simplify this.

We still will consider only the symbols that matched the filters in
place, i.e. see the (elf_(sec,sym)|symbol_type)__filter() routines in
the patch, just so that we consider only the same symbols as before,
to reduce the possibility of regressions.

All the tests on 50-something build environments, in varios versions
of lots of distros and cross build environments were performed without
build regressions, as usual with all pull requests the other tests were
also performed: 'perf test' and 'make -C tools/perf build-test'.

Also this was done at a great granularity so that regressions can be
bisected more easily.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hiq0fy2rsleupnqqwuojo1ne@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3183f8ca
  19. 21 3月, 2018 3 次提交
    • A
      perf annotate: Introduce --ignore-vmlinux command line option · be316409
      由 Arnaldo Carvalho de Melo 提交于 
      This is already present in 'perf top', albeit undocumented (will fix),
and is useful to use /proc/kcore instead of vmlinux and then get what is
really in place, not what the kernel starts with, before alternatives,
ftrace .text patching, etc, see the differences:

  # perf annotate --stdio2 _raw_spin_lock_irqsave
  _raw_spin_lock_irqsave() /lib/modules/4.16.0-rc4/build/vmlinux
  Event: anon group { cycles, instructions }

    0.00   3.17      → callq  __fentry__
    0.00   7.94        push   %rbx
    7.69  36.51      → callq  __page_file_index
                       mov    %rax,%rbx
    7.69   3.17      → callq  *ffffffff82225cd0
                       xor    %eax,%eax
                       mov    $0x1,%edx
   80.77  49.21        lock   cmpxchg %edx,(%rdi)
                       test   %eax,%eax
                     ↓ jne    2b
    3.85   0.00        mov    %rbx,%rax
                       pop    %rbx
                     ← retq
                 2b:   mov    %eax,%esi
                     → callq  queued_spin_lock_slowpath
                       mov    %rbx,%rax
                       pop    %rbx
                     ← retq
  [root@jouet ~]# perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave
  _raw_spin_lock_irqsave() /proc/kcore
  Event: anon group { cycles, instructions }

    0.00   3.17        nop
    0.00   7.94        push   %rbx
    0.00  23.81        pushfq
    7.69  12.70        pop    %rax
                       nop
                       mov    %rax,%rbx
    7.69   3.17        cli
                       nop
                       xor    %eax,%eax
                       mov    $0x1,%edx
   80.77  49.21        lock   cmpxchg %edx,(%rdi)
                       test   %eax,%eax
                     ↓ jne    2b
    3.85   0.00        mov    %rbx,%rax
                       pop    %rbx
                     ← retq
                 2b:   mov    %eax,%esi
                     → callq  *ffffffff820e96b0
                       mov    %rbx,%rax
                       pop    %rbx
                     ← retq
  #

Diff of the output of those commands:

  # perf annotate --stdio2 _raw_spin_lock_irqsave > /tmp/vmlinux
  # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave > /tmp/kcore
  # diff -y /tmp/vmlinux /tmp/kcore
  _raw_spin_lock_irqsave() vmlinux             | _raw_spin_lock_irqsave() /proc/kcore
  Event: anon group { cycles, instructions }     Event: anon group { cycles, instructions }

   0.00  3.17  → callq __fentry__              |  0.00  3.17     nop
   0.00  7.94    push  %rbx                       0.00  7.94     push  %rbx
   7.69 36.51  → callq __page_file_index       |  0.00 23.81     pushfq
                                               >  7.69 12.70     pop   %rax
                                               >                 nop
                 mov   %rax,%rbx                                 mov   %rax,%rbx
   7.69  3.17  → callq *ffffffff82225cd0       |  7.69  3.17     cli
                                               >                 nop
                 xor   %eax,%eax                                 xor   %eax,%eax
                 mov   $0x1,%edx                                 mov   $0x1,%edx
  80.77 49.21    lock  cmpxchg %edx,(%rdi)       80.77 49.21     lock  cmpxchg %edx,(%rdi)
                 test  %eax,%eax                                 test  %eax,%eax
               ↓ jne   2b                                      ↓ jne   2b
   3.85  0.00    mov   %rbx,%rax                  3.85  0.00     mov   %rbx,%rax
                 pop   %rbx                                      pop   %rbx
               ← retq                                          ← retq
            2b:  mov   %eax,%esi                            2b:  mov   %eax,%esi
               → callq queued_spin_lock_slowpath|              → callq *ffffffff820e96b0
                 mov   %rbx,%rax                                 mov   %rbx,%rax
                 pop   %rbx                                      pop   %rbx
               ← retq                                          ← retq
  #

