Merge branches 'x86-fixes-for-linus' and 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, alternative: Call stop_machine_text_poke() on all cpus
  x86-32: Restore irq stacks NUMA-aware allocations
  x86, memblock: Fix early_node_mem with big reserved region.

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, uv: More Westmere support on SGI UV
  x86, uv: Enable Westmere support on SGI UV

* 'msm-fixes' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  msm: Kconfig: drop unused config options
  msm: fix compile failure when no debug uart is selected
  msm: fix debug-macro.S build failure
  msm: timer: Decrease shift on timer clocksource
  arm: mach-msm: fix error handling in msm_iommu_probe()
  msm: fix Kconfig target board selection
  msm: fix compile failure on struct membank node member

* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses
  drivers: msm: video: add dev_set_name call
  drivers: video: msm: fix hang on disable_irq

* 'for-2637/s3c24xx-all' of git://git.fluff.org/bjdooks/linux:
  ARM: h1940: add UDA1380 to i2c devices list
  ARM: h1940: Fix backlight and LCD power functions
  ARM: S3C2440: fix boot failure introduced by recent changes in gpiolib
  ARM: S3C2440: various fixes in Kconfig file
  ARM: rx1950: Add UDA1380 to i2c devices list
  ARM: rx1950: Add LEDs support
  ARM: rx1950: Add battery device
  ARM: h1940: Implement mmc_power function
  ARM: h1940: Use gpiolib for latch access

Register UDA1380 codec during H1940 machine init
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Current implementation of LCD and backlight power control functions
is not complete, as result PDA consumes power in suspend.
Fix this issue by managing state of some latch bits, just like
WinMobile does.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Currently, text_poke_smp() passes a NULL as the third argument to
__stop_machine(), which will only run stop_machine_text_poke()
on 1 cpu. Change NULL -> cpu_online_mask, as stop_machine_text_poke()
is intended to be run on all cpus.

I actually didn't notice any problems with stop_machine_text_poke()
only being called on 1 cpu, but found this via code inspection.
Signed-off-by: NJason Baron <jbaron@redhat.com>
LKML-Reference: <20101028152026.GB2875@redhat.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Recent changes in s3c gpio break mini2440 board and may be others.
The problem is that mach-mini2440.c: mini2440_init()
(where we call s3c_gpio_setpull()) is called before s3c2440.c: s3c2440_init()
(where we initialize s3c24xx_gpiocfg_default.set_pull function pointer).
This causes dereferencing of NULL pointer at boot time and a kernel panic.
Signed-off-by: NAbdoulaye Walsimou Gaye <awg@embtoolkit.org>

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* kconfig symbols defined in arch/arm/mach-s3c2440/Kconfig are only available
  when ARCH_S3C2410 is selected, so no need to make some of them depend
  on ARCH_S3C2410.
* fix CPU_S3C24405B typo in "config S3C2440_DMA".
* mini2440: remove unconditionally select of SND_S3C24XX_SOC_S3C24XX_UDA134X.
Those fixes avoid the following warnings at make time:

scripts/kconfig/qconf arch/arm/Kconfig
warning: (MACH_MINI2440 && ARCH_S3C2410) selects SND_S3C24XX_SOC_S3C24XX_UDA134X
which has unmet direct dependencies (SND_S3C24XX_SOC && ARCH_S3C2410)
warning: (CPU_S3C2440 && ARCH_S3C2410 && S3C2410_DMA) selects S3C2440_DMA which
has unmet direct dependencies (ARCH_S3C2410 && CPU_S3C24405B)
warning: (CPU_S3C2440 && ARCH_S3C2410 || CPU_S3C2442 && ARCH_S3C2410)
selects CPU_S3C244X which has unmet direct dependencies (!ARCH_S3C2410)
Signed-off-by: NAbdoulaye Walsimou Gaye <awg@embtoolkit.org>

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* 'for-2637/i2c-all' of git://git.fluff.org/bjdooks/linux:
  i2c-intel-mid: Driver depends on PCI
  i2c-intel-mid: support for Moorestown and Medfield platform
  i2c-nomadik: fixup bus delays
  i2c-nomadik: support smbus emulation
  i2c-nomadik: dynamic clocking
  i2c-nomadik: documentation fixes
  i2c-s3c2410: Enable i2c clock only when doing some transfert

These two config options don't exist, and aren't ever going to.
So I simply delete them.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

If the board has a debug uart the user is given a choice of which
uart to use. The user can also select NONE, which means not to use one.
In most of our header files when NONE is selected nothing is defined
for MSM_DEBUG_UART_PHYS or MSM_DEBUG_UART_BASE. This causes a compile
failure in debug-macro.S which expect something to be defined there.

