Port_sts is a thing of the past for this driver. It was something
present on the initial implementation of this driver and parts of the
original struct were dropped over time. Using an array of int to store if
a port is enabled or not to handle PM operation seems overkill. Switch
and use a simple u8 to store the port status where each bit correspond
to a port. (bit is set port is enabled, bit is not set, port is disabled)
Also add some comments to better describe why we need to track port
status.
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DSA set the CPU port based on the largest MTU of all the slave ports.
Based on this we can drop the MTU array from qca8k_priv and set the
port_change_mtu logic on DSA changing MTU of the CPU port as the switch
have a global MTU settingfor each port.
Signed-off-by: NAnsuel Smith <ansuelsmth@gmail.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new neighbour cache entry in STALE state for routers on receiving
an unsolicited (gratuitous) neighbour advertisement with
target link-layer-address option specified.
This is similar to the arp_accept configuration for IPv4.
A new sysctl endpoint is created to turn on this behaviour:
/proc/sys/net/ipv6/conf/interface/accept_unsolicited_na.
Signed-off-by: NArun Ajith S <aajith@arista.com>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

idev can be NULL, as the surrounding code suggests.

Fixes: 4daf841a ("net: ipv6: add skb drop reasons to ip6_rcv_core()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Menglong Dong <imagedong@tencent.com>
Cc: Jiang Biao <benbjiang@tencent.com>
Cc: Hao Peng <flyingpeng@tencent.com>
Link: https://lore.kernel.org/r/20220413205653.1178458-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

For some unknown reason qdisc_reset() is using
a convoluted way of freeing two lists of skbs.

Use __skb_queue_purge() instead.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220414011004.2378350-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

In review comment [1] was pointed that new code is not supposed
to set driver version and should rely on kernel version instead.

As an outcome of that comment all the dance around setting such
driver version to FW should be removed too, because in upstream
kernel whole driver will have same version so read/write from/to
FW will give same result.

[1] https://lore.kernel.org/all/YladGTmon1x3dfxI@unreal

Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/5d76f3116ee795071ec044eabb815d6c2bdc7dbd.1649922731.git.leonro@nvidia.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Sukadev Bhattiprolu says:

====================
ibmvnic: Use a set of LTBs per pool

ibmvnic uses a single large long term buffer (LTB) per rx or tx
pool (queue). This has two limitations.

First, if we need to free/allocate an LTB (eg during a reset), under
low memory conditions, the allocation can fail.

Second, the kernel limits the size of single LTB (DMA buffer) to 16MB
(based on MAX_ORDER). With jumbo frames (mtu = 9000) we can only have
about 1763 buffers per LTB (16MB / 9588 bytes per frame) even though
the max supported buffers is 4096. (The 9588 instead of 9088 comes from
IBMVNIC_BUFFER_HLEN.)

To overcome these limitations, allow creating a set of LTBs per queue.
====================

Link: https://lore.kernel.org/r/20220413171026.1264294-1-drt@linux.ibm.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Allow multiple LTBs in the txpool's ltb_set. i.e rather than using
a single large LTB, use several smaller LTBs.

The first n-1 LTBs will all be of the same size. The size of the last
LTB in the set depends on the number of buffers and buffer (mtu) size.
This strategy hopefully allows more reuse of the initial LTBs and also
reduces the chances of an allocation failure (of the large LTB) when
system is low in memory.
Suggested-by: NBrian King <brking@linux.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: NDany Madden <drt@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Allow multiple LTBs in the rxpool's ltb_set. The first n-1 LTBs will all
be of the same size. The size of the last LTB in the set depends on the
number of buffers and buffer (mtu) size.

Having a set of LTBs per pool provides a couple of benefits.

