- 10 8月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add documentation about the autodetection of the VIA codec models to avoid the false impression that they are not supported. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 6月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
Also update the documentation. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 6月, 2010 1 次提交
-
-
Lenovo IdeaPad Y430 has an additional subwoofer connected at pin 0x1b, which isn't muted when headphone is plugged in. This adds additional support to the extra subwoofer via new ideapad model. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 2月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 2月, 2010 1 次提交
-
-
由 Luke Yelavich 提交于
BugLink: https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/343989 Add a model quirk for the NVIDIA based Macmini hardware, aka Macmini 3,1. The pinout is almost identical to the mb5 quirk, except for no microphone and the line-in mixer controls being on a different index. Everything works in 2ch mode, but as I am not sure what needs to be changed for 6ch mode, or whether the Mac Mini's chip supports 6ch mode, I have simply duplicated the code from the mb5 quirk for the mac mini chmode management. The new model parameter for this quirk is "macmini3". Signed-off-by: NLuke Yelavich <luke.yelavich@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 2月, 2010 1 次提交
-
-
由 Greg Alexander 提交于
Add patch for the Conexant 5066 HDA codec to support the Lenovo IdeaPad U150 Signed-off-by: NGreg Alexander <greigs@galexander.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 1月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Added the support for Toshiba Satellite M300 with Conexant 5051 codec. Since the laptop has no port C connection and the pin reports always the jack sense true, we need to ignore port-C unsol event. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Minor fixes for HP Compaq Presario F700 quirks with Cxt5051 codec: - changed the capture mixer elements to the standard name. - fixed the quirk name string without a space - sorted the quirk list - updated the documentation Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 12月, 2009 1 次提交
-
-
With the attached patch I am able to use the sound on a new IMac 27. What works: *) Internal speakers *) Internal microphone *) Headphone I don't have an external mic or a SPDIF device to test the rest. Signed-off-by: NRafael Avila de Espindola <rafael.espindola@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 12月, 2009 1 次提交
-
-
由 Justin P. Mattock 提交于
This is an updated patch for the Apple iMac 9,1 model to add sound. Original patch posted here: http://article.gmane.org/gmane.linux.alsa.devel/61361/match= I have been using this patch for a while now and have to say it works vary well, except for a few minor things: With the iMac 24-inch 3.06GHz Intel Core 2 Duo everything seems to be working as it should, although I have not looked into the microphone (never really use one, nor have any apps to test, my guess is it doesn't work, or I never figured out how to get it to work). With the iMac 24-inch 2.66GHz Intel Core 2 Duo everything is the same as with the above machine except I'm hearing a light scratchy/distortion noise come out of the speakers when using headphones(above machine does not do this). Other than that the sound level is great(especially with good Dj headphones). Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Tested-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 11月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The mute-LED isn't synchronized with the actual mute state on some HP laptops with IDT 92HD83xxx codecs. A similar hack using check_power_status callback is added for this codec, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 10月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
On FSC laptops, the sound gets muted gradually when the volume is chnaged. This is due to the wrong volume-knob widget setup. The delta bit (bit 7) shouldn't be set for these devices. This patch adds a new quirk to set the value 0x7f to the widget 0x24 instead of 0xff. Reference: Novell bnc#546006 http://bugzilla.novell.com/show_bug.cgi?id=546006Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 9月, 2009 1 次提交
-
-
由 Miguel de Barros 提交于
Reference: ALSA bug #0004614 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4614 port-A (0x11) - front hp-out port-D (0x12) - rear line out port-E (0x1c) - front mic-in port-F (0x16) - Internal speakers digital-mic (0x17) - Internal mic init verbs, mixers, jack sensing and PCI_QUIRK to support this hardware Signed-off-by: NMiguel de Barros <miguel.de.barros@bluewin.ch> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 9月, 2009 1 次提交
-
-
由 Uwe Kleine-Koenig 提交于
Signed-off-by: NUwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 9月, 2009 1 次提交
-
-
由 ddiaz@cenditel.gob.ve 提交于
The model clevo-m540r was created with 6-channel and digital support. All functions verified except spdif. Tested with a VIT D2000 laptop which has: [lspci extract] Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) Subsystem: CLEVO/KAPOK Computer Device [1558:5409] [/proc/asound/card0/codec\#0 header] Codec: Realtek ALC883 Address: 0 Function Id: 0x1 Vendor Id: 0x10ec0883 Subsystem Id: 0x15585409 Revision Id: 0x100002 [Added a comment about HP mute and the model description by tiwai] Signed-off-by: NDhionel Diaz <ddiaz@cenditel.gob.ve> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 9月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added the quirk for Alienware M17x with IDT 92HD73* codec chip. It has two HP and one line-out jack, one mic jack, a built-in speaker and a built-in mic. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 8月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Add the default pin configs for MBP55. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 6月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Merge patch_alc882() and patch_alc883() to the former one since both codecs have fairly similar connections but just a slight difference. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 6月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Samsung P50 requires the HP auto-muting unlike other Samsung models. Added a new model=samsung-p50 to support this. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 6月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Add the new model string corresponding to the previous Acer Aspire 6530G support. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 6月, 2009 1 次提交
-
-
由 David Heidelberger 提交于
