Enable PSP FW loading for PSP IP v13.0.11
Signed-off-by: NTim Huang <tim.huang@amd.com>
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This enable VCN PG, CG and JPEG PG, CG
Signed-off-by: NSaleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this patch is to enable nbio support for NBIO v7.7.1.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The SMU IP v13.0.4 ppt interface is shared by IP v13.0.11, they use
the different mailbox register offset. So use the specific mailbox
registers offset for v13.0.4.
Signed-off-by: NTim Huang <tim.huang@amd.com>
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set the default reset method to mode2 for SMU IP v13.0.11
Signed-off-by: NTim Huang <tim.huang@amd.com>
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable the SMU IP v13.0.11 GFXOFF control
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this patch to add smu 13 support for smu 13.0.11.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add the entry to set the ppt functions for SMU IP v13.0.11.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add initial support for GC 11.0.4 in KFD compute driver.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add gmc v11 support for GC 11.0.4.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add common soc21 ip block support for GC 11.0.4.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this patch to add GC 11.0.4 gfx support to gfx11 implementation.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set the APU flag appropriately for GC 11.0.4.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this patch is to set GC 11.0.4 family.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add PSP IP v13.0.11 ip discovery support.
Signed-off-by: NTim Huang <tim.huang@amd.com>
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this patch is to enable mes for GC 11.0.4.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable gfx v11 for GC 11.0.4.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable gmc (graphic memory controller) v11 for GC 11.0.4.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable soc21 common for GC 11.0.4.
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

vram_usagebyfirmware v2_2 is only used in SRIOV case, skip the related
settings in bare-metal case currently.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add an explicit printing to tell when finishing rpm execution
in amdgpu.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

After executing BACO exit, driver needs to poll the status
to ensure FW has completed BACO exit sequence to prevent
timing issue.

v2: use usleep_range to replace msleep to fix checkpatch.pl warnings
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Return true early if ASIC is in BACO state already, no need
to talk to SMU. It can fix the issue that driver was not
calling BACO exit at all in runtime pm resume, and a timing
issue leading to a PCI AER error happened eventually.

Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Suggested-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For vram_usagebyfirmware_v2_2, fw_vram_reserve is not used. So
fw_vram_usage_va is NULL, and cannot do virt data exchange
anymore. Should add drv_vram_usage_va to do virt data exchange
in vram_usagebyfirmware_v2_2 case. And refine some code style
checks in pre add vram reservation logic patch
Signed-off-by: NTong Liu01 <Tong.Liu01@amd.com>
Acked-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

-v2: 1. rename variable to redue confuse
     2. optimize the code
-v3: move new define out of the middle of the code
-v4: squash in minmax error fix (Luben)

When applications try to allocate large system (more than > 128GB),
"stall cpu" is reported.

for such large system memory, walk_page_range takes more than 20s usually.
The warning message can be removed when splitting hmm range into smaller
ones which is not more 64GB for each walk_page_range.

[  164.437617] amdgpu:amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu:1753: amdgpu: 	create BO VA 0x7f63c7a00000 size 0x2f16000000 domain CPU
[  164.488847] amdgpu:amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu:1785: amdgpu: creating userptr BO for user_addr = 7f63c7a00000
[  185.439116] rcu: INFO: rcu_sched self-detected stall on CPU
[  185.439125] rcu: 	8-....: (20999 ticks this GP) idle=e22/1/0x4000000000000000 softirq=2242/2242 fqs=5249
[  185.439137] 	(t=21000 jiffies g=6325 q=1215)
[  185.439141] NMI backtrace for cpu 8
[  185.439143] CPU: 8 PID: 3470 Comm: kfdtest Kdump: loaded Tainted: G           O      5.12.0-0_fbk5_zion_rc1_5697_g2c723fb88626 #1
[  185.439147] Hardware name: HPE ProLiant XL675d Gen10 Plus/ProLiant XL675d Gen10 Plus, BIOS A47 11/06/2020
[  185.439150] Call Trace:
[  185.439153]  <IRQ>
[  185.439157]  dump_stack+0x64/0x7c
[  185.439163]  nmi_cpu_backtrace.cold.7+0x30/0x65
[  185.439165]  ? lapic_can_unplug_cpu+0x70/0x70
[  185.439170]  nmi_trigger_cpumask_backtrace+0xf9/0x100
[  185.439174]  rcu_dump_cpu_stacks+0xc5/0xf5
[  185.439178]  rcu_sched_clock_irq.cold.97+0x112/0x38c
[  185.439182]  ? tick_sched_handle.isra.21+0x50/0x50
[  185.439185]  update_process_times+0x8c/0xc0
[  185.439189]  tick_sched_timer+0x63/0x70
[  185.439192]  __hrtimer_run_queues+0xff/0x250
[  185.439195]  hrtimer_interrupt+0xf4/0x200
[  185.439199]  __sysvec_apic_timer_interrupt+0x51/0xd0
[  185.439201]  sysvec_apic_timer_interrupt+0x69/0x90
[  185.439206]  </IRQ>
[  185.439207]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[  185.439211] RIP: 0010:clear_page_rep+0x7/0x10
[  185.439214] Code: e8 fe 7c 51 00 44 89 e2 48 89 ee 48 89 df e8 60 ff ff ff c6 03 00 5b 5d 41 5c c3 cc cc cc cc cc cc cc cc b9 00 02 00 00 31 c0 <f3> 48 ab c3 0f 1f 44 00 00 31 c0 b9 40 00 00 00 66 0f 1f 84 00 00
[  185.439218] RSP: 0018:ffffc9000f58f818 EFLAGS: 00000246
[  185.439220] RAX: 0000000000000000 RBX: 0000000000000881 RCX: 000000000000005c
[  185.439223] RDX: 0000000000100dca RSI: 0000000000000000 RDI: ffff88a59e0e5d20
[  185.439225] RBP: ffffea0096783940 R08: ffff888118c35280 R09: ffffea0096783940
[  185.439227] R10: ffff888000000000 R11: 0000160000000000 R12: ffffea0096783980
[  185.439228] R13: ffffea0096783940 R14: ffff88b07fdfdd00 R15: 0000000000000000
[  185.439232]  prep_new_page+0x81/0xc0
[  185.439236]  get_page_from_freelist+0x13be/0x16f0
[  185.439240]  ? release_pages+0x16a/0x4a0
[  185.439244]  __alloc_pages_nodemask+0x1ae/0x340
[  185.439247]  alloc_pages_vma+0x74/0x1e0
[  185.439251]  __handle_mm_fault+0xafe/0x1360
[  185.439255]  handle_mm_fault+0xc3/0x280
[  185.439257]  hmm_vma_fault.isra.22+0x49/0x90
[  185.439261]  __walk_page_range+0x692/0x9b0
[  185.439265]  walk_page_range+0x9b/0x120
[  185.439269]  hmm_range_fault+0x4f/0x90
[  185.439274]  amdgpu_hmm_range_get_pages+0x24f/0x260 [amdgpu]
[  185.439463]  amdgpu_ttm_tt_get_user_pages+0xc2/0x190 [amdgpu]
[  185.439603]  amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x49f/0x7a0 [amdgpu]
[  185.439774]  kfd_ioctl_alloc_memory_of_gpu+0xfb/0x410 [amdgpu]
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This partially reverts 20543be9.