This should be further streamlined by doing both annotations and
allowing the TUI to toggle initial/current, and show the patched
instructions in a slightly different color.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wz8d269hxkcwaczr0r4rhyjg@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      be316409
    • A
      perf annotate: Move the default annotate options to the library · 7f0b6fde
      由 Arnaldo Carvalho de Melo 提交于 
      One more thing that goes from the TUI code to be used more widely,
for instance it'll affect the default options used by:

  perf annotate --stdio2

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0nsz0dm0akdbo30vgja2a10e@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7f0b6fde
    • A
      perf annotate: Introduce the --stdio2 output mode · befd2a38
      由 Arnaldo Carvalho de Melo 提交于 
      This uses the TUI augmented formatting routines, modulo interactivity.

  # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave
  _raw_spin_lock_irqsave() /proc/kcore
  Event: cycles:ppp

  Percent

              Disassembly of section load0:

              ffffffff9a8734b0 <load0>:
                nop
                push   %rbx
   50.00        pushfq
                pop    %rax
                nop
                mov    %rax,%rbx
                cli
                nop
                xor    %eax,%eax
                mov    $0x1,%edx
   50.00        lock   cmpxchg %edx,(%rdi)
                test   %eax,%eax
              ↓ jne    2b
                mov    %rbx,%rax
                pop    %rbx
              ← retq
          2b:   mov    %eax,%esi
              → callq  queued_spin_lock_slowpath
                mov    %rbx,%rax
                pop    %rbx
              ← retq
Tested-by: NJin Yao <yao.jin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-6cte5o8z84mbivbvqlg14uh1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      befd2a38
  21. 08 3月, 2018 1 次提交
    • J
      perf annotate: Support to display the IPC/Cycle in TUI mode · bb848c14
      由 Jin Yao 提交于 
      Unlike the perf report interactive annotate mode, the perf annotate
doesn't display the IPC/Cycle even if branch info is recorded in perf
data file.

perf record -b ...
perf annotate function

It should show IPC/cycle, but it doesn't.

This patch lets perf annotate support the displaying of IPC/Cycle if
branch info is in perf data.

For example,

  perf annotate compute_flag

  Percent│ IPC Cycle
         │
         │
         │                Disassembly of section .text:
         │
         │                0000000000400640 <compute_flag>:
         │                compute_flag():
         │                volatile int count;
         │                static unsigned int s_randseed;
         │
         │                __attribute__((noinline))
         │                int compute_flag()
         │                {
   22.96 │1.18   584        sub    $0x8,%rsp
         │                        int i;
         │
         │                        i = rand() % 2;
   23.02 │1.18     1      → callq  rand@plt
         │
         │                        return i;
   27.05 │3.37              mov    %eax,%edx
         │                }
         │3.37              add    $0x8,%rsp
         │                {
         │                        int i;
         │
         │                        i = rand() % 2;
         │
         │                        return i;
         │3.37              shr    $0x1f,%edx
         │3.37              add    %edx,%eax
         │3.37              and    $0x1,%eax
         │3.37              sub    %edx,%eax
         │                }
   26.97 │3.37     2      ← retq

Note that, this patch only supports TUI mode. For stdio, now it just keeps
original behavior. Will support it in a follow-up patch.