Added 7.1 support for MSI GX620 and jack quirk. Reference: kernel bug#13430 http://bugzilla.kernel.org/show_bug.cgi?id=13430Signed-off-by: NDavid Heidelberger <d.okias@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 6月, 2009 1 次提交
-
-
由 Guido Günther 提交于
with BIOS probing only we offer a non functional headphone swith and volume slider. Signed-off-by: NGuido Günther <agx@sigxcpu.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 6月, 2009 1 次提交
-
-
由 Hector Martin 提交于
Short story: this laptop has 5.1 built-in speakers which you *really* want to use (the not-so-"sub" woofer is what makes the audio above average for a laptop), so 6-channel support is important (plus a decent asound.conf to upmix stereo). It also has the 3 typical jacks that ought to have a selectable mode. And it's based on ALC889, which sucks. Rationale/explanations: The const_channel_count stuff was added because, for a laptop like this, you always have 6 channels available (internal speakers) but still need to set the mode for the 3 external jacks. Therefore, the device always needs to be in 6-channel mode but there still needs to be a mixer control for the jack mode. You could use line/mic-in at the same time as the 6 internal speakers, for example. You might be tempted to make it even smarter by dynamically switching the max channel count when headphones are plugged in (therefore muting the internal speakers and reducing the physical channel count to the jack channel mode), but as a user I consider this to be harmful because I want the audio to blow up to 6 channels / upmixed as soon as I unplug the headphones, and having opened the device while in 2-channel mode would prevent this from working (and always making 6-channel mode available doesn't do any harm). The hardware needs EAPD turned on and the DACs routed to the internal speaker pins, so the patch adds those verbs. The ALC889 CLFE and subsequent (side/aux, here unused) DACs do NOT work by default, at least here. I wasted much time trying to talk to Realtek/pshou about this, but they just kept sending me useless updates to patch_realtek.c that did nothing relevant. In the end I gave up and brute forced the issue by trying to flip every bit in the proprietary coefficient registers, and eventually found the two magic registers that need to be cleared to enable all DACs. I have only heard Acer users complain, but that might be because ALC889 is pretty new and using 5.1 (and noticing the missing center/lfe channels) might not be that common. If this is a generalized issue with all ALC889 systems then those verbs should probably be moved to a common verb array. The internal mic is untested and probably doesn't work. These settings will probably work for other Acer Gemstone laptops with the same 5.1 speaker config. When identified, those should be added to the PCI subsystem ID list. Signed-off-by: NHector Martin <hector@marcansoft.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The recent fix for the headphone volume control on IDT/STAC codecs resulted in the removal of invalid "Side" volume eventually. But, if the front panel doesn't exist, this setup could be regarded as a sort of regression, as reported in kernel bug #13250. Now as a workaround, a new model 5stack-no-fp is added so that the user without the front panel can choose this one explicitly. Reference: bko#13250 http://bugzilla.kernel.org/show_bug.cgi?id=13250Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 5月, 2009 1 次提交
-
-
由 Torben Schulz 提交于
This patch adds support for MacBook 3,1 sound by adding a model new "mb31" with the appropriate init verbs, mixers and channel modes to the ALC883 configuration. patch_alc882() and patch_alc883() are modified to handle the MacBook 3,1 sound-chip (Realtek ALC889A) correctly. Signed-off-by: NTorben Schulz <public@letorbi.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 5月, 2009 1 次提交
-
-
由 Chris Pockelé 提交于
Add specific configuration for Samsung NC10 mini notebook. Internal mic/speakers will be correctly muted when plugging in external ones. Mixer controls are added for speakers, headphones and PC beep. "Boost" is added for the microphones. Signed-off-by: NChris Pockelé <chris.pockele.f1@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added the missing descriptions and the model names for Realtek codecs to the documentation and the config table. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 5月, 2009 1 次提交
-
-
由 James Gardiner 提交于
Signed-off-by: NJames Gardiner <renidragsemaj@yahoo.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Add the default pin config for model=vaio (in case of broken BIOS). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Fix the mic input of HP dv6736 with Conexant 5051 codec chip. This laptop seems have no mic-switching per jack connection. A new model hp-dv6736 is introduced to match with the h/w implementation. Reference: Novell bnc#480753 https://bugzilla.novell.com/show_bug.cgi?id=480753Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added the model=auto to STAC/IDT codecs to use the BIOS default setup explicitly. It can be used to disable the device-specific model quirk in the driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 2月, 2009 1 次提交
-
-
Currently the HP connector on X200 dock doesn't detect when a HP is connected nor allows sound to be played using it. This patch fixes the problem by adding a quirk for this specific model. It's possible that others have the same NID (0x19) to report when dock HP is connected, but I don't have access to any. Please Cc me in the reply since I'm not subscribed to alsa-devel@. Signed-off-by: NAristeu Rozanski <aris@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 2月, 2009 1 次提交
-
-
由 Tony Vroon 提交于
As just pointed out to me, the new tyan model for ALC262 was implemented but not documented. This adds the board to the list, using both its marketing name (Thunder n6650W) and its model number (S2915-E). Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 1月, 2009 2 次提交
-
-
由 Matthew Ranostay 提交于
Some revisions of the 92hd8xxx codec's not supporting port power downs in which the using of it causes capture and also randomly playback streams to not function at all. Thus by disabling it by default and adding a option to enable it manually will fix all issue on current and future revisions. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Gateway T1616 laptop needs EAPD always on while the current STAC9205 code turns off per HP plug. Added a new model "eapd" to keep it on. Reference: Novell bnc#467597 https://bugzilla.novell.com/show_bug.cgi?id=467597Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 1月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-