- 10 9月, 2013 2 次提交
-
-
Add error reporting to of_amba_device_create() so the user knows when (and why) some device tree nodes fail to initialize. [ The issue was spotted on Universal C210 board (using revision 0 of ARM Exynos4210 SoC) on which initialization was silently failing for PL330 MDMA1 device tree node (it was using the wrong addres resulting in amba_device_add() returning -ENODEV). ] Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Yijing Wang 提交于
Fix trivial comment typo for irq_of_parse_and_map(). Signed-off-by: NYijing Wang <wangyijing@huawei.com> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
- 30 8月, 2013 9 次提交
-
-
由 Anton Blanchard 提交于
We feed the entire DMI table into the random pool to provide better random data during early boot, so do the same with the flattened device tree. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Grant Likely 提交于
The flat tree unflatting path is using unsigned longs to carry around virtual address pointers to the device tree and the allocated memory used to unpack it. This is a little insane since every access to them needs to be cast to a pointer type before using it. This patch changes the data type to void* for the 'start' and 'mem' pointers and reworks the unflattening functions to use those values directly which results in slightly simpler code. Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Grant Likely 提交于
Patch 9e401275, "of: fdt: fix memory initialization for expanded DT" fixed incomplete clearing of memory when unflattening the device tree. However the code was already clearing some of the memory, it just wasn't doing so for all allocations. Now that the memory is cleared right at the point of allocation, the memset after unflatten_dt_alloc() is redundant. Remove it. Signed-off-by: NGrant Likely <grant.likely@linaro.org> Acked-by: NWladislav Wiebe <wladislav.kw@gmail.com>
-
由 Stephen Warren 提交于
Use the new of_parse_phandle_with_fixed_args() to implement the corrected gpio-ranges DT property definition. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Stephen Warren 提交于
The simplest case of __of_parse_phandle_with_args() now implements the semantics of of_parse_phandle(). Rewrite of_parse_phandle() to call __of_parse_phandle_with_args() rather than open-coding the simple case. Optimize __of_parse_phandle_with_args() so that it doesn't call of_find_node_by_phandle() except when it's strictly needed. This avoids introducing too much overhead when replacing of_parse_phandle(). Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Stephen Warren 提交于
This is identical to of_parse_phandle_with_args(), except that the number of argument cells is fixed, rather than being parsed out of the node referenced by each phandle. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Stephen Warren 提交于
Move of_parse_phandle() after __of_parse_phandle_with_args(), since a future patch will call __of_parse_phandle_with_args() from of_parse_phandle(). Moving the function avoids adding a prototype. Doing the move separately highlights the code changes separately. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Stephen Warren 提交于
Commit bd69f73f "of: Create function for counting number of phandles in a property" renamed of_parse_phandle_with_args(), and created a wrapper function that implemented the original name. However, the documentation of the original function was not moved, leaving it apparently documenting the newly renamed function. Move the documentation so that it is adjacent to the function it documents. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Grant Likely 提交于
Any calls to dt_alloc() need to be zeroed. This is a temporary fix, but the allocation function itself needs to zero memory before returning it. This is a follow up to patch 9e401275, "of: fdt: fix memory initialization for expanded DT" which fixed one call site but missed another. Signed-off-by: NGrant Likely <grant.likely@linaro.org> Acked-by: NWladislav Wiebe <wladislav.kw@gmail.com> Cc: stable@vger.kernel.org
-
- 29 8月, 2013 3 次提交
-
-
由 Grant Likely 提交于
Most architectures use the same implementation. Collapse the common ones into a single weak function that can be overridden. Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Geert Uytterhoeven 提交于
include/linux/of_net.h:16: warning: type qualifiers ignored on function return type Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Grant Likely 提交于
Linux 3.11-rc7
-
- 26 8月, 2013 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging fixes from Greg KH: "Here are two tiny staging tree fixes (well, one is for an iio driver, but those updates come through the staging tree due to dependancies) One fixes a problem with an IIO driver, and the other fixes a bug in the comedi driver core" * tag 'staging-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: bug-fix NULL pointer dereference on failed attach iio: adjd_s311: Fix non-scan mode data read
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are two USB fixes for 3.11-rc7 One fixes a reported regression in the OHCI driver, and the other fixes a reported build breakage in the USB phy drivers" * tag 'usb-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: phy: fix build breakage USB: OHCI: add missing PCI PM callbacks to ohci-pci.c
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "This round of fixes is smaller than previous: a couple more updates for the security fixes, and a one-liner kexec fix" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help text ARM: 7815/1: kexec: offline non panic CPUs on Kdump panic ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "Assorted fixes from the last week or so" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: collect_mounts() should return an ERR_PTR bfs: iget_locked() doesn't return an ERR_PTR efs: iget_locked() doesn't return an ERR_PTR() proc: kill the extra proc_readfd_common()->dir_emit_dots() cope with potentially long ->d_dname() output for shmem/hugetlb
