- 26 5月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Weston Andros Adamson <dros@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 25 5月, 2012 2 次提交
-
-
由 Weston Andros Adamson 提交于
The state manager can handle SEQ4_STATUS_CB_PATH_DOWN* flags with a BIND_CONN_TO_SESSION instead of destroying the session and creating a new one. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
This patch adds the BIND_CONN_TO_SESSION operation which is needed for upcoming SP4_MACH_CRED work and useful for recovering from broken connections without destroying the session. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 23 5月, 2012 3 次提交
-
-
由 Chuck Lever 提交于
nfs4_reset_all_state() refreshes the boot verifier a server sees to trigger that server to wipe this client's state. This function is invoked when an NFSv4.1 server reports that it has revoked some or all of a client's NFSv4 state. To facilitate server trunking discovery, we will eventually want to move the cl_boot_time field to a more global structure. The Uniform Client String model (and specifically, server trunking detection) requires that all servers see the same boot verifier until the client actually does reboot, and not a fresh verifier every time the client unmounts and remounts the server. Without the cl_boot_time field, however, nfs4_reset_all_state() will have to find some other way to force the server to purge the client's NFSv4 state. Because these verifiers are opaque (ie, the server doesn't know or care that they happen to be timestamps), we can force the server to wipe NFSv4 state by updating the boot verifier as we do now, then immediately afterwards establish a fresh client ID using the old boot verifier again. Hopefully there are no extra paranoid server implementations that keep track of the client's boot verifiers and prevent clients from reusing a previous one. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: this structure is unused. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: When naming fields and data types, follow established conventions to facilitate accurate grep/cscope searches. Additionally, for consistency, move the scope field into the NFSv4- specific part of the nfs_client, and free that memory in the logic that shuts down NFSv4 nfs_clients. Introduced by commit 99fe60d0 "nfs41: exchange_id operation", April 1 2009. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 5月, 2012 1 次提交
-
-
由 Bryan Schumaker 提交于
This function is really getting the root filehandle and not the root dentry of the filesystem. I also removed the rpc_ops lookup from nfs4_get_rootfh() under the assumption that if we reach this function then we already know we are using NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 4月, 2012 4 次提交
-
-
由 Bryan Schumaker 提交于
This simplifies the code for v2 and v3 and gives v4 a chance to decide on referrals without needing to modify the generic client. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
And also remove the unneeded rpc_op. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I create a new proc_lookup_mountpoint() to use when submounting an NFS v4 share. This function returns an rpc_clnt to use for performing an fs_locations() call on a referral's mountpoint. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Whenever lookup sees wrongsec do a secinfo and retry the lookup to find attributes of the file or directory, such as "is this a referral mountpoint?". This also allows me to remove handling -NFS4ERR_WRONSEC as part of getattr xdr decoding. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 4月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
The NFSv4 spec is ambiguous about whether or not it is permissible to reuse open owner names, so play it safe. This patch adds a timestamp to the state_owner structure, and combines that with the IDA based uniquifier. Fixes a regression whereby the Linux server returns NFS4ERR_BAD_SEQID. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
It is quite possible for the release_lockowner RPC call to race with the close RPC call, in which case, we cannot dereference lsp->ls_state in order to find the nfs_server. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 09 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Ensure that we select delegation stateids first, then lock stateids and then open stateids. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 3月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
If a setattr() fails because of an NFS4ERR_OPENMODE error, it is probably due to us holding a read delegation. Ensure that the recovery routines return that delegation in this case. Reported-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
-
由 Trond Myklebust 提交于
Otherwise we can end up with sequence id problems if the client reuses the owner_id before the server has processed the release_lockowner Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 06 3月, 2012 5 次提交
-
-
由 Trond Myklebust 提交于
Replace the union with the common struct stateid4 as defined in both RFC3530 and RFC5661. This makes it easier to access the sequence id, which will again make implementing support for parallel OPEN calls easier. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It is really a function for selecting the correct stateid to use in a read or write situation. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Change the name to reflect what we're really doing: testing two stateids for whether or not they match according the the rules in RFC3530 and RFC5661. Move the code from callback_proc.c to nfs4proc.c Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If we know that the delegation stateid is bad or revoked, we need to remove that delegation as soon as possible, and then mark all the stateids that relied on that delegation for recovery. We cannot use the delegation as part of the recovery process. Also note that NFSv4.1 uses a different error code (NFS4ERR_DELEG_REVOKED) to indicate that the delegation was revoked. Finally, ensure that setlk() and setattr() can both recover safely from a revoked delegation. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
