Not needed any more.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

RLC #53815 ucode has the noise issue on 4k playback while gfxoff enabled.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NTom St Denis <tom.stdenis@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch enables gfxoff and stutter mode again, since we take more testing on
raven series. For raven2 and picasso, we can enable it directly. And for raven,
we need check the RLC/SMC ucode version cannot be less than #531/0x1e45.

v2: add smc version checking for raven.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Tested-by: Likun Gao <Likun.Gao@amd.com> (v2)
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is a spelling mistake in pr_warn message; fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When building with -Wsometimes-uninitialized, Clang warns:

drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:456:2: warning:
variable 'num_of_levels' is used uninitialized whenever '?:' condition
is false [-Wsometimes-uninitialized]
        smu_read_smc_arg(smu, &num_of_levels);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/inc/amdgpu_smu.h:608:3: note:
expanded from macro 'smu_read_smc_arg'
        ((smu)->funcs->read_smc_arg? (smu)->funcs->read_smc_arg((smu), (arg)) : 0)
         ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:457:7: note:
uninitialized use occurs here
        if (!num_of_levels) {
             ^~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:456:2: note: remove
the '?:' if its condition is always true
        smu_read_smc_arg(smu, &num_of_levels);
        ^
drivers/gpu/drm/amd/amdgpu/../powerplay/inc/amdgpu_smu.h:608:3: note:
expanded from macro 'smu_read_smc_arg'
        ((smu)->funcs->read_smc_arg? (smu)->funcs->read_smc_arg((smu), (arg)) : 0)
         ^
drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:446:27: note:
initialize the variable 'num_of_levels' to silence this warning
        uint32_t i, num_of_levels, clk;
                                 ^
                                  = 0
1 warning generated.

The if statement it mentions as potentially problematic is currently
always true because the read_smc_arg callback is assigned at the
bottom of this file but Clang can't tell that. If the callback were
ever to disappear, num_of_levels would never be initialized. Just
zero initialize it to ensure that the intent behind this code
remains the same.

Link: https://github.com/ClangBuiltLinux/linux/issues/425Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_move_vram_ram':
drivers/gpu/drm/radeon/radeon_ttm.c:254:24: warning:
 variable 'rdev' set but not used [-Wunused-but-set-variable]

drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_move_ram_vram':
drivers/gpu/drm/radeon/radeon_ttm.c:301:24: warning:
 variable 'rdev' set but not used [-Wunused-but-set-variable]

It's not used since a987fcaa ("ttm: Make parts of a struct ttm_bo_device
global.")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We want DRM planes to be initialized in the following order:

- primary planes
- overlay planes
- cursor planes

to support existing userspace expectations for plane z-ordering. This
means that we also need to register CRTCs after all planes have been
initialized since overlay planes can be placed on any CRTC.

So the only reason why we have the mode_info->planes list is to
remember the primary planes for use later when we need to register
the CRTC.

Overlay planes have no purpose being in this list. DRM will cleanup
any planes that we've registered for us, so the only planes that need to
be explicitly cleaned up are the ones that have failed to register.

By dropping the explicit free on every plane in the mode_info->planes
list this patch also fixes a double-free in the case where we fail to
initialize only some of the planes.

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need arbitrary read/write over DP AUX DPCD
for debugging

[How]
Three debugfs entries

Set the target address by writing to
"aux_dpcd_address"
(The first four bytes written are used)

Set the transaction size in bytes by writing to
"aux_dpcd_size"
(The first four bytes written are used)

Start a transaction by reading/writing
"aux_dpcd_data"

Do note: there is no concerrency protection at all
Accessing these entries in quick succession can lead
to strange behaviour
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need to add DP SDP message test debugfs to make sdp message test
more convenient and efficient.

[How]
Add sdp_message debugfs entry in amdgpu.
Signed-off-by: NLeo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need to add DP SDP message test debugfs to make sdp message test
more convenient and efficient.

[How]
Add a DM accessible SDP interface for custom data.
Signed-off-by: NLeo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are issues removing surfaces/streams when odm is active.
This is a step to fix that
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

A number of places opp programming was missing for odm second pipe.
This change fixes the oversight.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We fail to reset the second odm combine pipe. This change fixes
odm pointer management.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Releasing planes should not release the 2nd odm pipe right away,
this change leaves us with 2 pipes with null planes and same stream
when planes are released during odm.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Refactor setting bit fields. Correcting the offset of MD0.
Initializing the InfoPacket header fields. Defining the field offsets
and masks.
Signed-off-by: NReza Amini <Reza.Amini@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In certain cases we do link training when we don't have a backend.

