Add BIST support for phy FFE (Feed forward equalizer) setting. The user can
configure FFE through the new debugfs interface.

FFE is a parameter used for link layer control. It will affect the link
quality between the SAS controller and the backplane. In the BIST test, the
FFE interface is provided to assist board testers in optimizing link
parameters.

The modification of the FFE parameter will affect the test after BIST or
the normal running of the board. The user should save the initial FFE
values and restore them after BIST test is complete.

Link: https://lore.kernel.org/r/1598958790-232272-6-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We use "phy_id" to identify phy in the BIST code but the rest of code
always uses "phy_no". Change it for consistency.

Link: https://lore.kernel.org/r/1598958790-232272-5-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When updating PROG_PHY_LINK_RATE to set linkrate for a phy we used a
hard-coded initial value instead of getting the current value from the
register. The assumption was that this register would not be modified, but
in fact it was partially modified in a new version of hardware. The
hard-coded value we used changed the default value of the register to a an
incorrect setting and as a result the SAS controller could not change
linkrate for the phy.

Delete hard-coded value and always read the latest value of register before
updating it.

Link: https://lore.kernel.org/r/1598958790-232272-4-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The macro for OOB phy linkrate is named CFG_PROG_PHY_LINK_RATE_* but that
is inaccurate. For clarification, include OOB in macro name.

Link: https://lore.kernel.org/r/1598958790-232272-3-git-send-email-john.garry@huawei.comSigned-off-by: NLuo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

hisi_sas_slot_task_free() attempts to dereference SSP task for non-ATA
tasks. If the task is SMP, the code may reference the wrong structure
although this may not cause any problems.

To avoid this, only access to SSP task when slot->n_elem_dif is not 0 which
indicates this is an SSP task.

Link: https://lore.kernel.org/r/1598958790-232272-2-git-send-email-john.garry@huawei.comSigned-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add 256GBit speed setting to the SCSI FC transport.  This speed can be
reached via FC trunking techniques.

Link: https://lore.kernel.org/r/20200831213518.48409-1-james.smart@broadcom.comReviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_rq_cmpl_frame_recv’:
drivers/scsi/fnic/fnic_fcs.c:840:15: warning: variable
‘eth_hdrs_stripped’ set but not used [-Wunused-but-set-variable]
  840 |  unsigned int eth_hdrs_stripped;
      |               ^~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-5-yanaijie@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_fcoe_send_vlan_req’:
drivers/scsi/fnic/fnic_fcs.c:379:6: warning: variable ‘fr_len’ set but
not used [-Wunused-but-set-variable]
  379 |  int fr_len;
      |      ^~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-4-yanaijie@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘is_fnic_fip_flogi_reject’:
drivers/scsi/fnic/fnic_fcs.c:317:9: warning: variable ‘els_len’ set but
not used [-Wunused-but-set-variable]
  317 |  size_t els_len = 0;
      |         ^~~~~~~
drivers/scsi/fnic/fnic_fcs.c:312:21: warning: variable ‘els_dtype’ set
but not used [-Wunused-but-set-variable]
  312 |  enum fip_desc_type els_dtype = 0;
      |                     ^~~~~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-3-yanaijie@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_main.c: In function ‘fnic_set_vlan’:
drivers/scsi/fnic/fnic_main.c:555:6: warning: variable ‘old_vlan’ set
but not used [-Wunused-but-set-variable]
  555 |  u16 old_vlan;
      |      ^~~~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-2-yanaijie@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The *else* branch of the *if* (base) statement in fdomain_isa_match() is
immediately followed by the *if* (!base) statement. Simplify the code by
removing the unneeded *if*.

Link: https://lore.kernel.org/r/df68e341-5113-4cf2-b64c-dc1ad0b686ac@omprussia.ruSigned-off-by: NSergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

A negative error code should be returned.

Link: https://lore.kernel.org/r/20200829075746.19166-1-tian.xianting@h3c.comAcked-by: NNilesh Javali <njavali@marvell.com>
Signed-off-by: NXianting Tian <tian.xianting@h3c.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use semicolons and braces.

