Some method to deal with rt-mutexes and make sched_dl interact with
the current PI-coded is needed, raising all but trivial issues, that
needs (according to us) to be solved with some restructuring of
the pi-code (i.e., going toward a proxy execution-ish implementation).

This is under development, in the meanwhile, as a temporary solution,
what this commits does is:

 - ensure a pi-lock owner with waiters is never throttled down. Instead,
   when it runs out of runtime, it immediately gets replenished and it's
   deadline is postponed;

 - the scheduling parameters (relative deadline and default runtime)
   used for that replenishments --during the whole period it holds the
   pi-lock-- are the ones of the waiting task with earliest deadline.

Acting this way, we provide some kind of boosting to the lock-owner,
still by using the existing (actually, slightly modified by the previous
commit) pi-architecture.

We would stress the fact that this is only a surely needed, all but
clean solution to the problem. In the end it's only a way to re-start
discussion within the community. So, as always, comments, ideas, rants,
etc.. are welcome! :-)
Signed-off-by: NDario Faggioli <raistlin@linux.it>
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
[ Added !RT_MUTEXES build fix. ]
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-11-git-send-email-juri.lelli@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Turn the pi-chains from plist to rb-tree, in the rt_mutex code,
and provide a proper comparison function for -deadline and
-priority tasks.

This is done mainly because:
 - classical prio field of the plist is just an int, which might
   not be enough for representing a deadline;
 - manipulating such a list would become O(nr_deadline_tasks),
   which might be to much, as the number of -deadline task increases.

Therefore, an rb-tree is used, and tasks are queued in it according
to the following logic:
 - among two -priority (i.e., SCHED_BATCH/OTHER/RR/FIFO) tasks, the
   one with the higher (lower, actually!) prio wins;
 - among a -priority and a -deadline task, the latter always wins;
 - among two -deadline tasks, the one with the earliest deadline
   wins.

Queueing and dequeueing functions are changed accordingly, for both
the list of a task's pi-waiters and the list of tasks blocked on
a pi-lock.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NDario Faggioli <raistlin@linux.it>
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-again-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-10-git-send-email-juri.lelli@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

It is very likely that systems that wants/needs to use the new
SCHED_DEADLINE policy also want to have the scheduling latency of
the -deadline tasks under control.

For this reason a new version of the scheduling wakeup latency,
called "wakeup_dl", is introduced.

As a consequence of applying this patch there will be three wakeup
latency tracer:

 * "wakeup", that deals with all tasks in the system;
 * "wakeup_rt", that deals with -rt and -deadline tasks only;
 * "wakeup_dl", that deals with -deadline tasks only.
Signed-off-by: NDario Faggioli <raistlin@linux.it>
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-9-git-send-email-juri.lelli@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Make it possible to specify a period (different or equal than
deadline) for -deadline tasks. Relative deadlines (D_i) are used on
task arrivals to generate new scheduling (absolute) deadlines as "d =
t + D_i", and periods (P_i) to postpone the scheduling deadlines as "d
= d + P_i" when the budget is zero.

This is in general useful to model (and schedule) tasks that have slow
activation rates (long periods), but have to be scheduled soon once
activated (short deadlines).
Signed-off-by: NHarald Gustafsson <harald.gustafsson@ericsson.com>
Signed-off-by: NDario Faggioli <raistlin@linux.it>
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-7-git-send-email-juri.lelli@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Make the core scheduler and load balancer aware of the load
produced by -deadline tasks, by updating the moving average
like for sched_rt.
Signed-off-by: NDario Faggioli <raistlin@linux.it>
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-6-git-send-email-juri.lelli@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Introduces data structures relevant for implementing dynamic
migration of -deadline tasks and the logic for checking if
runqueues are overloaded with -deadline tasks and for choosing
where a task should migrate, when it is the case.

Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can
be moved among CPUs when necessary. It is also possible to bind a
task to a (set of) CPU(s), thus restricting its capability of
migrating, or forbidding migrations at all.