Example of the failure,

arch/arm/kernel/built-in.o: In function `hexbuf':
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_PHYS'
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_BASE'

This fixes the compile failure by adding an ifdef to debug-macro.S
that removes all the debug uart code in the case of NONE.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Originally there was an ifdef case to handle when no debug uart
was selected. In commit 0ea12930
that case was removed which causes the following build failure,

linux-2.6/arch/arm/kernel/debug.S: Assembler messages:
linux-2.6/arch/arm/kernel/debug.S:174: Error: bad instruction `addruart r1,r2'
linux-2.6/arch/arm/kernel/debug.S:176: Error: bad instruction `waituart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:177: Error: bad instruction `senduart r1,r3'
linux-2.6/arch/arm/kernel/debug.S:178: Error: bad instruction `busyuart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:190: Error: bad instruction `addruart r1,r2'

This is a partial revert to add back the case which was removed with
two caveats. First the API for the addruart macro was updated, and
the new addruart case now return 0xfff00000 so that a know IO mapping
is created instead of a random one.

Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jason Wang <jason77.wang@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

i2c-intel-mid driver uses PCI data structs and interfaces,
so it should depend on PCI.  Fixes these build errors:

drivers/i2c/busses/i2c-intel-mid.c:977: error: implicit declaration of function 'pci_request_region'
drivers/i2c/busses/i2c-intel-mid.c:1077: error: implicit declaration of function 'pci_release_region'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Ba Zheng <zheng.ba@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Runtime: Fix typo in status comparison causing warning

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
  kconfig: Have streamline_config process menuconfigs too
  kconfig: Fix streamline_config to read multi line deps in Kconfig files
  kconfig: Fix missing declaration of variable $dir in streamline_config.pl
  kconfig: Fix variable name typo %prompts in streamline_config.pl
  kconfig: Make localmodconfig handle environment variables

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
  b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmd
  mac80211: fix failure to check kmalloc return value in key_key_read
  libertas: Fix sd8686 firmware reload
  ath9k: Fix incorrect access of rate flags in RC
  netfilter: xt_socket: Make tproto signed in socket_mt6_v1().
  stmmac: enable/disable rx/tx in the core with a single write.
  net: atarilance - flags should be unsigned long
  netxen: fix kdump
  pktgen: Limit how much data we copy onto the stack.
  net: Limit socket I/O iovec total length to INT_MAX.
  USB: gadget: fix ethernet gadget crash in gether_setup
  fib: Fix fib zone and its hash leak on namespace stop
  cxgb3: Fix panic in free_tx_desc()
  cxgb3: fix crash due to manipulating queues before registration
  8390: Don't oops on starting dev queue
  dccp ccid-2: Stop polling
  dccp: Refine the wait-for-ccid mechanism
  dccp: Extend CCID packet dequeueing interface
  dccp: Return-value convention of hc_tx_send_packet()
  igbvf: fix panic on load
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: dream: remove dream driver and arch from tree

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Print mount_auth_tok_only param in ecryptfs_show_options
  ecryptfs: added ecryptfs_mount_auth_tok_only mount parameter
  ecryptfs: checking return code of ecryptfs_find_auth_tok_for_sig()
  ecryptfs: release keys loaded in ecryptfs_keyring_auth_tok_for_sig()
  eCryptfs: Clear LOOKUP_OPEN flag when creating lower file
  ecryptfs: call vfs_setxattr() in ecryptfs_setxattr()

Product codenames are OK, but once an actual product name is available,
it should be referenced as well.

  http://ark.intel.com/chipset.aspx?familyID=52499Signed-off-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This code is stalled, with no one working on it anymore, and the main
msm code is now going through the proper channels to get merged
correctly.

So remove it as it contains a number of kernel information leaks and it
is doubtful if it even still builds anymore.
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NBryan Huntsman <bryanh@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,ppc: Individual register get/set for ppc
  kgdbts: prevent re-entry to kgdbts before it unregisters
  debug_core,x86,blackfin: Clean up hw debug disable API
  kdb: Fix early debugging crash regression
  kgdb,arm: fix register dump
  kdb: fix per_cpu command to remove supress mask
  kdb: Add kdb kernel module sample

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc-agp: fix missing slab.h include

On module removal, the sdio version of b43 generates the following warning:

