Use xfs_verify_magic to check the magic numbers of inodes.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

With the verifier magic value helper in place, we've left a bit more
duplicate code across the verifiers that involve struct
xfs_da3_blkinfo. This includes the da node, xattr leaf and dir leaf
verifiers, all of which perform similar checks for v4 and v5
filesystems.

Create a common helper to verify an xfs_da3_blkinfo structure,
taking care to only access v5 fields where appropriate, and refactor
the aforementioned verifiers to use the helper. No functional
changes.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Most buffer verifiers have hardcoded magic value checks
conditionalized on the version of the filesystem. The magic value
field of the verifier structure facilitates abstraction of some of
this code. Populate the ->magic field of various verifiers to take
advantage of this abstraction. No functional changes.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The dir2 leaf verifiers share the same underlying structure
verification code, but implement six accessor functions to multiplex
the code across the two verifiers. Further, the magic value isn't
sufficiently abstracted such that the common helper has to manually
fix up the magic from the caller on v5 filesystems.

Use the magic field in the verifier structure to eliminate the
duplicate code and clean this all up. No functional change.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The allocation btree verifiers share code that is unable to detect
cross-tree magic value corruptions such as a bnobt block with a
cntbt magic value. Populate the b_ops->magic field of the associated
verifier structures such that the structure verifier can check the
magic value against the expected value based on tree type.

The btree level check requires knowledge of the tree type to
determine the appropriate maximum value. This was previously part of
the hardcoded magic value checks. With that code removed, peek at
the first magic value in the verifier to determine the expected tree
type of the current block.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Similar to the inode btree verifier, the same allocation btree
verifier structure is shared between the by-bno (bnobt) and by-size
(cntbt) btrees. This prevents the ability to distinguish magic
values between them. Separate the verifier into two, one for each
tree, and assign them appropriately. No functional changes.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The inode btree verifier code is shared between the inode btree and
free inode btree because the underlying metadata formats are
essentially equivalent. A side effect of this is that the verifier
cannot determine whether a particular btree block should have an
inobt or finobt magic value.

This logic allows an unfortunate xfs_repair bug to escape detection
where certain level > 0 nodes of the finobt are stamped with inobt
magic by xfs_repair finobt reconstruction. This is fortunately not a
severe problem since the inode btree magic values do not contribute
to any changes in kernel behavior, but we do need a means to detect
and prevent this problem in the future.

Add a field to xfs_buf_ops to store the v4 and v5 superblock magic
values expected by a particular verifier. Add a helper to check an
on-disk magic value against the value expected by the verifier. Call
the helper from the shared [f]inobt verifier code for magic value
verification. This ensures that the inode btree blocks each have the
appropriate magic value based on specific tree type and superblock
version.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The inobt verifier is reused for the inobt and finobt, which
prevents the ability to distinguish between magic values on a
per-tree basis. Create a separate finobt structure in preparation
for changes to enforce the appropriate magic value for the
associated tree. This patch has no functional change.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Most verifiers that check on-disk magic values convert the CPU
endian magic value constant to disk endian to facilitate compile
time optimization of the byte swap and reduce the need for runtime
byte swaps in buffer verifiers. Several buffer verifiers do not
follow this pattern. Update those verifiers for consistency.

Also fix up a random typo in the inode readahead verifier name.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Improve the documentation around xfs_buf_ensure_ops, which is the
function that is responsible for cleaning up the b_ops state of buffers
that go through xrep_findroot_block but don't match anything.  Rename
the function to xfs_buf_reverify.

[darrick: this started off as bfoster mods of a previous patch of mine,
but the renaming part is now this separate patch.]
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NBrian Foster <bfoster@redhat.com>

Use a rhashtable to cache the unlinked list incore.  This should speed
up unlinked processing considerably when there are a lot of inodes on
the unlinked list because iunlink_remove no longer has to traverse an
entire bucket list to find which inode points to the one being removed.

The incore list structure records "X.next_unlinked = Y" relations, with
the rhashtable using Y to index the records.  This makes finding the
inode X that points to a inode Y very quick.  If our cache fails to find
anything we can always fall back on the old method.