The very same approach used in sched_rt is utilised:
 - -deadline tasks are kept into CPU-specific runqueues,
 - -deadline tasks are migrated among runqueues to achieve the
   following:
    * on an M-CPU system the M earliest deadline ready tasks
      are always running;
    * affinity/cpusets settings of all the -deadline tasks is
      always respected.

Therefore, this very special form of "load balancing" is done with
an active method, i.e., the scheduler pushes or pulls tasks between
runqueues when they are woken up and/or (de)scheduled.
IOW, every time a preemption occurs, the descheduled task might be sent
to some other CPU (depending on its deadline) to continue executing
(push). On the other hand, every time a CPU becomes idle, it might pull
the second earliest deadline ready task from some other CPU.

To enforce this, a pull operation is always attempted before taking any
scheduling decision (pre_schedule()), as well as a push one after each
scheduling decision (post_schedule()). In addition, when a task arrives
or wakes up, the best CPU where to resume it is selected taking into
account its affinity mask, the system topology, but also its deadline.
E.g., from the scheduling point of view, the best CPU where to wake
up (and also where to push) a task is the one which is running the task
with the latest deadline among the M executing ones.

In order to facilitate these decisions, per-runqueue "caching" of the
deadlines of the currently running and of the first ready task is used.
Queued but not running tasks are also parked in another rb-tree to
speed-up pushes.
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-by: NDario Faggioli <raistlin@linux.it>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.

Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.

Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.

The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.

The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.

To summarize, this patch:
 - introduces the data structures, constants and symbols needed;
 - implements the core logic of the scheduling algorithm in the new
   scheduling class file;
 - provides all the glue code between the new scheduling class and
   the core scheduler and refines the interactions between sched/dl
   and the other existing scheduling classes.
Signed-off-by: NDario Faggioli <raistlin@linux.it>
Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: NFabio Checconi <fchecconi@gmail.com>
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add the syscalls needed for supporting scheduling algorithms
with extended scheduling parameters (e.g., SCHED_DEADLINE).

In general, it makes possible to specify a periodic/sporadic task,
that executes for a given amount of runtime at each instance, and is
scheduled according to the urgency of their own timing constraints,
i.e.:

 - a (maximum/typical) instance execution time,
 - a minimum interval between consecutive instances,
 - a time constraint by which each instance must be completed.

Thus, both the data structure that holds the scheduling parameters of
the tasks and the system calls dealing with it must be extended.
Unfortunately, modifying the existing struct sched_param would break
the ABI and result in potentially serious compatibility issues with
legacy binaries.

For these reasons, this patch:

 - defines the new struct sched_attr, containing all the fields
   that are necessary for specifying a task in the computational
   model described above;

 - defines and implements the new scheduling related syscalls that
   manipulate it, i.e., sched_setattr() and sched_getattr().

Syscalls are introduced for x86 (32 and 64 bits) and ARM only, as a
proof of concept and for developing and testing purposes. Making them
available on other architectures is straightforward.

Since no "user" for these new parameters is introduced in this patch,
the implementation of the new system calls is just identical to their
already existing counterpart. Future patches that implement scheduling
policies able to exploit the new data structure must also take care of
modifying the sched_*attr() calls accordingly with their own purposes.
Signed-off-by: NDario Faggioli <raistlin@linux.it>
[ Rewrote to use sched_attr. ]
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
[ Removed sched_setscheduler2() for now. ]
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-3-git-send-email-juri.lelli@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pick up the latest fixes before applying new changes.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Thomas Hellstrom bisected a regression where erratic 3D performance is
experienced on virtual machines as measured by glxgears. It identified
commit 58d081b5 ("sched/numa: Avoid overloading CPUs on a preferred NUMA
node") as the problem which had modified the behaviour of effective_load.