  $ perf annotate compute_flag --stdio

   Percent |      Source code & Disassembly of div for cycles:ppp (7993 samples)
  ------------------------------------------------------------------------------
           :
           :
           :
           :            Disassembly of section .text:
           :
           :            0000000000400640 <compute_flag>:
           :            compute_flag():
           :            volatile int count;
           :            static unsigned int s_randseed;
           :
           :            __attribute__((noinline))
           :            int compute_flag()
           :            {
      0.29 :   400640:       sub    $0x8,%rsp     # +100.00%
           :                    int i;
           :
           :                    i = rand() % 2;
     42.93 :   400644:       callq  400490 <rand@plt>     # -100.00% (p:100.00%)
           :
           :                    return i;
      0.10 :   400649:       mov    %eax,%edx     # +100.00%
           :            }
      0.94 :   40064b:       add    $0x8,%rsp
           :            {
           :                    int i;
           :
           :                    i = rand() % 2;
           :
           :                    return i;
     27.02 :   40064f:       shr    $0x1f,%edx
      0.15 :   400652:       add    %edx,%eax
      1.24 :   400654:       and    $0x1,%eax
      2.08 :   400657:       sub    %edx,%eax
           :            }
     25.26 :   400659:       retq # -100.00% (p:100.00%)
Signed-off-by: NJin Yao <yao.jin@linux.intel.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20180223170210.GC7045@tassilo.jf.intel.com
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1519724327-7773-1-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      bb848c14
  23. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  25. 31 10月, 2017 2 次提交
  27. 18 8月, 2017 2 次提交
  29. 27 7月, 2017 1 次提交
  31. 25 7月, 2017 1 次提交
  33. 21 7月, 2017 2 次提交
  35. 19 7月, 2017 1 次提交
    • D
      perf tools: Add feature header record to pipe-mode · e9def1b2
      由 David Carrillo-Cisneros 提交于 
      Add header record types to pipe-mode, reusing the functions
used in file-mode and leveraging the new struct feat_fd.

For alignment, check that synthesized events don't exceed
pagesize.

Add the perf_event__synthesize_feature event call back to
process the new header records.

Before this patch:

  $ perf record -o - -e cycles sleep 1 | perf report --stdio --header
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  ...

After this patch:
  $ perf record -o - -e cycles sleep 1 | perf report --stdio --header
  # ========
  # captured on: Mon May 22 16:33:43 2017
  # ========
  #
  # hostname : my_hostname
  # os release : 4.11.0-dbx-up_perf
  # perf version : 4.11.rc6.g6277c80
  # arch : x86_64
  # nrcpus online : 72
  # nrcpus avail : 72
  # cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz
  # cpuid : GenuineIntel,6,63,2
  # total memory : 263457192 kB
  # cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1
  # HEADER_CPU_TOPOLOGY info available, use -I to display
  # HEADER_NUMA_TOPOLOGY info available, use -I to display
  # pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  ...

Support added for the subcommands: report, inject, annotate and script.
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e9def1b2
  37. 20 4月, 2017 1 次提交
  39. 12 4月, 2017 1 次提交
    • D
      perf annotate: Process attr and build_id records · 6ab11f3a
      由 David Carrillo-Cisneros 提交于 
      perf annotate did not get some love for pipe-mode, and did not have
.attr and .buil_id setup (while record and inject did. Fix that.

It can easily be reproduced by:

  perf record -o - noploop | perf annotate

that in my system shows:
    0xd8 [0x28]: failed to process type: 9

Committer Testing:

Before:

  $ perf record -o - stress -t 2 -c 2 | perf annotate --stdio
  stress: info: [11060] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
  0x4470 [0x28]: failed to process type: 9
  $ stress: info: [11060] successful run completed in 2s

  $

After:

  $ perf record -o - stress -t 2 -c 2 | perf annotate --stdio
  stress: info: [11871] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
  stress: info: [11871] successful run completed in 2s
  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  no symbols found in /usr/bin/stress, maybe install a debug package?
   Percent |      Source code & Disassembly of libc-2.24.so for cycles:uhH (6117 samples)
  ---------------------------------------------------------------------------------------
           :
           :      Disassembly of section .text:
           :
           :      000000000003b050 <random_r>:
           :      __random_r():
     10.56 :        3b050:       test   %rdi,%rdi
      0.00 :        3b053:       je     3b0d0 <random_r+0x80>
      0.34 :        3b055:       test   %rsi,%rsi
      0.00 :        3b058:       je     3b0d0 <random_r+0x80>
      0.46 :        3b05a:       mov    0x18(%rdi),%eax
     12.44 :        3b05d:       mov    0x10(%rdi),%r8
      0.18 :        3b061:       test   %eax,%eax
      0.00 :        3b063:       je     3b0b0 <random_r+0x60>
<SNIP>
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170410201432.24807-5-davidcc@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      6ab11f3a
  41. 27 3月, 2017 1 次提交
  43. 14 3月, 2017 1 次提交
    • H
      perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info · f3b3614a
      由 Hari Bathini 提交于 
      Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.