Calling drm_connector_update_edid_property() in
amdgpu_connector_free_edid() causes a noticeable pause in
the system every 10 seconds on polled outputs so revert this
part of the change.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2257
Cc: Claudio Suarez <cssk@net-c.es>
Acked-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The driver is MIT, so add the licenses.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2265Acked-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Configure related settings to enable it.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move the topology-locked part of kfd_topology_add_device into a separate
function to simlpify error handling and release the topology lock
consistently.
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NFelix Kuehling <felix.kuehling@gmail.com>
Signed-off-by: NMa Jun <Jun.Ma2@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Prepare for enableing VCN RAS poison.

v2: move SHIFT and MASK definitions to related sh_mask.h file.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- in device_resume, sriov configure interrupt should be in full access,
  so release_full_gpu should be done after kfd_resume.
- remove the previous workaround solution for sriov.

Fixes: ec4927d4 ("drm/amdgpu: fix for suspend/resume sequence under sriov")
Signed-off-by: NShikang Fan <shikang.fan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
If the timing generator isnt running, it does not make sense to trigger
a sync on the corresponding OTG. Check this condition before starting.
Otherwise, this will cause error like:

*ERROR* GSL: Timeout on reset trigger!

Fixes: dc55b106 ("drm/amd/display: Disable phantom OTG after enable for plane disable")
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct GOP_VBIOS_CONTENT and refactor the
rest of the code accordingly.

Important to mention is that doing a build before/after this patch
results in no functional binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Signed-off-by: NPaulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 5aa66375.

This causes a blank screen on boot on an Asus G513QY / 6800M laptop.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2259
Cc: Aric Cyr <Aric.Cyr@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Tested-by: NMike Lothian <mike@fireburn.co.uk>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If CONFIG_DRM_AMDGPU=y and CONFIG_DRM_AMD_DC is not set,
gcc complained about unused-function :

drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1705:13: error: ‘amdgpu_discovery_set_sriov_display’ defined but not used [-Werror=unused-function]
 static void amdgpu_discovery_set_sriov_display(struct amdgpu_device *adev)
             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

To fix this error, use CONFIG_DRM_AMD_DC to wrap
the definition of amdgpu_discovery_set_sriov_display().

Fixes: 25263da3 ("drm/amdgpu: rework SR-IOV virtual display handling")
Signed-off-by: NRen Zhijie <renzhijie2@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix minmax warning by using min_t() macro and explicitly specifying
the assignment type.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NAlex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
    [  754.862560] refcount_t: underflow; use-after-free.
    [  754.862898] Call Trace:
    [  754.862903]  <TASK>
    [  754.862913]  amdgpu_job_free_cb+0xc2/0xe1 [amdgpu]
    [  754.863543]  drm_sched_main.cold+0x34/0x39 [amd_sched]

[How]
    The fw_fence may be not init, check whether dma_fence_init
    is performed before job free
Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes: f7ba887f ("drm/amdgpu: Adjust logic around GTT size (v3)")
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

root cause that S2A need to use deduct offset flag.
after setting this flag, vcn0 doorbell value works.
so return it as before
Signed-off-by: NJane Jian <Jane.Jian@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update the SW CTF limit from existing register
when there's a fan failure detected via SMU interrupt.
Signed-off-by: Nlyndonli <Lyndon.Li@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>