Not setting the ipv6 bit while destroying ipv6 listening servers may
result in potential fatal adapter errors due to lookup engine memory hash
errors. Therefore always set ipv6 field while destroying ipv6 listening
servers.

Fixes: 830662f6 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.comSigned-off-by: NPotnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

gcc points out an incorrect enum assignment:

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c: In function 'chcr_ktls_cpl_set_tcb_rpl':
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:684:22: warning: implicit conversion from 'enum <anonymous>' to 'enum ch_ktls_open_state' [-Wenum-conversion]

This appears harmless, and should apparently use 'CH_KTLS_OPEN_SUCCESS'
instead of 'false', with the same value '0'.

Fixes: efca3878 ("ch_ktls: Issue if connection offload fails")
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the error return path when lfs fails to allocate is not free'ing
the memory allocated to buf. Fix this by adding the missing kfree.

Addresses-Coverity: ("Resource leak")
Fixes: f7884097 ("octeontx2-af: Formatting debugfs entry rsrc_alloc.")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current calculation for diff of TMR_ADD register value may have
64-bit overflow in this code line, when long type scaled_ppm is
large.

adj *= scaled_ppm;

This patch is to resolve it by using mul_u64_u64_div_u64().
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
programmed in the Tiger Lake GBE controller is not large enough to allow
the platform to enter Package C10, which in turn prevents the platform from
achieving its low power target during suspend-to-idle.  Ignore the GBE LTR
value on Tiger Lake. LTR ignore functionality is currently performed solely
by a debugfs write call. Split out the LTR code into its own function that
can be called by both the debugfs writer and by this work around.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Reviewed-by: NSasha Neftin <sasha.neftin@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Reviewed-by: NRajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>

The intel_pmc_core driver is mostly used as a debugging driver for Intel
platforms that support SLPS0 (S0ix). But the driver may also be used to
communicate actions to the PMC in order to ensure transition to SLPS0 on
some systems and architectures. As such the driver should be built on all
platforms it supports. Indicate this in the Kconfig. Also update the list
of supported features.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Suggested-by: NMario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-1-david.e.box@linux.intel.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>

Fixes off-by-one bugs in the macro assignments for the crashlog control
bits. Was initially tested on emulation but bug revealed after testing on
silicon.

Fixes: 5ef9998c ("platform/x86: Intel PMT Crashlog capability driver")
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-2-david.e.box@linux.intel.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>

Initialize the struct resource in intel_pmt_dev_register to zero to avoid a
fault should the char *name field be non-zero.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-1-david.e.box@linux.intel.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>

The structures are used as place holders, so they are modified at run-time.
Obviously they may not be constants.

  BUG: unable to handle page fault for address: d0643220
  ...
  CPU: 0 PID: 110 Comm: modprobe Not tainted 5.11.0+ #1
  Hardware name: Intel Corp. QUARK/GalileoGen2, BIOS 0x01000200 01/01/2014
  EIP: intel_quark_mfd_probe+0x93/0x1c0 [intel_quark_i2c_gpio]

This partially reverts the commit c4a164f4.

While at it, add a comment to avoid similar changes in the future.

Fixes: c4a164f4 ("mfd: Constify static struct resources")
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Tested-by: NTong Zhang <ztong0001@gmail.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

gcc-11 complains about a prototype declaration that is different
from the function definition:

drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
  724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf)
      |                                        ~~~~^~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’}
   62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
      |                                        ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
  790 | u16 capi20_get_serial(u32 contr, u8 *serial)
      |                                  ~~~~^~~~~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’}
   64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
      |                                  ~~~^~~~~~~~~~~~~~~~~~~~~~~

Change the definition to make them match.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Device firmware doesn't handle ecpu bit for vhca state processing
events and commands. Instead device firmware refers to the unique
function id to distinguish SF of different PCI functions.

When ecpu bit is used, firmware returns a syndrome.

mlx5_cmd_check:780:(pid 872): MODIFY_VHCA_STATE(0xb0e) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x263211)
mlx5_sf_dev_table_create:248:(pid 872): SF DEV table create err = -22

Hence, avoid using ecpu bit.

