- 17 7月, 2012 1 次提交
-
-
由 Heiko Carstens 提交于
Avoid padding in the middle and the end of the data structure by moving nohz_delay member to the beginning. Saves eight byte per cpu. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 6月, 2012 1 次提交
-
-
由 Heiko Carstens 提交于
Setting the cpu restart parameters is done in three different fashions: - directly setting the four parameters individually - copying the four parameters with memcpy (using 4 * sizeof(long)) - copying the four parameters using a private structure In addition code in entry*.S relies on a certain order of the restart members of struct _lowcore. Make all of this more robust to future changes by adding a mem_absolute_assign(dest, val) define, which assigns val to dest using absolute addressing mode. Also the load multiple instructions in entry*.S have been split into separate load instruction so the order of the struct _lowcore members doesn't matter anymore. In addition move the prototypes of memcpy_real/absolute from uaccess.h to processor.h. These memcpy* variants are not related to uaccess at all. string.h doesn't seem to match as well, so lets use processor.h. Also replace the eight byte array in struct _lowcore which represents a misaliged u64 with a u64. The compiler will always create code that handles the misaligned u64 correctly. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 05 6月, 2012 2 次提交
-
-
由 Sebastian Ott 提交于
The creator_id is no longer used. Just get rid of it. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The smp and the kvm code have different defines for the sigp order codes. Let's just have a single place where these are defined. Also move the sigp condition code and sigp cpu status bits to the new sigp.h header file. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 31 5月, 2012 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 30 5月, 2012 7 次提交
-
-
由 Heiko Carstens 提交于
On s390 access_ok is a macro which discards all parameters and always returns 1. This can result in compile warnings which warn about unused variables like this: fs/read_write.c: In function 'rw_copy_check_uvector': fs/read_write.c:684:16: warning: unused variable 'buf' [-Wunused-variable] Fix this by adding a __range_ok() function which consumes all parameters but still always returns 1. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
For 1 and 2 byte operands for xchg and cmpxchg the old and new values get or'ed into the larger 4 byte old value before the compare and swap instruction gets executed. This is done without using the proper byte mask before or'ing the values. If the caller passed in negative old or new values these got sign extended by the caller. Which in turn means that either the old value never matches, or, even worse, unrelated bytes would be changed in memory. Luckily there don't seem to be any callers around yet, since that would have resulted in the specification exception fixed in an earlies patch. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
When accessing a 1 or 2 byte memory operand we cannot use the passed address since the compare and swap instruction only works for 4 byte aligned memory operands. Hence we calculate an aligned address so that compare and swap works correctly. However we don't pass the calculated address to the inline assembly. This results in incorrect memory accesses and in a specification exception if used on non 4 byte aligned memory operands. Since this didn't happen until now, there don't seem to be too many users of cmpxchg on unaligned addresses. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The cmpxchg macros and functions are a bit different than on other architectures. In particular the macros do not store the return value of a __cmpxchg function call in a variable before returning the value. This causes compile warnings that only occur on s390 like this one: net/ipv4/af_inet.c: In function 'build_ehash_secret': net/ipv4/af_inet.c:241:2: warning: value computed is not used [-Wunused-value] To get rid of these warnings use the same construct that we already use for the xchg macro, which was introduced for the same reason. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
All cmpxchg functions imply a memory barrier. cmpxch64 did not have one for 31 bit code, so add it. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
It has been a big mistage to add the capabilities attribute to the cpus in sysfs: First the attribute only contains the cpu capability of primary cpus, which however is not necessarily (or better: unlikely) the type of cpu the kernel runs on, which is typically an IFL. In addition all information that is necessary is available in /proc/sysinfo already. So this attribute partially duplicated informations. So programs should look into the sysinfo file to retrieve all informations they are interested in. Since with this kernel release also the powersavings cpu attributes are removed this seems to be a good opportunity to remove another broken interface. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
This patch introduces the new function memcpy_absolute() that allows to copy memory using absolute addressing. This means that the prefix swap does not apply when this function is used. With this patch also all s390 kernel code that accesses absolute zero now uses the new memcpy_absolute() function. The old and less generic copy_to_absolute_zero() function is removed. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 24 5月, 2012 2 次提交
-
-
由 Heiko Carstens 提交于