Effective load calculates the difference to the system-wide load if a
scheduling entity was moved to another CPU. The task group is not heavier
as a result of the move but overall system load can increase/decrease as a
result of the change. Commit 58d081b5 ("sched/numa: Avoid overloading CPUs
on a preferred NUMA node") changed effective_load to make it suitable for
calculating if a particular NUMA node was compute overloaded. To reduce
the cost of the function, it assumed that a current sched entity weight
of 0 was uninteresting but that is not the case.

wake_affine() uses a weight of 0 for sync wakeups on the grounds that it
is assuming the waking task will sleep and not contribute to load in the
near future. In this case, we still want to calculate the effective load
of the sched entity hierarchy. As effective_load is no longer used by
task_numa_compare since commit fb13c7ee (sched/numa: Use a system-wide
search to find swap/migration candidates), this patch simply restores the
historical behaviour.
Reported-and-tested-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NRik van Riel <riel@redhat.com>
[ Wrote changelog]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140106113912.GC6178@suse.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull networking fixes from David Miller:
 "Famouse last words: "final pull request" :-)

  I'm sending this because Jason Wang's fixes are pretty important

   1) Add missing per-cpu stats initialization to ip6_vti.  Otherwise
      lockdep spits out a call trace.  From Li RongQing.

   2) Fix NULL oops in wireless hwsim, from Javier Lopez

   3) TIPC deferred packet queue unlink must NULL out skb->next to avoid
      crashes.  From Erik Hugne

   4) Fix access to uninitialized buffer in nf_nat netfilter code, from
      Daniel Borkmann

   5) Fix lifetime of ipv6 loopback and SIT tunnel addresses, otherwise
      they basically timeout immediately.  From Hannes Frederic Sowa

   6) Fix DMA unmapping of TSO packets in bnx2x driver, from Michal
      Schmidt

   7) Do not allow L2 forwarding offload via macvtap device, the way
      things are now it will not end up being forwaded at all.  From
      Jason Wang

   8) Fix transmit queue selection via ndo_dfwd_start_xmit(), fixing
      things like applying NETIF_F_LLTX to the wrong device (!!) and
      eliding the proper transmit watchdog handling

   9) qlcnic driver was not updating tx statistics at all, from Manish
      Chopra"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  qlcnic: Fix ethtool statistics length calculation
  qlcnic: Fix bug in TX statistics
  net: core: explicitly select a txq before doing l2 forwarding
  macvlan: forbid L2 fowarding offload for macvtap
  bnx2x: fix DMA unmapping of TSO split BDs
  ipv6: add link-local, sit and loopback address with INFINITY_LIFE_TIME
  bnx2x: prevent WARN during driver unload
  tipc: correctly unlink packets from deferred packet queue
  ipv6: pcpu_tstats.syncp should be initialised in ip6_vti.c
  netfilter: only warn once on wrong seqadj usage
  netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper
  NFC: Fix target mode p2p link establishment
  iwlwifi: add new devices for 7265 series
  mac80211: move "bufferable MMPDU" check to fix AP mode scan
  mac80211_hwsim: Fix NULL pointer dereference

Pull xfs bugfixes from Ben Myers:
 "Here we have a bugfix for an off-by-one in the remote attribute
  verifier that results in a forced shutdown which you can hit with v5
  superblock by creating a 64k xattr, and a fix for a missing
  destroy_work_on_stack() in the allocation worker.

  It's a bit late, but they are both fairly straightforward"

* tag 'xfs-for-linus-v3.13-rc8' of git://oss.sgi.com/xfs/xfs:
  xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
  xfs: fix off-by-one error in xfs_attr3_rmt_verify

Merge branch 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED fix from Bryan Wu:
 "Pali Rohár and Pavel Machek reported the LED of Nokia N900 doesn't
  work with our latest 3.13-rc6 kernel.  Milo fixed the regression here"

* 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: lp5521/5523: Remove duplicate mutex

Pull ACPI and power management fixes from Rafael Wysocki:

 - Recent commits modifying the lists of C-states in the intel_idle
   driver introduced bugs leading to crashes on some systems.  Two fixes
   from Jiang Liu.