Fixes: 8f010541 ("net/mlx5: SF, Add port add delete functionality")
Fixes: 90d010b8 ("net/mlx5: SF, Add auxiliary device support")
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NVu Pham <vuhuong@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

mlx5e_select_queue compares num_tc_x_num_ch to real_num_tx_queues to
determine if HTB and/or PTP offloads are active. If they are, it
calculates netdev_pick_tx() % num_tc_x_num_ch to prevent it from
selecting HTB and PTP queues for regular traffic. However, before the
channels are first activated, num_tc_x_num_ch is zero. If
ndo_select_queue gets called at this point, the HTB/PTP check will pass,
and mlx5e_select_queue will attempt to take a modulo by num_tc_x_num_ch,
which equals to zero.

This commit fixes the bug by assigning num_tc_x_num_ch to a non-zero
value before registering the netdev.

Fixes: 214baf22 ("net/mlx5e: Support HTB offload")
Reported-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NMaxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Expose error value when failing to comply to command:
$ ethtool --set-priv-flags eth2 rx_cqe_compress [on/off]

Fixes: be7e87f9 ("net/mlx5e: Fail safe cqe compressing/moderation mode setting")
Signed-off-by: NAya Levin <ayal@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Setting connection tracking OVS flows and then setting non-CT flows that
use tuple rewrite action (e.g. mod_tp_dst), causes the latter flows not
being offloaded.

Fix by using a stricter condition in modify_header_match_supported() to
check tuple rewrite support only for flows with CT action. The check is
factored out into standalone modify_tuple_supported() function to aid
readability.

Fixes: 7e36feeb ("net/mlx5e: CT: Don't offload tuple rewrites for established tuples")
Signed-off-by: NDima Chumak <dchumak@nvidia.com>
Reviewed-by: NPaul Blakey <paulb@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently, we support hardware offload only for MPLS over UDP.
However, rules matching on MPLS parameters are now wrongly offloaded
for regular MPLS, without actually taking the parameters into
consideration when doing the offload.
Fix it by rejecting such unsupported rules.

Fixes: 72046a91 ("net/mlx5e: Allow to match on mpls parameters")
Signed-off-by: NAlaa Hleihel <alaa@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The multicast counter got removed from uplink representor due to the
cited patch.

Fixes: 47c97e6b ("net/mlx5e: Fix multicast counter not up-to-date in "ip -s"")
Signed-off-by: NHuy Nguyen <huyn@nvidia.com>
Reviewed-by: NDaniel Jurgens <danielj@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

When reloading driver, the head/tail pointer of CMDQ may be not at
position 0. Then during initialization of CMDQ, if head is reset first,
the firmware will start to handle CMDQ because the head is not equal to
the tail. The driver can reset tail first since the firmware will be
triggerred only by head. This bug is introduced by changing macros of
head/tail register without changing the order of initialization.

Fixes: 292b3352 ("RDMA/hns: Adjust fields and variables about CMDQ tail/head")
Link: https://lore.kernel.org/r/1615602611-7963-1-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Stop reporting SW_DOCK events because this breaks suspend-on-lid-close.

SW_DOCK should only be reported for docking stations, but all the DSDTs in
my DSDT collection which use the intel-vbtn code, always seem to use this
for 2-in-1s / convertibles and set SW_DOCK=1 when in laptop-mode (in tandem
with setting SW_TABLET_MODE=0).

This causes userspace to think the laptop is docked to a port-replicator
and to disable suspend-on-lid-close, which is undesirable.

Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting.

Note this may theoretically cause us to stop reporting SW_DOCK on some
device where the 0xCA and 0xCB intel-vbtn events are actually used for
reporting docking to a classic docking-station / port-replicator but
I'm not aware of any such devices.

Also the most important thing is that we only report SW_DOCK when it
reliably reports being docked to a classic docking-station without any
false positives, which clearly is not the case here. If there is a
chance of reporting false positives then it is better to not report
SW_DOCK at all.

Cc: stable@vger.kernel.org
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321163513.72328-1-hdegoede@redhat.com

Cleanup create_attributes_level_sysfs_files():

1. There is no need to call sysfs_remove_file() on error, sysman_init()
will already call release_attributes_data() on failure which already does
this.