[  851.560519] ------------[ cut here ]------------
[  851.560531] WARNING: at drivers/mmc/core/core.c:237 mmc_wait_for_cmd+0x88/0x90()
[  851.560534] Hardware name: 20552PG
[  851.560536] Modules linked in: b43(-) ssb mmc_block binfmt_misc rfcomm sco bnep ppdev l2cap ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp kvm_intel kvm arc4 iwlagn snd_hda_codec_conexant snd_hda_intel snd_hda_codec iwlcore snd_hwdep snd_pcm thinkpad_acpi mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq r852 joydev snd_timer sm_common pcmcia nand snd_seq_device cfg80211 sdhci_pci btusb psmouse tpm_tis yenta_socket nand_ids lp snd pcmcia_rsrc nand_ecc bluetooth sdhci tpm pcmcia_core parport mtd snd_page_alloc serio_raw tpm_bios soundcore nvram led_class sha256_generic aes_i586 aes_generic dm_crypt i915 drm_kms_helper drm ahci intel_agp i2c_algo_bit intel_gtt e1000e libahci video agpgart output
[  851.560620] Pid: 2504, comm: rmmod Not tainted 2.6.36-titan0+ #1
[  851.560622] Call Trace:
[  851.560631]  [<c014a102>] warn_slowpath_common+0x72/0xa0
[  851.560636]  [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
[  851.560641]  [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
[  851.560645]  [<c014a152>] warn_slowpath_null+0x22/0x30
[  851.560649]  [<c04d94c8>] mmc_wait_for_cmd+0x88/0x90
[  851.560655]  [<c0401585>] ? device_release+0x25/0x80
[  851.560660]  [<c04df210>] mmc_io_rw_direct_host+0xa0/0x150
[  851.560665]  [<c04df370>] mmc_io_rw_direct+0x30/0x40
[  851.560669]  [<c04e06e7>] sdio_disable_func+0x37/0xa0
[  851.560683]  [<f8dfcb80>] b43_sdio_remove+0x30/0x50 [b43]
[  851.560687]  [<c04df8cc>] sdio_bus_remove+0x1c/0x60
[  851.560692]  [<c016d39f>] ? blocking_notifier_call_chain+0x1f/0x30
[  851.560697]  [<c0404991>] __device_release_driver+0x51/0xb0
[  851.560701]  [<c0404a7f>] driver_detach+0x8f/0xa0
[  851.560705]  [<c0403c83>] bus_remove_driver+0x63/0xa0
[  851.560709]  [<c0405039>] driver_unregister+0x49/0x80
[  851.560713]  [<c0405039>] ? driver_unregister+0x49/0x80
[  851.560718]  [<c04dfad7>] sdio_unregister_driver+0x17/0x20
[  851.560727]  [<f8dfcb42>] b43_sdio_exit+0x12/0x20 [b43]
[  851.560734]  [<f8dfe76f>] b43_exit+0x17/0x3c [b43]
[  851.560740]  [<c017fb8d>] sys_delete_module+0x13d/0x200
[  851.560747]  [<c01fd7d2>] ? do_munmap+0x212/0x300
[  851.560752]  [<c010311f>] sysenter_do_call+0x12/0x28
[  851.560757] ---[ end trace 31e14488072d2f7d ]---
[  851.560759] ------------[ cut here ]------------

The warning is caused by b43 not claiming the device before calling
sdio_disable_func().
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Reported-by: NArnd Hannemann <arnd@arndnet.de>
Tested-by: NArnd Hannemann <arnd@arndnet.de>
Cc: Stable <stable@kernel.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

I noticed two small issues in mac80211/debugfs_key.c::key_key_read while
reading through the code. Patch below.

The key_key_read() function returns ssize_t and the value that's actually
returned is the return value of simple_read_from_buffer() which also
returns ssize_t, so let's hold the return value in a ssize_t local
variable rather than a int one.

Also, memory is allocated dynamically with kmalloc() which can fail, but
the return value of kmalloc() is not checked, so we may end up operating
on a null pointer further on. So check for a NULL return and bail out with
-ENOMEM in that case.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

For the SD8686, we cannot rely on the scratch register to read the firmware
load status, because the same register is used for storing RX packet length.
Broaden the check to account for this.

The module can now be unloaded/reloaded successfully.

Based on the implementation from libertas_tf.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NSteve deRosier <steve@cozybit.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The index variable to access the rate flags should be obtained from the
inner loop counter which corresponds to the rate table structure.This
fixes the invalid rate selection i.e when the supported basic rate is
invalid on a particular band and also the following warning message.
Thanks to Raj for finding this out.

