Currently we always redirty an inode that was attempted to be written out
synchronously but has been cleaned by an AIL pushed internall, which is
rather bogus.  Fix that by doing the i_update_core check early on and
return 0 for it.  Also include async calls for it, as doing any work for
those is just as pointless.  While we're at it also fix the sign for the
EIO return in case of a filesystem shutdown, and fix the completely
non-sensical locking around xfs_log_inode.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>
(cherry picked from commit 297db93bb74cf687510313eb235a7aec14d67e97)
Signed-off-by: NAlex Elder <aelder@sgi.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Use the move from Linux 2.6 to Linux 3.x as an excuse to kill the
annoying subdirectories in the XFS source code.  Besides the large
amount of file rename the only changes are to the Makefile, a few
files including headers with the subdirectory prefix, and the binary
sysctl compat code that includes a header under fs/xfs/ from
kernel/.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Convert the inode reclaim shrinker to use the new per-sb shrinker
operations. This allows much bigger reclaim batches to be used, and
allows the XFS inode cache to be shrunk in proportion with the VFS
dentry and inode caches. This avoids the problem of the VFS caches
being shrunk significantly before the XFS inode cache is shrunk
resulting in imbalances in the caches during reclaim.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove various bits left over from the old kdb-only btree tracing code, but
leave the actual trace point stubs in place to ease adding new event based
btree tracing.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Start the periodic sync workers only after we have finished xfs_mountfs
and thus fully set up the filesystem structures.  Without this we can
call into xfs_qm_sync before the quotainfo strucute is set up if the
mount takes unusually long, and probably hit other incomplete states
as well.

Also clean up the xfs_fs_fill_super error path by using consistent
label names, and removing an impossible to reach case.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NArkadiusz Miskiewicz <arekm@maven.pl>
Reviewed-by: NAlex Elder <aelder@sgi.com>

There's no reason not to support cache flushing on external log devices.
The only thing this really requires is flushing the data device first
both in fsync and log commits.  A side effect is that we also have to
remove the barrier write test during mount, which has been superflous
since the new FLUSH+FUA code anyway.  Also use the chance to flush the
RT subvolume write cache before the fsync commit, which is required
for correct semantics.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or
anything else, so that the filesystem can track internally if it
needs to push out a transaction for fdatasync or not.

This is just the prototype change with no user for it yet.  I plan
to push large XFS changes for the next merge window, and getting
this trivial infrastructure in this window would help a lot to avoid
tree interdependencies.

Also remove incorrect comments that ->dirty_inode can't block.  That
has been changed a long time ago, and many implementations rely on it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now that we have reliably tracking of deleted extents in a
transaction we can easily implement "online" discard support
which calls blkdev_issue_discard once a transaction commits.

The actual discard is a two stage operation as we first have
to mark the busy extent as not available for reuse before we
can start the actual discard.  Note that we don't bother
supporting discard for the non-delaylog mode.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

The workqueue initialisation function is called twice when
initialising the XFS subsystem. Remove the second initialisation
call.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

ia64 throws away .exit sections for the built-in CONFIG case, so routines
that are used in other circumstances should not be tagged as __exit.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Similar to the xfssyncd, the per-filesystem xfsaild threads can be
converted to a global workqueue and run periodically by delayed
works. This makes sense for the AIL pushing because it uses
variable timeouts depending on the work that needs to be done.

By removing the xfsaild, we simplify the AIL pushing code and
remove the need to spread the code to implement the threading
and pushing across multiple files.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>

On of the problems with the current inode flush at ENOSPC is that we
queue a flush per ENOSPC event, regardless of how many are already
queued. Thi can result in    hundreds of queued flushes, most of
which simply burn CPU scanned and do no real work. This simply slows
down allocation at ENOSPC.

We really only need one active flush at a time, and we can easily
implement that via the new xfs_syncd_wq. All we need to do is queue
a flush if one is not already active, then block waiting for the
currently active flush to complete. The result is that we only ever
have a single ENOSPC inode flush active at a time and this greatly
reduces the overhead of ENOSPC processing.

On my 2p test machine, this results in tests exercising ENOSPC
conditions running significantly faster - 042 halves execution time,
083 drops from 60s to 5s, etc - while not introducing test
regressions.

This allows us to remove the old xfssyncd threads and infrastructure
as they are no longer used.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>

All of the work xfssyncd does is background functionality. There is
no need for a thread per filesystem to do this work - it can al be
managed by a global workqueue now they manage concurrency
effectively.

Introduce a new gglobal xfssyncd workqueue, and convert the periodic
work to use this new functionality. To do this, use a delayed work
construct to schedule the next running of the periodic sync work
for the filesystem. When the sync work is complete, queue a new
delayed work for the next running of the sync work.

For laptop mode, we wait on completion for the sync works, so ensure
that the sync work queuing interface can flush and wait for work to
complete to enable the work queue infrastructure to replace the
current sequence number and wakeup that is used.