FWIW this drastically reduces the amount of time it takes to remove
inodes from the unlinked list.  I wrote a program to open a lot of
O_TMPFILE files and then close them in the same order, which takes
a very long time if we have to traverse the unlinked lists.  With the
ptach, I see:

+ /d/t/tmpfile/tmpfile
Opened 193531 files in 6.33s.
Closed 193531 files in 5.86s

real    0m12.192s
user    0m0.064s
sys     0m11.619s
+ cd /
+ umount /mnt

real    0m0.050s
user    0m0.004s
sys     0m0.030s

And without the patch:

+ /d/t/tmpfile/tmpfile
Opened 193588 files in 6.35s.
Closed 193588 files in 751.61s

real    12m38.853s
user    0m0.084s
sys     12m34.470s
+ cd /
+ umount /mnt

real    0m0.086s
user    0m0.000s
sys     0m0.060s
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Add tracepoints so we can associate high level operations with low level
updates.  No functional changes.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

In xfs_iunlink_remove we have two identical calls to
xfs_iunlink_update_inode, so move it out of the if statement to simplify
the code some more.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

There's a loop that searches an unlinked bucket list to find the inode
that points to a given inode.  Hoist this into a separate function;
later we'll use our iunlink backref cache to bypass the slow list
operation.  No functional changes.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Hoist the functions that update an inode's unlinked pointer updates into
a helper.  No functional changes.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Strengthen our checking of the AGI unlinked pointers when we start to
use them for updating the metadata.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Split the AGI unlinked bucket updates into a separate function.  No
functional changes.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Add a new helper to check that a per-AG inode pointer is either null or
points somewhere valid within that AG.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Fix some indentation issues with the iunlink functions and reorganize
the tops of the functions to be identical.  No functional changes.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The writeback delalloc conversion code is racy with respect to
changes in the currently cached file mapping outside of the current
page. This is because the ilock is cycled between the time the
caller originally looked up the mapping and across each real
allocation of the provided file range. This code has collected
various hacks over the years to help combat the symptoms of these
races (i.e., truncate race detection, allocation into hole
detection, etc.), but none address the fundamental problem that the
imap may not be valid at allocation time.

Rather than continue to use race detection hacks, update writeback
delalloc conversion to a model that explicitly converts the delalloc
extent backing the current file offset being processed. The current
file offset is the only block we can trust to remain once the ilock
is dropped because any operation that can remove the block
(truncate, hole punch, etc.) must flush and discard pagecache pages
first.

Modify xfs_iomap_write_allocate() to use the xfs_bmapi_delalloc()
mechanism to request allocation of the entire delalloc extent
backing the current offset instead of assuming the extent passed by
the caller is unchanged. Record the range specified by the caller
and apply it to the resulting allocated extent so previous checks by
the caller for COW fork overlap are not lost. Finally, overload the
bmapi delalloc flag with the range reval flag behavior since this is
the only use case for both.

This ensures that writeback always picks up the correct
and current extent associated with the page, regardless of races
with other extent modifying operations. If operating on a data fork
and the COW overlap state has changed since the ilock was cycled,
the caller revalidates against the COW fork sequence number before
using the imap for the next block.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The writeback delalloc conversion code is racy with respect to
changes in the currently cached file mapping. This stems from the
fact that the bmapi allocation code requires a file range to
allocate and the writeback conversion code assumes the range of the
currently cached mapping is still valid with respect to the fork. It
may not be valid, however, because the ilock is cycled (potentially
multiple times) between the time the cached mapping was populated
and the delalloc conversion occurs.

To facilitate a solution to this problem, create a new
xfs_bmapi_delalloc() wrapper to xfs_bmapi_write() that takes a file
(FSB) offset and attempts to allocate whatever delalloc extent backs
the offset. Use a new bmapi flag to cause xfs_bmapi_write() to set
the range based on the extent backing the bno parameter unless bno
lands in a hole. If bno does land in a hole, fall back to the
current behavior (which may result in an error or quietly skipping
holes in the specified range depending on other parameters). This
patch does not change behavior.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Now that the cached writeback mapping is explicitly invalidated on
data fork changes, the EOF trimming band-aid is no longer necessary.
Remove xfs_trim_extent_eof() as well since it has no other users.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The writeback code caches the current extent mapping across multiple
xfs_do_writepage() calls to avoid repeated lookups for sequential
pages backed by the same extent. This is known to be slightly racy
with extent fork changes in certain difficult to reproduce
scenarios. The cached extent is trimmed to within EOF to help avoid
the most common vector for this problem via speculative
preallocation management, but this is a band-aid that does not
address the fundamental problem.

Now that we have an xfs_ifork sequence counter mechanism used to
facilitate COW writeback, we can use the same mechanism to validate
consistency between the data fork and cached writeback mappings. On
its face, this is somewhat of a big hammer approach because any
change to the data fork invalidates any mapping currently cached by
a writeback in progress regardless of whether the data fork change
overlaps with the range under writeback. In practice, however, the
impact of this approach is minimal in most cases.