Call Trace:

 [<ffffffff8104ee4a>] warn_slowpath_common+0x7a/0xb0

 [<ffffffff8104ee95>] warn_slowpath_null+0x15/0x20

 [<ffffffffa0583c45>] ath_get_rate+0x595/0x5b0 [ath9k]

 [<ffffffff811a0636>] ? cpumask_next_and+0x36/0x50

 [<ffffffffa0405186>] rate_control_get_rate+0x86/0x160 [mac80211]

 [<ffffffffa040dfac>] invoke_tx_handlers+0x81c/0x12d0 [mac80211]

 [<ffffffffa040eae9>] ieee80211_tx+0x89/0x2b0 [mac80211]

 [<ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0

 [<ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]

 [<ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]

 [<ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]

 [<ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
[mac80211]

 [<ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0

 [<ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]

 [<ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]

 [<ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]

 [<ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
[mac80211]

 [<ffffffffa03f8896>] ieee80211_scan_work+0x146/0x600 [mac80211]

 [<ffffffff8133a375>] ? schedule+0x2f5/0x8e0

 [<ffffffffa03f8750>] ? ieee80211_scan_work+0x0/0x600 [mac80211]

 [<ffffffff81064fcf>] process_one_work+0x10f/0x380

 [<ffffffff81066bc2>] worker_thread+0x162/0x340

 [<ffffffff81066a60>] ? worker_thread+0x0/0x340

Cc: stable@kernel.org
Signed-off-by: NMohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

commit 534af108(kgdb,kdb: individual
register set and and get API) introduce dbg_get_reg/dbg_set_reg API
for individual register get and set.

This patch implement those APIs for ppc.
Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

The "kgdb_connected" variable of debug_core just indicates whether or
not kgdbts is connected to the debug_core.  It does not completely
prevent a script from trying invoke kgdbts again and possibly crashing
the system (see Call Trace below).

The configured variable in kgtbts can be used instead of
kgdb_connected instead of kgdb_connected. The cleanup_kgdbts() can
also be removed because there is no possible way to build kgdbts as a
kernel module that you could unload with rmmod.

Call Trace:
-----------------------------------------------------------------
root:/$ echo kgdbts=V1S1000 > /sys/module/kgdbts/parameters/kgdbts
kgdb: Unregistered I/O driver kgdbts, debugger disabled.
------------[ cut here ]------------
WARNING: at kernel/debug/debug_core.c:1002
kgdb_unregister_io_module+0xec/0x100()
Hardware name: Moon Creek platform
Modules linked in:
Pid: 664, comm: sh Not tainted 2.6.34.1-WR4.0.0.0_standard #58
Call Trace:
 [<c103b1ed>] warn_slowpath_common+0x6d/0xa0
 [<c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100
 [<c1079fdc>] ? kgdb_unregister_io_module+0xec/0x100
 [<c10544e0>] ? param_attr_store+0x0/0x20
 [<c103b235>] warn_slowpath_null+0x15/0x20
 [<c1079fdc>] kgdb_unregister_io_module+0xec/0x100
 [<c124e4ea>] cleanup_kgdbts+0x1a/0x20
 [<c124eced>] param_set_kgdbts_var+0x6d/0xb0
 [<c124ec80>] ? param_set_kgdbts_var+0x0/0xb0
 [<c10544f7>] param_attr_store+0x17/0x20
 [<c105457c>] module_attr_store+0x2c/0x40
 [<c111fe84>] sysfs_write_file+0x94/0xf0
 [<c10d42f6>] vfs_write+0x96/0x130
 [<c111fdf0>] ? sysfs_write_file+0x0/0xf0
 [<c10d44d6>] sys_write+0x46/0xd0
 [<c13bf329>] system_call_done+0x0/0x4
---[ end trace 4eb028c6ee43154c ]---
kgdb: Unregistered I/O driver kgdbts, debugger disabled.
-----------------------------------------------------------------

[jason.wessel@windriver.com: remove cleanup_kgdbts() ]
Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

The kgdb_disable_hw_debug() was an architecture specific function for
disabling all hardware breakpoints on a per cpu basis when entering
the debug core.

This patch will remove the weak function kdbg_disable_hw_debug() and
change it into a call back which lives with the rest of hw breakpoint
call backs in struct kgdb_arch.
Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

The kdb_current legally be equal to NULL in the early boot of the x86
arch.  The problem pcan be observed by booting with the kernel arguments:

    earlyprintk=vga ekgdboc=kbd kgdbwait

The kdb shell will oops on entry and recursively fault because it
cannot get past the final stage of shell initialization.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

DBG_MAX_REG_NUM incorrectly had the number of indices in the GDB regs
array rather than the number of registers, leading to an oops when the
"rd" command is used in KDB.

Cc: stable@kernel.org
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

Rusty pointed out that the per_cpu command uses up lots of space on
the stack and the cpu supress mask is probably not needed.