Committer notes:

Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.

Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:

  util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
     ret  += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
                                         ^
Testing it:

  # perf record --namespaces -a
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
  #
  # perf report -D
  <SNIP>
  3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
                [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
                 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]

  0x1151e0 [0x30]: event: 9
  .
  . ... raw event: size 48 bytes
  .  0000:  09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00  ......0..q.h....
  .  0010:  a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00  .9...9...(.c....
  .  0020:  03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00  ................
  <SNIP>
        NAMESPACES events:          1
  <SNIP>
  #
Signed-off-by: NHari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f3b3614a
  45. 20 2月, 2017 1 次提交
  47. 09 9月, 2016 1 次提交
    • P
      perf annotate: Add branch stack / basic block · 70fbe057
      由 Peter Zijlstra 提交于 
      I wanted to know the hottest path through a function and figured the
branch-stack (LBR) information should be able to help out with that.

The below uses the branch-stack to create basic blocks and generate
statistics from them.

        from    to              branch_i
        * ----> *
                |
                | block
                v
                * ----> *
                from    to      branch_i+1

The blocks are broken down into non-overlapping ranges, while tracking
if the start of each range is an entry point and/or the end of a range
is a branch.

Each block iterates all ranges it covers (while splitting where required
to exactly match the block) and increments the 'coverage' count.

For the range including the branch we increment the taken counter, as
well as the pred counter if flags.predicted.

Using these number we can find if an instruction:

 - had coverage; given by:

        br->coverage / br->sym->max_coverage

   This metric ensures each symbol has a 100% spot, which reflects the
   observation that each symbol must have a most covered/hottest
   block.

 - is a branch target: br->is_target && br->start == add

 - for targets, how much of a branch's coverages comes from it:

	target->entry / branch->coverage

 - is a branch: br->is_branch && br->end == addr

 - for branches, how often it was taken:

        br->taken / br->coverage

   after all, all execution that didn't take the branch would have
   incremented the coverage and continued onward to a later branch.

 - for branches, how often it was predicted:

        br->pred / br->taken

The coverage percentage is used to color the address and asm sections;
for low (<1%) coverage we use NORMAL (uncolored), indicating that these
instructions are not 'important'. For high coverage (>75%) we color the
address RED.

For each branch, we add an asm comment after the instruction with
information on how often it was taken and predicted.

Output looks like (sans color, which does loose a lot of the
information :/)

$ perf record --branch-filter u,any -e cycles:p ./branches 27
$ perf annotate branches