Replace __s390x__ with CONFIG_64BIT in all places that are not exported to userspace or guarded with #ifdef __KERNEL__. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 23 5月, 2012 2 次提交
-
-
由 Hendrik Brueckner 提交于
CPU-measurement alerts are generated for different CPU-measurement facilities, for example, the sampling and counter facilities. Split the irq stats according to available facilities. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Because of a design change for stand-alone kdump the function that was done by the OS info init function is moved to the boot loader code. This has two implications that are implemented by this patch: a) The OS info init function is no longer called by the kernel b) The diag 308 subcode 1 reset is no longer done by the kdump boot code. This is necessary because otherwise the operation that is done now by the boot loader would be reversed. For the normal kexec based kdump mechansim the reset is already done by the kdump trigger code (e.g. panic or PSW restart). Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 18 5月, 2012 3 次提交
-
-
由 Jason J. herne 提交于
Enhance the KVM ONE_REG capability within S390 to allow getting/setting the following special cpu registers: clock comparator and the cpu timer. These are needed for migration. Signed-off-by: NJason J. herne <jjherne@us.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Carsten Otte 提交于
This patch makes vcpu epoch difference and the TOD programmable field accessible from userspace. This is needed in order to implement a couple of instructions that deal with the time of day clock on s390, such as SET CLOCK and for migration. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Christian Borntraeger 提交于
Currently qemu/kvm on s390 uses a guest mapping that does not allow the guest backing page table to be write-protected to support older systems. On those older systems a host write protection fault will be delivered to the guest. Newer systems allow to write-protect the guest backing memory and let the fault be delivered to the host, thus allowing COW. Use a capability bit to tell qemu if that is possible. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 17 5月, 2012 1 次提交
-
-
由 Suresh Siddha 提交于
Historical prepare_to_copy() is mostly a no-op, duplicated for majority of the architectures and the rest following the x86 model of flushing the extended register state like fpu there. Remove it and use the arch_dup_task_struct() instead. Suggested-by: NOleg Nesterov <oleg@redhat.com> Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1336692811-30576-1-git-send-email-suresh.b.siddha@intel.comAcked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <chris@zankel.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 16 5月, 2012 11 次提交
-
-
由 Sebastian Ott 提交于
Remove the old ccwgroup_create_from_string interface since all drivers have been converted to ccwgroup_create_dev. Also remove now unused members of ccwgroup_driver. Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Instead of finding devices via driver_find_device use the bus_find_device wrapper get_ccwdev_by_dev_id. This allows us to get rid of the ccw_driver argument of ccwgroup_create_dev and thus simplify the interface. Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Add a new interface for drivers to create a group device. Via the old interface ccwgroup_create_from_string we would create a virtual device in a way that only the caller of this function would match and bind to. Via the new ccwgroup_create_dev we stop playing games with the driver core and directly set the driver of the new group device. For drivers which have todo additional setup steps (like setting driver_data) provide a new setup driver callback. Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
If the kernel gets compiled for at least z196, make use of the fast-BCR facility. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
s390 really has no eieio instruction, so get rid of the implied ppc semantics and in addition change mb() into a function. Also remove SYNC_OTHER_CORES() since it is unused. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Use HAVE_MARCH_Z9_109_FEATURES to figure out if stckf is available at compile time. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The store clock fast instruction saves a couple of instructions compared to the store clock instruction. Always use stckf instead of stck if it is available. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Replace the check for TIF_SIE in the fault handler by a check for PF_VCPU. With the last user of TIF_SIE gone we can now remove the bit. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Currently dev/mem for s390 provides only real memory access. This means that the CPU prefix pages are swapped. The prefix swap for real memory works as follows: Each CPU owns a prefix register that points to a page aligned memory location "P". If this CPU accesses the address range [0,0x1fff], it is translated by the hardware to [P,P+0x1fff]. Accordingly if this CPU accesses the address range [P,P+0x1fff], it is translated by the hardware to [0,0x1fff]. Therefore, if [P,P+0x1fff] or [0,0x1fff] is read from the current /dev/mem device, the incorrectly swapped memory content is returned. With this patch the /dev/mem architecture code is modified to provide absolute memory access. This is done via the arch specific functions xlate_dev_mem_ptr() and unxlate_dev_mem_ptr(). For swapped pages on s390 the function xlate_dev_mem_ptr() now returns a new buffer with a copy of the requested absolute memory. In case the buffer was allocated, the unxlate_dev_mem_ptr() function frees it after /dev/mem code has called copy_to_user(). Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Glauber 提交于