 - The ACPI AC driver should receive all types of notifications, but
   recent change made it ignore some of them.  Fix from Alexander Mezin.

 - intel_pstate's validity checks for MSRs it depends on are not
   sufficient to catch the lack of support in nested KVM setups, so they
   are extended to cover that case.  From Dirk Brandewie.

 - NEC LZ750/LS has a botched up _BIX method in its ACPI tables, so our
   ACPI battery driver needs a quirk for it.  From Lan Tianyu.

 - The tpm_ppi driver sometimes leaks memory allocated by
   acpi_get_name().  Fix from Jiang Liu.

* tag 'pm+acpi-3.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: close avn_cstates array with correct marker
  Revert "intel_idle: mark states tables with __initdata tag"
  ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS
  intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters.
  ACPI / TPM: fix memory leak when walking ACPI namespace
  ACPI / AC: change notification handler type to ACPI_ALL_NOTIFY

Pull MFD fix from Samuel Ortiz:
 "This is the 2nd MFD pull request for 3.13

  It only contains one fix for the rtsx_pcr driver.  Without it we see a
  kernel panic on some machines, when resuming from suspend to RAM"

* tag 'mfd-fixes-3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
  mfd: rtsx_pcr: Disable interrupts before cancelling delayed works

It can be a problem when a pattern is loaded via the firmware interface.
LP55xx common driver has already locked the mutex in 'lp55xx_firmware_loaded()'.
So it should be deleted.

On the other hand, locks are required in store_engine_load()
on updating program memory.
Reported-by: NPali Rohár <pali.rohar@gmail.com>
Reported-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NMilo Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>
Cc: <stable@vger.kernel.org>

In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to
call destroy_work_on_stack() which frees the debug object to pair
with INIT_WORK_ONSTACK().
Signed-off-by: NLiu, Chuansheng <chuansheng.liu@intel.com>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit 6f96b306)

With CRC check is enabled, if trying to set an attributes value just
equal to the maximum size of XATTR_SIZE_MAX would cause the v3 remote
attr write verification procedure failure, which would yield the back
trace like below:

<snip>
XFS (sda7): Internal error xfs_attr3_rmt_write_verify at line 191 of file fs/xfs/xfs_attr_remote.c
<snip>
Call Trace:
[<ffffffff816f0042>] dump_stack+0x45/0x56
[<ffffffffa0d99c8b>] xfs_error_report+0x3b/0x40 [xfs]
[<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffffa0d99ce5>] xfs_corruption_error+0x55/0x80 [xfs]
[<ffffffffa0dbef6b>] xfs_attr3_rmt_write_verify+0x14b/0x1a0 [xfs]
[<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d96edd>] _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffff81184cda>] ? vm_map_ram+0x31a/0x460
[<ffffffff81097230>] ? wake_up_state+0x20/0x20
[<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d9726b>] xfs_buf_iorequest+0x6b/0xc0 [xfs]
[<ffffffffa0d97315>] xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d97906>] xfs_bwrite+0x46/0x80 [xfs]
[<ffffffffa0dbfa94>] xfs_attr_rmtval_set+0x334/0x490 [xfs]
[<ffffffffa0db84aa>] xfs_attr_leaf_addname+0x24a/0x410 [xfs]
[<ffffffffa0db8893>] xfs_attr_set_int+0x223/0x470 [xfs]
[<ffffffffa0db8b76>] xfs_attr_set+0x96/0xb0 [xfs]
[<ffffffffa0db13b2>] xfs_xattr_set+0x42/0x70 [xfs]
[<ffffffff811df9b2>] generic_setxattr+0x62/0x80
[<ffffffff811e0213>] __vfs_setxattr_noperm+0x63/0x1b0
[<ffffffff81307afe>] ? evm_inode_setxattr+0xe/0x10
[<ffffffff811e0415>] vfs_setxattr+0xb5/0xc0
[<ffffffff811e054e>] setxattr+0x12e/0x1c0
[<ffffffff811c6e82>] ? final_putname+0x22/0x50
[<ffffffff811c708b>] ? putname+0x2b/0x40
[<ffffffff811cc4bf>] ? user_path_at_empty+0x5f/0x90
[<ffffffff811bdfd9>] ? __sb_start_write+0x49/0xe0
[<ffffffff81168589>] ? vm_mmap_pgoff+0x99/0xc0
[<ffffffff811e07df>] SyS_setxattr+0x8f/0xe0
[<ffffffff81700c2d>] system_call_fastpath+0x1a/0x1f