-
- 25 8月, 2013 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fix from Rafael Wysocki: "I really hoped that it wouldn't be necessary to change anything in ACPI at this point, but it turns out that we need to revert one more ACPI video commit causing trouble. This reverts a change in the ACPI video driver that caused the ACPI backlight initialization to be carried out even if acpi_backlight=vendor is passed in the kernel command line which turns out to break things at least on one system" * tag 'acpi-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / video: Always call acpi_video_init_brightness() on init"
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of small bug fixes for lpfc and zfcp and a fix for a fairly nasty bug in sg where a process which cancels I/O completes in a kernel thread which would then try to write back to the now gone userspace and end up writing to a random kernel address instead" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] zfcp: remove access control tables interface (keep sysfs files) [SCSI] zfcp: fix schedule-inside-lock in scsi_device list loops [SCSI] zfcp: fix lock imbalance by reworking request queue locking [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal [SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on
-
由 Joern Rennecke 提交于
For a search buffer, 2 byte aligned, strchr() was returning pointer outside of buffer (buf - 1) ------------->8---------------- // Input buffer (default 4 byte aigned) char *buffer = "1AA_"; // actual search start (to mimick 2 byte alignment) char *current_line = &(buffer[2]); // Character to search for char c = 'A'; char *c_pos = strchr(current_line, c); printf("%s\n", c_pos) --> 'AA_' as oppose to 'A_' ------------->8---------------- Reported-by: NAnton Kolesov <Anton.Kolesov@synopsys.com> Debugged-by: NAnton Kolesov <Anton.Kolesov@synopsys.com> Cc: <stable@vger.kernel.org> # [3.9 and 3.10] Cc: Noam Camus <noamc@ezchip.com> Signed-off-by: NJoern Rennecke <joern.rennecke@embecosm.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
This should actually be returning an ERR_PTR on error instead of NULL. That was how it was designed and all the callers expect it. [AV: actually, that's what "VFS: Make clone_mnt()/copy_tree()/collect_mounts() return errors" missed - originally collect_mounts() was expected to return NULL on failure] Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dan Carpenter 提交于
iget_locked() returns a NULL on error, it doesn't return an ERR_PTR. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dan Carpenter 提交于
The iget_locked() function returns NULL on error and never an ERR_PTR. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Oleg Nesterov 提交于
proc_readfd_common() does dir_emit_dots() twice in a row, we need to do this only once. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
dynamic_dname() is both too much and too little for those - the output may be well in excess of 64 bytes dynamic_dname() assumes to be enough (thanks to ashmem feeding really long names to shmem_file_setup()) and vsnprintf() is an overkill for those guys. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 8月, 2013 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "This contains three commits all of which are updates for specific devices which aren't too widespread. Pretty limited scope and nothing too interesting or dangerous" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_fsl: save irqs while coalescing libata: apply behavioral quirks to sil3826 PMP sata, highbank: fix ordering of SGPIO signals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fix from Tejun Heo: "A late fix for cgroup. This fixes a behavior regression visible to userland which was created by a commit merged during -rc1. While the behavior change isn't too likely to be noticeable, the fix is relatively low risk and we'll need to backport it through -stable anyway if the bug gets released" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: fix a regression in validating config change
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Ben was on holidays for a week so a few nouveau regression fixes backed up, but they all seem necessary. Otherwise one i915 and one gma500 fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: gma500: Fix SDVO turning off randomly drm/nv04/disp: fix framebuffer pin refcounting drm/nouveau/mc: fix race condition between constructor and request_irq() drm/nouveau: fix reclocking on nv40 drm/nouveau/ltcg: fix allocating memory as free drm/nouveau/ltcg: fix ltcg memory initialization after suspend drm/nouveau/fb: fix null derefs in nv49 and nv4e init drm/i915: Invalidate TLBs for the rings after a reset
-
由 Anatolij Gustschin 提交于
Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c) renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h but changed drivers/usb/phy/phy-fsm-usb.c to include not existing "phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building: ... drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1 This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting in another build breakage: ... In file included from drivers/usb/phy/phy-fsl-usb.c:46:0: drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1 Fix both issues. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: stable <stable@vger.kernel.org> # 3.10+ Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
Commit c1117afb (USB: OHCI: make ohci-pci a separate driver) neglected to preserve the entries for the pci_suspend and pci_resume driver callbacks. As a result, OHCI controllers don't work properly during suspend and after hibernation. This patch adds the missing callbacks to the driver. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: NSteve Cotton <steve@s.cotton.clara.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ian Abbott 提交于