Link: https://lore.kernel.org/r/be30bb0f24a5fb4f70ca8ed7027ca7555816a3fb.1598331149.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

PA Layer issues a LINERESET to the PHY at the recovery step in the Power
Mode change operation. If it happens during auto or manual hibern8 enter,
even if hibern8 enter succeeds, UFS power mode shall be set to PWM-G1 mode
and kept in that mode after exit from hibern8, leading to bad performance.
Handle the LINERESET in the eh_work by restoring power mode to HS mode
after all pending reqs and tasks are cleared from doorbell.

Link: https://lore.kernel.org/r/1598321228-21093-3-git-send-email-cang@codeaurora.orgSigned-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

To recover non-fatal errors, no full reset is required, err_handler only
clears those pending TRs/TMRs so that SCSI layer can re-issue them. In
current err_handler, TRs are directly cleared from UFS host's doorbell but
not aborted from device side. However, according to the UFSHCI JEDEC spec,
the host software shall use UTP Transfer Request List Clear Register to
clear a task from UFS host's doorbell only when a UTP Transfer Request is
expected to not be completed, e.g. when the host software receives a
“FUNCTION COMPLETE” Task Management response which means a Transfer Request
was aborted. To follow the UFSHCI JEDEC spec, in err_handler, abort one TR
before clearing it from doorbell.

Link: https://lore.kernel.org/r/1598321228-21093-2-git-send-email-cang@codeaurora.orgAcked-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update driver copyright.

Link: https://lore.kernel.org/r/159864896224.13630.9798419111015060967.stgit@brunhildaReviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Change Microsemi references to Microchip.

Link: https://lore.kernel.org/r/159864895592.13630.18113151805817361168.stgit@brunhildaReviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Change M entry e-mail to microchip.

Change L entry e-mail for storagedev to microchip.

Link: https://lore.kernel.org/r/159864510818.12656.822985017436862534.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add entry for Microchip.

Link: https://lore.kernel.org/r/159864166227.12131.3427629298809272795.stgit@brunhildaReviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This addresses the following gcc warning with "make W=1":

drivers/message/fusion/mptscsih.c: In function ‘mptscsih_IssueTaskMgmt’:
drivers/message/fusion/mptscsih.c:1519:17: warning: variable ‘timeleft’
set but not used [-Wunused-but-set-variable]
 1519 |  unsigned long  timeleft;
      |                 ^~~~~~~~

Link: https://lore.kernel.org/r/20200827125925.428357-1-yanaijie@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This addresses the following gcc warning with "make W=1":

drivers/scsi/isci/host.c: In function ‘sci_controller_complete_io’:
drivers/scsi/isci/host.c:2674:6: warning: variable ‘index’ set but not
used [-Wunused-but-set-variable]
 2674 |  u16 index;
      |      ^~~~~

Link: https://lore.kernel.org/r/20200827125851.428071-1-yanaijie@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This addresses the following gcc warning with "make W=1":

drivers/scsi/dpt_i2o.c: In function ‘adpt_slave_configure’:
drivers/scsi/dpt_i2o.c:411:12: warning: variable ‘pHba’ set but not used
[-Wunused-but-set-variable]
  411 |  adpt_hba* pHba;
      |            ^~~~

Link: https://lore.kernel.org/r/20200827125812.427753-1-yanaijie@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

kfree_skb() handles a NULL skb argument so the additional check is
unnecessary. Remove it.

Link: https://lore.kernel.org/r/20200827092606.32148-1-vulab@iscas.ac.cnSigned-off-by: NXu Wang <vulab@iscas.ac.cn>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix ufshcd_print_trs() to consider UFSHCD_QUIRK_PRDT_BYTE_GRAN when using
utp_transfer_req_desc::prd_table_length, so that it doesn't treat the
number of bytes as the number of entries.

Originally from Kiwoong Kim
(https://lkml.kernel.org/r/20200218233115.8185-1-kwmad.kim@samsung.com).

Link: https://lore.kernel.org/r/20200826021040.152148-1-ebiggers@kernel.org
Fixes: 26f968d7 ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk")
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This fallthrough annotation is unreachable so we can delete it.

Link: https://lore.kernel.org/r/20200825112003.GD285523@mwanda
Fixes: c4e2fbca ("scsi: aacraid: Reworked scsi command submission path")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Implement 'flat space LUN addressing', which allows us to raise the max_lun
limitation to 16384. The maximum number of LUNs prior to this patch was
256.