2. There is no need for the pr_debug() calls sysfs_create_file() should
never fail and if it does it will already complain about the problem
itself.

Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-8-hdegoede@redhat.com

When either the attributes or the password interface is not found, then
unregister the 2 wmi drivers again and return -ENODEV from sysman_init().

Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Reported-by: NAlexander Naumann <alexandernaumann@gmx.de>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-7-hdegoede@redhat.com

Cleanup sysman_init() error-exit handling:

1. There is no need for the fail_reset_bios and fail_authentication_kset
   eror-exit cases, these can be handled by release_attributes_data()

2. Rename all the labels from fail_what_failed, to err_what_to_cleanup
   this is the usual way to name these and avoids the need to rename
   them when extra steps are added.

Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-6-hdegoede@redhat.com

platform/x86: dell-wmi-sysman: Fix release_attributes_data() getting called twice on init_bios_attributes() failure

All calls of init_bios_attributes() will result in a
goto fail_create_group if they fail, which calls
release_attributes_data().

So there is no need to call release_attributes_data() from
init_bios_attributes() on failure itself.

Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-5-hdegoede@redhat.com

During some of the error-exit paths it is possible that
release_attributes_data() will get called multiple times,
which results in exit_foo_attributes() getting called multiple
times.

Make it safe to call exit_foo_attributes() multiple times,
avoiding double-free()s in this case.

Note that release_attributes_data() really should only be called
once during error-exit paths. This will be fixed in a separate patch
and it is good to have the exit_foo_attributes() functions modified
this way regardless.

Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-4-hdegoede@redhat.com

It is possible for release_attributes_data() to get called when the
main_dir_kset has not been created yet, move the removal of the bios-reset
sysfs attr to under a if (main_dir_kset) check to avoid a NULL pointer
deref.

Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Reported-by: NAlexander Naumann <alexandernaumann@gmx.de>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-3-hdegoede@redhat.com

On some system the WMI GUIDs used by dell-wmi-sysman are present but there
are no enum type attributes, this causes init_bios_attributes() to return
-ENODEV, after which sysman_init() does a "goto fail_create_group" and then
calls release_attributes_data().

release_attributes_data() calls kset_unregister(wmi_priv.main_dir_kset);
but before this commit it was missing a "wmi_priv.main_dir_kset = NULL;"
statement; and after calling release_attributes_data() the sysman_init()
error handling does this:

        if (wmi_priv.main_dir_kset) {
                kset_unregister(wmi_priv.main_dir_kset);
                wmi_priv.main_dir_kset = NULL;
        }

Which causes a second kset_unregister(wmi_priv.main_dir_kset), leading to
a double-free, which causes a crash.

Add the missing "wmi_priv.main_dir_kset = NULL;" statement to
release_attributes_data() to fix this double-free crash.

Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: Divya Bharathi <Divya_Bharathi@dell.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321115901.35072-2-hdegoede@redhat.com

Testing has shown that setting /sys/firmware/acpi/platform_profile to
"balanced" when /sys/bus/platform/devices/thinkpad_acpi/dytc_lapmode
reports 1, causes dytc_lapmode to get reset to 0 and then it becomes
stuck at 0 for aprox. 30 minutes even if the laptop is used on a lap.

Disabling CQL (when enabled) before issuing the DYTC_CMD_RESET to get
back to balanced mode and re-enabling it afterwards again, like the
code already does when switching to low-power / performance mode fixes
this.

Fixes: c3bfcd4c ("platform/x86: thinkpad_acpi: Add platform profile support")
Tested-by: NMark Pearson <markpearson@lenovo.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210321113108.7069-1-hdegoede@redhat.com

On many recent ThinkPad laptops, there's a new LED next to the ESC key,
that indicates the FnLock status.
When the Fn+ESC combo is pressed, FnLock is toggled, which causes the
Media Key functionality to change, making it so that the media keys
either perform their media key function, or function as an F-key by
default. The Fn key can be used the access the alternate function at any
time.

With the current linux kernel, the LED doens't change state if you press
the Fn+ESC key combo. However, the media key functionality *does*
change. This is annoying, since the LED will stay on if it was on during
bootup, and it makes it hard to keep track what the current state of the
FnLock is.