Commit dcd7b8bd ("staging: comedi: put module _after_ detach" by myself) reversed a couple of calls in `comedi_device_attach()` when recovering from an error returned by the low-level driver's 'attach' handler. Unfortunately, that introduced a NULL pointer dereference bug as `dev->driver` is NULL after the call to `comedi_device_detach()`. We still have a pointer to the low-level comedi driver structure in the `driv` variable, so use that instead. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Merge networking fixes from David Miller: 1) Revert Johannes Berg's genetlink locking fix, because it causes regressions. Johannes and Pravin Shelar are working on fixing things properly. 2) Do not drop ipv6 ICMP messages without a redirected header option, they are legal. From Duan Jiong. 3) Missing error return propagation in probing of via-ircc driver. From Alexey Khoroshilov. 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when initializing, from Peter Wu. 5) realtek phy driver programs wrong interrupt status bit, from Giuseppe CAVALLARO. 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn. 7) Bridge code uses wrong bitmap length, from Toshiaki Makita. 8) SFC driver uses wrong indexes to look up MAC filters, from Ben Hutchings. 9) Don't pass stack buffers into usb control operations in hso driver, from Daniel Gimpelevich. 10) Multiple ipv6 fragmentation headers in one packet is illegal and such packets should be dropped, from Hannes Frederic Sowa. 11) When TCP sockets are "repaired" as part of checkpoint/restart, the timestamp field of SKBs need to be refreshed otherwise RTOs can be wildly off. From Andrey Vagin. 12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in hostp driver. From Dan Carpenter. 13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes it does. From Dan Carpenter. 14) Fix regression in wireless SME disconnects, from Johannes Berg. 15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from Jussi Kivilinna. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) ipv4: expose IPV4_DEVCONF ipv6: handle Redirect ICMP Message with no Redirected Header option be2net: fix disabling TX in be_close() Revert "genetlink: fix family dump race" hso: Fix stack corruption on some architectures hso: Earlier catch of error condition sfc: Fix lookup of default RX MAC filters when steered using ethtool bridge: Use the correct bit length for bitmap functions in the VLAN code packet: restore packet statistics tp_packets to include drops net: phy: rtl8211: fix interrupt on status link change r8169: remember WOL preferences on driver load via-ircc: don't return zero if via_ircc_open() failed macvtap: Ignore tap features when VNET_HDR is off macvtap: Correctly set tap features when IFF_VNET_HDR is disabled. macvtap: simplify usage of tap_features tcp: set timestamps for restored skb-s bnx2x: set VF DMAE when first function has 0 supported VFs bnx2x: Protect against VFs' ndos when SR-IOV is disabled bnx2x: prevent VF benign attentions bnx2x: Consider DCBX remote error ...
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "A few fixes. One is a licensing change and I don't do licensing, so please eyeball that one" Licensing eye-balled. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier
-
由 Richard Laager 提交于
The LZ4 code is listed as using the "BSD 2-Clause License". Signed-off-by: NRichard Laager <rlaager@wiktel.com> Acked-by: NKyungsik Lee <kyungsik.lee@lge.com> Cc: Chanho Min <chanho.min@lge.com> Cc: Richard Yao <ryao@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> [ The 2-clause BSD can be just converted into GPL, but that's rude and pointless, so don't do it - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
The swapaccount kernel parameter without any values has been removed by commit a2c8990a ("memsw: remove noswapaccount kernel parameter") but it seems that we didn't get rid of all the left overs. Make sure that menuconfig help text and kernel-parameters.txt are clear about value for the paramter and remove the stalled comment which is not very much useful on its own. Signed-off-by: NMichal Hocko <mhocko@suse.cz> Reported-by: NGergely Risko <gergely@risko.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vyacheslav Dubeyko 提交于
Fix the issue with improper counting number of flying bio requests for BIO_EOPNOTSUPP error detection case. The sb_nbio must be incremented exactly the same number of times as complete() function was called (or will be called) because nilfs_segbuf_wait() will call wail_for_completion() for the number of times set to sb_nbio: do { wait_for_completion(&segbuf->sb_bio_event); } while (--segbuf->sb_nbio > 0); Two functions complete() and wait_for_completion() must be called the same number of times for the same sb_bio_event. Otherwise, wait_for_completion() will hang or leak. Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vyacheslav Dubeyko 提交于
Remove double call of bio_put() in nilfs_end_bio_write() for the case of BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter and he suggests first version of the fix too. Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Drake 提交于
Being a low-level component, various drivers (e.g. olpc-battery) assume that it is ok to communicate with the OLPC Embedded Controller during probe. Therefore the OLPC EC driver must be initialised before other drivers try to use it. This was the case until it was recently moved out of arch/x86 and restructured around commits ac250415 ("Platform: OLPC: turn EC driver into a platform_driver") and 85f90cf6 ("x86: OLPC: switch over to using new EC driver on x86"). Use arch_initcall so that olpc-ec is readied earlier, matching the previous behaviour. Fixes a regression introduced in Linux-3.6 where various drivers such as olpc-battery and olpc-xo1-sci failed to load due to an inability to communicate with the EC. The user-visible effect was a lack of battery monitoring, missing ebook/lid switch input devices, etc. Signed-off-by: NDaniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Paul Fox <pgf@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-