- 05 6月, 2013 38 次提交
-
-
由 Laurent Pinchart 提交于
GPIOLIB dependency handling was added to the PINCTRL core by commit 2afe8229 Author: Haojian Zhuang <haojian.zhuang@linaro.org> Date: Thu Mar 28 07:34:19 2013 +0800 pinctrl: core: add dependence of GPIOLIB There is not need to handle that dependency at the SH Mobile level anymore. Revert commit 6722f6cb Author: Magnus Damm <damm@opensource.se> Date: Mon Mar 18 22:58:18 2013 +0900 ARM: shmobile: Disallow PINCTRL without GPIOLIB Modify mach-shmobile to only select PINCTRL in case of ARCH_WANT_OPTIONAL_GPIOLIB is set. This fixes a build error triggered when adding a new SoC lacking GPIO software support (ARCH_WANT_OPTIONAL_GPIOLIB=n): Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Guennadi Liakhovetski 提交于
This patch adds pinmux groups and functions for the two MMCIF and four SDHI interfaces on r8a73a4 (APE6). Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Kuninori Morimoto 提交于
Add MMCIF CLK/CMD/DATA groups to R8A7778 PFC driver. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Kuninori Morimoto 提交于
Add HSPI CLK/CS/RX/TX pin groups to R8A7778 PFC driver. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Kuninori Morimoto 提交于
Add I2C SDA/SCL pin groups to R8A7778 PFC driver. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Guennadi Liakhovetski 提交于
Fix multiple occurrences of the "RESEVED" typo. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Guennadi Liakhovetski 提交于
Fix several errors in Peripheral Function Select register tables for r8a7790, which prevent various function pins from being correctly configured. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Kuninori Morimoto 提交于
IP2[31] func2 is IRQ1A, not IRQ3A Reported-by: NYusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Sergei Shtylyov 提交于
Add Ether RMII/LINK/MAGIC pin groups to R8A7779 PFC driver. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart<laurent.pinchart@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Sergei Shtylyov 提交于
Add Ether RMII/LINK/MAGIC pin groups to R8A7778 PFC driver. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart<laurent.pinchart@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Vladimir Barinov 提交于
Add VIN DATA[0:8]/CLK/HSYNC/VSYNC pin groups to R8A7778 PFC driver. While at it, add SH_PFC_MUX8() macro for 8-bit data busses. Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com> [Sergei: updated the copyrights, added SH_PFC_MUX8() macro for 8-bit data bus, made use of SH_PFC_*() macros to define the pin groups.] Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
No sh73a0 platform use the function GPIOs API. Remove it. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Sergei Shtylyov 提交于
Add USB0/1 PENC/USB_OVC pin groups to R8A7778 PFC driver. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
The sh73a0 has an internal power gate on the VCCQ power supply for the SDHI0 device that is controlled (for some strange reason) by a bit in a PFC register. This feature should be exposed as a regulator. As the same register is also used for pin control purposes there is no way to achieve atomic read/write sequences with a separate regulator driver. We thus need to implement the regulator here. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add two optional init and exit SoC operations and call them from the core at probe and remove time. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Magnus Damm 提交于
Use DEFINE_RES_MEM() to save a couple of lines of code. Signed-off-by: NMagnus Damm <damm@opensource.se> [lp: Don't declare r8a7779_pfc_resources as const] Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Move GPIOs handling from the PFC device to separate GPIO devices. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Kuninori Morimoto 提交于
This patch was tested on Bock-W board Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Kuninori Morimoto 提交于
SDHI 1/2 are the target Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Function GPIOs have been removed, remove comments that refer to them. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
No r8a7740 platform use the function GPIOs API. Remove it. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Bastian Hecht 提交于
We use the new pinctrl framework now. Signed-off-by: NBastian Hecht <hechtb+renesas@gmail.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 04 6月, 2013 2 次提交
-
-
由 Laurent Pinchart 提交于
All r8a7740 platforms now use the pinctrl API to control the HDMI pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
All r8a7740 platforms now use the pinctrl API to control the FSI pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-