Tests:
    setfattr -n user.longxattr -v `perl -e 'print "A"x65536'` testfile

This patch fix it to check the remote EA size is greater than the
XATTR_SIZE_MAX rather than more than or equal to it, because it's
valid if the specified EA value size is equal to the limitation as
per VFS setxattr interface.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit 85dd0707)

o Consider number of Tx queues while calculating the length of
  Tx statistics as part of ethtool stats.
o Calculate statistics lenght properly for 82xx and 83xx adapter
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Driver was not updating TX stats so it was not populating
  statistics in `ifconfig` command output.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The
will cause several issues:

- NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan
  instead of lower device which misses the necessary txq synchronization for
  lower device such as txq stopping or frozen required by dev watchdog or
  control path.
- dev_hard_start_xmit() was called with NULL txq which bypasses the net device
  watchdog.
- dev_hard_start_xmit() does not check txq everywhere which will lead a crash
  when tso is disabled for lower device.

Fix this by explicitly introducing a new param for .ndo_select_queue() for just
selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also
extended to accept this parameter and dev_queue_xmit_accel() was used to do l2
forwarding transmission.

With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need
to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep
a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of
dev_queue_xmit() to do the transmission.

In the future, it was also required for macvtap l2 forwarding support since it
provides a necessary synchronization method.

Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: e1000-devel@lists.sourceforge.net
Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NJohn Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

L2 fowarding offload will bypass the rx handler of real device. This will make
the packet could not be forwarded to macvtap device. Another problem is the
dev_hard_start_xmit() called for macvtap does not have any synchronization.

Fix this by forbidding L2 forwarding for macvtap.

Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NJohn Fastabend <john.r.fastabend@intel.com.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John W. Linville says:

====================
For the mac80211 bits, Johannes says:

"I have a fix from Javier for mac80211_hwsim when used with wmediumd
userspace, and a fix from Felix for buffering in AP mode."

For the NFC bits, Samuel says:

"This pull request only contains one fix for a regression introduced with
commit e29a9e2a. Without this fix, we can not establish a p2p link
in target mode. Only initiator mode works."

For the iwlwifi bits, Emmanuel says:

"It only includes new device IDs so it's not vital. If you have a pull
request to net.git anyway, I'd happy to have this in."
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bnx2x triggers warnings with CONFIG_DMA_API_DEBUG=y:

  WARNING: CPU: 0 PID: 2253 at lib/dma-debug.c:887 check_unmap+0xf8/0x920()
  bnx2x 0000:28:00.0: DMA-API: device driver frees DMA memory with
  different size [device address=0x00000000da2b389e] [map size=1490 bytes]
  [unmap size=66 bytes]

The reason is that bnx2x splits a TSO BD into two BDs (headers + data)
using one DMA mapping for both, but it uses only the length of the first
BD when unmapping.

This patch fixes the bug by unmapping the whole length of the two BDs.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Acked-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull clock fixes from Mike Turquette:
 "Late fixes for clock drivers.  All of these fixes are for user-visible
  regressions, typically boot failures or other unsafe system
  configuration that causes badness"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: clk-divider: fix divisor > 255 bug
  clk: exynos: File scope reg_save array should depend on PM_SLEEP
  clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock
  ARM: dts: exynos5250: Fix MDMA0 clock number
  clk: samsung: exynos5250: Add MDMA0 clocks
  clk: samsung: exynos5250: Fix ACP gate register offset
  clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks
  clk: samsung: exynos4: Correct SRC_MFC register