-
- 02 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
The NFS4CLNT_LAYOUTRECALL bit is a long-term impediment to scalability. It basically stops all other recalls by a given server once any layout recall is requested. If the recall is for a different file, then we don't care. If the recall applies to the same file, then we're in one of two situations: Either we are in the case of a replay of an existing request, in which case the session is supposed to deal with matters, or we are dealing with a completely different request, in which case we should just try to process it. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 2月, 2012 8 次提交
-
-
由 Trond Myklebust 提交于
Store a pointer to the rpc_task in struct nfs_seqid so that we can wake up only that request that is able to grab the lock after we've released it. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We have to ensure that the wake up from the waitqueue and the assignment of xprt->snd_task are atomic. We can do this by assigning the snd_task while under the waitqueue spinlock. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Clean up. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Clean up Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Again, We're unlikely to ever need more than 2^31 simultaneous lock owners, so let's replace the custom allocator. Now that there are no more users, we can also get rid of the custom allocator code. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We're unlikely to ever need more than 2^31 simultaneous open owners, so let's replace the custom allocator with the generic ida allocator. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 06 1月, 2012 1 次提交
-
-
由 Chuck Lever 提交于
Servers have a finite amount of memory to store NFSv4 open and lock owners. Moreover, servers may have a difficult time determining when they can reap their state owner table, thanks to gray areas in the NFSv4 protocol specification. Thus clients should be careful to reuse state owners when possible. Currently Linux is not too careful. When a user has closed all her files on one mount point, the state owner's reference count goes to zero, and it is released. The next OPEN allocates a new one. A workload that serially opens and closes files can run through a large number of open owners this way. When a state owner's reference count goes to zero, slap it onto a free list for that nfs_server, with an expiry time. Garbage collect before looking for a state owner. This makes state owners for active users available for re-use. Now that there can be unused state owners remaining at umount time, purge the state owner free list when a server is destroyed. Also be sure not to reclaim unused state owners during state recovery. This change has benefits for the client as well. For some workloads, this approach drops the number of OPEN_CONFIRM calls from the same as the number of OPEN calls, down to just one. This reduces wire traffic and thus open(2) latency. Before this patch, untarring a kernel source tarball shows the OPEN_CONFIRM call counter steadily increasing through the test. With the patch, the OPEN_CONFIRM count remains at 1 throughout the entire untar. As long as the expiry time is kept short, I don't think garbage collection should be terribly expensive, although it does bounce the clp->cl_lock around a bit. [ At some point we should rationalize the use of the nfs_server ->destroy method. ] Signed-off-by: NChuck Lever <chuck.lever@oracle.com> [Trond: Fixed a garbage collection race and a few efficiency issues] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 8月, 2011 1 次提交
-
-
由 J. Bruce Fields 提交于
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 25 8月, 2011 3 次提交
-
-
由 Trond Myklebust 提交于
The NFSv4 spec does not specify that the server must repeat that error, so in order to avoid having the delegations revoked, we should handle it immediately. Also note that NFS4ERR_CB_PATH_DOWN does in fact renew the lease... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
RFC3530 states that if the client holds a delegation, then it is obliged to continue to send RENEW calls once every lease period in order to allow the server to return NFS4ERR_CB_PATH_DOWN if the callback path is unreachable. This is not required for NFSv4.1, since the server can at any time set the SEQ4_STATUS_CB_PATH_DOWN_SESSION in any SEQUENCE operation. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 8月, 2011 1 次提交
-
-
由 Fred Isaman 提交于
Block layout needs it to determine IO size. Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NTao Guo <glorioustao@gmail.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 7月, 2011 1 次提交
-
-
由 Al Viro 提交于
instead of path_get()/path_put(), we can just use nfs_sb_{,de}active() to pin the superblock down. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 13 7月, 2011 2 次提交
-
-
由 Bryan Schumaker 提交于
If the client is using NFS v4.1, then we can use SECINFO_NO_NAME to find the secflavor for the initial mount. If the server doesn't support SECINFO_NO_NAME then I fall back on the "guess and check" method used for v4.0 mounts. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
can be skipped if the "eir_server_scope" from the exchange_id proc differs from previous calls. Also, in the future server_scope will be useful for determining whether client trunking is available Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-