Link: https://lore.kernel.org/r/20200821042249.5097-1-dgilbert@interlog.comSuggested-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

For Exynos, flush during hibern8 is sufficient. Manual flush will cause an
increase in power usage.

Link: https://lore.kernel.org/r/ef94af8f273316d50d7f50a0cac9c7be9b9316a1.1598319701.git.kwmad.kim@samsung.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NKiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We have two knobs to control flush for write booster,
fWriteBoosterBufferFlushDuringHibernate and fWriteBoosterBufferFlushEn.

Some vendors use only fWriteBoosterBufferFlushDuringHibernate because this
can reportedly cover most scenarios. Also, there have been some reports
that flush by fWriteBoosterBufferFlushEn could lead to increased power
consumption thanks to unexpected internal operations. Consequently, we need
a way to enable or disable fWriteBoosterEn operations. Add quirk to bypass
manual flush.

Link: https://lore.kernel.org/r/ffdb0eda30515809f0ad9ee936b26917ee9b4593.1598319701.git.kwmad.kim@samsung.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NKiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In a number of places in esas2r_ioctl.c, the void* returned from
pci_alloc_consistent() is cast unnecessarily. Remove casts.

Issue identified with Coccinelle.

Link: https://lore.kernel.org/r/20200820181411.866057-1-alex.dewar90@gmail.comSigned-off-by: NAlex Dewar <alex.dewar90@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

On an error exit path, a negative error code should be returned instead of
a positive return value.

Link: https://lore.kernel.org/r/20200802111531.5065-1-tianjia.zhang@linux.alibaba.com
Fixes: f40e74ff ("csiostor:firmware upgrade fix")
Cc: Praveen Madhavan <praveenm@chelsio.com>
Signed-off-by: NTianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

On an error exit path, a negative error code should be returned instead of
a positive return value.

Link: https://lore.kernel.org/r/20200802111530.5020-1-tianjia.zhang@linux.alibaba.com
Fixes: 8777e431 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine")
Cc: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: NTianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In the case of a failed retry, a positive value EIO is returned here.  I
think this is a typo error. It is necessary to return an error value.

[mkp: caller checks != 0 but the rest of the file uses -Exxx so fix this up
to be consistent]

Link: https://lore.kernel.org/r/20200802111528.4974-1-tianjia.zhang@linux.alibaba.com
Fixes: 0691094f ("scsi: qla2xxx: Add logic to detect ABTS hang and response completion")
Cc: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: NTianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The initialization value of `rc` is wrong. It is unnecessary to initialize
`rc` variables, so remove its initialization operation.

Link: https://lore.kernel.org/r/20200802111527.4928-1-tianjia.zhang@linux.alibaba.com
Fixes: 84905dfe ("scsi: qla2xxx: Fix TMF and Multi-Queue config")
Cc: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: NTianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

ahc_linux_queue_recovery_cmd returns SUCCESS(0x2002) or FAIL(0x2003), but
the caller is checking error case using != 0.

Link: https://lore.kernel.org/r/20200816070242.978839-1-ztong0001@gmail.comSigned-off-by: NTong Zhang <ztong0001@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There is a spelling mistake in an error message. Fix it.

Link: https://lore.kernel.org/r/20200810101238.61787-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There are spelling mistakes in two comments and a csio_err error
message. Fix these.

Link: https://lore.kernel.org/r/20200810090843.49553-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There are spelling mistakes in various printk messages. Fix these.

Link: https://lore.kernel.org/r/20200810085057.49039-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There are two different spelling mistakes of "Queueing" in error and debug
messages. Fix these.

Link: https://lore.kernel.org/r/20200810080745.47314-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.

[mkp: removed memset() hunk that has already been addressed]

Link: https://lore.kernel.org/r/20200802110721.677707-1-christophe.jaillet@wanadoo.fr
Fixes: 4161cee5 ("[SCSI] qla4xxx: Add host statistics support")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.

Link: https://lore.kernel.org/r/20200802101527.676054-1-christophe.jaillet@wanadoo.fr
Fixes: 4161cee5 ("[SCSI] qla4xxx: Add host statistics support")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>