This patch removes the need for the supress mask as well as fixing up
the following problems with the kdb per_cpu command:
  * The per_cpu command should allow an address as an argument
  * When you have more data than can be displayed on one screen allow
    the user to break out of the print loop.
Reported-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

Add an example of how to add a dynamic kdb shell command via a kernel
module.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (46 commits)
  ftrace/MIPS: Enable C Version of recordmcount
  ftrace/MIPS: Add module support for C version of recordmcount
  ftrace/MIPS: Add MIPS64 support for C version of recordmcount
  MIPS: Make TASK_SIZE reflect proper size for both 32 and 64 bit processes.
  MIPS: Allow UserLocal on MIPS_R1 processors
  MIPS: Honor L2 bypass bit
  MIPS: Add BMIPS CP0 register definitions
  MIPS: Add BMIPS processor types to Kconfig
  MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC code
  MIPS: Add support for hardware performance events (mipsxx)
  MIPS: Perf-events: Add callchain support
  MIPS: add support for hardware performance events (skeleton)
  MIPS: add support for software performance events
  MIPS: define local_xchg from xchg_local to atomic_long_xchg
  MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant
  MIPS: AR7: Initialize GPIO earlier
  MIPS: Add platform device and Kconfig for Octeon USB EHCI / OHCI
  USB: Add EHCI and OHCH glue for OCTEON II SOCs.
  MIPS: Octeon: Add register definitions for EHCI / OHCI USB glue logic.
  MIPS: Octeon: Apply CN63XXP1 errata workarounds.
  ...

Selects HAVE_C_RECORDMCOUNT to use the C version of the recordmcount
intead of the old Perl Version of recordmcount.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
LKML-Reference: <bb99009a9ac79d3f55a8c8bf1c8bd2bc0e1f160e.1288176026.git.wuzhangjin@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since MIPS modules' address space differs from the core kernel space, to access
the _mcount in the core kernel, the kernel functions in modules must use long
call (-mlong-calls): load the _mcount address into one register and jump to the
address stored by the register:

 c:  3c030000        lui     v1,0x0  <-------->  b label
           c: R_MIPS_HI16  _mcount
           c: R_MIPS_NONE  *ABS*
           c: R_MIPS_NONE  *ABS*
10:  64630000        daddiu  v1,v1,0
          10: R_MIPS_LO16 _mcount
          10: R_MIPS_NONE *ABS*
          10: R_MIPS_NONE *ABS*
14:	03e0082d 	move	at,ra
18:	0060f809 	jalr	v1
label:

In the old Perl version of recordmcount, we only need to record the position of
the 1st R_MIPS_HI16 type of _mcount, and later, in ftrace_make_nop(), replace
the instruction in this position by a "b label" and in ftrace_make_call(),
replace it back.

But, the default C version of recordmcount records all of the _mcount symbols,
so, we must filter the 2nd _mcount like the Perl version of recordmcount does.

The C version of recordmcount copes with the symbols before they are linked, So
It doesn't know the type of the symbols and therefore can not filter the
symbols as the Perl version of recordmcount does. But as we can see above, the
2nd _mcount symbols of the long call alawys follows the 1st _mcount symbol of
the same long call, which means the offset from the 1st to the 2nd is fixed, it
is 0x10-0xc = 4 here, 4 is the length of the 1st load instruciton, for MIPS has
fixed length of instructions, this offset is always 4.

And as we know, the _mcount is inserted into the entry of every kernel
function, the offset between the other _mcount's is expected to be always
bigger than 4. So, to filter the 2ns _mcount symbol of the long call, we can
simply check the offset between two _mcount symbols, If it is 4, then, filter
the 2nd _mcount symbol.

To avoid touching too much code, an 'empty' function fn_is_fake_mcount() is
added for all of the archs, and the specific archs can override it via chaning
the function pointer: is_fake_mcount in do_file() with the e_machine. e.g. This
patch adds MIPS_is_fake_mcount() to override the default fn_is_fake_mcount()
pointed by is_fake_mcount.

This fn_is_fake_mcount() checks if the _mcount symbol is fake, e.g. the 2nd
_mcount symbol of the long call is fake, for there are 2 _mcount symbols mapped
to one real mcount call, so, one of them is fake and must be filtered.

This fn_is_fake_mcount() is called in sift_rel_mcount() after finding the
_mcount symbols and before adding the _mcount symbol into mrelp, so, it can
prevent the fake mcount symbol going into the last __mcount_loc table.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
LKML-Reference: <b866f0138224340a132d31861fa3f9300dee30ac.1288176026.git.wuzhangjin@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>