Various improvements of qdio error reporting to the upper-layer drivers (qeth, zfcp): - Split QDIO_ERROR_ACTIVATE_CHECK_CONDITION into: QDIO_ERROR_ACTIVATE: qdio termination interrupt QDIO_ERROR_GET_BUF_STATE: QIOASSIST eqbs error QDIO_ERROR_SET_BUF_STATE: QIOASSIST sqbs error Add QDIO_ERROR_FATAL / QDIO_ERROR_TEMPORARY masks to ease recovery decision in upper-layer drivers. - Don't (ab-)use qdio handler errors as return codes for do_QDIO but use standard error codes: -ENOBUFS: temporary target CC=2 condition -EBUSY: unresolved SIGA-W CC=2 busy condition -EIO: I/O error (CC=1, CC=3) - Remove unneeded memory clobber from SIGA-R - Remove EX_TABLE entry on SIGA-W, we want to see these errors Reviewed-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Steffen Maier 提交于
Remove duplicate definition accidentally introduced in 104ea556 and re-group definitions nicely. Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 01 5月, 2012 1 次提交
-
-
由 Konstantin Weitz 提交于
This patch implements the directed yield hypercall found on other System z hypervisors. It delegates execution time to the virtual cpu specified in the instruction's parameter. Useful to avoid long spinlock waits in the guest. Christian Borntraeger: moved common code in virt/kvm/ Signed-off-by: NKonstantin Weitz <WEITZKON@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 26 4月, 2012 1 次提交
-
-
由 Thomas Gleixner 提交于
Preparatory patch to make the idle thread allocation for secondary cpus generic. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20120420124556.964170564@linutronix.de
-
- 11 4月, 2012 3 次提交
-
-
由 Martin Schwidefsky 提交于
The inline assembly in__arch_swab16p causes compile errors of the form: *error*: *invalid* '*asm*': operand number missing after %-*letter* The assembly uses the %O<n>/%R<n> notation but the first operand misses the operand number, it needs to be "%O1" instead of "%O". Reported-by: NGil Peleg <gilpeleg@servframe.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
The stfle() function writes into lowcore memory when stfl_fac_list is initialized with "S390_lowcore.stfl_fac_list = 0". For older compilers this triggers a lowcore exception. With newer compilers and "-OXX" compile option the bug does not show up because the "S390_lowcore.stfl_fac_list" initialization is removed by the compiler. The reason for thatis the incorrect "=m" (S390_lowcore.stfl_fac_list) constraint in the stfl inline assembly. The following shows the disassembly of the stfle() optimized code that is inlined in the lgr_info_get() function: 000000000011325c <lgr_info_get>: 11325c: eb 9f f0 60 00 24 stmg %r9,%r15,96(%r15) 113262: c0 d0 00 29 0e 47 larl %r13,634ef0 <servi..> 113268: a7 f1 3f c0 tml %r15,16320 11326c: b9 04 00 ef lgr %r14,%r15 113270: a7 84 00 01 je 113272 <lgr_info_g..> 113274: a7 fb ff c0 aghi %r15,-64 113278: b9 04 00 c2 lgr %r12,%r2 11327c: a7 29 00 01 lghi %r2,1 113280: e3 e0 f0 98 00 24 stg %r14,152(%r15) 113286: d7 97 c0 00 c0 00 xc 0(152,%r12),0(%r12) 11328c: c0 e5 00 28 db 4c brasl %r14,62e924 <add_e..> 113292: b2 b1 00 00 stfl 0 To fix the problem we now clear the S390_lowcore.stfl_fac_list at startup in "head.S" for all machine types before lowcore protection is enabled. In addition to that the "=m" constraint is replaced by "+m". Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Git commit 36409f63 "use generic RCU page-table freeing code" introduced a tlb flushing bug. Partially revert the above git commit and go back to s390 specific page table flush code. For s390 the TLB can contain three types of entries, "normal" TLB page-table entries, TLB combined region-and-segment-table (CRST) entries and real-space entries. Linux does not use real-space entries which leaves normal TLB entries and CRST entries. The CRST entries are intermediate steps in the page-table translation called translation paths. For example a 4K page access in a three-level page table setup will create two CRST TLB entries and one page-table TLB entry. The advantage of that approach is that a page access next to the previous one can reuse the CRST entries and needs just a single read from memory to create the page-table TLB entry. The disadvantage is that the TLB flushing rules are more complicated, before any page-table may be freed the TLB needs to be flushed. In short: the generic RCU page-table freeing code is incorrect for the CRST entries, in particular the check for mm_users < 2 is troublesome. This is applicable to 3.0+ kernels. Cc: <stable@vger.kernel.org> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 08 4月, 2012 1 次提交
-
-
由 Eric B Munson 提交于
When a host stops or suspends a VM it will set a flag to show this. The watchdog will use these functions to determine if a softlockup is real, or the result of a suspended VM. Signed-off-by: NEric B Munson <emunson@mgebm.net> asm-generic changes Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 30 3月, 2012 1 次提交
-
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <h.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 29 3月, 2012 2 次提交
-
-
由 David Howells 提交于
Delete all instances of asm/system.h as they should be redundant by this point. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Disintegrate asm/system.h for S390. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: linux-s390@vger.kernel.org
-