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes for Renesas platforms to fixup DMA masks (this started
  causing errors once the DMA API added checks for valid masks in 3.13)"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: shmobile: mackerel: Fix coherent DMA mask
  ARM: shmobile: kzm9g: Fix coherent DMA mask
  ARM: shmobile: armadillo: Fix coherent DMA mask

In the past the IFA_PERMANENT flag indicated, that the valid and preferred
lifetime where ignored. Since change fad8da3e ("ipv6 addrconf: fix
preferred lifetime state-changing behavior while valid_lft is infinity")
we honour at least the preferred lifetime on those addresses. As such
the valid lifetime gets recalculated and updated to 0.

If loopback address is added manually this problem does not occur.
Also if NetworkManager manages IPv6, those addresses will get added via
inet6_rtm_newaddr and thus will have a correct lifetime, too.
Reported-by: NFrançois-Xavier Le Bail <fx.lebail@yahoo.com>
Reported-by: NDamien Wyart <damien.wyart@gmail.com>
Fixes: fad8da3e ("ipv6 addrconf: fix preferred lifetime state-changing behavior while valid_lft is infinity")
Cc: Yasushi Asano <yasushi.asano@jp.fujitsu.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Starting with commit 80c33ddd "net: add might_sleep() call to napi_disable"
bnx2x fails the might_sleep tests causing a stack trace to appear whenever
the driver is unloaded, as local_bh_disable() is being called before
napi_disable().

This changes the locking schematics related to CONFIG_NET_RX_BUSY_POLL,
preventing the need for calling local_bh_disable() and thus eliminating
the issue.
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* pm-cpuidle:
  intel_idle: close avn_cstates array with correct marker
  Revert "intel_idle: mark states tables with __initdata tag"

Close avn_cstates array with correct marker to avoid overflow
in function intel_idle_cpu_init().

[rjw: The problem was introduced when commit 22e580d0 was merged
 on top of eba682a5 (intel_idle: shrink states tables).]

Fixes: 22e580d0 (intel_idle: Fixed C6 state on Avoton/Rangeley processors)
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

This reverts commit 9d046ccb.

Commit 9d046ccb marks all state tables with __initdata, but
the state table may be accessed when doing CPU online, which then
causing system crash as below:

[  204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8
[  204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130
[  204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062
[  204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[  204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio
[  204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48
[  204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013
[  204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000
[  204.290311] RIP: 0010:[<ffffffff814aa1c0>]  [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130
[  204.300184] RSP: 0018:ffff880440fadd28  EFLAGS: 00010286
[  204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007
[  204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120
[  204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001
[  204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e
[  204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000
[  204.346743] FS:  00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000
[  204.355919] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0
[  204.370520] Stack:
[  204.372853]  000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307
[  204.381519]  ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000
[  204.390196]  000000000000001e 0000000000000002 0000000000000002 0000000000000000
[  204.398856] Call Trace:
[  204.401683]  [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70
[  204.408638]  [<ffffffff8185a230>] notifier_call_chain+0x100/0x150
[  204.415553]  [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10
[  204.422772]  [<ffffffff81072163>] cpu_notify+0x23/0x50
[  204.428616]  [<ffffffff810723b2>] _cpu_up+0x132/0x1a0
[  204.434361]  [<ffffffff8107249d>] cpu_up+0x7d/0xa0
[  204.439819]  [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90
[  204.446345]  [<ffffffff81554625>] device_online+0x45/0xa0
[  204.452471]  [<ffffffff815546ce>] online_store+0x4e/0x80
[  204.458511]  [<ffffffff815519a8>] dev_attr_store+0x18/0x30
[  204.464744]  [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0
[  204.471681]  [<ffffffff81217ef1>] vfs_write+0xe1/0x160
[  204.477524]  [<ffffffff8121889c>] SyS_write+0x4c/0x90
[  204.483270]  [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f
[  204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79
[  204.515723] RIP  [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130
[  204.522996]  RSP <ffff880440fadd28>
[  204.526976] CR2: ffffffff8227cce8
[  204.530766] ---[ end trace 336f56cc3d1cfc8c ]---