First, with the current value of IBMVNIC_MAX_LTB_SIZE of 16MB, with an
MTU of 9000, we need a LTB (DMA buffer) of that size but the allocation
can fail in low memory conditions. With a set of LTBs per pool, we can
use several smaller (8MB) LTBs and hopefully have fewer allocation
failures. (See also comments in ibmvnic.h on the trade-off with smaller
LTBs)

Second since the kernel limits the size of the DMA buffer to 16MB (based
on MAX_ORDER), with a single DMA buffer per pool, the pool is also limited
to 16MB. This in turn limits the number of buffers per pool to 1763 when
MTU is 9000. With a set of LTBs per pool, we can have upto the max of 4096
buffers per pool even when MTU is 9000.
Suggested-by: NBrian King <brking@linux.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: NDany Madden <drt@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Define and use interfaces that treat the long term buffer (LTB) of an
rxpool as a set of LTBs rather than a single LTB. The set only has one
LTB for now.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: NDany Madden <drt@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Define a helper to map a given txpool buffer into its corresponding long
term buffer (LTB) and offset. Currently there is just one LTB per txpool
so the mapping is trivial. When we add support for multiple LTBs per
txpool, this helper will be more useful.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: NDany Madden <drt@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Define a helper to map a given rx pool buffer into its corresponding long
term buffer (LTB) and offset. Currently there is just one LTB per pool so
the mapping is trivial. When we add support for multiple LTBs per pool,
this helper will be more useful.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: NDany Madden <drt@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The local variable 'index' is heavily used in some functions and is
confusing with the presence of other "index" fields like pool->index,
->consumer_index, etc. Rename it to bufidx to better reflect that its
the index of a buffer in the pool.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: NDany Madden <drt@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Jie Wang says:

====================
net: ethool: add support to get/set tx push by ethtool -G/g

These three patches add tx push in ring params and adapt the set and get APIs
of ring params.
====================

Link: https://lore.kernel.org/r/20220412020121.14140-1-huangguangbin2@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

This patch adds tx push param to hns3 ring param and adapts the set and get
API of ring params. So users can set it by cmd ethtool -G and get it by cmd
ethtool -g.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Currently these two checks in ethnl_set_rings are added after rtnl_lock()
which will do useless works if the request is invalid.

So this patch moves these checks before the rtnl_lock() to avoid these
costs.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Currently tx push is a standard driver feature which controls use of a fast
path descriptor push. So this patch extends the ringparam APIs and data
structures to support set/get tx push by ethtool -G/g.
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

If register_netdev() fails , it should return error
code in octep_probe().

Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Radhey Shyam Pandey says:

====================
net: emaclite: Trivial code cleanup

This patchset fix coding style issues, remove BUFFER_ALIGN
macro and also update copyright text.

I have to resend as earlier series didn't reach mailing list
due to some configuration issue.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

BUFFER_ALIGN macro is used to calculate the number of bytes
required for the next alignment. Instead of this, we can directly
use the skb_reserve(skb, NET_IP_ALIGN) to make the protocol header
buffer aligned on at least a 4-byte boundary, where the NET_IP_ALIGN
is by default defined as 2. So removing the BUFFER_ALIGN and its
related defines which it can be done by the skb_reserve() itself.
Signed-off-by: NShravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on recommended guidance Copyright term should be also present in
front of (c). That's why aligned driver to match this pattern.
It helps automated tools with source code scanning.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make coding style changes to fix checkpatch script warnings.
There is no functional change. Fixes below check and warnings-

CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: spinlock_t definition without comment
CHECK: Please don't use multiple blank lines
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
CHECK: braces {} should be used on all arms of this statement
CHECK: Unbalanced braces around else statement
CHECK: Alignment should match open parenthesis
WARNING: Missing a blank line after declarations
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NMinghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a spelling mistake in a dev_info message. Fix it.
Signed-off-by: NColin Ian King <colin.i.king@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Preparations for line cards support

Currently, mlxsw registers thermal zones as well as hwmon entries for
objects such as transceiver modules and gearboxes. In upcoming modular
systems, these objects are no longer found on the main board (i.e., slot
0), but on plug-able line cards. This patchset prepares mlxsw for such
systems in terms of hwmon, thermal and cable access support.

Patches #1-#3 gradually prepare mlxsw for transceiver modules access
support for line cards by splitting some of the internal structures and
some APIs.

Patches #4-#5 gradually prepare mlxsw for hwmon support for line cards
by splitting some of the internal structures and augmenting them with a
slot index.

Patches #6-#7 do the same for thermal zones.

Patch #8 selects cooling device for binding to a thermal zone by exact
name match to prevent binding to non-relevant devices.