This patch calls an ACPI function, that gets the current media key
state, when the Fn+ESC key combo is pressed. Through testing it was
discovered that this function causes the LED to update correctly to
reflect the current state when this function is called.

The relevant ACPI calls are the following:
\_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled.
\_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it.

Relevant discussion:
https://bugzilla.kernel.org/show_bug.cgi?id=207841
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015Signed-off-by: NEsteve Varela Colominas <esteve.varela@gmail.com>
Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.comSigned-off-by: NHans de Goede <hdegoede@redhat.com>

IOMMU errors have been reported if WoL is enabled and interface is
brought down. It turned out that the network chip triggers DMA
transfers after the DMA buffers have been freed. For WoL to work we
need to leave rx enabled, therefore simply stop the chip from being
a DMA busmaster.

Fixes: 567ca57f ("r8169: add rtl8169_up")
Tested-by: NPaul Blazejowski <paulb@blazebox.homeip.net>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We use ipa_cmd_header_valid() to ensure certain values we will
program into hardware are within range, well in advance of when we
actually program them.  This way we avoid having to check for errors
when we actually program the hardware.

Unfortunately the dev_err() call for a bad offset value does not
supply the arguments to match the format specifiers properly.
Fix this.

There was also supposed to be a check to ensure the size to be
programmed fits in the field that holds it.  Add this missing check.

Rearrange the way we ensure the header table fits in overall IPA
memory range.

Finally, update ipa_cmd_table_valid() so the format of messages
printed for errors matches what's done in ipa_cmd_header_valid().
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 6417f031 ("module: remove never implemented
MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was
removed from the kerne entirely. Shortly before this patch was applied
mainline the commit 59ec7b89 ("can: peak_usb: add forgotten
supported devices") was added to net/master. As this would result in a
merge conflict, let's revert this patch.

Fixes: 59ec7b89 ("can: peak_usb: add forgotten supported devices")
Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.deSuggested-by: NLeon Romanovsky <leon@kernel.org>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

MTU cannot be changed on dwmac-sun8i. (ip link set eth0 mtu xxx returning EINVAL)
This is due to tx_fifo_size being 0, since this value is used to compute valid
MTU range.
Like dwmac-sunxi (with commit 806fd188 ("net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes"))
dwmac-sun8i need to have tx and rx fifo sizes set.
I have used values from datasheets.
After this patch, setting a non-default MTU (like 1000) value works and network is still useable.

Tested-on: sun8i-h3-orangepi-pc
Tested-on: sun8i-r40-bananapi-m2-ultra
Tested-on: sun50i-a64-bananapi-m64
Tested-on: sun50i-h5-nanopi-neo-plus2
Tested-on: sun50i-h6-pine-h64
Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i")
Reported-by: NBelisko Marek <marek.belisko@gmail.com>
Signed-off-by: NCorentin Labbe <clabbe@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the USB host controller is EHCI, the throughput is reduced from
300Mb/s to 60Mb/s, when the rx buffer size is modified from 16K to
32K.

According to the EHCI spec, the maximum size of the qTD is 20K.
Therefore, when the driver uses more than 20K buffer, the latency
time of EHCI would be increased. And, it let the RTL8153A get worse
throughput.

However, the driver uses alloc_pages() for rx buffer, so I limit
the rx buffer to 16K rather than 20K.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205923
Fixes: ec5791c2 ("r8152: separate the rx buffer size")
Reported-by: NRobert Davies <robdavies1977@gmail.com>
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a couple of checks to make sure timestamping is on and that the
timestamp value from DMA is valid. This avoids any functional issues
that could come from a misinterpreted time stamp.

One of the functions changed doesn't need a return value added because
there was no value in checking from the calling locations.

While here, fix a couple of reverse christmas tree issues next to
the code being changed.

Fixes: f56e7bba ("igb: Pull timestamp from fragment before adding it to skb")
Fixes: 9cbc948b ("igb: add XDP support")
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NDave Switzer <david.switzer@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The include guard "_E1000_HW_H_" is used by two separate header files in
two different drivers (e1000/e1000_hw.h and igb/e1000_hw.h). Using the
same include guard macro in more than one header file may cause
unexpected behavior from the compiler. Fix this by renaming the
duplicate guard in the igb driver.