Fixes: 9d046ccb (intel_idle: mark states tables with __initdata tag)
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull parisc fix from Helge Deller:
 "This patch fixes the kmap/kunmap implementation on parisc and finally
  makes AIO work on parisc"

* 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Ensure full cache coherency for kmap/kunmap

Pull libata fixes from Tejun Heo:
 "Late fixes for libata.  Nothing too interesting.  Adding missing PM
  callbacks to satat_sis and an additional PCI ID for ahci"

* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  sata_sis: missing PM support
  ahci: add PCI ID for Marvell 88SE9170 SATA controller

Helge Deller noted a few weeks ago problems with the AIO support on
parisc. This change is the result of numerous iterations on how best to
deal with this problem.

The solution adopted here is to provide full cache coherency in a
uniform manner on all parisc systems. This involves calling
flush_dcache_page() on kmap operations and flush_kernel_dcache_page() on
kunmap operations. As a result, the copy_user_page() and
clear_user_page() functions can be removed and the overall code is
simpler.

The change ensures that both userspace and kernel aliases to a mapped
page are invalidated and flushed. This is necessary for the correct
operation of PA8800 and PA8900 based systems which do not support
inequivalent aliases.

With this change, I have observed no cache related issues on c8000 and
rp3440. It is now possible for example to do kernel builds with "-j64"
on four way systems.

On systems using XFS file systems, the patch recently posted by Mikulas
Patocka to "fix crash using XFS on loopback" is needed to avoid a hang
caused by an uninitialized lock passed to flush_dcache_page() in the
page struct.
Signed-off-by: NJohn David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: NHelge Deller <deller@gmx.de>

Samuel Ortiz <sameo@linux.intel.com> says:

"This is the first NFC fixes pull request for 3.13.

It only contains one fix for a regression introduced with commit
e29a9e2a. Without this fix, we can not establish a p2p link in
target mode. Only initiator mode works."
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Commit 6d9252bd (clk: Add support for power of two type dividers)
merged in v3.6 added the _get_val function to convert a divisor value to
a register field value depending on the flags. However it used the type
u8 for the div field, causing divisors larger than 255 to be masked
and the resultant clock rate to be too high.

E.g. in my case an 11bit divider was supposed to divide 24.576 MHz down
to 32.768KHz. The divisor was correctly calculated as 750 (0x2ee). This
was masked to 238 (0xee) resulting in a frequency of 103.26KHz.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: NMike Turquette <mturquette@linaro.org>

misc fixes for nouveau, one more msi rearm, regression fix for old bioses
crash and leak fixes.

* 'drm-nouveau-next' of git://anongit.freedesktop.org/nouveau/linux-2.6:
  drm/nouveau/nouveau: fix memory leak in nouveau_crtc_page_flip()
  drm/nouveau/bios: fix offset calculation for BMPv1 bioses
  drm/nouveau: return offset of allocated notifier
  drm/nouveau/bios: make jump conditional
  drm/nvce/mc: fix msi rearm on GF114
  drm/nvc0/gr: fix mthd data submission
  drm/nouveau: populate master subdev pointer only when fully constructed

Merge tag 'drm-intel-fixes-2014-01-08' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

Just a revert (gen4 backlight seems a lost cause) and a tlb coherency fix
for bdw, plus the patch to sign up Jani for co-maintainer. Thanks to Ben
for taking care of -fixes while I've enjoyed a bit of vacation.

* tag 'drm-intel-fixes-2014-01-08' of git://people.freedesktop.org/~danvet/drm-intel:
  MAINTAINERS: Updates for drm/i915
  Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM"
  drm/i915/bdw: Flush system agent on gen8 also

Fix a memory leak in the nouveau_crtc_page_flip() error handling path.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>