 Percent |	Source code & Disassembly of branches for cycles:pu (217 samples)
---------------------------------------------------------------------------------
         :	branches():
    0.00 :	  40057a:       push   %rbp
    0.00 :	  40057b:       mov    %rsp,%rbp
    0.00 :	  40057e:       sub    $0x20,%rsp
    0.00 :	  400582:       mov    %rdi,-0x18(%rbp)
    0.00 :	  400586:       mov    %rsi,-0x20(%rbp)
    0.00 :	  40058a:       mov    -0x18(%rbp),%rax
    0.00 :	  40058e:       mov    %rax,-0x10(%rbp)
    0.00 :	  400592:       movq   $0x0,-0x8(%rbp)
    0.00 :	  40059a:       jmpq   400656 <branches+0xdc>
    1.84 :	  40059f:       mov    -0x10(%rbp),%rax	# +100.00%
    3.23 :	  4005a3:       and    $0x1,%eax
    1.84 :	  4005a6:       test   %rax,%rax
    0.00 :	  4005a9:       je     4005bf <branches+0x45>	# -54.50% (p:42.00%)
    0.46 :	  4005ab:       mov    0x200bbe(%rip),%rax        # 601170 <acc>
   12.90 :	  4005b2:       add    $0x1,%rax
    2.30 :	  4005b6:       mov    %rax,0x200bb3(%rip)        # 601170 <acc>
    0.46 :	  4005bd:       jmp    4005d1 <branches+0x57>	# -100.00% (p:100.00%)
    0.92 :	  4005bf:       mov    0x200baa(%rip),%rax        # 601170 <acc>	# +49.54%
   13.82 :	  4005c6:       sub    $0x1,%rax
    0.46 :	  4005ca:       mov    %rax,0x200b9f(%rip)        # 601170 <acc>
    2.30 :	  4005d1:       mov    -0x10(%rbp),%rax	# +50.46%
    0.46 :	  4005d5:       mov    %rax,%rdi
    0.46 :	  4005d8:       callq  400526 <lfsr>	# -100.00% (p:100.00%)
    0.00 :	  4005dd:       mov    %rax,-0x10(%rbp)	# +100.00%
    0.92 :	  4005e1:       mov    -0x18(%rbp),%rax
    0.00 :	  4005e5:       and    $0x1,%eax
    0.00 :	  4005e8:       test   %rax,%rax
    0.00 :	  4005eb:       je     4005ff <branches+0x85>	# -100.00% (p:100.00%)
    0.00 :	  4005ed:       mov    0x200b7c(%rip),%rax        # 601170 <acc>
    0.00 :	  4005f4:       shr    $0x2,%rax
    0.00 :	  4005f8:       mov    %rax,0x200b71(%rip)        # 601170 <acc>
    0.00 :	  4005ff:       mov    -0x10(%rbp),%rax	# +100.00%
    7.37 :	  400603:       and    $0x1,%eax
    3.69 :	  400606:       test   %rax,%rax
    0.00 :	  400609:       jne    400612 <branches+0x98>	# -59.25% (p:42.99%)
    1.84 :	  40060b:       mov    $0x1,%eax
   14.29 :	  400610:       jmp    400617 <branches+0x9d>	# -100.00% (p:100.00%)
    1.38 :	  400612:       mov    $0x0,%eax	# +57.65%
   10.14 :	  400617:       test   %al,%al	# +42.35%
    0.00 :	  400619:       je     40062f <branches+0xb5>	# -57.65% (p:100.00%)
    0.46 :	  40061b:       mov    0x200b4e(%rip),%rax        # 601170 <acc>
    2.76 :	  400622:       sub    $0x1,%rax
    0.00 :	  400626:       mov    %rax,0x200b43(%rip)        # 601170 <acc>
    0.46 :	  40062d:       jmp    400641 <branches+0xc7>	# -100.00% (p:100.00%)
    0.92 :	  40062f:       mov    0x200b3a(%rip),%rax        # 601170 <acc>	# +56.13%
    2.30 :	  400636:       add    $0x1,%rax
    0.92 :	  40063a:       mov    %rax,0x200b2f(%rip)        # 601170 <acc>
    0.92 :	  400641:       mov    -0x10(%rbp),%rax	# +43.87%
    2.30 :	  400645:       mov    %rax,%rdi
    0.00 :	  400648:       callq  400526 <lfsr>	# -100.00% (p:100.00%)
    0.00 :	  40064d:       mov    %rax,-0x10(%rbp)	# +100.00%
    1.84 :	  400651:       addq   $0x1,-0x8(%rbp)
    0.92 :	  400656:       mov    -0x8(%rbp),%rax
    5.07 :	  40065a:       cmp    -0x20(%rbp),%rax
    0.00 :	  40065e:       jb     40059f <branches+0x25>	# -100.00% (p:100.00%)
    0.00 :	  400664:       nop
    0.00 :	  400665:       leaveq
    0.00 :	  400666:       retq

(Note: the --branch-filter u,any was used to avoid spurious target and
branch points due to interrupts/faults, they show up as very small -/+
annotations on 'weird' locations)

Committer note:

Please take a look at:

  http://vger.kernel.org/~acme/perf/annotate_basic_blocks.png

To see the colors.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
[ Moved sym->max_coverage to 'struct annotate', aka symbol__annotate(sym) ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      70fbe057
  49. 30 8月, 2016 1 次提交
  51. 12 7月, 2016 1 次提交
  53. 23 6月, 2016 1 次提交
  55. 22 6月, 2016 1 次提交
  57. 20 5月, 2016 1 次提交