[How]
In dc_link_set_preferred_link_settings(), store preferred link settings
first and then verify that the link is DP and the link stream's backend is
enabled.  If either is false, then we will not do any link retraining.
Signed-off-by: NSamson Tam <Samson.Tam@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add these interfacese for future use
setup_global_lock()
lock_global()
pipe_control_lock_global()
Signed-off-by: NWenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: NNevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Currently we are missing a few checks to see if HDR10 is allowed.
In particular we never check for the extended colorimetry bit (whether its
present or set to 1). Further we don't read in the dpcd block in DC that
would provide these bits.

[How]
- Added in DC code to read in the block containing the extended colorimetry
bit.
Signed-off-by: NHarmanprit Tatla <Harmanprit.Tatla@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Somewhere in the atomic check reshuffle ABM got lost.
ABM is a crtc property (copied from a connector property).
It can change without a modeset, just like underscan.

[How]
In the skip_modeset branch of atomic check crtc updates,
copy over the abm property.
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In HDMI plugfest, MTK report our EMP with VRR_EN bit = 0.
VRR_EN bit is EMP-MD0-bit 0. Currently driver set 1 to bit 3.

[How]
Programming correct VRR_EN bit in EMP-MD0-bit0.
Signed-off-by: NHugo Hu <hugo.hu@amd.com>
Reviewed-by: NReza Amini <Reza.Amini@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
There exist displays with EDIDs > 512 bytes, existing code
will cause us to ignore all extension blocks.
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Audio was unmuted for HDMI only, need to do so for DP as well.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Reviewed-by: NEric Bernstein <Eric.Bernstein@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Flickering is observed on some displays when the number of inserted BTR
frames changes frequently.

[How]
Add in a margin of drift to prevent the inserted number of frames from
jumping around too frequently.
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
when programming VID_TIMING, we were using the original VESA timing for DP_VIDM/N.
for YCbCr420 or compressed YCbCr422, using half rate as  YCbCr444.
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NNikola Cornij <Nikola.Cornij@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Need to set VID_N_MUL for 4:2:0 cases

[How]
Move setting to enc1_stream_encoder_dp_unblank and
ensure it is also set for non-4:2:0 cases.
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move out of header to dc_helper.c, in preparation for future
implementations.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To help prevent plane state not being set to the correct default
value if any new properties are added in the future.

[How]
Use the drm helper - which seems to be the common solution among other
DRM drivers.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

we were only checking the return value in one place, thus changing
generic_reg_wait from int to void and reading the register instead of
getting it from generic_reg_wait, when we need the return value.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The plane_reset callback is subclassed but hasn't been updated since
the drm helper got updated to include resetting alpha related state
(state->alpha and state->pixel_blend_mode). The overlay planes
exposed by amdgpu_dm were therefore being rendered as invisible by
default ever since supported was exposed for alpha blending properties
on overlays.

This caused regressions in igt@kms_plane_multiple@atomic-tiling-none
and igt@kms_plane@plane-position-covered-pipe tests.

[How]
Reset the plane state values to their correct values as defined in
the drm helper.

This fixes the IGT test regression.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To aid recoverable page faults.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need the first paging queue to handle page faults.

v2: handle any number of SDMA instances gracefully
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that we have re-reoute faults to the other IH
ring we can enable retries again.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add amdgpu_amdkfd_pre_reset and amdgpu_amdkfd_post_reset inside amdgpu_device_reset_sriov.
Signed-off-by: NWentao Lou <Wentao.Lou@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Incorrect hardcoded assumptions are made regarding luma and chroma
alignment. The actual values set for the DRM framebuffer should be used
when programming the address.

[How]
Respect the given pitch for both luma and chroma planes - it's not like
we can force the alignment to anything else at this point anyway.

Use the FB offset for the chroma planes directly. DRM already
provides this to us so there's no need to calculate it manually.

While we don't actually use the chroma surface size parameters on Raven,
these should have technically been fb->width / 2 and fb->height / 2
since the chroma plane is half size of the luma plane for NV12.

Leave a TODO indicating that those should be set based on the actual
surface format instead since this is only correct for YUV420 formats.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When page table are updated by the CPU, synchronize with the
allocation and initialization of newly allocated page tables.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If using old kernel config file, CONFIG_ZONE_DEVICE is not selected,
so CONFIG_HMM and CONFIG_HMM_MIRROR is not enabled, the current driver
error message "Failed to register MMU notifier" is not clear. Inform
user with more descriptive message on how to fix the missing kernel
config option.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109808Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

userptr may cross two VMAs if the forked child process (not call exec
after fork) malloc buffer, then free it, and then malloc larger size
buf, kerenl will create new VMA adjacent to old VMA which was cloned
from parent process, some pages of userptr are in the first VMA, the
rest pages are in the second VMA.

HMM expects range only have one VMA, loop over all VMAs in the address
range, create multiple ranges to handle this case. See
is_mergeable_anon_vma in mm/mmap.c for details.
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>