Fixes: 9d5c8243 ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: NTom Seewald <tseewald@gmail.com>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The include guard "_E1000_HW_H_" is used by header files in three
different drivers (e1000/e1000_hw.h, e1000e/hw.h, and igb/e1000_hw.h).
Using the same include guard macro in more than one header file may
cause unexpected behavior from the compiler. Fix the duplicate include
guard in the e1000e driver by renaming it.

Fixes: bc7f75fa ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Signed-off-by: NTom Seewald <tseewald@gmail.com>
Tested-by: NDvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Acked-by: NSasha Neftin <sasha.neftin@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Revert commit 44cc89f7 ("PM: runtime: Update device status
before letting suppliers suspend") that introduced a race condition
into __rpm_callback() which allowed a concurrent rpm_resume() to
run and resume the device prematurely after its status had been
changed to RPM_SUSPENDED by __rpm_callback().

Fixes: 44cc89f7 ("PM: runtime: Update device status before letting suppliers suspend")
Link: https://lore.kernel.org/linux-pm/24dfb6fc-5d54-6ee2-9195-26428b7ecf8a@intel.com/Reported-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>

In the for loop in efi_mem_reserve_persistent(), prsv = rsv->next
use the unmapped rsv. Use the unmapped pages will cause segment
fault.

Fixes: 18df7577 ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: NLv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>

Set the disconnected flag before releasing the data interface in case
netdev registration fails to avoid having the disconnect callback try to
deregister the never registered netdev (and trigger a WARN_ON()).

Fixes: 87cf6560 ("USB host CDC Phonet network interface driver")
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Starting with commit f295c8cf
("drm/nouveau: fix dma syncing warning with debugging on.")
the following oops occures:

   BUG: kernel NULL pointer dereference, address: 0000000000000000
   #PF: supervisor read access in kernel mode
   #PF: error_code(0x0000) - not-present page
   PGD 0 P4D 0
   Oops: 0000 [#1] PREEMPT SMP PTI
   CPU: 6 PID: 1013 Comm: Xorg.bin Tainted: G E     5.11.0-desktop-rc0+ #2
   Hardware name: Acer Aspire VN7-593G/Pluto_KLS, BIOS V1.11 08/01/2018
   RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau]
   Call Trace:
    nouveau_bo_validate+0x5d/0x80 [nouveau]
    nouveau_gem_ioctl_pushbuf+0x662/0x1120 [nouveau]
    ? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau]
    drm_ioctl_kernel+0xa6/0xf0 [drm]
    drm_ioctl+0x1f4/0x3a0 [drm]
    ? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau]
    nouveau_drm_ioctl+0x50/0xa0 [nouveau]
    __x64_sys_ioctl+0x7e/0xb0
    do_syscall_64+0x33/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xae
   ---[ end trace ccfb1e7f4064374f ]---
   RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau]

The underlying problem is not introduced by the commit, yet it uncovered the
underlying issue. The cited commit relies on valid pages. This is not given for
due to some bugs. For now, just warn and work around the issue by just ignoring
the bad ttm objects.
Below is some debug info gathered while debugging this issue:

nouveau 0000:01:00.0: DRM: ttm_dma->num_pages: 2048
nouveau 0000:01:00.0: DRM: ttm_dma->pages is NULL
nouveau 0000:01:00.0: DRM: ttm_dma: 00000000e96058e7
nouveau 0000:01:00.0: DRM: ttm_dma->page_flags:
nouveau 0000:01:00.0: DRM: ttm_dma:   Populated: 1
nouveau 0000:01:00.0: DRM: ttm_dma:   No Retry: 0
nouveau 0000:01:00.0: DRM: ttm_dma:   SG: 256
nouveau 0000:01:00.0: DRM: ttm_dma:   Zero Alloc: 0
nouveau 0000:01:00.0: DRM: ttm_dma:   Swapped: 0
Signed-off-by: NTobias Klausmann <tobias.klausmann@freenet.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210313222159.3346-1-tobias.klausmann@freenet.de

Commit 92c8c16f ("powerpc/embedded6xx: Remove C2K board support")
removed last selector of CONFIG_MV64X60.

As it is not a user selectable config item, all references to it
are stale. Remove them.
Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>