Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 22 11月, 2016 8 次提交
  3. 18 11月, 2016 10 次提交
  5. 16 11月, 2016 5 次提交
  7. 15 11月, 2016 3 次提交
  9. 12 11月, 2016 6 次提交
  11. 11 11月, 2016 6 次提交
    • J
      block: hook up writeback throttling · 87760e5e
      由 Jens Axboe 提交于 
      Enable throttling of buffered writeback to make it a lot
more smooth, and has way less impact on other system activity.
Background writeback should be, by definition, background
activity. The fact that we flush huge bundles of it at the time
means that it potentially has heavy impacts on foreground workloads,
which isn't ideal. We can't easily limit the sizes of writes that
we do, since that would impact file system layout in the presence
of delayed allocation. So just throttle back buffered writeback,
unless someone is waiting for it.

The algorithm for when to throttle takes its inspiration in the
CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors
the minimum latencies of requests over a window of time. In that
window of time, if the minimum latency of any request exceeds a
given target, then a scale count is incremented and the queue depth
is shrunk. The next monitoring window is shrunk accordingly. Unlike
CoDel, if we hit a window that exhibits good behavior, then we
simply increment the scale count and re-calculate the limits for that
scale value. This prevents us from oscillating between a
close-to-ideal value and max all the time, instead remaining in the
windows where we get good behavior.

Unlike CoDel, blk-wb allows the scale count to to negative. This
happens if we primarily have writes going on. Unlike positive
scale counts, this doesn't change the size of the monitoring window.
When the heavy writers finish, blk-bw quickly snaps back to it's
stable state of a zero scale count.

The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency
target to me met. It defaults to 2 msec for non-rotational storage, and
75 msec for rotational storage. Setting this value to '0' disables
blk-wb. Generally, a user would not have to touch this setting.

We don't enable WBT on devices that are managed with CFQ, and have
a non-root block cgroup attached. If we have a proportional share setup
on this particular disk, then the wbt throttling will interfere with
that. We don't have a strong need for wbt for that case, since we will
rely on CFQ doing that for us.
Signed-off-by: NJens Axboe <axboe@fb.com>
      87760e5e
    • J
      blk-wbt: add general throttling mechanism · e34cbd30
      由 Jens Axboe 提交于 
      We can hook this up to the block layer, to help throttle buffered
writes.

wbt registers a few trace points that can be used to track what is
happening in the system:

wbt_lat: 259:0: latency 2446318
wbt_stat: 259:0: rmean=2446318, rmin=2446318, rmax=2446318, rsamples=1,
               wmean=518866, wmin=15522, wmax=5330353, wsamples=57
wbt_step: 259:0: step down: step=1, window=72727272, background=8, normal=16, max=32

This shows a sync issue event (wbt_lat) that exceeded it's time. wbt_stat
dumps the current read/write stats for that window, and wbt_step shows a
step down event where we now scale back writes. Each trace includes the
device, 259:0 in this case.
Signed-off-by: NJens Axboe <axboe@fb.com>
      e34cbd30
    • J
      block: add scalable completion tracking of requests · cf43e6be
      由 Jens Axboe 提交于 
      For legacy block, we simply track them in the request queue. For
blk-mq, we track them on a per-sw queue basis, which we can then
sum up through the hardware queues and finally to a per device
state.

The stats are tracked in, roughly, 0.1s interval windows.

Add sysfs files to display the stats.

The feature is off by default, to avoid any extra overhead. In-kernel
users of it can turn it on by setting QUEUE_FLAG_STATS in the queue
flags. We currently don't turn it on if someone just reads any of
the stats files, that is something we could add as well.
Signed-off-by: NJens Axboe <axboe@fb.com>
      cf43e6be
    • T
      block: cfq_cpd_alloc() should use @gfp · ebc4ff66
      由 Tejun Heo 提交于 
      cfq_cpd_alloc() which is the cpd_alloc_fn implementation for cfq was
incorrectly hard coding GFP_KERNEL instead of using the mask specified
through the @gfp parameter.  This currently doesn't cause any actual
issues because all current callers specify GFP_KERNEL.  Fix it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: e4a9bde9 ("blkcg: replace blkcg_policy->cpd_size with ->cpd_alloc/free_fn() methods")
Signed-off-by: NJens Axboe <axboe@fb.com>
      ebc4ff66
    • C
      nvme: don't pass the full CQE to nvme_complete_async_event · 7bf58533
      由 Christoph Hellwig 提交于 
      We only need the status and result fields, and passing them explicitly
makes life a lot easier for the Fibre Channel transport which doesn't
have a full CQE for the fast path case.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>
      7bf58533
    • C
      nvme: introduce struct nvme_request · d49187e9
      由 Christoph Hellwig 提交于 
      This adds a shared per-request structure for all NVMe I/O.  This structure
is embedded as the first member in all NVMe transport drivers request
private data and allows to implement common functionality between the
drivers.

The first use is to replace the current abuse of the SCSI command
passthrough fields in struct request for the NVMe command passthrough,
but it will grow a field more fields to allow implementing things
like common abort handlers in the future.

The passthrough commands are handled by having a pointer to the SQE
(struct nvme_command) in struct nvme_request, and the union of the
possible result fields, which had to be turned from an anonymous
into a named union for that purpose.  This avoids having to pass
a reference to a full CQE around and thus makes checking the result
a lot more lightweight.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>
      d49187e9
  13. 10 11月, 2016 2 次提交
    • A
      skd: fix function prototype · 41c9499b
      由 Arnd Bergmann 提交于 
      Building with W=1 shows a harmless warning for the skd driver:

drivers/block/skd_main.c:2959:1: error: ‘static’ is not at beginning of declaration [-Werror=old-style-declaration]

This changes the prototype to the expected formatting.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <axboe@fb.com>
      41c9499b
    • A
      skd: fix msix error handling · 3bc8492f
      由 Arnd Bergmann 提交于 
      As reported by gcc -Wmaybe-uninitialized, the cleanup path for
skd_acquire_msix tries to free the already allocated msi-x vectors
in reverse order, but the index variable may not have been
used yet:

drivers/block/skd_main.c: In function ‘skd_acquire_irq’:
drivers/block/skd_main.c:3890:8: error: ‘i’ may be used uninitialized in this function [-Werror=maybe-uninitialized]

This changes the failure path to skip releasing the interrupts
if we have not started requesting them yet.

Fixes: 180b0ae7 ("skd: use pci_alloc_irq_vectors")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>
      3bc8492f