Because the sync work does non-trivial amounts of work, mark the
new work queue as CPU intensive.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>

During mount, we can do a quotacheck that involves a bulkstat pass
on all inodes. If there are more inodes in the filesystem than can
be held in memory, we require the inode cache shrinker to run to
ensure that we don't run out of memory.

Unfortunately, the inode cache shrinker is not registered until we
get to the end of the superblock setup process, which is after a
quotacheck is run if it is needed. Hence we need to register the
inode cache shrinker earlier in the mount process so that we don't
OOM during mount. This requires that we also initialise the syncd
work before we register the shrinker, so we nee dto juggle that
around as well.

While there, make sure that we have set up the block sizes in the
VFS superblock correctly before the quotacheck is run so that any
inodes that are cached as a result of the quotacheck have their
block size fields set up correctly.

Cc: stable@kernel.org
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NAlex Elder <aelder@sgi.com>

There is an ABBA deadlock between synchronous inode flushing in
xfs_reclaim_inode and xfs_icluster_free. xfs_icluster_free locks the
buffer, then takes inode ilocks, whilst synchronous reclaim takes
the ilock followed by the buffer lock in xfs_iflush().

To avoid this deadlock, separate the inode cluster buffer locking
semantics from the synchronous inode flush semantics, allowing
callers to attempt to lock the buffer but still issue synchronous IO
if it can get the buffer. This requires xfs_iflush() calls that
currently use non-blocking semantics to pass SYNC_TRYLOCK rather
than 0 as the flags parameter.

This allows xfs_reclaim_inode to avoid the deadlock on the buffer
lock and detect the failure so that it can drop the inode ilock and
restart the reclaim attempt on the inode. This allows
xfs_ifree_cluster to obtain the inode lock, mark the inode stale and
release it and hence defuse the deadlock situation. It also has the
pleasant side effect of avoiding IO in xfs_reclaim_inode when it
tries to next reclaim the inode as it is now marked stale.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>

Convert the files in fs/xfs/linux-2.6/ to use the new xfs_<level>
logging format that replaces the old Irix inherited cmn_err()
interfaces. While there, also convert naked printk calls to use the
relevant xfs logging function to standardise output format.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

To ensure the log is covered and the filesystem idles correctly, we
need to ensure that dummy transactions hit the disk and do not stay
pinned in memory.  If the superblock is pinned in memory, it can't
be flushed so the log covering cannot make progress. The result is
dependent on timing - more oftent han not we continue to issues a
log covering transaction every 36s rather than idling after ~90s.

Fix this by making the log covering transaction synchronous. To
avoid additional log force from xfssyncd, make the log covering
transaction take the place of the existing log force in the xfssyncd
background sync process.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

The xfaild often tries to rest to wait for congestion to pass of for
IO to complete, but is regularly woken in tail-pushing situations.
In severe cases, the xfsaild is getting woken tens of thousands of
times a second. Reduce the number needless wakeups by only waking
the xfsaild if the new target is larger than the old one. Further
make short sleeps uninterruptible as they occur when the xfsaild has
decided it needs to back off to allow some IO to complete and being
woken early is counter-productive.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The XFS iolock needs to be re-initialised to a new lock class before
it enters reclaim to prevent lockdep false positives. Unfortunately,
this is not sufficient protection as inodes in the XFS_IRECLAIMABLE
state can be recycled and not re-initialised before being reused.

We need to re-initialise the lock state when transfering out of
XFS_IRECLAIMABLE state to XFS_INEW, but we need to keep the same
class as if the inode was just allocated. Hence we need a specific
lockdep class variable for the iolock so that both initialisations
use the same class.

While there, add a specific class for inodes in the reclaim state so
that it is easy to tell from lockdep reports what state the inode
was in that generated the report.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().

blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.

All users are converted.  Most conversions are mechanical and don't
introduce any behavior difference.  There are several exceptions.

* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
  reason to OR it explicitly on blkdev_put().

* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
  sb->s_mode.

* With the above changes, sb->s_mode now always should contain
  FMODE_EXCL.  WARN_ON_ONCE() added to kill_block_super() to detect
  errors.

The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>

Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.

* blkdev_get/put() are the primary open and close functions.

* bd_claim/release() deal with exclusive open.

* open/close_bdev_exclusive() are combination of open and claim and
  the other way around, respectively.

* bd_link/unlink_disk_holder() to create and remove holder/slave
  symlinks.

* open_by_devnum() wraps bdget() + blkdev_get().

The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access.  Reorganize the interface such that,

* blkdev_get() is extended to include exclusive access management.
  @holder argument is added and, if is @FMODE_EXCL specified, it will
  gain exclusive access atomically w.r.t. other exclusive accesses.

* blkdev_put() is similarly extended.  It now takes @mode argument and
  if @FMODE_EXCL is set, it releases an exclusive access.  Also, when
  the last exclusive claim is released, the holder/slave symlinks are
  removed automatically.

* bd_claim/release() and close_bdev_exclusive() are no longer
  necessary and either made static or removed.

* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
  is no longer necessary and removed.

* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
  and blkdev_get().  It also has an unexpected extra bdev_read_only()
  test which probably should be moved into blkdev_get().

* open_by_devnum() is modified to take @holder argument and pass it to
  blkdev_get().

Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should).  This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.

open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features.  Well, let's leave them for another day.

Most conversions are straight-forward.  drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NNeil Brown <neilb@suse.de>
Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Acked-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>

We promised to do this for 2.6.37, and the code looks stable enough to
keep that promise.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

... and switch of the obvious get_sb_bdev() users to ->mount()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

__block_write_begin and block_prepare_write are identical except for slightly
different calling conventions.  Convert all callers to the __block_write_begin
calling conventions and drop block_prepare_write.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Stop having two different names for many buffer functions and use
the more descriptive xfs_buf_* names directly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

It used to have a place when it contained an automatically generated
CVS version, but these days it's entirely superflous.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Fail the mount if we can't allocate memory for the per-CPU counters.
This is consistent with how we handle everything else in the mount
path and makes the superblock counter modification a lot simpler.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Each buffer contains both a buftarg pointer and a mount pointer. If
we add a mount pointer into the buftarg, we can avoid needing the
b_mount field in every buffer and grab it from the buftarg when
needed instead. This shrinks the xfs_buf by 8 bytes.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>

Under heavy multi-way parallel create workloads, the VFS struggles
to write back all the inodes that have been changed in age order.
The bdi flusher thread becomes CPU bound, spending 85% of it's time
in the VFS code, mostly traversing the superblock dirty inode list
to separate dirty inodes old enough to flush.

We already keep an index of all metadata changes in age order - in
the AIL - and continued log pressure will do age ordered writeback
without any extra overhead at all. If there is no pressure on the
log, the xfssyncd will periodically write back metadata in ascending
disk address offset order so will be very efficient.

Hence we can stop marking VFS inodes dirty during transaction commit
or when changing timestamps during transactions. This will keep the
inodes in the superblock dirty list to those containing data or
unlogged metadata changes.

However, the timstamp changes are slightly more complex than this -
there are a couple of places that do unlogged updates of the
timestamps, and the VFS need to be informed of these. Hence add a
new function xfs_trans_ichgtime() for transactional changes,
and leave xfs_ichgtime() for the non-transactional changes.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

All the blkdev_issue_* helpers can only sanely be used for synchronous
caller.  To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead.  So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout.  For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

When we  need to cover the log, we issue dummy transactions to ensure
the current log tail is on disk. Unfortunately we currently use the
root inode in the dummy transaction, and the act of committing the
transaction dirties the inode at the VFS level.

As a result, the VFS writeback of the dirty inode will prevent the
filesystem from idling long enough for the log covering state
machine to complete. The state machine gets stuck in a loop issuing
new dummy transactions to cover the log and never makes progress.

To avoid this problem, the dummy transactions should not cause
externally visible state changes. To ensure this occurs, make sure
that dummy transactions log an unchanging field in the superblock as
it's state is never propagated outside the filesystem. This allows
the log covering state machine to complete successfully and the
filesystem now correctly enters a fully idle state about 90s after
the last modification was made.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Because of delayed updates to sb_icount field in the super block, it
is possible to allocate over maxicount number of inodes.  This
causes the arithmetic to calculate a negative number of free inodes
in user commands like df or stat -f.

Since maxicount is a somewhat arbitrary number, a slight over
allocation is not critical but user commands should be displayed as
0 or greater and never go negative.  To do this the value in the
stats buffer f_ffree is capped to never go negative.

[ Modified to use max_t as per Christoph's comment. ]
Signed-off-by: NStu Brodsky <sbrodsky@sgi.com>
Signed-off-by: NDave Chinner <dchinner@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Since Linux 2.6.33 the kernel has support for real O_SYNC, which made
the osyncisosync option a no-op.  Warn the users about this and remove
the mount flag for it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

I missed Dave Chinner's second revision of this change, and pushed
his first version out to the repository instead.

	commit a476c59ebb279d738718edc0e3fb76aab3687114
	Author: Dave Chinner <dchinner@redhat.com>

This commit compensates for that by moving a block of code up a bit
further, with a result that matches the the effect of Dave's second
version.

Dave's first version was:
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Dave's second version was:
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>

Currently we don't remove the XFS mount from the shrinker list until
late in the unmount path. By this time, we have already torn down
the internals of the filesystem (e.g. the per-ag structures), and
hence if the shrinker is executed between the teardown and the
unregistering, the shrinker will get NULL per-ag structure pointers
and panic trying to dereference them.

Fix this by removing the xfs mount from the shrinker list before
tearing down it's internal structures.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Replace the xfs_itrace_entry catchall with specific trace points.  For
most simple callers we now use the simple inode class, which used to
be the iget class, but add more details tracing for namespace events,
which now includes the name of the directory entries manipulated.

Remove the xfs_inactive trace point, which is a duplicate of the clear_inode
one, and the xfs_change_file_space trace point, which is immediately
followed by the more specific alloc/free space trace points.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>