Patch #9 replaces internal define for thermal zone name length with a
common define.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace internal define 'MLXSW_THERMAL_ZONE_MAX_NAME' by common
'THERMAL_NAME_LENGTH'.
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Modular system supports additional cooling devices "mlxreg_fan1",
"mlxreg_fan2", etcetera. Thermal zones in "mlxsw" driver should be
bound to the same device as before called "mlxreg_fan". Used exact
match for cooling device name to avoid binding to new additional
cooling devices.
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add prefix "lc#n" to thermal zones associated with the thermal objects
found on line cards.

For example thermal zone for module #9 located at line card #7 will
have type:
mlxsw-lc7-module9.
And thermal zone for gearbox #3 located at line card #5 will have type:
mlxsw-lc5-gearbox3.
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce intermediate level for thermal zones areas.
Currently all thermal zones are associated with thermal objects located
within the main board. Such objects are created during driver
initialization and removed during driver de-initialization.

For line cards in modular system the thermal zones are to be associated
with the specific line card. They should be created whenever new line
card is available (inserted, validated, powered and enabled) and
removed, when line card is getting unavailable.
The thermal objects found on the line card #n are accessed by setting
slot index to #n, while for access to objects found on the main board
slot index should be set to default value zero.

Each thermal area contains the set of thermal zones associated with
particular slot index.
Thus introduction of thermal zone areas allows to use the same APIs for
the main board and line cards, by adding slot index argument.
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add 'slot' parameter to 'mlxsw_hwmon_dev' structure. Use this parameter
in mlxsw_reg_mtmp_pack(), mlxsw_reg_mtbr_pack(), mlxsw_reg_mgpir_pack()
and mlxsw_reg_mtmp_slot_index_set() routines.
For main board it'll always be zero, for line cards it'll be set to
the physical slot number in modular systems.
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, mlxsw supports a single hwmon device and registers it with
attributes corresponding to the various objects found on the main
board such as fans and gearboxes.

Line cards can have the same objects, but unlike the main board they
can be added and removed while the system is running. The various
hwmon objects found on these line cards should be created when the
line card becomes available and destroyed when the line card becomes
unavailable.

The above can be achieved by representing each line card as a
different hwmon device and registering / unregistering it when the
line card becomes available / unavailable.

Prepare for multi hwmon device support by splitting
'struct mlxsw_hwmon' into 'struct mlxsw_hwmon' and
'struct mlxsw_hwmon_dev'. The first will hold information relevant to
all hwmon devices, whereas the second will hold per-hwmon device
information.
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use a separate function for enablement of port module events such
plug/unplug and temperature threshold crossing. The motivation is to
reuse the function for line cards.
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The port module core is tasked with module operations such as setting
power mode policy and reset. The per-module information is currently
stored in one large array suited for non-modular systems where only the
main board is present (i.e., slot index 0).

As a preparation for line cards support, allocate a per line card array
according to the queried number of slots in the system. For each line
card, allocate a module array according to the queried maximum number of
modules per-slot.
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend all cable info APIs with 'slot_index' argument.

For main board, slot will always be set to zero and these APIs will work
as before. If reading cable information is required from cages located
on line cards, slot should be set to the physical slot number, where
line card is located in modular systems.
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NMinghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NMinghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NMinghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the most common setups, the geneve tunnels use an inner
ethernet encapsulation. In the GRO path, when such condition is
true, we can call directly the relevant GRO helper and avoid
a few indirect calls.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lorenzo Bianconi says:

====================
net: mvneta: add support for page_pool_get_stats

Introduce page_pool stats ethtool APIs in order to avoid driver duplicated
code.

Changes since v4:
- rebase on top of net-next

Changes since v3:
- get rid of wrong for loop in page_pool_ethtool_stats_get()
- add API stubs when page_pool_stats are not compiled in

Changes since v2:
- remove enum list of page_pool stats in page_pool.h
- remove leftover change in mvneta.c for ethtool_stats array allocation

Changes since v1:
- move stats accounting to page_pool code
- move stats string management to page_pool code
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce support for the page_pool stats API into mvneta driver.
Report page_pool stats through ethtool.
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>