First, data fork changes (delayed allocations) caused by sustained
sequential buffered writes are amortized across speculative
preallocations. This means that a cached mapping won't be
invalidated by each buffered write of a common file copy workload,
but rather only on less frequent allocation events. Second, the
extent tree is always entirely in-core so an additional lookup of a
usable extent mostly costs a shared ilock cycle and in-memory tree
lookup. This means that a cached mapping reval is relatively cheap
compared to the I/O itself. Third, spurious invalidations don't
impact ioend construction. This means that even if the same extent
is revalidated multiple times across multiple writepage instances,
we still construct and submit the same size ioend (and bio) if the
blocks are physically contiguous.

Update struct xfs_writepage_ctx with a new field to hold the
sequence number of the data fork associated with the currently
cached mapping. Check the wpc seqno against the data fork when the
mapping is validated and reestablish the mapping whenever the fork
has changed since the mapping was cached. This ensures that
writeback always uses a valid extent mapping and thus prevents lost
writebacks and stale delalloc block problems.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The sequence counter in the xfs_ifork structure is only updated on
COW forks. This is because the counter is currently only used to
optimize out repetitive COW fork checks at writeback time.

Tweak the extent code to update the seq counter regardless of the
fork type in preparation for using this counter on data forks as
well.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Currently we have a few PTAGs in place allowing us to transform a filesystem
error in a BUG() call.  However, we don't have a panic tag for corrupt
metadata, so introduce XFS_PTAG_VERIFIER_ERROR so that the administrator can
use the fs.xfs.panic_mask sysctl knob to convert any error detected by buffer
verifiers into a kernel panic.
Signed-off-by: NMarco Benatto <mbenatto@redhat.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
[darrick: light editing of commit message]
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Remove duplicated include.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Check extended attribute entry names for invalid characters.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Check directory entry names for invalid characters.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Fix an off-by-one error in the realtime bitmap "is used" cross-reference
helper function if the realtime extent size is a single block.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Teach scrub to flag extent maps that exceed the range that can be mapped
with a xfs_dablk_t.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

The extended attribute scrubber should abort the "read all attrs" loop
if there's a fatal signal pending on the process.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Move all the confusing dinode mapping code that's split between
xchk_iallocbt_check_cluster and xchk_iallocbt_check_cluster_ifree into
the first function so that it's clearer how we find the dinode for a
given inode.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Teach scrub how to handle the case that there are one or more inobt
records covering a given inode cluster.  This fixes the operation on big
block filesystems (e.g. 64k blocks, 512 byte inodes).
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

The code to check inobt records against inode clusters is a mess of
poorly named variables and unnecessary parameters.  Clean the
unnecessary inode number parameters out of _check_cluster_freemask in
favor of computing them inside the function instead of making the caller
do it.  In xchk_iallocbt_check_cluster, rename the variables to make it
more obvious just what chunk_ino and cluster_ino represent.

Add a tracepoint to make it easier to track each inode cluster as we
scrub it.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Hoist the inode cluster checks out of the inobt record check loop into
a separate function in preparation for refactoring of that loop.  No
functional changes here; that's in the next patch.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

On a big block filesystem, there may be multiple inobt records covering
a single inode cluster.  These records obviously won't be aligned to
cluster alignment rules, and they must cover the entire cluster.  Teach
scrub to check for these things.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

In xchk_iallocbt_rec, check the alignment of ir_startino by converting
the inode cluster block alignment into units of inodes instead of the
other way around (converting ir_startino to blocks).  This prevents us
from tripping over off-by-one errors in ir_startino which are obscured
by the inode -> block conversion.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Make sure we never check more than XFS_INODES_PER_CHUNK inodes for any
given inobt record since there can be more than one inobt record mapped
to an inode cluster.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

If the parameter 'count' is non-zero, nfsd4_clone_file_range() will
currently clobber all errors returned by vfs_clone_file_range() and
replace them with EINVAL.

Fixes: 42ec3d4c ("vfs: make remap_file_range functions take and...")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

When something let __find_get_block_slow() hit all_mapped path, it calls
printk() for 100+ times per a second. But there is no need to print same
message with such high frequency; it is just asking for stall warning, or
at least bloating log files.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.873324][T15342] b_state=0x00000029, b_size=512
  [  399.878403][T15342] device loop0 blocksize: 4096
  [  399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.890400][T15342] b_state=0x00000029, b_size=512
  [  399.895595][T15342] device loop0 blocksize: 4096
  [  399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.907471][T15342] b_state=0x00000029, b_size=512
  [  399.912506][T15342] device loop0 blocksize: 4096

This patch reduces frequency to up to once per a second, in addition to
concatenating three lines into one.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>